Simple interface for Mbed Cloud Client
Embed:
(wiki syntax)
Show/hide line numbers
arm_uc_pal_realtek_rtl8195am.h
00001 // ---------------------------------------------------------------------------- 00002 // Copyright 2016-2017 ARM Ltd. 00003 // 00004 // SPDX-License-Identifier: Apache-2.0 00005 // 00006 // Licensed under the Apache License, Version 2.0 (the "License"); 00007 // you may not use this file except in compliance with the License. 00008 // You may obtain a copy of the License at 00009 // 00010 // http://www.apache.org/licenses/LICENSE-2.0 00011 // 00012 // Unless required by applicable law or agreed to in writing, software 00013 // distributed under the License is distributed on an "AS IS" BASIS, 00014 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 00015 // See the License for the specific language governing permissions and 00016 // limitations under the License. 00017 // ---------------------------------------------------------------------------- 00018 00019 #ifndef ARM_UC_PAL_RTL8195AM_IMPLEMENTATION_H 00020 #define ARM_UC_PAL_RTL8195AM_IMPLEMENTATION_H 00021 00022 #include "update-client-common/arm_uc_error.h" 00023 #include "update-client-common/arm_uc_types.h" 00024 #include "update-client-paal/arm_uc_paal_update_api.h" 00025 00026 extern ARM_UC_PAAL_UPDATE ARM_UCP_REALTEK_RTL8195AM; 00027 00028 #ifdef __cplusplus 00029 extern "C" { 00030 #endif 00031 00032 arm_uc_error_t ARM_UC_PAL_RTL8195AM_Initialize(ARM_UC_PAAL_UPDATE_SignalEvent_t callback); 00033 00034 /** 00035 * @brief Get maximum number of supported storage locations. 00036 * 00037 * @return Number of storage locations. 00038 */ 00039 uint32_t ARM_UC_PAL_RTL8195AM_GetMaxID(void); 00040 00041 /** 00042 * @brief Prepare the storage layer for a new firmware image. 00043 * @details The storage location is set up to receive an image with 00044 * the details passed in the details struct. 00045 * 00046 * @param location Storage location ID. 00047 * @param details Pointer to a struct with firmware details. 00048 * @param buffer Temporary buffer for formatting and storing metadata. 00049 * @return Returns ERR_NONE on accept, and signals the event handler with 00050 * either DONE or ERROR when complete. 00051 * Returns ERR_INVALID_PARAMETER on reject, and no signal is sent. 00052 */ 00053 arm_uc_error_t ARM_UC_PAL_RTL8195AM_Prepare(uint32_t location, 00054 const arm_uc_firmware_details_t* details, 00055 arm_uc_buffer_t* buffer); 00056 00057 /** 00058 * @brief Write a fragment to the indicated storage location. 00059 * @details The storage location must have been allocated using the Prepare 00060 * call. The call is expected to write the entire fragment before 00061 * signaling completion. 00062 * 00063 * @param location Storage location ID. 00064 * @param offset Offset in bytes to where the fragment should be written. 00065 * @param buffer Pointer to buffer struct with fragment. 00066 * @return Returns ERR_NONE on accept, and signals the event handler with 00067 * either DONE or ERROR when complete. 00068 * Returns ERR_INVALID_PARAMETER on reject, and no signal is sent. 00069 */ 00070 arm_uc_error_t ARM_UC_PAL_RTL8195AM_Write(uint32_t location, 00071 uint32_t offset, 00072 const arm_uc_buffer_t* buffer); 00073 00074 /** 00075 * @brief Close storage location for writing and flush pending data. 00076 * 00077 * @param location Storage location ID. 00078 * @return Returns ERR_NONE on accept, and signals the event handler with 00079 * either DONE or ERROR when complete. 00080 * Returns ERR_INVALID_PARAMETER on reject, and no signal is sent. 00081 */ 00082 arm_uc_error_t ARM_UC_PAL_RTL8195AM_Finalize(uint32_t location); 00083 00084 /** 00085 * @brief Read a fragment from the indicated storage location. 00086 * @details The function will read until the buffer is full or the end of 00087 * the storage location has been reached. The actual amount of 00088 * bytes read is set in the buffer struct. 00089 * 00090 * @param location Storage location ID. 00091 * @param offset Offset in bytes to read from. 00092 * @param buffer Pointer to buffer struct to store fragment. buffer->size 00093 * contains the intended read size. 00094 * @return Returns ERR_NONE on accept, and signals the event handler with 00095 * either DONE or ERROR when complete. 00096 * Returns ERR_INVALID_PARAMETER on reject, and no signal is sent. 00097 * buffer->size contains actual bytes read on return. 00098 */ 00099 arm_uc_error_t ARM_UC_PAL_RTL8195AM_Read(uint32_t location, 00100 uint32_t offset, 00101 arm_uc_buffer_t* buffer); 00102 00103 /** 00104 * @brief Set the firmware image in the slot to be the new active image. 00105 * @details This call is responsible for initiating the process for 00106 * applying a new/different image. Depending on the platform this 00107 * could be: 00108 * * An empty call, if the installer can deduce which slot to 00109 * choose from based on the firmware details. 00110 * * Setting a flag to indicate which slot to use next. 00111 * * Decompressing/decrypting/installing the firmware image on 00112 * top of another. 00113 * 00114 * @param location Storage location ID. 00115 * @return Returns ERR_NONE on accept, and signals the event handler with 00116 * either DONE or ERROR when complete. 00117 * Returns ERR_INVALID_PARAMETER on reject, and no signal is sent. 00118 */ 00119 arm_uc_error_t ARM_UC_PAL_RTL8195AM_Activate(uint32_t location); 00120 00121 /** 00122 * @brief Get firmware details for the firmware image in the slot passed. 00123 * @details This call populates the passed details struct with information 00124 * about the firmware image in the slot passed. Only the fields 00125 * marked as supported in the capabilities bitmap will have valid 00126 * values. 00127 * 00128 * @param details Pointer to firmware details struct to be populated. 00129 * @return Returns ERR_NONE on accept, and signals the event handler with 00130 * either DONE or ERROR when complete. 00131 * Returns ERR_INVALID_PARAMETER on reject, and no signal is sent. 00132 */ 00133 arm_uc_error_t ARM_UC_PAL_RTL8195AM_GetFirmwareDetails( 00134 uint32_t location, 00135 arm_uc_firmware_details_t* details); 00136 00137 /*****************************************************************************/ 00138 00139 arm_uc_error_t ARM_UC_PAL_RTL8195AM_GetActiveDetails(arm_uc_firmware_details_t* details); 00140 00141 arm_uc_error_t ARM_UC_PAL_RTL8195AM_GetInstallerDetails(arm_uc_installer_details_t* details); 00142 00143 #ifdef __cplusplus 00144 } 00145 #endif 00146 00147 #endif // ARM_UC_PAL_RTL8195AM_IMPLEMENTATION_H
Generated on Tue Jul 12 2022 19:01:33 by 1.7.2