不韋 呂
SPI 接続の温度センサ ADT7310 用のライブラリの使用例． Demo program of the library for temperature sensor ADT7310 connected using SPI interface.
Dependencies: UIT_ADT7310 UIT_AQM1602 mbed
Revision 5:8da999cd764a, committed 2017-10-28
- Comitter:
- MikamiUitOpen
- Date:
- Sat Oct 28 14:52:24 2017 +0000
- Parent:
- 4:16a9eda5ef78
- Commit message:
- 6
Changed in this revision
diff -r 16a9eda5ef78 -r 8da999cd764a UIT_ADT7310.lib --- a/UIT_ADT7310.lib Sat Jun 03 12:08:36 2017 +0000 +++ b/UIT_ADT7310.lib Sat Oct 28 14:52:24 2017 +0000 @@ -1,1 +1,1 @@ -http://developer.mbed.org/users/MikamiUitOpen/code/UIT_ADT7310/#6890e1214ea6 +http://developer.mbed.org/users/MikamiUitOpen/code/UIT_ADT7310/#38a276440674
diff -r 16a9eda5ef78 -r 8da999cd764a UIT_AQM1602.lib --- a/UIT_AQM1602.lib Sat Jun 03 12:08:36 2017 +0000 +++ b/UIT_AQM1602.lib Sat Oct 28 14:52:24 2017 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/users/MikamiUitOpen/code/UIT_AQM1602/#6e6c0f24e81f +http://mbed.org/users/MikamiUitOpen/code/UIT_AQM1602/#21830002e12d
diff -r 16a9eda5ef78 -r 8da999cd764a main.cpp
--- a/main.cpp Sat Jun 03 12:08:36 2017 +0000
+++ b/main.cpp Sat Oct 28 14:52:24 2017 +0000
@@ -1,17 +1,14 @@
//--------------------------------------------------------------
-// Dual ADT7310's using SPI interface
-// このプログラムは printf() 文でマルチバイト文字“℃”を
-// 使っているので，コンパイル時に警告が出る
+// ADT7310 using SPI interface
//
-// このプログラムは温度センサを２個使うということを前提に
-// しているプログラムなので，温度センサが１個でも動くが，
-// その場合の対応は特に行っていない
+// mbed revision: 154
//
-// 2017/06/03, Copyright (c) 2017 MIKAMI, Naoki
+// 2017/10/28, Copyright (c) 2017 MIKAMI, Naoki
//--------------------------------------------------------------
-#define ADT7310_DEBUG // デバッグの場合
-#define USING_AQM1602 // LCD 表示装置を使う場合
+#pragma diag_suppress 870 // マルチバイト文字使用の警告を抑制
+#define ADT7310_DEBUG // デバッグの場合
+#define USING_AQM1602 // LCD 表示器を使う場合
#ifdef USING_AQM1602
#include "AQM1602.hpp"
@@ -24,39 +21,31 @@
Aqm1602 lcd_; // using default port
#endif
-// Declarations of the objects for ADT7310
+// Declaration of the object for ADT7310
ADT7310 sensor1(D10); // Slave select for the sensor: D10
-ADT7310 sensor2(D9); // Slave select for the sensor: D9
int main()
{
- printf("\r\nStart dual ADT7310s\r\n");
+ printf("\r\nStart ADT7310\r\n");
#ifdef USING_AQM1602
bool on = true;
- lcd_.WriteStringXY("Dual ADT7310s", 0, 0);
+ lcd_.WriteStringXY("ADT7310", 0, 0);
#endif
-/*
- sensor1.SetResolution16(); // Set 13-bit resolution mode
- sensor2.SetResolution16(true); // Set 16-bit resolution mode
-*/
+
#ifdef ADT7310_DEBUG
// print out content of configuration registers
- uint8_t v1 = sensor1.GetConfigReg();
- uint8_t v2 = sensor2.GetConfigReg();
- printf("v1: 0x%02x, v2: 0x%02x\r\n", v1, v2);
+ uint8_t reg = sensor1.GetConfigReg();
+ printf("Config reg.: 0x%02x\r\n", reg);
#endif
while (true)
{
float tempr1 = sensor1.Read();
- float tempr2 = sensor2.Read();
- printf("Sensor1: %5.1f [℃], Sensor2: %5.1f [℃]\r\n",
- tempr1, tempr2);
+ printf("%5.1f [℃]\r\n", tempr1);
#ifdef USING_AQM1602
lcd_.ClearLine(1);
- lcd_.WriteValueXY("%5.1f, ", tempr1, 0, 1);
- lcd_.WriteValue("%5.1f \xDF\x43", tempr2);
+ lcd_.WriteValueXY("%5.1f \xDF""C", tempr1, 0, 1);
if (on) lcd_.WriteStringXY(".", 15, 0);
else lcd_.WriteStringXY(" ", 15, 0);
diff -r 16a9eda5ef78 -r 8da999cd764a mbed.bld --- a/mbed.bld Sat Jun 03 12:08:36 2017 +0000 +++ b/mbed.bld Sat Oct 28 14:52:24 2017 +0000 @@ -1,1 +1,1 @@ -https://mbed.org/users/mbed_official/code/mbed/builds/86740a56073b \ No newline at end of file +https://os.mbed.com/users/mbed_official/code/mbed/builds/fb8e0ae1cceb \ No newline at end of file