File content as of revision 7:f1d24c6119ac:

/*
 * The code is released under the GNU General Public License.
 * Developed by Kristian Lauszus
 * This is the algorithm for my balancing robot/segway.
 * It is controlled by a PS3 Controller via bluetooth.
 * The remote control code can be found at my other github repository: https://github.com/TKJElectronics/BalancingRobot
 * For details, see http://blog.tkjelectronics.dk/2012/02/the-balancing-robot/
 */

#include "mbed.h"
#include "BalancingRobot.h"
#include "Encoder.h"

/* Setup serial communication */
Serial xbee(p13,p14); // For wireless debugging and setting PID constants
Serial ps3(p9,p10); // For remote control
Serial debug(USBTX, USBRX); // USB

/* Setup encoders */
Encoder leftEncoder(p29,p30);
Encoder rightEncoder(p28,p27);

/* Setup timer instance */
Timer t;

int main() {
    /* Set baudrate */
    xbee.baud(115200);
    ps3.baud(115200);
    debug.baud(115200);
    
    /* Set PWM frequency */
    leftPWM.period(0.00005); // The motor driver can handle a pwm frequency up to 20kHz (1/20000=0.00005)
    rightPWM.period(0.00005);
    
    /* Calibrate the gyro and accelerometer relative to ground */
    calibrateSensors();
    
    xbee.printf("Initialized\n");
    processing(); // Send output to processing application
    
    /* Setup timing */
    t.start();
    loopStartTime = t.read_us();
    timer = loopStartTime;
    
    while (1) {
        /* Calculate pitch */
        accYangle = getAccY();
        gyroYrate = getGyroYrate();
        
        // See my guide for more info about calculation the angles and the Kalman filter: http://arduino.cc/forum/index.php/topic,58048.0.html
        pitch = kalman(accYangle, gyroYrate, t.read_us() - timer); // calculate the angle using a Kalman filter
        timer = t.read_us();
        
        //debug.printf("Pitch: %f, accYangle: %f\n",pitch,accYangle);
        
        /* Drive motors */
        if (pitch < 60 || pitch > 120) // Stop if falling or laying down
            stopAndReset();
        else
            PID(targetAngle,targetOffset);
        
        /* Update wheel velocity every 100ms */
        loopCounter++;
        if (loopCounter%10 == 0) { // If remainder is equal 0, it must be 10,20,30 etc.
            //xbee.printf("Wheel - timer: %i\n",t.read_ms());
            wheelPosition = leftEncoder.read() + rightEncoder.read();
            wheelVelocity = wheelPosition - lastWheelPosition;
            lastWheelPosition = wheelPosition;
            //xbee.printf("WheelVelocity: %i\n",wheelVelocity);
            
            if (abs(wheelVelocity) <= 20 && !stopped) { // Set new targetPosition if breaking
                targetPosition = wheelPosition;
                stopped = true;
                //xbee.printf("Stopped\n");
            }
        }
        
        /* Check for incoming serial data */
        if (ps3.readable()) // Check if there's any incoming data
            receivePS3();
        if (xbee.readable()) // For setting the PID values
            receiveXbee();
        
        /* Read battery voltage every 1s */
        if (loopCounter == 100) {
            loopCounter = 0; // Reset loop counter
            double analogVoltage = batteryVoltage.read()/1*3.3; // Convert to voltage
            analogVoltage *= 6.6; // The analog pin is connected to a 56k-10k voltage divider
            xbee.printf("analogVoltage: %f - timer: %i\n",analogVoltage,t.read_ms());
            if (analogVoltage < 9 && pitch > 60 && pitch < 120) // Set buzzer on, if voltage gets critical low
                buzzer = 1; // The mbed resets at aproximatly 8.5V           
        }
        
        /* Use a time fixed loop */
        lastLoopUsefulTime = t.read_us() - loopStartTime;
        if (lastLoopUsefulTime < STD_LOOP_TIME)
            wait_us(STD_LOOP_TIME - lastLoopUsefulTime);
        lastLoopTime = t.read_us() - loopStartTime; // only used for debugging
        loopStartTime = t.read_us();
        
        //debug.printf("%i,%i\n",lastLoopUsefulTime,lastLoopTime);
    }
}
void PID(double restAngle, double offset) {
    /* Steer robot */
    if (steerForward) {
        offset += (double)wheelVelocity/velocityScaleMove; // Scale down offset at high speed and scale up when reversing
        restAngle -= offset;
        //xbee.printf("Forward offset: %f\t WheelVelocity: %i\n",offset,wheelVelocity);
    } else if (steerBackward) {
        offset -= (double)wheelVelocity/velocityScaleMove; // Scale down offset at high speed and scale up when reversing
        restAngle += offset;
        //xbee.printf("Backward offset: %f\t WheelVelocity: %i\n",offset,wheelVelocity);
    }
    /* Break */
    else if (steerStop) {
        long positionError = wheelPosition - targetPosition;
        if (abs(positionError) > zoneA) // Inside zone A
            restAngle -= (double)positionError/positionScaleA;
        else if (abs(positionError) > zoneB) // Inside zone B
            restAngle -= (double)positionError/positionScaleB;
        else // Inside zone C
            restAngle -= (double)positionError/positionScaleC;
        
        restAngle -= (double)wheelVelocity/velocityScaleStop;
        
        if (restAngle < 80) // Limit rest Angle
            restAngle = 80;
        else if (restAngle > 100)
            restAngle = 100;
        //xbee.printf("restAngle: %f\t WheelVelocity: %i positionError: %i\n",restAngle,wheelVelocity,positionError);
    }
    /* Update PID values */
    double error = (restAngle - pitch)/100;
    double pTerm = Kp * error;
    iTerm += Ki * error;
    double dTerm = Kd * (error - lastError);
    lastError = error;
    
    double PIDValue = pTerm + iTerm + dTerm;
    
    //debug.printf("Pitch: %5.2f\tPIDValue:  %5.2f\tpTerm: %5.2f\tiTerm: %5.2f\tdTerm: %5.2f\tKp: %5.2f\tKi: %5.2f\tKd: %5.2f\n",pitch,PIDValue,pTerm,iTerm,dTerm,Kp,Ki,Kd);
    
    /* Steer robot sideways */
    double PIDLeft;
    double PIDRight;
    if (steerLeft) {
        PIDLeft = PIDValue-turnSpeed;
        PIDRight = PIDValue+turnSpeed;
    } else if (steerRotateLeft) {
        PIDLeft = PIDValue-rotateSpeed;
        PIDRight = PIDValue+rotateSpeed;
    } else if (steerRight) {
        PIDLeft = PIDValue+turnSpeed;
        PIDRight = PIDValue-turnSpeed;
    } else if (steerRotateRight) {
        PIDLeft = PIDValue+rotateSpeed;
        PIDRight = PIDValue-rotateSpeed;
    } else {
        PIDLeft = PIDValue;
        PIDRight = PIDValue;
    }
    PIDLeft *= 0.95; // compensate for difference in the motors
    
    /* Set PWM Values */
    if (PIDLeft >= 0)
        move(left, forward, PIDLeft);
    else
        move(left, backward, PIDLeft * -1);
    if (PIDRight >= 0)
        move(right, forward, PIDRight);
    else
        move(right, backward, PIDRight * -1);
}
void receivePS3() {
    char input[16]; // The serial buffer is only 16 characters
    int i = 0;
    while (1) {
        input[i] = ps3.getc();
        if (input[i] == ';' || i == 15) // keep reading until it reads a semicolon or it exceeds the serial buffer
            break;
        i++;
    }
    //debug.printf("Input: %s\n",input);
    
    // Set all false
    steerForward = false;
    steerBackward = false;
    steerStop = false;
    steerLeft = false;
    steerRotateLeft = false;
    steerRight = false;
    steerRotateRight = false;
    
    /* For remote control */
    if (input[0] == 'F') { // Forward
        strtok(input, ","); // Ignore 'F'
        targetOffset = atof(strtok(NULL, ";")); // read until the end and then convert from string to double
        //xbee.printf("%f\n",targetOffset); // Print targetOffset for debugging
        steerForward = true;
    } else if (input[0] == 'B') { // Backward
        strtok(input, ","); // Ignore 'B'
        targetOffset = atof(strtok(NULL, ";")); // read until the end and then convert from string to double
        //xbee.printf("%f\n",targetOffset); // Print targetOffset for debugging
        steerBackward = true;
    } else if (input[0] == 'L') { // Left
        if (input[1] == 'R') // Left Rotate
            steerRotateLeft = true;
        else
            steerLeft = true;
    } else if (input[0] == 'R') { // Right
        if (input[1] == 'R') // Right Rotate
            steerRotateRight = true;
        else
            steerRight = true;
    } else if (input[0] == 'S') { // Stop
        steerStop = true;
        stopped = false;
        targetPosition = wheelPosition;
    }
    
    else if (input[0] == 'T') { // Set the target angle
        strtok(input, ","); // Ignore 'T'
        targetAngle = atof(strtok(NULL, ";")); // read until the end and then convert from string to double
        xbee.printf("%f\n",targetAngle); // Print targetAngle for debugging
    } else if (input[0] == 'A') { // Abort
        stopAndReset();
        while (ps3.getc() != 'C'); // Wait until continue is send
    }
}
void receiveXbee() {
    char input[16]; // The serial buffer is only 16 characters
    int i = 0;
    while (1) {
        input[i] = xbee.getc();
        if (input[i] == ';' || i == 15) // keep reading until it reads a semicolon or it exceeds the serial buffer
            break;
        i++;
    }
    //debug.printf("Input: %s\n",input);
    
    if (input[0] == 'T') { // Set the target angle
        strtok(input, ","); // Ignore 'T'
        targetAngle = atof(strtok(NULL, ";")); // read until the end and then convert from string to double
    } else if (input[0] == 'P') {
        strtok(input, ",");//Ignore 'P'
        Kp = atof(strtok(NULL, ";")); // read until the end and then convert from string to double
    } else if (input[0] == 'I') {
        strtok(input, ",");//Ignore 'I'
        Ki = atof(strtok(NULL, ";")); // read until the end and then convert from string to double
    } else if (input[0] == 'D') {
        strtok(input, ",");//Ignore 'D'
        Kd = atof(strtok(NULL, ";")); // read until the end and then convert from string to double
    } else if (input[0] == 'A') { // Abort
        stopAndReset();
        while (xbee.getc() != 'C'); // Wait until continue is send
    } else if (input[0] == 'G') // The processing application sends this at startup
        processing(); // Send output to processing application
}
void processing() {
    /* Send output to processing application */
    xbee.printf("Processing,%5.2f,%5.2f,%5.2f,%5.2f\n",Kp,Ki,Kd,targetAngle);
}
void stopAndReset() {
    stop(both);
    lastError = 0;
    iTerm = 0;
    targetPosition = wheelPosition;
    buzzer = 0;
}
double kalman(double newAngle, double newRate, double dtime) {
    // KasBot V2  -  Kalman filter module - http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1284738418 - http://www.x-firm.com/?page_id=145
    // with slightly modifications by Kristian Lauszus
    // See http://academic.csuohio.edu/simond/courses/eec644/kalman.pdf and http://www.cs.unc.edu/~welch/media/pdf/kalman_intro.pdf for more information
    dt = dtime / 1000000; // Convert from microseconds to seconds
    
    // Discrete Kalman filter time update equations - Time Update ("Predict")
    // Update xhat - Project the state ahead
    angle += dt * (newRate - bias);
    
    // Update estimation error covariance - Project the error covariance ahead
    P_00 += -dt * (P_10 + P_01) + Q_angle * dt;
    P_01 += -dt * P_11;
    P_10 += -dt * P_11;
    P_11 += +Q_gyro * dt;
    
    // Discrete Kalman filter measurement update equations - Measurement Update ("Correct")
    // Calculate Kalman gain - Compute the Kalman gain
    S = P_00 + R_angle;
    K_0 = P_00 / S;
    K_1 = P_10 / S;
    
    // Calculate angle and resting rate - Update estimate with measurement zk
    y = newAngle - angle;
    angle += K_0 * y;
    bias += K_1 * y;
    
    // Calculate estimation error covariance - Update the error covariance
    P_00 -= K_0 * P_00;
    P_01 -= K_0 * P_01;
    P_10 -= K_1 * P_00;
    P_11 -= K_1 * P_01;
    
    return angle;
}
double getGyroYrate() {
    // (gyroAdc-gyroZero)/Sensitivity (In quids) - Sensitivity = 0.00333/3.3=0.001009091
    double gyroRate = -((gyroY.read() - zeroValues[0]) / 0.001009091);
    return gyroRate;
}
double getAccY() {
    // (accAdc-accZero)/Sensitivity (In quids) - Sensitivity = 0.33/3.3=0.1
    double accXval = (accX.read() - zeroValues[1]) / 0.1;
    double accYval = (accY.read() - zeroValues[2]) / 0.1;
    accYval--;//-1g when lying down
    double accZval = (accZ.read() - zeroValues[3]) / 0.1;
    
    double R = sqrt(pow(accXval, 2) + pow(accYval, 2) + pow(accZval, 2)); // Calculate the length of force vector
    double angleY = acos(accYval / R) * RAD_TO_DEG;
    
    return angleY;
}
void calibrateSensors() {
    LEDs = 0xF; // Turn all onboard LEDs on
    
    double adc[4] = {0,0,0,0};
    for (uint8_t i = 0; i < 100; i++) { // Take the average of 100 readings
        adc[0] += gyroY.read();
        adc[1] += accX.read();
        adc[2] += accY.read();
        adc[3] += accZ.read();
        wait_ms(10);
    }
    zeroValues[0] = adc[0] / 100; // Gyro X-axis
    zeroValues[1] = adc[1] / 100; // Accelerometer X-axis
    zeroValues[2] = adc[2] / 100; // Accelerometer Y-axis
    zeroValues[3] = adc[3] / 100; // Accelerometer Z-axis
    
    LEDs = 0x0; // Turn all onboard LEDs off
}
void move(Motor motor, Direction direction, float speed) { // speed is a value in percentage (0.0f to 1.0f)
    if (motor == left) {
        leftPWM = speed;
        if (direction == forward) {
            leftA = 0;
            leftB = 1;
        } else if (direction == backward) {
            leftA = 1;
            leftB = 0;
        }
    } else if (motor == right) {
        rightPWM = speed;
        if (direction == forward) {
            rightA = 0;
            rightB = 1;
        } else if (direction == backward) {
            rightA = 1;
            rightB = 0;
        }
    } else if (motor == both) {
        leftPWM = speed;
        rightPWM = speed;
        if (direction == forward) {
            leftA = 0;
            leftB = 1;
            
            rightA = 0;
            rightB = 1;
        } else if (direction == backward) {
            leftA = 1;
            leftB = 0;
            
            rightA = 1;
            rightB = 0;
        }
    }
}
void stop(Motor motor) {
    if (motor == left) {
        leftPWM = 1;
        leftA = 1;
        leftB = 1;
    } else if (motor == right) {
        rightPWM = 1;
        rightA = 1;
        rightB = 1;
    } else if (motor == both) {
        leftPWM = 1;
        leftA = 1;
        leftB = 1;
        
        rightPWM = 1;
        rightA = 1;
        rightB = 1;
    }
}