Martin Johnson
Very Simple Library for the STM32F3-Discovery.
Dependents: accelerometer_test neopixel_square accelerometer_test_minimal Colour_Video_Demo
Revision 4:ff94a7f6ecff, committed 2019-04-03
- Comitter:
- MartinJohnson
- Date:
- Wed Apr 03 20:59:57 2019 +0000
- Parent:
- 3:ddbddb863053
- Parent:
- 2:8bf2c6389dbc
- Commit message:
- reorganise minimal library
Changed in this revision
| src/startup_stm32f303xc.s | Show diff for this revision Revisions of this file |
| src/stm32f303xe.sct | Show diff for this revision Revisions of this file |
diff -r ddbddb863053 -r ff94a7f6ecff src/TOOLCHAIN_ARM_STD/startup_stm32f303xc.s --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/TOOLCHAIN_ARM_STD/startup_stm32f303xc.s Wed Apr 03 20:59:57 2019 +0000 @@ -0,0 +1,378 @@ +;******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** +;* File Name : startup_stm32f303xc.s +;* Author : MCD Application Team +;* Version : V1.2.2 +;* Date : 27-February-2015 +;* Description : STM32F303xC devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp equ 0x2000a000 + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 + EXPORT __heap_base + EXPORT __heap_limit + +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit EQU (__initial_sp - Stack_Size) + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1 and ADC2 + DCD USB_HP_CAN1_TX_IRQHandler ; USB Device High Priority or CAN1 TX + DCD USB_LP_CAN1_RX0_IRQHandler ; USB Device Low Priority or CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line + DCD TIM8_BRK_IRQHandler ; TIM8 Break + DCD TIM8_UP_IRQHandler ; TIM8 Update + DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD ADC3_IRQHandler ; ADC3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD ADC4_IRQHandler ; ADC4 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD COMP1_2_3_IRQHandler ; COMP1, COMP2 and COMP3 + DCD COMP4_5_6_IRQHandler ; COMP4, COMP5 and COMP6 + DCD COMP7_IRQHandler ; COMP7 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD USB_HP_IRQHandler ; USB High Priority remap + DCD USB_LP_IRQHandler ; USB Low Priority remap + DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD FPU_IRQHandler ; FPU + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_TS_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + EXPORT TIM8_BRK_IRQHandler [WEAK] + EXPORT TIM8_UP_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT ADC4_IRQHandler [WEAK] + EXPORT COMP1_2_3_IRQHandler [WEAK] + EXPORT COMP4_5_6_IRQHandler [WEAK] + EXPORT COMP7_IRQHandler [WEAK] + EXPORT USB_HP_IRQHandler [WEAK] + EXPORT USB_LP_IRQHandler [WEAK] + EXPORT USBWakeUp_RMP_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_TS_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN1_TX_IRQHandler +USB_LP_CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +USBWakeUp_IRQHandler +TIM8_BRK_IRQHandler +TIM8_UP_IRQHandler +TIM8_TRG_COM_IRQHandler +TIM8_CC_IRQHandler +ADC3_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +ADC4_IRQHandler +COMP1_2_3_IRQHandler +COMP4_5_6_IRQHandler +COMP7_IRQHandler +USB_HP_IRQHandler +USB_LP_IRQHandler +USBWakeUp_RMP_IRQHandler +FPU_IRQHandler + + B . + + ENDP + + ALIGN + + EXPORT __initial_sp + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff -r ddbddb863053 -r ff94a7f6ecff src/TOOLCHAIN_ARM_STD/stm32f303xc.sct
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/TOOLCHAIN_ARM_STD/stm32f303xc.sct Wed Apr 03 20:59:57 2019 +0000
@@ -0,0 +1,50 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F303VC: 256KB FLASH (0x80000) + 40KB SRAM (0x10000) + 8KB CCMRAM (0x2000)
+LR_IROM1 0x08000000 0x40000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x40000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; 101 vectors = 404 bytes (0x194) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x194) (0xA000-0x194) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+ ER 0x10000000 0x00002000 { ; load address = execution address
+ .ANY (ccmram)
+ .ANY (ccmram_data)
+ }
+
+}
+
diff -r ddbddb863053 -r ff94a7f6ecff src/TOOLCHAIN_GCC_ARM/STM32F303XC.ld
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/TOOLCHAIN_GCC_ARM/STM32F303XC.ld Wed Apr 03 20:59:57 2019 +0000
@@ -0,0 +1,155 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K
+ CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 8K
+ RAM (rwx) : ORIGIN = 0x20000188, LENGTH = 40k - 0x188
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
+
diff -r ddbddb863053 -r ff94a7f6ecff src/TOOLCHAIN_GCC_ARM/startup_stm32f303xc.S --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/TOOLCHAIN_GCC_ARM/startup_stm32f303xc.S Wed Apr 03 20:59:57 2019 +0000 @@ -0,0 +1,462 @@ +/** + ****************************************************************************** + * @file startup_stm32f303xc.s + * @author MCD Application Team + * @version V1.1.0 + * @date 12-Sept-2014 + * @brief STM32F303xB/STM32F303xC devices vector table for Atollic + * TrueSTUDIO toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address, + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata + +.equ BootRAM, 0xF1E0F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* Atollic update: set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + //bl __libc_init_array +/* Call the application's entry point.*/ + //bl main +/** + * Calling the crt0 'cold-start' entry point. There __libc_init_array is called + * and when existing hardware_init_hook() and software_init_hook() before + * starting main(). software_init_hook() is available and has to be called due + * to initializsation when using rtos. +*/ + bl _start + +LoopForever: + b LoopForever + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word TAMP_STAMP_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_TSC_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_2_IRQHandler + .word USB_HP_CAN_TX_IRQHandler + .word USB_LP_CAN_RX0_IRQHandler + .word CAN_RX1_IRQHandler + .word CAN_SCE_IRQHandler + .word EXTI9_5_IRQHandler + .word TIM1_BRK_TIM15_IRQHandler + .word TIM1_UP_TIM16_IRQHandler + .word TIM1_TRG_COM_TIM17_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM4_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C2_EV_IRQHandler + .word I2C2_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word USBWakeUp_IRQHandler + .word TIM8_BRK_IRQHandler + .word TIM8_UP_IRQHandler + .word TIM8_TRG_COM_IRQHandler + .word TIM8_CC_IRQHandler + .word ADC3_IRQHandler + .word 0 + .word 0 + .word 0 + .word SPI3_IRQHandler + .word UART4_IRQHandler + .word UART5_IRQHandler + .word TIM6_DAC_IRQHandler + .word TIM7_IRQHandler + .word DMA2_Channel1_IRQHandler + .word DMA2_Channel2_IRQHandler + .word DMA2_Channel3_IRQHandler + .word DMA2_Channel4_IRQHandler + .word DMA2_Channel5_IRQHandler + .word ADC4_IRQHandler + .word 0 + .word 0 + .word COMP1_2_3_IRQHandler + .word COMP4_5_6_IRQHandler + .word COMP7_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word USB_HP_IRQHandler + .word USB_LP_IRQHandler + .word USBWakeUp_RMP_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word FPU_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_TSC_IRQHandler + .thumb_set EXTI2_TSC_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_2_IRQHandler + .thumb_set ADC1_2_IRQHandler,Default_Handler + + .weak USB_HP_CAN_TX_IRQHandler + .thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler + + .weak USB_LP_CAN_RX0_IRQHandler + .thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler + + .weak CAN_RX1_IRQHandler + .thumb_set CAN_RX1_IRQHandler,Default_Handler + + .weak CAN_SCE_IRQHandler + .thumb_set CAN_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM15_IRQHandler + .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM16_IRQHandler + .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM17_IRQHandler + .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak USBWakeUp_IRQHandler + .thumb_set USBWakeUp_IRQHandler,Default_Handler + + .weak TIM8_BRK_IRQHandler + .thumb_set TIM8_BRK_IRQHandler,Default_Handler + + .weak TIM8_UP_IRQHandler + .thumb_set TIM8_UP_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_IRQHandler + .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak ADC3_IRQHandler + .thumb_set ADC3_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Channel1_IRQHandler + .thumb_set DMA2_Channel1_IRQHandler,Default_Handler + + .weak DMA2_Channel2_IRQHandler + .thumb_set DMA2_Channel2_IRQHandler,Default_Handler + + .weak DMA2_Channel3_IRQHandler + .thumb_set DMA2_Channel3_IRQHandler,Default_Handler + + .weak DMA2_Channel4_IRQHandler + .thumb_set DMA2_Channel4_IRQHandler,Default_Handler + + .weak DMA2_Channel5_IRQHandler + .thumb_set DMA2_Channel5_IRQHandler,Default_Handler + + .weak ADC4_IRQHandler + .thumb_set ADC4_IRQHandler,Default_Handler + + .weak COMP1_2_3_IRQHandler + .thumb_set COMP1_2_3_IRQHandler,Default_Handler + + .weak COMP4_5_6_IRQHandler + .thumb_set COMP4_5_6_IRQHandler,Default_Handler + + .weak COMP7_IRQHandler + .thumb_set COMP7_IRQHandler,Default_Handler + + .weak USB_HP_IRQHandler + .thumb_set USB_HP_IRQHandler,Default_Handler + + .weak USB_LP_IRQHandler + .thumb_set USB_LP_IRQHandler,Default_Handler + + .weak USBWakeUp_RMP_IRQHandler + .thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r ddbddb863053 -r ff94a7f6ecff src/startup_stm32f303xc.s --- a/src/startup_stm32f303xc.s Wed Apr 03 20:55:48 2019 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,378 +0,0 @@ -;******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** -;* File Name : startup_stm32f303xc.s -;* Author : MCD Application Team -;* Version : V1.2.2 -;* Date : 27-February-2015 -;* Description : STM32F303xC devices vector table for MDK-ARM toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the CortexM4 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;* <<< Use Configuration Wizard in Context Menu >>> -;******************************************************************************* -; -; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); -; You may not use this file except in compliance with the License. -; You may obtain a copy of the License at: -; -; http://www.st.com/software_license_agreement_liberty_v2 -; -; Unless required by applicable law or agreed to in writing, software -; distributed under the License is distributed on an "AS IS" BASIS, -; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -; See the License for the specific language governing permissions and -; limitations under the License. -; -;******************************************************************************* - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; <h> Stack Configuration -; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp equ 0x2000a000 - - -; <h> Heap Configuration -; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 - EXPORT __heap_base - EXPORT __heap_limit - -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit EQU (__initial_sp - Stack_Size) - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window WatchDog - DCD PVD_IRQHandler ; PVD through EXTI Line detection - DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line - DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line - DCD FLASH_IRQHandler ; FLASH - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line0 - DCD EXTI1_IRQHandler ; EXTI Line1 - DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch - DCD EXTI3_IRQHandler ; EXTI Line3 - DCD EXTI4_IRQHandler ; EXTI Line4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 and ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB Device High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Device Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; External Line[9:5]s - DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 - DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 - DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; External Line[15:10]s - DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line - DCD TIM8_BRK_IRQHandler ; TIM8 Break - DCD TIM8_UP_IRQHandler ; TIM8 Update - DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation - DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare - DCD ADC3_IRQHandler ; ADC3 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 - DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 - DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 - DCD ADC4_IRQHandler ; ADC4 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD COMP1_2_3_IRQHandler ; COMP1, COMP2 and COMP3 - DCD COMP4_5_6_IRQHandler ; COMP4, COMP5 and COMP6 - DCD COMP7_IRQHandler ; COMP7 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD USB_HP_IRQHandler ; USB High Priority remap - DCD USB_LP_IRQHandler ; USB Low Priority remap - DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD FPU_IRQHandler ; FPU - -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT SystemInit - IMPORT __main - - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_STAMP_IRQHandler [WEAK] - EXPORT RTC_WKUP_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_TS_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_2_IRQHandler [WEAK] - EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] - EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] - EXPORT CAN1_RX1_IRQHandler [WEAK] - EXPORT CAN1_SCE_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] - EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT TIM4_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT I2C2_EV_IRQHandler [WEAK] - EXPORT I2C2_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT USART3_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTC_Alarm_IRQHandler [WEAK] - EXPORT USBWakeUp_IRQHandler [WEAK] - EXPORT TIM8_BRK_IRQHandler [WEAK] - EXPORT TIM8_UP_IRQHandler [WEAK] - EXPORT TIM8_TRG_COM_IRQHandler [WEAK] - EXPORT TIM8_CC_IRQHandler [WEAK] - EXPORT ADC3_IRQHandler [WEAK] - EXPORT SPI3_IRQHandler [WEAK] - EXPORT UART4_IRQHandler [WEAK] - EXPORT UART5_IRQHandler [WEAK] - EXPORT TIM6_DAC_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] - EXPORT DMA2_Channel1_IRQHandler [WEAK] - EXPORT DMA2_Channel2_IRQHandler [WEAK] - EXPORT DMA2_Channel3_IRQHandler [WEAK] - EXPORT DMA2_Channel4_IRQHandler [WEAK] - EXPORT DMA2_Channel5_IRQHandler [WEAK] - EXPORT ADC4_IRQHandler [WEAK] - EXPORT COMP1_2_3_IRQHandler [WEAK] - EXPORT COMP4_5_6_IRQHandler [WEAK] - EXPORT COMP7_IRQHandler [WEAK] - EXPORT USB_HP_IRQHandler [WEAK] - EXPORT USB_LP_IRQHandler [WEAK] - EXPORT USBWakeUp_RMP_IRQHandler [WEAK] - EXPORT FPU_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_STAMP_IRQHandler -RTC_WKUP_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_TS_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_2_IRQHandler -USB_HP_CAN1_TX_IRQHandler -USB_LP_CAN1_RX0_IRQHandler -CAN1_RX1_IRQHandler -CAN1_SCE_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_TIM15_IRQHandler -TIM1_UP_TIM16_IRQHandler -TIM1_TRG_COM_TIM17_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -TIM4_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -I2C2_EV_IRQHandler -I2C2_ER_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -USART3_IRQHandler -EXTI15_10_IRQHandler -RTC_Alarm_IRQHandler -USBWakeUp_IRQHandler -TIM8_BRK_IRQHandler -TIM8_UP_IRQHandler -TIM8_TRG_COM_IRQHandler -TIM8_CC_IRQHandler -ADC3_IRQHandler -SPI3_IRQHandler -UART4_IRQHandler -UART5_IRQHandler -TIM6_DAC_IRQHandler -TIM7_IRQHandler -DMA2_Channel1_IRQHandler -DMA2_Channel2_IRQHandler -DMA2_Channel3_IRQHandler -DMA2_Channel4_IRQHandler -DMA2_Channel5_IRQHandler -ADC4_IRQHandler -COMP1_2_3_IRQHandler -COMP4_5_6_IRQHandler -COMP7_IRQHandler -USB_HP_IRQHandler -USB_LP_IRQHandler -USBWakeUp_RMP_IRQHandler -FPU_IRQHandler - - B . - - ENDP - - ALIGN - - EXPORT __initial_sp - - END - -;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff -r ddbddb863053 -r ff94a7f6ecff src/stm32f303xe.sct
--- a/src/stm32f303xe.sct Wed Apr 03 20:55:48 2019 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-; Scatter-Loading Description File
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright (c) 2014, STMicroelectronics
-; All rights reserved.
-;
-; Redistribution and use in source and binary forms, with or without
-; modification, are permitted provided that the following conditions are met:
-;
-; 1. Redistributions of source code must retain the above copyright notice,
-; this list of conditions and the following disclaimer.
-; 2. Redistributions in binary form must reproduce the above copyright notice,
-; this list of conditions and the following disclaimer in the documentation
-; and/or other materials provided with the distribution.
-; 3. Neither the name of STMicroelectronics nor the names of its contributors
-; may be used to endorse or promote products derived from this software
-; without specific prior written permission.
-;
-; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; STM32F303VC: 256KB FLASH (0x80000) + 40KB SRAM (0x10000) + 8KB CCMRAM (0x2000)
-LR_IROM1 0x08000000 0x40000 { ; load region size_region
-
- ER_IROM1 0x08000000 0x40000 { ; load address = execution address
- *.o (RESET, +First)
- *(InRoot$$Sections)
- .ANY (+RO)
- }
-
- ; 101 vectors = 404 bytes (0x194) to be reserved in RAM
- RW_IRAM1 (0x20000000+0x194) (0xA000-0x194) { ; RW data
- .ANY (+RW +ZI)
- }
-
- ER 0x10000000 0x00002000 { ; load address = execution address
- .ANY (ccmram)
- }
-
-}
-