Egor Rumjantsev
The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F303RE/stm32f3xx_hal_tim_ex.h
- Revision:
- 93:e188a91d3eaa
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_tim_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1079 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of TIM HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_TIM_EX_H
+#define __STM32F3xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief TIM Master configuration Structure definition
+ * @note STM32F373xC and STM32F378xx: timer instances provide a single TRGO
+ * output
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ * @note STM32F373xC and STM32F378xx: single break input with configurable polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief TIM Break input(s) and Dead time configuration Structure definition
+ * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable
+ * filter and polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t BreakFilter; /*!< Specifies the brek input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Break2State; /*!< TIM Break2 State
+ This parameter can be a value of @ref TIMEx_Break2_Input_enable_disable */
+ uint32_t Break2Polarity; /*!< TIM Break2 input polarity
+ This parameter can be a value of @ref TIMEx_Break2_Polarity */
+ uint32_t Break2Filter; /*!< TIM break2 input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ * @note Advanced timers provide TRGO2 internal line which is redirected
+ * to the ADC
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection
+ This parameter can be a value of @ref TIMEx_Master_Mode_Selection_2 */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
+ * @{
+ */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Channel TIM Extended Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008)
+#define TIM_CHANNEL_4 ((uint32_t)0x000C)
+#define TIM_CHANNEL_ALL ((uint32_t)0x0018)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIM Extended Output Compare and PWM Modes
+ * @{
+ */
+
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source TIM Extended Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode TIM Extended Slave Mode
+ * @{
+ */
+
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET ((uint16_t)0x0004)
+#define TIM_SLAVEMODE_GATED ((uint16_t)0x0005)
+#define TIM_SLAVEMODE_TRIGGER ((uint16_t)0x0006)
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint16_t)0x0007)
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Event_Source TIM Extended Event Source
+ * @{
+ */
+
+#define TIM_EventSource_Update TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EventSource_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */
+#define TIM_EventSource_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */
+#define TIM_EventSource_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */
+#define TIM_EventSource_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */
+#define TIM_EventSource_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EventSource_Trigger TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EventSource_Break TIM_EGR_BG /*!< A break event is generated */
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_DMA_Base_address TIM Extended DMA BAse Address
+ * @{
+ */
+
+#define TIM_DMABase_CR1 (0x00000000)
+#define TIM_DMABase_CR2 (0x00000001)
+#define TIM_DMABase_SMCR (0x00000002)
+#define TIM_DMABase_DIER (0x00000003)
+#define TIM_DMABase_SR (0x00000004)
+#define TIM_DMABase_EGR (0x00000005)
+#define TIM_DMABase_CCMR1 (0x00000006)
+#define TIM_DMABase_CCMR2 (0x00000007)
+#define TIM_DMABase_CCER (0x00000008)
+#define TIM_DMABase_CNT (0x00000009)
+#define TIM_DMABase_PSC (0x0000000A)
+#define TIM_DMABase_ARR (0x0000000B)
+#define TIM_DMABase_RCR (0x0000000C)
+#define TIM_DMABase_CCR1 (0x0000000D)
+#define TIM_DMABase_CCR2 (0x0000000E)
+#define TIM_DMABase_CCR3 (0x0000000F)
+#define TIM_DMABase_CCR4 (0x00000010)
+#define TIM_DMABase_BDTR (0x00000011)
+#define TIM_DMABase_DCR (0x00000012)
+#define TIM_DMABase_OR (0x00000013)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_DCR) || \
+ ((BASE) == TIM_DMABase_OR))
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Channel TIM Extended Channel
+ * @{
+ */
+
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008)
+#define TIM_CHANNEL_4 ((uint32_t)0x000C)
+#define TIM_CHANNEL_5 ((uint32_t)0x0010)
+#define TIM_CHANNEL_6 ((uint32_t)0x0014)
+#define TIM_CHANNEL_ALL ((uint32_t)0x003C)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_5) || \
+ ((CHANNEL) == TIM_CHANNEL_6) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIM Extended Output Compare and PWM Modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define TIM_OCMODE_RETRIGERRABLE_OPM1 ((uint32_t)TIM_CCMR1_OC1M_3)
+#define TIM_OCMODE_RETRIGERRABLE_OPM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_COMBINED_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_COMBINED_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM1) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM2) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM1) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM2))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source TIM Extended Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_OCREFCLR ((uint32_t)0x0002)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(MODE) (((MODE) == TIM_CLEARINPUTSOURCE_ETR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_OCREFCLR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_BreakInput_Filter TIM Extended Break Input Filter
+ * @{
+ */
+
+#define IS_TIM_BREAK_FILTER(BRKFILTER) ((BRKFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break2_Input_enable_disable TIMEX Break input 2 Enable
+ * @{
+ */
+#define TIM_BREAK2_DISABLE ((uint32_t)0x00000000)
+#define TIM_BREAK2_ENABLE ((uint32_t)TIM_BDTR_BK2E)
+
+#define IS_TIM_BREAK2_STATE(STATE) (((STATE) == TIM_BREAK2_ENABLE) || \
+ ((STATE) == TIM_BREAK2_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIMEx_Break2_Polarity TIM Extended Break Input 2 Polarity
+ * @{
+ */
+#define TIM_BREAK2POLARITY_LOW ((uint32_t)0x00000000)
+#define TIM_BREAK2POLARITY_HIGH ((uint32_t)TIM_BDTR_BK2P)
+
+#define IS_TIM_BREAK2_POLARITY(POLARITY) (((POLARITY) == TIM_BREAK2POLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAK2POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Master_Mode_Selection_2 TIM Extended Master Mode Selection 2 (TRGO2)
+ * @{
+ */
+#define TIM_TRGO2_RESET ((uint32_t)0x00000000)
+#define TIM_TRGO2_ENABLE ((uint32_t)(TIM_CR2_MMS2_0))
+#define TIM_TRGO2_UPDATE ((uint32_t)(TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC1 ((uint32_t)(TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC1REF ((uint32_t)(TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC2REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC3REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC4REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF ((uint32_t)(TIM_CR2_MMS2_3))
+#define TIM_TRGO2_OC6REF ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC6REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+
+#define IS_TIM_TRGO2_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO2_RESET) || \
+ ((SOURCE) == TIM_TRGO2_ENABLE) || \
+ ((SOURCE) == TIM_TRGO2_UPDATE) || \
+ ((SOURCE) == TIM_TRGO2_OC1) || \
+ ((SOURCE) == TIM_TRGO2_OC1REF) || \
+ ((SOURCE) == TIM_TRGO2_OC2REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode TIM Extended Slave mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET ((uint32_t)(TIM_SMCR_SMS_2))
+#define TIM_SLAVEMODE_GATED ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER ((uint32_t)(TIM_SMCR_SMS_3))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1) || \
+ ((MODE) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIM Extended Event Source
+ * @{
+ */
+
+#define TIM_EventSource_Update TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EventSource_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */
+#define TIM_EventSource_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */
+#define TIM_EventSource_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */
+#define TIM_EventSource_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */
+#define TIM_EventSource_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EventSource_Trigger TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EventSource_Break TIM_EGR_BG /*!< A break event is generated */
+#define TIM_EventSource_Break2 TIM_EGR_B2G /*!< A break 2 event is generated */
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFE00) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIM Extended DMA Base Address
+ * @{
+ */
+
+#define TIM_DMABase_CR1 (0x00000000)
+#define TIM_DMABase_CR2 (0x00000001)
+#define TIM_DMABase_SMCR (0x00000002)
+#define TIM_DMABase_DIER (0x00000003)
+#define TIM_DMABase_SR (0x00000004)
+#define TIM_DMABase_EGR (0x00000005)
+#define TIM_DMABase_CCMR1 (0x00000006)
+#define TIM_DMABase_CCMR2 (0x00000007)
+#define TIM_DMABase_CCER (0x00000008)
+#define TIM_DMABase_CNT (0x00000009)
+#define TIM_DMABase_PSC (0x0000000A)
+#define TIM_DMABase_ARR (0x0000000B)
+#define TIM_DMABase_RCR (0x0000000C)
+#define TIM_DMABase_CCR1 (0x0000000D)
+#define TIM_DMABase_CCR2 (0x0000000E)
+#define TIM_DMABase_CCR3 (0x0000000F)
+#define TIM_DMABase_CCR4 (0x00000010)
+#define TIM_DMABase_BDTR (0x00000011)
+#define TIM_DMABase_DCR (0x00000012)
+#define TIM_DMABase_CCMR3 (0x00000015)
+#define TIM_DMABase_CCR5 (0x00000016)
+#define TIM_DMABase_CCR6 (0x00000017)
+#define TIM_DMABase_OR (0x00000018)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_CCMR3) || \
+ ((BASE) == TIM_DMABase_CCR5) || \
+ ((BASE) == TIM_DMABase_CCR6) || \
+ ((BASE) == TIM_DMABase_OR))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Remap TIM Extended Remapping
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP) == TIM_TIM16_GPIO) ||\
+ ((REMAP) == TIM_TIM16_RTC) ||\
+ ((REMAP) == TIM_TIM16_HSE) ||\
+ ((REMAP) == TIM_TIM16_MCO))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup TIMEx_Remap TIM Extended Remapping 1
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM8_ADC2_NONE (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC2_AWD1 (0x00000001) /* !< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ADC2_AWD2 (0x00000002) /* !< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ADC2_AWD3 (0x00000003) /* !< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP1) (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_NONE) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD1) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD2) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD3) ||\
+ ((REMAP1) == TIM_TIM16_GPIO) ||\
+ ((REMAP1) == TIM_TIM16_RTC) ||\
+ ((REMAP1) == TIM_TIM16_HSE) ||\
+ ((REMAP1) == TIM_TIM16_MCO))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap2 TIM Extended Remapping 2
+ * @{
+ */
+#define TIM_TIM1_ADC4_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC4_AWD1 (0x00000004) /* !< TIM1_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM1_ADC4_AWD2 (0x00000008) /* !< TIM1_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM1_ADC4_AWD3 (0x0000000C) /* !< TIM1_ETR is connected to ADC4 AWD3 */
+#define TIM_TIM8_ADC3_NONE (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC3_AWD1 (0x00000004) /* !< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ADC3_AWD2 (0x00000008) /* !< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ADC3_AWD3 (0x0000000C) /* !< TIM8_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM16_NONE (0x00000000) /* !< Non significant value for TIM16 */
+
+#define IS_TIM_REMAP2(REMAP2) (((REMAP2) == TIM_TIM1_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD3) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_NONE) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD1) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD2) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD3) ||\
+ ((REMAP2) == TIM_TIM16_NONE))
+/**
+ * @}
+ */
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/** @defgroup TIMEx_Remap TIM Extended Remapping 1
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM8_ADC2_NONE (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC2_AWD1 (0x00000001) /* !< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ADC2_AWD2 (0x00000002) /* !< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ADC2_AWD3 (0x00000003) /* !< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+#define TIM_TIM20_ADC3_NONE (0x00000000) /* !< TIM20_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM20_ADC3_AWD1 (0x00000001) /* !< TIM20_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM20_ADC3_AWD2 (0x00000002) /* !< TIM20_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM20_ADC3_AWD3 (0x00000003) /* !< TIM20_ETR is connected to ADC3 AWD3 */
+
+#define IS_TIM_REMAP(REMAP1) (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_NONE) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD1) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD2) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD3) ||\
+ ((REMAP1) == TIM_TIM16_GPIO) ||\
+ ((REMAP1) == TIM_TIM16_RTC) ||\
+ ((REMAP1) == TIM_TIM16_HSE) ||\
+ ((REMAP1) == TIM_TIM16_MCO) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_NONE) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD1) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD2) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD3))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap2 TIM Extended Remapping 2
+ * @{
+ */
+#define TIM_TIM1_ADC4_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC4_AWD1 (0x00000004) /* !< TIM1_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM1_ADC4_AWD2 (0x00000008) /* !< TIM1_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM1_ADC4_AWD3 (0x0000000C) /* !< TIM1_ETR is connected to ADC4 AWD3 */
+#define TIM_TIM8_ADC3_NONE (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC3_AWD1 (0x00000004) /* !< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ADC3_AWD2 (0x00000008) /* !< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ADC3_AWD3 (0x0000000C) /* !< TIM8_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM16_NONE (0x00000000) /* !< Non significant value for TIM16 */
+#define TIM_TIM20_ADC4_NONE (0x00000000) /* !< TIM20_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM20_ADC4_AWD1 (0x00000004) /* !< TIM20_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM20_ADC4_AWD2 (0x00000008) /* !< TIM20_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM20_ADC4_AWD3 (0x0000000C) /* !< TIM20_ETR is connected to ADC4 AWD3 */
+
+#define IS_TIM_REMAP2(REMAP2) (((REMAP2) == TIM_TIM1_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD3) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_NONE) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD1) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD2) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD3) ||\
+ ((REMAP2) == TIM_TIM16_NONE) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD3))
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx */
+
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Remap TIM Extended remapping
+ * @{
+ */
+
+#define TIM_TIM2_TIM8_TRGO (0x00000000) /*!< TIM8 TRGOUT is connected to TIM2_ITR1 */
+#define TIM_TIM2_ETH_PTP (0x00000400) /*!< PTP trigger output is connected to TIM2_ITR1 */
+#define TIM_TIM2_USBFS_SOF (0x00000800) /*!< OTG FS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM2_USBHS_SOF (0x00000C00) /*!< OTG HS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM14_GPIO (0x00000000) /* !< TIM14 TI1 is connected to GPIO */
+#define TIM_TIM14_RTC (0x00000001) /* !< TIM14 TI1 is connected to RTC_clock */
+#define TIM_TIM14_HSE (0x00000002) /* !< TIM14 TI1 is connected to HSE/32 */
+#define TIM_TIM14_MCO (0x00000003) /* !< TIM14 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM2_TIM8_TRGO) ||\
+ ((REMAP) == TIM_TIM2_ETH_PTP) ||\
+ ((REMAP) == TIM_TIM2_USBFS_SOF) ||\
+ ((REMAP) == TIM_TIM2_USBHS_SOF) ||\
+ ((REMAP) == TIM_TIM14_GPIO) ||\
+ ((REMAP) == TIM_TIM14_RTC) ||\
+ ((REMAP) == TIM_TIM14_HSE) ||\
+ ((REMAP) == TIM_TIM14_MCO))
+
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Group_Channel5 Group Channel 5 and Channel 1, 2 or 3
+ * @{
+ */
+#define TIM_GROUPCH5_NONE (uint32_t)0x00000000 /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC (TIM_CCR5_GC5C1) /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define TIM_GROUPCH5_OC2REFC (TIM_CCR5_GC5C2) /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define TIM_GROUPCH5_OC3REFC (TIM_CCR5_GC5C3) /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */
+
+#define IS_TIM_GROUPCH5(OCREF) ((((OCREF) & 0x1FFFFFFF) == 0x00000000))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/** @defgroup TIM_Clock_Filter TIM Clock Filter
+ * @{
+ */
+#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFF)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
+ * @{
+ */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->CCR6 |= (__COMPARE__)))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @arg TIM_CHANNEL_5: get capture/compare 5 register value
+ * @arg TIM_CHANNEL_6: get capture/compare 6 register value
+ * @retval None
+ */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\
+ ((__HANDLE__)->Instance->CCR6))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Extended Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap1, uint32_t Remap2);
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+ * @brief Extended Callbacks functions
+ * @{
+ */
+/* Extended Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+ * @brief Extended Peripheral State functions
+ * @{
+ */
+/* Extended Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/