Diff: main.cpp

Revision:

0:c407693ac016

diff -r 000000000000 -r c407693ac016 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Jul 24 13:48:24 2015 +0000
@@ -0,0 +1,169 @@
+/**
+ * Current Log-O-Matic
+ * Author: Shawn Hymel @ SparkFun Electronics
+ * Date: July 1, 2015
+ *
+ * Measures current using an INA169 breakout board. Stores current and timestamp
+ * to an SD card.
+ *
+ * INA169 Vout -> Pin 15
+ * SD Card DI -> Pin 5
+ * SD Card DO -> Pin 6
+ * SD Card SCK -> Pin 7
+ * SD Card CS -> Pin 8
+ *
+ * This code is beerware; if you see me (or any other SparkFun 
+ * employee) at the local, and you've found our code helpful, please
+ * buy us a round!
+ *
+ * Distributed as-is; no warranty is given.
+ */
+ 
+#include "mbed.h"
+#include "SDFileSystem.h"
+
+#define DEBUG       1       // 1 to print to console. 0 to turn off.
+#define MAX_FILES   100     // Maximum number of log files to store on SD
+#define DELAY_MS    0.02    // Time between samples (in seconds)
+#define NUM_SAMPLES 500     // Number of samples to collect
+#define RS          0.5     // Value of RS (sensing resistor) in ohms
+#define RL          10000   // Value of RL (output resistor) in ohms
+
+// Digital output (status LED)
+DigitalOut status_led(LED1);
+
+// Analog input (pin 15)
+AnalogIn ain(p15);
+
+// USB serial (tx, rx)
+Serial pc(USBTX, USBRX);
+
+// SD card (SPI pins)
+SDFileSystem sd(p5, p6, p7, p8, "sd");
+
+// Global variables
+const char file_root[] = "idata";
+const char file_suffix[] = ".csv";
+char filename[20];
+Timer timer;
+
+// Return true if file (or directory) 'filename' is present in directory 'root'
+// Based on: https://developer.mbed.org/forum/mbed/topic/463/
+bool exists(char * root, char *filename)
+{
+    DIR *d = opendir(root);
+    struct dirent *p;
+    bool found = false;
+    if ( d != NULL )
+    {
+        while ( !found && (p = readdir(d)) != NULL )
+        {
+            if ( strcmp(p->d_name, filename) == 0 )
+                found = true;
+        }
+    }
+    closedir(d);
+    return found;
+}
+
+// Main
+int main( void )
+{
+    FILE *file;
+    char str[5];
+    int i;
+    int led_state;
+    float voltage_in;
+    float current;
+    float timestamp;
+    
+    // Debugging start
+#if DEBUG == 1
+    printf("\n\r");
+    printf("-------------------\n\r");
+    printf("Current Log-O-Matic\n\r");
+    printf("-------------------\n\r");
+#endif
+    
+    // Create next file in sequence
+    for ( i = 0; i < MAX_FILES; i++ ) {
+           
+        // Construct filename
+        strcpy(filename, file_root);
+        sprintf(str, "%d", i);
+        strcat(filename, str);
+        strcat(filename, file_suffix);
+    
+        // If file exists, skip to next. If not, create it.
+        if ( exists("/sd", filename) ) {
+#if DEBUG == 1
+            printf ("%s found\n\r", filename);
+#endif
+            if ( i == (MAX_FILES - 1) ) {
+                error("ERROR: Too many files!\n\r");
+                return -1;
+            }
+        } else {
+#if DEBUG == 1
+            printf ("%s not found. Creating.\n\r", filename);
+#endif
+            break;
+        }
+    }
+        
+    // Construct absolute path to file
+    strcpy(filename, "/sd/");
+    strcat(filename, file_root);
+    sprintf(str, "%d", i);
+    strcat(filename, str);
+    strcat(filename, file_suffix);
+    
+    // Open file for writing
+#if DEBUG == 1
+    printf("Opening %s\n\r", filename);
+#endif
+    file = fopen(filename, "w");
+    if ( file == NULL ) {
+        error("ERROR: Could not open file for writing!\n\r");
+        return -1;
+    }
+    
+    // Write header to file
+    fprintf(file, "Time,Current\n\r");
+        
+    // Start timer and begin sampling
+    led_state = 0;
+#if DEBUG == 1
+    printf("Sampling. Do not remove SD card!\n\r");
+#endif
+    timer.start();
+    for ( i = 0; i < NUM_SAMPLES; i++ ) {
+        
+        // Write data to csv file
+        timestamp = timer.read();
+        voltage_in = ain * 3.3;
+        current = (voltage_in * 1000) / (RS * RL);
+        fprintf(file, "%2.2f,%1.3f\n", timestamp, current);
+#if DEBUG == 1
+        printf("%2.2f, %1.3f\n\r", timestamp, current);
+#endif
+
+        // Toggle LED to show logging
+        led_state ^= 1;
+        status_led = led_state;
+        
+        // Wait until next sample cycle as defined by sample delay
+        while ( (timer.read() - timestamp) < DELAY_MS );
+    }
+    
+    // Close file
+#if DEBUG == 1
+    printf("Done! Closing file");
+#endif
+    fclose(file);
+    
+    // Turn off LED to show done
+    status_led = 0;
+    
+    return 0;
+}
\ No newline at end of file