Diff: config.h

Revision:

0:8ad47e2b6f00

Child:

21:bc8c1cec3da6

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/config.h	Sat Jan 30 13:00:39 2016 +0000
@@ -0,0 +1,99 @@
+#ifndef CONFIG
+#define CONFIG
+
+
+#define		DEBUG
+
+//========== device selection ==========================
+#define 	GLD_DEVICE
+//#define 	OID_DEVICE
+//#define 	OID_RF_DEVICE
+//======================================================
+#define COMMAND_DEBUG
+
+#if defined(GLD_DEVICE)
+	#define		FIRMWARE_VER		0xD	// 9.13 - firmware version
+	#define     NEW_THERMO_ADC	
+	#define		CONFIG_HFO_REG
+//	#define		DELTA_SF_DELAY
+	#define		CONFIG_PLC_SINUS
+//	#define		CONFIG_HW_PLC
+	//#define		CONFIG_SIMUL_HW_PLC	// simulation of part of PLC regulator in FPGA
+	#define		CONFIG_PLC_LIDEM 		// PLC reg. works with demodulated LI signal (demodulation in analog IC)
+//	#define		CONFIG_PLC_LIM			// PLC reg. works with modulated LI signal (demodulation inside FPGA)
+	#define		WP_TRANSITION_ENA 		//e. allow the linear transition process for PLC reset //r. ðàçðåøåí ëèíåéíûé ïåðåõîäíîé ïðîöåññ ïðè îáíóëåíèè ÑÐÏ
+	
+	#define		CONFIG_HFO_MOV_AVER_FILTER
+	
+	#define		CONFIG_SIX_THERMO_SENSORS
+	
+	#define		DEBUG_EXT_LAT_CNTR
+	
+	//#warning "=== GLD_DEVICE configuration selected ==="
+	
+#elif defined(OID_DEVICE)
+	#define		FIRMWARE_VER		0x1C	// 1.12 - firmware version
+	
+	#define		CONFIG_CURRENT_REG
+//	#define		CONFIG_IA_STABILIZING
+	#define		CONFIG_LI_STABILIZING
+//	#define		CONFIG_IB_EQUAL_IA
+	#define		CONFIG_IB_IA_BALANCE
+	
+	#define		CONFIG_HW_PLC
+//	#define		CONFIG_PLC_LIDEM 		// PLC reg. works with demodulated LI signal (demodulation in analog IC)
+	#define		CONFIG_PLC_LIM			// PLC reg. works with modulated LI signal (demodulation inside FPGA)
+	//#define		CONFIG_SIMUL_HW_PLC	// simulation of part of PLC regulator in FPGA
+	#define		WP_TRANSITION_ENA 		//e. allow the linear transition process for PLC reset //r. ðàçðåøåí ëèíåéíûé ïåðåõîäíîé ïðîöåññ ïðè îáíóëåíèè ÑÐÏ
+	
+	//#warning "=== OID_DEVICE configuration selected ==="
+	
+#elif defined(OID_RF_DEVICE)
+	#define		FIRMWARE_VER		0x1C	// 1.12 - firmware version
+	
+	#define		CONFIG_HFO_REG
+	
+	#define		CONFIG_HW_PLC
+//	#define		CONFIG_PLC_LIDEM 		// PLC reg. works with demodulated LI signal (demodulation in analog IC)
+	#define		CONFIG_PLC_LIM			// PLC reg. works with modulated LI signal (demodulation inside FPGA)
+	
+	//#warning "=== OID_RF_DEVICE configuration selected ==="
+	
+#else
+	#error "Not defined Device type"
+#endif
+
+// -------- conditional compiles errors messages ---------------------------
+#if !(defined(GLD_DEVICE) ^ defined(OID_DEVICE) ^ defined(OID_RF_DEVICE))
+	#error "Should be defined only one device, not several"
+#endif
+
+#if defined(CONFIG_PLC_LIDEM) & defined(CONFIG_PLC_LIM)
+	#error "Should be defined CONFIG_PLC_LIDEM or CONFIG_PLC_LIM, not both"
+#endif
+
+#if !( defined(CONFIG_PLC_LIDEM) | defined(CONFIG_PLC_LIM) )
+	#error "Not defined PLC mode: modulated / demodulated"
+#endif
+
+#if defined(OID_DEVICE)
+#if defined(CONFIG_IA_STABILIZING) & defined(CONFIG_LI_STABILIZING)
+	#error "Should be defined CONFIG_IA_STABILIZING or CONFIG_LI_STABILIZING, not both"
+#endif
+
+#if !( defined(CONFIG_IA_STABILIZING) | defined(CONFIG_LI_STABILIZING) )
+	#error "Not defined IA regulator mode: select CONFIG_IA_STABILIZING or CONFIG_LI_STABILIZING"
+#endif
+
+#if defined(CONFIG_IB_EQUAL_IA) & defined(CONFIG_IB_IA_BALANCE)
+	#error "Should be defined CONFIG_IB_EQUAL_IA or CONFIG_IB_IA_BALANCE, not both"
+#endif
+
+#if !( defined(CONFIG_IB_EQUAL_IA) | defined(CONFIG_IB_IA_BALANCE) )
+	#error "Not defined IB regulator mode: select CONFIG_IB_EQUAL_IA or CONFIG_IB_IA_BALANCE"
+#endif
+#endif // OID_DEVICE
+
+#endif
+
+