RITVIK DAVE
IOT_LAB_Surface_level_Rx
Dependencies: MMA8451Q mbed nRF24L01P
Revision 0:dc7dc4c8d832, committed 2017-04-04
- Comitter:
- RITVIK_DAVE
- Date:
- Tue Apr 04 05:08:36 2017 +0000
- Commit message:
- completed
Changed in this revision
diff -r 000000000000 -r dc7dc4c8d832 MMA8451Q.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MMA8451Q.lib Tue Apr 04 05:08:36 2017 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/emilmont/code/MMA8451Q/#c4d879a39775
diff -r 000000000000 -r dc7dc4c8d832 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Tue Apr 04 05:08:36 2017 +0000
@@ -0,0 +1,64 @@
+#include "mbed.h"
+#include "nRF24L01P.h"
+BusOut LED(PTA5,PTA12, PTC8);
+Serial pc(USBTX, USBRX); // tx, rx
+
+
+nRF24L01P my_nrf24l01p(PTD2, PTD3, PTD1, PTD0, PTD5, PTD4); // mosi, miso, sck, csn, ce, irq
+//DigitalOut GreenLED(PTA12);
+
+
+int main() {
+
+ char count[1];
+ char RxDataCnt;
+ char temp;
+
+ //float x,y,z,POT,LDR;
+
+ my_nrf24l01p.powerUp();
+ my_nrf24l01p.setRfFrequency(2445);
+
+ // Display the (default) setup of the nRF24L01+ chip
+ pc.printf( "nRF24L01+ Frequency : %d MHz\r\n", my_nrf24l01p.getRfFrequency() );
+ pc.printf( "nRF24L01+ Output power : %d dBm\r\n", my_nrf24l01p.getRfOutputPower() );
+ pc.printf( "nRF24L01+ Data Rate : %d kbps\r\n", my_nrf24l01p.getAirDataRate() );
+ pc.printf( "nRF24L01+ TX Address : 0x%010llX\r\n", my_nrf24l01p.getTxAddress() );
+ pc.printf( "nRF24L01+ RX Address : 0x%010llX\r\n", my_nrf24l01p.getRxAddress() );
+
+ pc.printf( "Simple 3 Byte Receiver\r\n" );
+
+ RxDataCnt = 1;
+ my_nrf24l01p.setTransferSize( RxDataCnt );
+
+ my_nrf24l01p.setReceiveMode();
+ my_nrf24l01p.enable();
+
+ while (1) {
+
+ // If we've received anything in the nRF24L01+...
+ if ( my_nrf24l01p.readable() ) {
+
+ // ...read the data into the receive buffer
+ temp = my_nrf24l01p.read( NRF24L01P_PIPE_P0, count, RxDataCnt );
+
+ pc.printf( "Cnt %d = level-->%d \r\n",temp,count[0]);
+ if(count[0]==0)
+ { LED=0x06;
+ pc.printf("surface is Level\r");
+ }
+ else if(count[0]==1)
+ { LED=0x05;
+ pc.printf("surface is close to Level\r");
+ }
+ else
+ { LED=0x03;
+ pc.printf("Emergency\r");
+ }
+
+ // Toggle LED2 (to help debug nRF24L01+ -> Host communication)
+ //GreenLED = !GreenLED;
+ wait_ms(0.01);
+ }
+ }
+}
\ No newline at end of file
diff -r 000000000000 -r dc7dc4c8d832 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Tue Apr 04 05:08:36 2017 +0000 @@ -0,0 +1,1 @@ +https://mbed.org/users/mbed_official/code/mbed/builds/856d2700e60b \ No newline at end of file
diff -r 000000000000 -r dc7dc4c8d832 nRF24L01P.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/nRF24L01P.lib Tue Apr 04 05:08:36 2017 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Owen/code/nRF24L01P/#8ae48233b4e4