Melchior Pau

Melchior’s activity

Reply to Timer priority - D'oh, cheers :D
Melchior Pau - 14 Jun 2011
Reply to Timer priority - Ah yes, I did try that, but "Writing a logic one to the corresponding IR …
Melchior Pau - 14 Jun 2011
Reply to Timer priority - A full test code. The ticker works, since it has higher priority, the TIMER0_IRQ does …
Melchior Pau - 14 Jun 2011
New topic Timer priority - Hi, As far as I've seen, when you create a timer (or ticker or timeout) …
Melchior Pau - 14 Jun 2011
Program: USB2CAN
Melchior Pau - 31 May 2011
Reply to NXP LPC1768/MBED and CanOpen - Hey, The tweaks are minor. Increase the pc_msg a bit so it can take the …
Melchior Pau - 31 May 2011
Reply to NXP LPC1768/MBED and CanOpen - Hello, Here's the code as it is now. Import programUSB2CANMonitors the CANbus and prints read …
Melchior Pau - 31 May 2011
Reply to NXP LPC1768/MBED and CanOpen - Hey, I was trying out CANFestival a while ago but I didn't get very far. …
Melchior Pau - 31 May 2011
Reply to 5v <-> 3.3V level shifting - http://mbed.org/handbook/mbed-NXP-LPC1768 Power and Logic Levels The microcontroller I/O is all 3.3v logic, but 5v tolerant. …
Melchior Pau - 05 May 2011
Reply to Step direction acceleration for stepper motors - I ended up with something like this: Import programlazysteppercontrolSimple pulse direction program for testing stepper …
Melchior Pau - 02 May 2011

Melchior’s public repositories

  • Mbed 2 deprecated
    USB2CAN

    Monitors the CANbus and prints read messages over USB Allows you to send messages via USB to the CANbus Use a terminal application like PuTTY for windows or MoSerial for …

    canbus, monitor, USB2CAN
    Last updated: 31 May 2011 2 295
See all repositories