Motoo Tanaka / Mbed 2 deprecated Dentaku Featured

Simple integer calculator using FRDM-KL25Z and Adafruit 2.8" TFT with touch \\ "Dentaku" means "Desktop Calculator" in Japanese \\ On 5-Dec-2015, Support for FRDM-K64F, FRDM-K22F, NUCLEO-F411RE added.

Dependencies:   SPI_STMPE610 UniGraphic mbed vt100

Yet another simple desktop calculator program, only for integer.
As usual I used FRDM-KL25Z, Adafruit 2.8" TFT with touch and UniGraphic library.
Now works with FRDM-K64F, FRDM-K22F, and NUCLEO-F411RE.

整数計算のみの簡単な電卓プログラムです。
例によって、FRDM-KL25Z, Adafruit 2.8" TFT with touch, そして UniGraphic を使用しています。
FRDM-K64F, FRDM-K22F, NUCLEO-F411RE でも動くようになりました。

/media/uploads/Rhyme/img_1194.jpg

Diff: main.h

Revision:
0:659a74b77279
Child:
2:ddf8d8fffb4f
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.h	Sun Aug 02 14:00:59 2015 +0000
@@ -0,0 +1,101 @@
+/** mbed oscilloscope my implementation of a oscillo scope
+ * Copyright (c) 2014, 2015 Motoo Tanaka @ Design Methodology Lab
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#ifndef _MAIN_H_
+#define _MAIN_H_ inluded
+
+// uncomment following line if K64F rev is E or later
+#define FRDM_K64F_VE
+
+#if   defined (TARGET_KL25Z) 
+#define PIN_MOSI        PTD2
+#define PIN_MISO        PTD3 
+#define PIN_SCLK        PTD1 
+#define PIN_CS_TFT      PTD0 
+#define PIN_DC_TFT      PTD5 
+#define PIN_BL_TFT      PTC9 
+#define PIN_CS_SD       PTA4 
+#define PIN_CS_TSC      PTA13
+#define PIN_TSC_INTR    PTC9
+#define PIN_RESET_TFT   PTB10
+#define PIN_ADC_CH0     PTB0
+#define PIN_ADC_CH1     PTB1
+
+#elif defined (TARGET_KL46Z)
+#define PIN_MOSI        PTD6
+#define PIN_MISO        PTD7 
+#define PIN_SCLK        PTD5 
+#define PIN_CS_TFT      PTD4 
+#define PIN_DC_TFT      PTD2 
+#define PIN_BL_TFT      PTC9 
+#define PIN_CS_SD       PTA4 
+#define PIN_CS_TSC      PTA13
+#define PIN_TSC_INTR    PTC9
+#define PIN_RESET_TFT   PTA20
+#define PIN_ADC_CH0     PTB0
+#define PIN_ADC_CH1     PTB1
+
+#elif defined (TARGET_K64F)
+#define PIN_MOSI        PTD2
+#define PIN_MISO        PTD3
+#define PIN_SCLK        PTD1
+#define PIN_CS_TFT      PTD0
+#define PIN_DC_TFT      PTC4
+#define PIN_BL_TFT      PTC3
+#define PIN_CS_SD       PTB23
+#ifdef FRDM_K64F_VE
+#define PIN_CS_TSC      PTC12
+#else
+#define PIN_CS_TSC      PTA0
+#endif
+#define PIN_TSC_INTR    PTC3
+#define PIN_RESET_TFT   PTB20
+#define PIN_ADC_CH0     PTB2
+#define PIN_ADC_CH1     PTB3
+
+#else
+  #error TARGET NOT DEFINED
+#endif
+
+#define CHART_LEN    198
+
+// NOTE: in case MIN_INTERVAL is too small
+// the program hangs during ADC and timer interrupt
+#define MIN_INTERVAL   30
+#define MAX_INTERVAL   20000
+#define NUM_MAX_MENU   20
+#define NUM_MAX_ANALOG_CH 2
+#define MODE_RUN 1 
+#define MODE_STOP 0
+
+#define opPlus 0
+#define opMinus 1
+#define opMul 2
+#define opDiv 3
+
+
+extern vt100 tty ;
+extern AnalogIn *ach[] ;
+extern Ticker timer ;
+
+extern DigitalOut backlight ;
+extern ILI9341 TFT ;
+extern SPI_STMPE610 TSC ;
+extern TFTMenuItem *menu[] ;
+extern int numMenu ;
+
+extern int num_digit ;
+extern long prevValue ;
+extern long topValue ;
+extern int op ;
+
+void display(char *label = 0) ;
+#endif /* _MAIN_H_ */
\ No newline at end of file