Diff: main.cpp

Revision:

0:dc7dc4c8d832

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Apr 04 05:08:36 2017 +0000
@@ -0,0 +1,64 @@
+#include "mbed.h"
+#include "nRF24L01P.h"
+BusOut LED(PTA5,PTA12, PTC8);
+Serial pc(USBTX, USBRX); // tx, rx
+
+
+nRF24L01P my_nrf24l01p(PTD2, PTD3, PTD1, PTD0, PTD5, PTD4);    // mosi, miso, sck, csn, ce, irq
+//DigitalOut GreenLED(PTA12);
+
+
+int main() {
+    
+    char count[1];
+    char RxDataCnt;
+    char temp;
+    
+    //float x,y,z,POT,LDR;
+    
+    my_nrf24l01p.powerUp();
+    my_nrf24l01p.setRfFrequency(2445);
+
+    // Display the (default) setup of the nRF24L01+ chip
+    pc.printf( "nRF24L01+ Frequency    : %d MHz\r\n",  my_nrf24l01p.getRfFrequency() );
+    pc.printf( "nRF24L01+ Output power : %d dBm\r\n",  my_nrf24l01p.getRfOutputPower() );
+    pc.printf( "nRF24L01+ Data Rate    : %d kbps\r\n", my_nrf24l01p.getAirDataRate() );
+    pc.printf( "nRF24L01+ TX Address   : 0x%010llX\r\n", my_nrf24l01p.getTxAddress() );
+    pc.printf( "nRF24L01+ RX Address   : 0x%010llX\r\n", my_nrf24l01p.getRxAddress() );
+
+    pc.printf( "Simple 3 Byte Receiver\r\n" );
+    
+    RxDataCnt = 1;
+    my_nrf24l01p.setTransferSize( RxDataCnt );
+    
+    my_nrf24l01p.setReceiveMode();
+    my_nrf24l01p.enable();
+
+    while (1) {
+
+        // If we've received anything in the nRF24L01+...
+        if ( my_nrf24l01p.readable() ) {
+
+            // ...read the data into the receive buffer
+            temp = my_nrf24l01p.read( NRF24L01P_PIPE_P0, count, RxDataCnt );
+            
+            pc.printf( "Cnt %d = level-->%d \r\n",temp,count[0]);
+            if(count[0]==0)
+            {  LED=0x06;
+               pc.printf("surface is Level\r");
+                }
+            else if(count[0]==1)
+            {   LED=0x05;
+           pc.printf("surface is close to Level\r");
+                }
+            else
+            {  LED=0x03;
+           pc.printf("Emergency\r");
+                }
+
+            // Toggle LED2 (to help debug nRF24L01+ -> Host communication)
+            //GreenLED = !GreenLED;
+            wait_ms(0.01);
+        }
+    }
+}
\ No newline at end of file