Library SX1276 Pinout for DISCO_B_L072CZ-LRWAN1 Board

Fork of SX1276Lib by Semtech

Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers radio.h Source File

radio.h

00001 /*
00002  / _____)             _              | |
00003 ( (____  _____ ____ _| |_ _____  ____| |__
00004  \____ \| ___ |    (_   _) ___ |/ ___)  _ \
00005  _____) ) ____| | | || |_| ____( (___| | | |
00006 (______/|_____)_|_|_| \__)_____)\____)_| |_|
00007     (C) 2014 Semtech
00008 
00009 Description: Interface for the radios, contains the main functions that a radio needs, and 5 callback functions
00010 
00011 License: Revised BSD License, see LICENSE.TXT file include in the project
00012 
00013 Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin
00014 */
00015 #ifndef __RADIO_H__
00016 #define __RADIO_H__
00017 
00018 #include "mbed.h"
00019 
00020 #include "./enums/enums.h"
00021 
00022 /*!
00023  * @brief Radio driver callback functions
00024  */
00025 typedef struct
00026 {
00027     /*!
00028      * @brief  Tx Done callback prototype.
00029      */
00030     void    ( *TxDone )( void );
00031     /*!
00032      * @brief  Tx Timeout callback prototype.
00033      */
00034     void    ( *TxTimeout )( void );
00035     /*!
00036      * @brief Rx Done callback prototype.
00037      *
00038      * @param [IN] payload Received buffer pointer
00039      * @param [IN] size    Received buffer size
00040      * @param [IN] rssi    RSSI value computed while receiving the frame [dBm]
00041      * @param [IN] snr     Raw SNR value given by the radio hardware
00042      *                     FSK : N/A ( set to 0 )
00043      *                     LoRa: SNR value in dB
00044      */
00045     void    ( *RxDone )( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr );
00046     /*!
00047      * @brief  Rx Timeout callback prototype.
00048      */
00049     void    ( *RxTimeout )( void );
00050     /*!
00051      * @brief Rx Error callback prototype.
00052      */
00053     void    ( *RxError )( void );
00054     /*!
00055      * \brief  FHSS Change Channel callback prototype.
00056      *
00057      * \param [IN] currentChannel   Index number of the current channel
00058      */
00059     void ( *FhssChangeChannel )( uint8_t currentChannel );
00060     /*!
00061      * @brief CAD Done callback prototype.
00062      *
00063      * @param [IN] channelDetected    Channel Activity detected during the CAD
00064      */
00065     void ( *CadDone ) ( bool channelActivityDetected );
00066 }RadioEvents_t;
00067 
00068 /*!
00069  *    Interface for the radios, contains the main functions that a radio needs, and 5 callback functions
00070  */
00071 class Radio 
00072 {
00073 protected:
00074     RadioEvents_t* RadioEvents;
00075 
00076 public:
00077     //-------------------------------------------------------------------------
00078     //                        Constructor
00079     //-------------------------------------------------------------------------
00080     /*!
00081      * @brief Constructor of the radio object, the parameters are the callback functions described in the header.
00082      *
00083      * @param [IN] events Structure containing the driver callback functions
00084      */
00085     Radio( RadioEvents_t *events );
00086     virtual ~Radio ( ) {};
00087 
00088     //-------------------------------------------------------------------------
00089     //                        Pure virtual functions
00090     //-------------------------------------------------------------------------
00091     /*!
00092      * @brief Initializes the radio
00093      *
00094      * @param [IN] events Structure containing the driver callback functions
00095      */
00096     virtual void Init( RadioEvents_t *events ) = 0;
00097     /*!
00098      * @brief Return current radio status
00099      *
00100      * @param status Radio status.[RF_IDLE, RF_RX_RUNNING, RF_TX_RUNNING]
00101      */
00102     virtual RadioState GetStatus( void ) = 0; 
00103     /*!
00104      * @brief Configures the radio with the given modem
00105      *
00106      * @param [IN] modem Modem to be used [0: FSK, 1: LoRa] 
00107      */
00108     virtual void SetModem( RadioModems_t modem ) = 0;
00109     /*!
00110      * @brief Sets the channel frequency
00111      *
00112      * @param [IN] freq         Channel RF frequency
00113      */
00114     virtual void SetChannel( uint32_t freq ) = 0;
00115     /*!
00116      * @brief Sets the channels configuration
00117      *
00118      * @param [IN] modem      Radio modem to be used [0: FSK, 1: LoRa]
00119      * @param [IN] freq       Channel RF frequency
00120      * @param [IN] rssiThresh RSSI threshold
00121      *
00122      * @retval isFree         [true: Channel is free, false: Channel is not free]
00123      */
00124     virtual bool IsChannelFree( RadioModems_t modem, uint32_t freq, int16_t rssiThresh ) = 0;
00125     /*!
00126      * @brief Generates a 32 bits random value based on the RSSI readings
00127      *
00128      * \remark This function sets the radio in LoRa modem mode and disables
00129      *         all interrupts.
00130      *         After calling this function either Radio.SetRxConfig or
00131      *         Radio.SetTxConfig functions must be called.
00132      *
00133      * @retval randomValue    32 bits random value
00134      */
00135     virtual uint32_t Random( void )= 0;
00136     /*!
00137      * @brief Sets the reception parameters
00138      *
00139      * @param [IN] modem        Radio modem to be used [0: FSK, 1: LoRa]
00140      * @param [IN] bandwidth    Sets the bandwidth
00141      *                          FSK : >= 2600 and <= 250000 Hz
00142      *                          LoRa: [0: 125 kHz, 1: 250 kHz,
00143      *                                 2: 500 kHz, 3: Reserved]
00144      * @param [IN] datarate     Sets the Datarate
00145      *                          FSK : 600..300000 bits/s
00146      *                          LoRa: [6: 64, 7: 128, 8: 256, 9: 512,
00147      *                                10: 1024, 11: 2048, 12: 4096  chips]
00148      * @param [IN] coderate     Sets the coding rate ( LoRa only )
00149      *                          FSK : N/A ( set to 0 )
00150      *                          LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
00151      * @param [IN] bandwidthAfc Sets the AFC Bandwidth ( FSK only )
00152      *                          FSK : >= 2600 and <= 250000 Hz
00153      *                          LoRa: N/A ( set to 0 )
00154      * @param [IN] preambleLen  Sets the Preamble length ( LoRa only )
00155      *                          FSK : N/A ( set to 0 )
00156      *                          LoRa: Length in symbols ( the hardware adds 4 more symbols )
00157      * @param [IN] symbTimeout  Sets the RxSingle timeout value
00158      *                          FSK : timeout number of bytes
00159      *                          LoRa: timeout in symbols
00160      * @param [IN] fixLen       Fixed length packets [0: variable, 1: fixed]
00161      * @param [IN] payloadLen   Sets payload length when fixed lenght is used
00162      * @param [IN] crcOn        Enables/Disables the CRC [0: OFF, 1: ON]
00163      * @param [IN] freqHopOn    Enables disables the intra-packet frequency hopping  [0: OFF, 1: ON] (LoRa only)
00164      * @param [IN] hopPeriod    Number of symbols bewteen each hop (LoRa only)
00165      * @param [IN] iqInverted   Inverts IQ signals ( LoRa only )
00166      *                          FSK : N/A ( set to 0 )
00167      *                          LoRa: [0: not inverted, 1: inverted]
00168      * @param [IN] rxContinuous Sets the reception in continuous mode
00169      *                          [false: single mode, true: continuous mode]
00170      */
00171     virtual void SetRxConfig ( RadioModems_t modem, uint32_t bandwidth,
00172                                uint32_t datarate, uint8_t coderate,
00173                                uint32_t bandwidthAfc, uint16_t preambleLen,
00174                                uint16_t symbTimeout, bool fixLen,
00175                                uint8_t payloadLen,
00176                                bool crcOn, bool freqHopOn, uint8_t hopPeriod,
00177                                bool iqInverted, bool rxContinuous ) = 0;
00178     /*!
00179      * @brief Sets the transmission parameters
00180      *
00181      * @param [IN] modem        Radio modem to be used [0: FSK, 1: LoRa]
00182      * @param [IN] power        Sets the output power [dBm]
00183      * @param [IN] fdev         Sets the frequency deviation ( FSK only )
00184      *                          FSK : [Hz]
00185      *                          LoRa: 0
00186      * @param [IN] bandwidth    Sets the bandwidth ( LoRa only )
00187      *                          FSK : 0
00188      *                          LoRa: [0: 125 kHz, 1: 250 kHz,
00189      *                                 2: 500 kHz, 3: Reserved]
00190      * @param [IN] datarate     Sets the Datarate
00191      *                          FSK : 600..300000 bits/s
00192      *                          LoRa: [6: 64, 7: 128, 8: 256, 9: 512,
00193      *                                10: 1024, 11: 2048, 12: 4096  chips]
00194      * @param [IN] coderate     Sets the coding rate ( LoRa only )
00195      *                          FSK : N/A ( set to 0 )
00196      *                          LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
00197      * @param [IN] preambleLen  Sets the preamble length
00198      * @param [IN] fixLen       Fixed length packets [0: variable, 1: fixed]
00199      * @param [IN] crcOn        Enables disables the CRC [0: OFF, 1: ON]
00200      * @param [IN] freqHopOn    Enables disables the intra-packet frequency hopping  [0: OFF, 1: ON] (LoRa only)
00201      * @param [IN] hopPeriod    Number of symbols bewteen each hop (LoRa only)
00202      * @param [IN] iqInverted   Inverts IQ signals ( LoRa only )
00203      *                          FSK : N/A ( set to 0 )
00204      *                          LoRa: [0: not inverted, 1: inverted]
00205      * @param [IN] timeout      Transmission timeout [us]
00206      */
00207     virtual void SetTxConfig( RadioModems_t modem, int8_t power, uint32_t fdev,
00208                               uint32_t bandwidth, uint32_t datarate,
00209                               uint8_t coderate, uint16_t preambleLen,
00210                               bool fixLen, bool crcOn, bool freqHopOn,
00211                               uint8_t hopPeriod, bool iqInverted, uint32_t timeout ) = 0;
00212     /*!
00213      * @brief Checks if the given RF frequency is supported by the hardware
00214      *
00215      * @param [IN] frequency RF frequency to be checked
00216      * @retval isSupported [true: supported, false: unsupported]
00217      */
00218     virtual bool CheckRfFrequency( uint32_t frequency ) = 0;
00219     /*!
00220      * @brief Computes the packet time on air for the given payload
00221      *
00222      * \Remark Can only be called once SetRxConfig or SetTxConfig have been called
00223      *
00224      * @param [IN] modem      Radio modem to be used [0: FSK, 1: LoRa]
00225      * @param [IN] pktLen     Packet payload length
00226      *
00227      * @retval airTime        Computed airTime for the given packet payload length
00228      */
00229     virtual uint32_t TimeOnAir ( RadioModems_t modem, uint8_t pktLen ) = 0;
00230     /*!
00231      * @brief Sends the buffer of size. Prepares the packet to be sent and sets
00232      *        the radio in transmission
00233      *
00234      * @param [IN]: buffer     Buffer pointer
00235      * @param [IN]: size       Buffer size
00236      */
00237     virtual void Send( uint8_t *buffer, uint8_t size ) = 0;
00238     /*!
00239      * @brief Sets the radio in sleep mode
00240      */
00241     virtual void Sleep( void ) = 0;
00242     /*!
00243      * @brief Sets the radio in standby mode
00244      */
00245     virtual void Standby( void ) = 0;
00246     /*!
00247      * @brief Sets the radio in CAD mode
00248      */
00249     virtual void StartCad( void ) = 0;
00250     /*!
00251      * @brief Sets the radio in reception mode for the given time
00252      * @param [IN] timeout Reception timeout [us]
00253      *                     [0: continuous, others timeout]
00254      */
00255     virtual void Rx( uint32_t timeout ) = 0;
00256     /*!
00257      * @brief Sets the radio in transmission mode for the given time
00258      * @param [IN] timeout Transmission timeout [us]
00259      *                     [0: continuous, others timeout]
00260      */
00261     virtual void Tx( uint32_t timeout ) = 0;
00262     /*!
00263      * @brief Sets the radio in continuous wave transmission mode
00264      *
00265      * @param [IN]: freq       Channel RF frequency
00266      * @param [IN]: power      Sets the output power [dBm]
00267      * @param [IN]: time       Transmission mode timeout [s]
00268      */
00269     virtual void SetTxContinuousWave( uint32_t freq, int8_t power, uint16_t time ) = 0;
00270     /*!
00271      * @brief Reads the current RSSI value
00272      *
00273      * @retval rssiValue Current RSSI value in [dBm]
00274      */
00275     virtual int16_t GetRssi ( RadioModems_t modem ) = 0;
00276     /*!
00277      * @brief Writes the radio register at the specified address
00278      *
00279      * @param [IN]: addr Register address
00280      * @param [IN]: data New register value
00281      */
00282     virtual void Write ( uint8_t addr, uint8_t data ) = 0;
00283     /*!
00284      * @brief Reads the radio register at the specified address
00285      *
00286      * @param [IN]: addr Register address
00287      * @retval data Register value
00288      */
00289     virtual uint8_t Read ( uint8_t addr ) = 0;
00290     /*!
00291      * @brief Writes multiple radio registers starting at address
00292      *
00293      * @param [IN] addr   First Radio register address
00294      * @param [IN] buffer Buffer containing the new register's values
00295      * @param [IN] size   Number of registers to be written
00296      */
00297     virtual void Write( uint8_t addr, uint8_t *buffer, uint8_t size ) = 0;
00298     /*!
00299      * @brief Reads multiple radio registers starting at address
00300      *
00301      * @param [IN] addr First Radio register address
00302      * @param [OUT] buffer Buffer where to copy the registers data
00303      * @param [IN] size Number of registers to be read
00304      */
00305     virtual void Read ( uint8_t addr, uint8_t *buffer, uint8_t size ) = 0;
00306     /*!
00307      * @brief Writes the buffer contents to the Radio FIFO
00308      *
00309      * @param [IN] buffer Buffer containing data to be put on the FIFO.
00310      * @param [IN] size Number of bytes to be written to the FIFO
00311      */
00312     virtual void WriteFifo( uint8_t *buffer, uint8_t size ) = 0;
00313     /*!
00314      * @brief Reads the contents of the Radio FIFO
00315      *
00316      * @param [OUT] buffer Buffer where to copy the FIFO read data.
00317      * @param [IN] size Number of bytes to be read from the FIFO
00318      */
00319     virtual void ReadFifo( uint8_t *buffer, uint8_t size ) = 0;
00320     /*!
00321      * @brief Sets the maximum payload length.
00322      *
00323      * @param [IN] modem      Radio modem to be used [0: FSK, 1: LoRa]
00324      * @param [IN] max        Maximum payload length in bytes
00325      */
00326     virtual void SetMaxPayloadLength( RadioModems_t modem, uint8_t max ) = 0;
00327     /*!
00328      * @brief Sets the network to public or private. Updates the sync byte.
00329      *
00330      * @remark Applies to LoRa modem only
00331      *
00332      * @param [IN] enable if true, it enables a public network
00333      */
00334     virtual void SetPublicNetwork( bool enable ) = 0;
00335 };
00336 
00337 #endif // __RADIO_H__