Toyomasa Watarai
/
mbed-dev
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed-dev
by 
mbed official
targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U35_401/startup_LPC11xx.S
- Committer:
- bogdanm
- Date:
- 2015-10-01
- Revision:
- 0:9b334a45a8ff
File content as of revision 0:9b334a45a8ff:
/**************************************************
*
* Part one of the system initialization code, contains low-level
* initialization, plain thumb variant.
*
* Copyright 2012 IAR Systems. All rights reserved.
*
* $Revision: 28 $
*
**************************************************/
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
PUBLIC __vector_table_0x1c
DATA
__vector_table
DCD sfe(CSTACK) ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
__vector_table_0x1c
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD FLEX_INT0_IRQHandler ; All GPIO pin can be routed to FLEX_INTx
DCD FLEX_INT1_IRQHandler
DCD FLEX_INT2_IRQHandler
DCD FLEX_INT3_IRQHandler
DCD FLEX_INT4_IRQHandler
DCD FLEX_INT5_IRQHandler
DCD FLEX_INT6_IRQHandler
DCD FLEX_INT7_IRQHandler
DCD GINT0_IRQHandler
DCD GINT1_IRQHandler ; PIO0 (0:7)
DCD Reserved_IRQHandler ; Reserved
DCD Reserved_IRQHandler
DCD Reserved_IRQHandler
DCD Reserved_IRQHandler
DCD SSP1_IRQHandler ; SSP1
DCD I2C_IRQHandler ; I2C
DCD TIMER16_0_IRQHandler ; 16-bit Timer0
DCD TIMER16_1_IRQHandler ; 16-bit Timer1
DCD TIMER32_0_IRQHandler ; 32-bit Timer0
DCD TIMER32_1_IRQHandler ; 32-bit Timer1
DCD SSP0_IRQHandler ; SSP0
DCD UART_IRQHandler ; UART
DCD USB_IRQHandler ; USB IRQ
DCD USB_FIQHandler ; USB FIQ
DCD ADC_IRQHandler ; A/D Converter
DCD WDT_IRQHandler ; Watchdog timer
DCD BOD_IRQHandler ; Brown Out Detect
DCD FMC_IRQHandler ; IP2111 Flash Memory Controller
DCD Reserved_IRQHandler ; Reserved
DCD Reserved_IRQHandler ; Reserved
DCD USBWakeup_IRQHandler ; USB wake up
DCD Reserved_IRQHandler ; Reserved
;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
DCD 0xFFFFFFFF ; Datafill
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
PUBWEAK HardFault_Handler
PUBWEAK MemManage_Handler
PUBWEAK BusFault_Handler
PUBWEAK UsageFault_Handler
PUBWEAK SVC_Handler
PUBWEAK DebugMon_Handler
PUBWEAK PendSV_Handler
PUBWEAK SysTick_Handler
PUBWEAK FLEX_INT0_IRQHandler
PUBWEAK FLEX_INT1_IRQHandler
PUBWEAK FLEX_INT2_IRQHandler
PUBWEAK FLEX_INT3_IRQHandler
PUBWEAK FLEX_INT4_IRQHandler
PUBWEAK FLEX_INT5_IRQHandler
PUBWEAK FLEX_INT6_IRQHandler
PUBWEAK FLEX_INT7_IRQHandler
PUBWEAK GINT0_IRQHandler
PUBWEAK GINT1_IRQHandler
PUBWEAK SSP1_IRQHandler
PUBWEAK I2C_IRQHandler
PUBWEAK TIMER16_0_IRQHandler
PUBWEAK TIMER16_1_IRQHandler
PUBWEAK TIMER32_0_IRQHandler
PUBWEAK TIMER32_1_IRQHandler
PUBWEAK SSP0_IRQHandler
PUBWEAK UART_IRQHandler
PUBWEAK USB_IRQHandler
PUBWEAK USB_FIQHandler
PUBWEAK ADC_IRQHandler
PUBWEAK WDT_IRQHandler
PUBWEAK BOD_IRQHandler
PUBWEAK FMC_IRQHandler
PUBWEAK USBWakeup_IRQHandler
PUBWEAK Reserved_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
THUMB
NMI_Handler:
B .
HardFault_Handler:
B .
MemManage_Handler:
B .
BusFault_Handler:
B .
UsageFault_Handler:
B .
SVC_Handler:
B .
DebugMon_Handler:
B .
PendSV_Handler:
B .
SysTick_Handler:
B .
FLEX_INT0_IRQHandler:
B .
FLEX_INT1_IRQHandler:
B .
FLEX_INT2_IRQHandler:
B .
FLEX_INT3_IRQHandler:
B .
FLEX_INT4_IRQHandler:
B .
FLEX_INT5_IRQHandler:
B .
FLEX_INT6_IRQHandler:
B .
FLEX_INT7_IRQHandler:
B .
GINT0_IRQHandler:
B .
GINT1_IRQHandler:
B .
SSP1_IRQHandler:
B .
I2C_IRQHandler:
B .
TIMER16_0_IRQHandler:
B .
TIMER16_1_IRQHandler:
B .
TIMER32_0_IRQHandler:
B .
TIMER32_1_IRQHandler:
B .
SSP0_IRQHandler:
B .
UART_IRQHandler:
B .
USB_IRQHandler:
B .
USB_FIQHandler:
B .
ADC_IRQHandler:
B .
WDT_IRQHandler:
B .
BOD_IRQHandler:
B .
FMC_IRQHandler:
B .
USBWakeup_IRQHandler:
B .
Reserved_IRQHandler:
B .
Default_Handler:
B .
SECTION .crp:CODE:ROOT(2)
DATA
/* Code Read Protection
NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode
CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300.
- Copy RAM to flash command can not write to Sector 0.
- Erase command can erase Sector 0 only when all sectors
are selected for erase.
- Compare command is disabled.
- Read Memory command is disabled.
CRP2 0x87654321 - Read Memory is disabled.
- Write to RAM is disabled.
- "Go" command is disabled.
- Copy RAM to flash is disabled.
- Compare is disabled.
CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry
by pulling PIO0_1 LOW is disabled if a valid user code is
present in flash sector 0.
Caution: If CRP3 is selected, no future factory testing can be
performed on the device.
*/
DCD 0xFFFFFFFF
END