Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of LGstaandart by
InputOutput.c
- Committer:
- igor_v
- Date:
- 2016-01-30
- Revision:
- 1:f2adcae3d304
- Parent:
- 0:8ad47e2b6f00
- Child:
- 2:2d0b80ed9216
File content as of revision 1:f2adcae3d304:
#include "Global.h" //INPUT Input; //OUTPUT Output; volatile uint32_t I2CMasterState = I2C_IDLE; volatile uint32_t I2CMasterBuffer[I2C_WRITELENGTH]; int ExchangeErr = 0; //----------------------temp--------------------- extern char test; /****************************************************************************** ** Function name: G_Photo_Exchange ** ** Descriptions: Driver for I2C exchange ** ** parameters: None ** Returned value: None ** ******************************************************************************/ void G_Photo_Exchange(void) { uint32_t StatValue; static uint32_t WrIndex; static int32_t time_out = TIMEOUT; if (I2CMasterState) return; //e.transmitting is not active, go away if (--time_out < 0) //e. valid time period elapsed, go away { time_out = TIMEOUT; I2CMasterState = I2C_IDLE; //e. timer elapsed, go away LPC_I2C0->CONSET = I2CONSET_STO; //e. Set Stop flag LPC_I2C0->CONCLR = I2CONCLR_AAC | I2CONCLR_SIC | I2CONCLR_STAC; return; } else if (!(LPC_I2C0->CONSET & I2CONSET_SI)) //e. state of I2C bus has not been changed return; StatValue = LPC_I2C0->STAT; switch ( StatValue ) { case 0x08: // A Start condition is issued (write data for the first potentiometer) WrIndex = 0; time_out = TIMEOUT; //e. enable countdown LPC_I2C0->DAT = I2CMasterBuffer[WrIndex++]; //e. send address LPC_I2C0->CONCLR = (I2CONCLR_SIC | I2CONCLR_STAC); //e .clear interrupt bit and start bit break; case 0x10: // A repeated started is issued (write data for the second potentiometer) LPC_I2C0->DAT = I2CMasterBuffer[WrIndex++]; //e. send address LPC_I2C0->CONCLR = (I2CONCLR_SIC | I2CONCLR_STAC); //e .clear interrupt bit and start bit break; case 0x18: //e. Regardless, it's a ACK after slave address reading LPC_I2C0->DAT = I2CMasterBuffer[WrIndex++]; //e. send another byte LPC_I2C0->CONCLR = I2CONCLR_SIC; //e. clear interrupt bit break; case 0x28: //e. Regardless it's a ACK after data byte if (WrIndex == I2C_WRITELENGTH) //e. we have transmitted the data for the B potentiometer { I2CMasterState = I2C_IDLE; LPC_I2C0->CONSET = I2CONSET_STO; //e. Set Stop flag Output.Str.Cnt_Dif = 300; } else if (WrIndex == 3) { LPC_I2C0->CONSET = I2CONSET_STA; Output.Str.Cnt_Dif = 200; } else { LPC_I2C0->DAT = I2CMasterBuffer[WrIndex++]; //e. send another byte Output.Str.Cnt_Dif = 100; } LPC_I2C0->CONCLR = I2CONCLR_SIC; //e. clear interrupt bit break; case 0x20: //e. no aknowledgement after address transmitting case 0x30: //e. no aknowledgement after data block transmitting LPC_I2C0->CONSET = I2CONSET_STO; //e. Set Stop flag LPC_I2C0->CONCLR = (I2CONCLR_SIC | I2CONCLR_STAC); I2CMasterState = I2C_IDLE; //e. fix new state break; } return; } /****************************************************************************** ** Function name: DAC_ADC_Exchange ** ** Descriptions: Loading data to DACs and initialization of ADC reading ** ** parameters: None ** Returned value: None ** ******************************************************************************/ void DAC_ADC_Exchange() { //-------------------------loading data from ADC to buffer--------------------------------------- //int x; ExchangeErr &= ~ADC_ERR_MSK; //e. �������� ���� ������ if (LPC_SSP0->SR & SSP_BUSY) //e. ���� ����� ����������� �� ����� { ExchangeErr |= ADC_ERR_MSK; //e. ���������� ���� ������ } else { LPC_SSP0->DR = 0x8001; //�������� 0x8001 � ������� ��������. if (Sys_Clock & 1)//���� �������� ���� �� { LPC_SSP0->DR = WRITE_DAC0; //e.������� ��� ���_0 ����������. LPC_SSP0->DR = (-Output.ArrayOut[3]+32767); //e. �������� 12 ��� } else //���� ���� ������. { LPC_SSP0->DR = WRITE_DAC1 ; //e.������� ��� ���_1 ����������. LPC_SSP0->DR = (Output.ArrayOut[0]<<1) & 0xFFF0; //e. �������� 12 ��� } } } /****************************************************************************** ** Function name: ADC_Input ** ** Descriptions: Reading data from ADC ** ** parameters: None ** Returned value: None ** ******************************************************************************/ void ADC_Input() { uint32_t Dummy; //---------------------read data from ADC buffer--------------------------------------------- Dummy = Dummy; ExchangeErr &= ~ADC_ERR_MSK; if (LPC_SSP0->SR & SSP_BUSY) //���� ����� ���� �� ������(�������� ������) { ExchangeErr |= ADC_ERR_MSK; //���������� ���� ������ if (!(LPC_SSP0->SR & TX_SSP_EMPT)) //����� �������� �� ����. ExchangeErr |= ADC_ERR_MSK; //���������� ���� ������ } else //����� �������� ��������� �����. { Input.ArrayIn[0] = LPC_SSP0->DR; //������Thermo2 Input.ArrayIn[1] = LPC_SSP0->DR; //������ Thermo1 Input.ArrayIn[2] = LPC_SSP0->DR; //������ HF_out while (LPC_SSP0->SR & RX_SSP_notEMPT) //���� ����� SPI �� ����. Dummy = LPC_SSP0->DR; //�������� �����. } } /***************************************************************************** ** Function name: DAC_Output ** ** Descriptions: Output data to intrnal DAC ** ** parameters: output - code for output ** Returned value: None ** *****************************************************************************/ void DAC_Output(int output) { LPC_DAC->CR = (output<<6); return; } /****************************************************************************** ** Function name: G_Photo_Init ** ** Descriptions: Initialization of exchange with digital potentiometers ** ** parameters: None ** Returned value: None ** ******************************************************************************/ void G_Photo_Init(void ) { LPC_SC->PCONP |= (1 << 19);//��������� ���������� I2C. /* set PIO0.27 and PIO0.28 to I2C0 SDA and SCK */ /* function to 01 on both SDA and SCK. */ LPC_PINCON->PINSEL1 &= ~0x03C00000; //P0.27 - SDA. LPC_PINCON->PINSEL1 |= 0x01400000; //P0.28 - SCK. // ������������� ���� ���� ���������� /*����� ������ ����� ���������� I2C ������ ���������� I2C */ LPC_I2C0->CONCLR = I2CONCLR_AAC | I2CONCLR_SIC | I2CONCLR_STAC | I2CONCLR_I2ENC; // ��������� ���������������� � ����� ������� /*--- Reset registers ---*/ LPC_I2C0->SCLL = I2SCLL_SCLL; // - ������� scl low time period LPC_I2C0->SCLH = I2SCLH_SCLH; // - ������� scl high time period I2CMasterBuffer[0] = A_ADDRESS; //���� ������������� ������ � I2CMasterBuffer[1] = WRITE_CMD; //������ I2CMasterBuffer[3] = B_ADDRESS; //���� ������������� ������ � I2CMasterBuffer[4] = WRITE_CMD; //������ LPC_I2C0->CONSET = I2CONSET_I2EN; //��������� ���������� I2C. } /****************************************************************************** ** Function name: DAC_ADC_Exchange_Init ** ** Descriptions: Initialization of data exchange with DACs and ADCs ** ** parameters: None ** Returned value: None ** ******************************************************************************/ void DAC_ADC_Exchange_Init() { int Dummy; // ������������� ������� ��� ������� ������ ������. Dummy = Dummy; /* Enable AHB clock to the SSP0, SSP1 */ LPC_SC->PCONP |= (0x1<<21); // ��������� SSP0. // LPC_SC->PCONP |= (0x1<<10); /* ����� ������� ��� ��������� ���������� �� ��������� � ��������� �������� �� 4 */ LPC_SC->PCLKSEL1 &= ~(0x3<<10); //00 CLK/4; 1 CLK; 2 CLK/2; 3 CLK/8 LPC_SC->PCLKSEL1 |= (0x0<<10); //00 CLK/4; 1 CLK; 2 CLK/2; 3 CLK/8 // LPC_SC->PCLKSEL0 &= ~(0x3<<20); // P0.15~0.18 as SSP0 LPC_PINCON->PINSEL0 &= ~(0x3UL<<30); //��������� � 0.15 LPC_PINCON->PINSEL0 |= (0x2UL<<30); //��� (???? SCK 0 ???). ������� ��� �������������� Master - slave LPC_PINCON->PINSEL1 &= ~((0x3<<0)|(0x3<<2)|(0x3<<4)); // ����������� � 0.17 � � 0.18 LPC_PINCON->PINSEL1 |= ((0x2<<2)|(0x2<<4)); // ��� MISO0 � MOSI0 LPC_PINCON->PINMODE0 &= ~(0x3UL<<30);// ? ������������ �� � 0.15 ������ On-Chip pull-down resistor enabled LPC_PINCON->PINMODE0 |= (0x3UL<<30);// ? ������������ �� � 0.15 ������ On-Chip pull-down resistor enabled LPC_PINCON->PINMODE1 &= ~((0x3<<2)|(0x3<<4));// ? ������������ �� � 0.17 � � 0.18 ������ On-Chip pull-down resistor enabled LPC_PINCON->PINMODE1 |= ((0x3<<2)|(0x3<<4));// ? ������������ �� � 0.17 � � 0.18 ������ On-Chip pull-down resistor enabled /* P0.6~0.9 as SSP1 */ /* LPC_PINCON->PINSEL0 &= ~((0x3<<12)|(0x3<<14)|(0x3<<16)|(0x3<<18)); LPC_PINCON->PINSEL0 |= ((0x2<<12)|(0x2<<14)|(0x2<<16)|(0x2<<18)); LPC_PINCON->PINMODE0 &= ~((0x3<<16)|(0x3<<12)|(0x3<<14)|(0x3<<18)); LPC_PINCON->PINMODE0 |= ((0x3<<16)|(0x3<<14)|(0x3<<18)); */ /* Set DSS data to 16-bit, Frame format TI, SCR is 2 */ LPC_SSP0->CR0 = ((3<<8)|(0<<7)|(0<<4) |0xF); // (0xF)-������������ DSS(Data sise select) � 16-������ ������, (3<<8 scr - ����� �������), // ������ ������� ����� ������������ ����� �������, ������������ �������� � ������� ���������� ��������� ������� // ������ ����� TI. // LPC_SSP1->CR0 = 0x0207; /* SSPCPSR clock prescale register, master mode, minimum divisor is 0x02 */ LPC_SSP0->CPSR = 0x2; // freq = CLK/(cpsdvr*(scr+1)) = 1.6 MHz // LPC_SSP1->CPSR = 0x2; /*SSP enable, master mode */ LPC_SSP0->CR1 = SSPCR1_SSE; // LPC_SSP1->CR1 = SSPCR1_SSE; while (LPC_SSP0->SR & SSP_BUSY); // while (LPC_SSP1->SR & SSP_BUSY); while (LPC_SSP0->SR & RX_SSP_notEMPT) /* clear the RxFIFO */ Dummy = LPC_SSP0->DR; //all pins after reset is in GPIO mode, so CS pins needn't to configure LPC_GPIO0->FIODIR |= ADC; // P0.16 defined as CS for ADC LPC_GPIO0->FIOSET |= ADC; // set CS for ADC LPC_GPIO0->FIODIR |= DAC; // P defined as CS for DAC LPC_GPIO0->FIOCLR |= DAC; // set CS for DAC /* while (LPC_SSP1->SR & RX_SSP_notEMPT) Dummy = LPC_SSP1->DR;*/ /* clear the RxFIFO */ } /***************************************************************************** ** Function name: DACInit ** ** Descriptions: initialize DAC channel ** ** parameters: None ** Returned value: None ** *****************************************************************************/ void DACInit( void ) { /* setup the related pin to DAC output */ LPC_PINCON->PINSEL1 |= 0x00200000; /* ���������� p0.26 ��� ����� ��� */ // LPC_GPIO0->FIODIR |= (1<<26); LPC_DAC->CNTVAL = 0; // ������� ��������� LPC_DAC->CTRL = 0; // ��� ��� return; } /****************************************************************************** ** Function name: Out_G_photo ** ** Descriptions: Start of potentiometer data writing process ** ** parameters: pointer to gain factors ** Returned value: None ** ******************************************************************************/ void Out_G_photo(uint32_t Ph_A, uint32_t Ph_B) { I2CMasterBuffer[2] = Ph_A;// ������ � ����� I2C ������� ������ � � ������ ���� �������.(��������) I2CMasterBuffer[5] = Ph_B;// ������ � ����� I2C ������� ������ � � ������ ���� �������.(��������) LPC_I2C0->CONSET = I2CONSET_STA; // ���������� ����� ����. I2CMasterState = I2C_BUSY; // ���������� ���� ������� ����. }