File content as of revision 0:2f1caf4ce924:

#include "mbed.h"
#include "DisplayBace.h"
#include "USBHostMSD.h"
#include "bitmap.h"
#if defined(TARGET_RZ_A1H)
#include "usb_host_setting.h"
#else
#define USB_HOST_CH     0
#endif

#define VIDEO_CVBS             (0)                 /* Analog  Video Signal */
#define VIDEO_CMOS_CAMERA      (1)                 /* Digital Video Signal */
#define VIDEO_YCBCR422         (0)
#define VIDEO_RGB888           (1)
#define VIDEO_RGB565           (2)

/**** User Selection *********/
#define VIDEO_INPUT_METHOD     (VIDEO_CVBS)        /* Select  VIDEO_CVBS or VIDEO_CMOS_CAMERA                       */
#define VIDEO_INPUT_FORMAT     (VIDEO_RGB888)      /* Select  VIDEO_YCBCR422 or VIDEO_RGB888 or VIDEO_RGB565        */
#define USE_VIDEO_CH           (0)                 /* Select  0 or 1            If selecting VIDEO_CMOS_CAMERA, should be 0.)               */
#define VIDEO_PAL              (0)                 /* Select  0(NTSC) or 1(PAL) If selecting VIDEO_CVBS, this parameter is not referenced.) */
/*****************************/

#if USE_VIDEO_CH == (0)
#define VIDEO_INPUT_CH         (DisplayBase::VIDEO_INPUT_CHANNEL_0)
#define VIDEO_INT_TYPE         (DisplayBase::INT_TYPE_S0_VFIELD)
#else
#define VIDEO_INPUT_CH         (DisplayBase::VIDEO_INPUT_CHANNEL_1)
#define VIDEO_INT_TYPE         (DisplayBase::INT_TYPE_S1_VFIELD)
#endif

#if ( VIDEO_INPUT_FORMAT == VIDEO_YCBCR422 || VIDEO_INPUT_FORMAT == VIDEO_RGB565 )
#define DATA_SIZE_PER_PIC      (2u)
#else
#define DATA_SIZE_PER_PIC      (4u)
#endif

/*! Frame buffer stride: Frame buffer stride should be set to a multiple of 32 or 128
    in accordance with the frame buffer burst transfer mode. */
#define PIXEL_HW               (320u)  /* QVGA */
#define PIXEL_VW               (240u)  /* QVGA */
#define VIDEO_BUFFER_STRIDE    (((PIXEL_HW * DATA_SIZE_PER_PIC) + 31u) & ~31u)
#define VIDEO_BUFFER_HEIGHT    (PIXEL_VW)

#if (USB_HOST_CH == 1) //Audio Camera Shield USB1
DigitalOut usb1en(P3_8);
#endif
DigitalOut led1(LED1);
DigitalIn  button(USER_BUTTON0);

static uint8_t FrameBuffer_Video_A[VIDEO_BUFFER_STRIDE * VIDEO_BUFFER_HEIGHT]__attribute((section("NC_BSS"),aligned(16)));  //16 bytes aligned!;
static uint8_t FrameBuffer_Video_B[VIDEO_BUFFER_STRIDE * VIDEO_BUFFER_HEIGHT]__attribute((section("NC_BSS"),aligned(16)));  //16 bytes aligned!;
static volatile int32_t vsync_count;
static volatile int32_t vfield_count;

/**************************************************************************//**
 * @brief       Interrupt callback function
 * @param[in]   int_type    : VDC5 interrupt type
 * @retval      None
******************************************************************************/
static void IntCallbackFunc_Vfield(DisplayBase::int_type_t int_type)
{
    if (vfield_count > 0) {
        vfield_count--;
    }
}

/**************************************************************************//**
 * @brief       Wait for the specified number of times Vsync occurs
 * @param[in]   wait_count          : Wait count
 * @retval      None
******************************************************************************/
static void WaitVfield(const int32_t wait_count)
{
    vfield_count = wait_count;
    while (vfield_count > 0) {
        /* Do nothing */
    }
}

/**************************************************************************//**
 * @brief       Interrupt callback function for Vsync interruption
 * @param[in]   int_type    : VDC5 interrupt type
 * @retval      None
******************************************************************************/
static void IntCallbackFunc_Vsync(DisplayBase::int_type_t int_type)
{
    if (vsync_count > 0) {
        vsync_count--;
    }
}

/**************************************************************************//**
 * @brief       Wait for the specified number of times Vsync occurs
 * @param[in]   wait_count          : Wait count
 * @retval      None
******************************************************************************/
static void WaitVsync(const int32_t wait_count)
{
    vsync_count = wait_count;
    while (vsync_count > 0) {
        /* Do nothing */
    }
}

/**************************************************************************//**
 * @brief
 * @param[in]   void
 * @retval      None
******************************************************************************/
int main(void)
{
    DisplayBase::graphics_error_t error;
    uint8_t * write_buff_addr = FrameBuffer_Video_A;
    uint8_t * save_buff_addr  = FrameBuffer_Video_B;

#if VIDEO_INPUT_METHOD == VIDEO_CMOS_CAMERA
    DisplayBase::video_ext_in_config_t ext_in_config;
    PinName cmos_camera_pin[11] = {
        /* data pin */
        P2_7, P2_6, P2_5, P2_4, P2_3, P2_2, P2_1, P2_0,
        /* control pin */
        P10_0,      /* DV0_CLK   */
        P1_0,       /* DV0_Vsync */
        P1_1        /* DV0_Hsync */
    };
#endif

    /* Create DisplayBase object */
    DisplayBase Display;

    /* Graphics initialization process */
    error = Display.Graphics_init(NULL);
    if (error != DisplayBase::GRAPHICS_OK) {
        printf("Line %d, error %d\n", __LINE__, error);
        while (1);
    }

#if VIDEO_INPUT_METHOD == VIDEO_CVBS
    error = Display.Graphics_Video_init( DisplayBase::INPUT_SEL_VDEC, NULL);
    if( error != DisplayBase::GRAPHICS_OK ) {
        while(1);
    }

#elif VIDEO_INPUT_METHOD == VIDEO_CMOS_CAMERA
    /* MT9V111 camera input config */
    ext_in_config.inp_format     = DisplayBase::VIDEO_EXTIN_FORMAT_BT601; /* BT601 8bit YCbCr format */
    ext_in_config.inp_pxd_edge   = DisplayBase::EDGE_RISING;              /* Clock edge select for capturing data          */
    ext_in_config.inp_vs_edge    = DisplayBase::EDGE_RISING;              /* Clock edge select for capturing Vsync signals */
    ext_in_config.inp_hs_edge    = DisplayBase::EDGE_RISING;              /* Clock edge select for capturing Hsync signals */
    ext_in_config.inp_endian_on  = DisplayBase::OFF;                      /* External input bit endian change on/off       */
    ext_in_config.inp_swap_on    = DisplayBase::OFF;                      /* External input B/R signal swap on/off         */
    ext_in_config.inp_vs_inv     = DisplayBase::SIG_POL_NOT_INVERTED;     /* External input DV_VSYNC inversion control     */
    ext_in_config.inp_hs_inv     = DisplayBase::SIG_POL_INVERTED;         /* External input DV_HSYNC inversion control     */
    ext_in_config.inp_f525_625   = DisplayBase::EXTIN_LINE_525;           /* Number of lines for BT.656 external input */
    ext_in_config.inp_h_pos      = DisplayBase::EXTIN_H_POS_CRYCBY;       /* Y/Cb/Y/Cr data string start timing to Hsync reference */
    ext_in_config.cap_vs_pos     = 6;                                     /* Capture start position from Vsync */
    ext_in_config.cap_hs_pos     = 150;                                   /* Capture start position form Hsync */
    ext_in_config.cap_width      = 640;                                   /* Capture width  */
    ext_in_config.cap_height     = 468u;                                  /* Capture height Max 468[line]
                                                                             Due to CMOS(MT9V111) output signal timing and VDC5 specification */
    error = Display.Graphics_Video_init( DisplayBase::INPUT_SEL_EXT, &ext_in_config);
    if( error != DisplayBase::GRAPHICS_OK ) {
        printf("Line %d, error %d\n", __LINE__, error);
        while(1);
    }

    /* MT9V111 camera input port setting */
    error = Display.Graphics_Dvinput_Port_Init(cmos_camera_pin, 11);
    if( error != DisplayBase::GRAPHICS_OK ) {
        printf("Line %d, error %d\n", __LINE__, error);
        while (1);
    }
#endif

    /* Interrupt callback function setting (Vsync signal input to scaler 0) */
    error = Display.Graphics_Irq_Handler_Set(DisplayBase::INT_TYPE_S0_VI_VSYNC, 0, IntCallbackFunc_Vsync);
    if (error != DisplayBase::GRAPHICS_OK) {
        printf("Line %d, error %d\n", __LINE__, error);
        while (1);
    }
    /* Video capture setting (progressive form fixed) */
    error = Display.Video_Write_Setting(
                VIDEO_INPUT_CH,
#if VIDEO_PAL == 0
                DisplayBase::COL_SYS_NTSC_358,
#else
                DisplayBase::COL_SYS_PAL_443,
#endif
                write_buff_addr,
                VIDEO_BUFFER_STRIDE,
#if VIDEO_INPUT_FORMAT == VIDEO_YCBCR422
                DisplayBase::VIDEO_FORMAT_YCBCR422,
                DisplayBase::WR_RD_WRSWA_NON,
#elif VIDEO_INPUT_FORMAT == VIDEO_RGB565
                DisplayBase::VIDEO_FORMAT_RGB565,
                DisplayBase::WR_RD_WRSWA_32_16BIT,
#else
                DisplayBase::VIDEO_FORMAT_RGB888,
                DisplayBase::WR_RD_WRSWA_32BIT,
#endif
                PIXEL_VW,
                PIXEL_HW
            );
    if (error != DisplayBase::GRAPHICS_OK) {
        printf("Line %d, error %d\n", __LINE__, error);
        while (1);
    }

    /* Interrupt callback function setting (Field end signal for recording function in scaler 0) */
    error = Display.Graphics_Irq_Handler_Set(VIDEO_INT_TYPE, 0, IntCallbackFunc_Vfield);
    if (error != DisplayBase::GRAPHICS_OK) {
        printf("Line %d, error %d\n", __LINE__, error);
        while (1);
    }

    /* Video write process start */
    error = Display.Video_Start (VIDEO_INPUT_CH);
    if (error != DisplayBase::GRAPHICS_OK) {
        printf("Line %d, error %d\n", __LINE__, error);
        while (1);
    }

    /* Video write process stop */
    error = Display.Video_Stop (VIDEO_INPUT_CH);
    if (error != DisplayBase::GRAPHICS_OK) {
        printf("Line %d, error %d\n", __LINE__, error);
        while (1);
    }

    /* Video write process start */
    error = Display.Video_Start (VIDEO_INPUT_CH);
    if (error != DisplayBase::GRAPHICS_OK) {
        printf("Line %d, error %d\n", __LINE__, error);
        while (1);
    }

    /* Wait vsync to update resister */
    WaitVsync(1);

    /* Wait 2 Vfield(Top or bottom field) */
    WaitVfield(2);

#if (USB_HOST_CH == 1) //Audio Shield USB1
    //Audio Shield USB1 enable
    usb1en = 1;        //Outputs high level
    Thread::wait(5);
    usb1en = 0;        //Outputs low level
#endif
    USBHostMSD msd("usb");
    char file_name[32];
    int file_name_index = 0;
    int save_file_size;

    while (1) {
        /* button check */
        if (button == 0) {
            led1 = 1;
            if (write_buff_addr == FrameBuffer_Video_A) {
                write_buff_addr = FrameBuffer_Video_B;
                save_buff_addr  = FrameBuffer_Video_A;
            } else {
                write_buff_addr = FrameBuffer_Video_A;
                save_buff_addr  = FrameBuffer_Video_B;
            }

            /* Change write buffer */
            error = Display.Video_Write_Change(
                        VIDEO_INPUT_CH,
                        write_buff_addr,
                        VIDEO_BUFFER_STRIDE);
            if (error != DisplayBase::GRAPHICS_OK) {
                printf("Line %d, error %d\n", __LINE__, error);
                while (1);
            }
            /* Wait 2 Vfield(Top or bottom field) */
            WaitVfield(2);

            /* FrameBuffer_Video_AorB capture completed */
            /* USB connect check */
            while (!msd.connected()) {
                if (!msd.connect()) {
                    Thread::wait(500);
                } else {
                    break;
                }
            }

            /* Data save */
#if ( VIDEO_INPUT_FORMAT == VIDEO_YCBCR422 || VIDEO_INPUT_FORMAT == VIDEO_RGB565 )
            /* Save ".bin" file */
            sprintf(file_name, "/usb/video_%d.bin", file_name_index++);
            FILE * fp = fopen(file_name, "w");
            save_file_size = fwrite(save_buff_addr, sizeof(char), (VIDEO_BUFFER_STRIDE * VIDEO_BUFFER_HEIGHT), fp);
            fclose(fp);
#else
            /* Save ".bmp" file */
            sprintf(file_name, "/usb/video_%d.bmp", file_name_index++);

            bitmap bitmapfile;
            save_file_size = bitmapfile.Rgb888ToBmp(file_name, save_buff_addr, PIXEL_HW, PIXEL_VW);
#endif
            printf("file name %s, file size %d\n", file_name, save_file_size);
            led1 = 0;
        }
    }
}