Revision 5:ba0af4c6f21e, committed 2013-11-07

Comitter:

Kojto

Date:

Thu Nov 07 18:46:18 2013 +0000

Parent:

4:9d543391017c

Child:

6:7b36903dbe99

Commit message:

- update to the host driver rev 45; - using the new EthernetInterface

Changed in this revision

--- a/NVIC_set_all_priorities.lib	Tue Oct 08 15:15:27 2013 +0000
+++ b/NVIC_set_all_priorities.lib	Thu Nov 07 18:46:18 2013 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/frankvnk/code/NVIC_set_all_priorities/#676bbfffe9f6
+http://mbed.org/users/frankvnk/code/NVIC_set_all_priorities/#01504ecd2025

--- a/cc3000_hostdriver_mbedsocket.lib	Tue Oct 08 15:15:27 2013 +0000
+++ b/cc3000_hostdriver_mbedsocket.lib	Thu Nov 07 18:46:18 2013 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/Kojto/code/cc3000_hostdriver_mbedsocket/#9dd909fb7caf
+http://mbed.org/users/Kojto/code/cc3000_hostdriver_mbedsocket/#50ab13d8f2dc

--- a/init.cpp	Tue Oct 08 15:15:27 2013 +0000
+++ b/init.cpp	Thu Nov 07 18:46:18 2013 +0000
@@ -33,7 +33,7 @@
     PWR_EN1 = 0;
     PWR_EN2 = 1;
 
-    NVIC_set_all_irq_priorities(3);
+    NVIC_set_all_irq_priorities(0x3);
     NVIC_SetPriority(SPI0_IRQn, 0x0);     // Wi-Fi SPI interrupt must be higher priority than SysTick
     NVIC_SetPriority(PORTA_IRQn, 0x1);
     NVIC_SetPriority(SysTick_IRQn, 0x2);  // SysTick set to lower priority than Wi-Fi SPI bus interrupt

--- a/main.cpp	Tue Oct 08 15:15:27 2013 +0000
+++ b/main.cpp	Thu Nov 07 18:46:18 2013 +0000
@@ -22,89 +22,20 @@
 
 using namespace mbed_cc3000;
 
-tUserFS user_info;
-
 /* cc3000 module declaration specific for user's board. Check also init() */
 #if (MY_BOARD == WIGO)
-cc3000 wifi(PTA16, PTA13, PTD0, SPI(PTD2, PTD3, PTC5), PORTA_IRQn);
+cc3000 wifi(PTA16, PTA13, PTD0, SPI(PTD2, PTD3, PTC5), "ssid", "key", WPA2, false);
 Serial pc(USBTX, USBRX);
 #elif (MY_BOARD == WIFI_DIPCORTEX)
-cc3000 wifi(p28, p27, p30, SPI(p21, p14, p37), PIN_INT0_IRQn);
+cc3000 wifi(p28, p27, p30, SPI(p21, p14, p37), "ssid", "key", WPA2, false);
 Serial pc(UART_TX, UART_RX);
+#elif (MY_BOARD == MBED_BOARD_EXAMPLE)
+cc3000 wifi(p9, p10, p8, SPI(p5, p6, p7), "ssid", "key", WPA2, false);
+Serial pc(USBTX, USBRX);
 #else
 
 #endif
 
-#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
-  const uint8_t smartconfigkey[] = {0x73,0x6d,0x61,0x72,0x74,0x63,0x6f,0x6e,0x66,0x69,0x67,0x41,0x45,0x53,0x31,0x36};
-#else
-  const uint8_t smartconfigkey = 0;
-#endif
-
-/**
- *  \brief Print cc3000 information
- *  \param none
- *  \return none
- */
-void print_cc3000_info() {
-    uint8_t myMAC[8];
-
-    printf("MAC address + cc3000 info \r\n");
-    wifi.get_user_file_info((uint8_t *)&user_info, sizeof(user_info));
-    wifi.get_mac_address(myMAC);
-    printf(" MAC address %02x:%02x:%02x:%02x:%02x:%02x \r\n \r\n", myMAC[0], myMAC[1], myMAC[2], myMAC[3], myMAC[4], myMAC[5]);
-
-    printf(" FTC        %i \r\n",user_info.FTC);
-    printf(" PP_version %i.%i \r\n",user_info.PP_version[0], user_info.PP_version[1]);
-    printf(" SERV_PACK  %i.%i \r\n",user_info.SERV_PACK[0], user_info.SERV_PACK[1]);
-    printf(" DRV_VER    %i.%i.%i \r\n",user_info.DRV_VER[0], user_info.DRV_VER[1], user_info.DRV_VER[2]);
-    printf(" FW_VER     %i.%i.%i \r\n",user_info.FW_VER[0], user_info.FW_VER[1], user_info.FW_VER[2]);
-}
-
-/**
- *  \brief Connect to SSID with a timeout
- *  \param ssid     Name of SSID
- *  \param key      Password
- *  \param sec_mode Security mode
- *  \return none
- */
-void connect_to_ssid(char *ssid, char *key, unsigned char sec_mode) {
-    printf("Connecting to SSID: %s. Timeout is 10s. \r\n",ssid);
-    if (wifi.connect_to_AP((uint8_t *)ssid, (uint8_t *)key, sec_mode) == true) {
-        printf(" Connected. \r\n");
-    } else {
-        printf(" Connection timed-out (error). Please restart. \r\n");
-        while(1);
-  }
-}
-
-/**
- *  \brief Connect to SSID without security
- *  \param ssid Name of SSID
- *  \return none
- */
-void connect_to_ssid(char *ssid) {
-    wifi.connect_open((uint8_t *)ssid);
-}
-
-/**
- *  \brief First time configuration
- *  \param none
- *  \return none
- */
-void do_FTC(void) {
-    printf("Running First Time Configuration \r\n");
-    wifi.start_smart_config(smartconfigkey);
-    while (wifi.is_dhcp_configured() == false) {
-         wait_ms(500);
-         printf("Waiting for dhcp to be set. \r\n");
-    }
-    user_info.FTC = 1;
-    wifi.set_user_file_info((uint8_t *)&user_info, sizeof(user_info));
-    wifi._wlan.stop();
-    printf("FTC finished. \r\n");
-}
-
 /**
  *  \brief TCP server demo
  *  \param  none
@@ -114,42 +45,14 @@
     init(); /* board dependent init */
     pc.baud(115200);
 
-    wifi.start(0);
-    printf("CC3000 tcp server demo.\r\n");
-    print_cc3000_info();
-
-    printf("Attempting SSID Connection. \r\n");
-#if (USE_SMART_CONFIG == 1)
-    if (user_info.FTC == 1) {
-        wifi._wlan.ioctl_set_connection_policy(0, 1, 1);
+    printf("cc3000 tcp server demo. \r\n");
+    wifi.init();
+    if (wifi.connect() == -1) {
+        printf("Failed to connect. Please verify connection details and try again. \r\n");
     } else {
-        printf("Smart config is not set, starting configuration. \r\n");
-        do_FTC();
-        printf("Smart config is set. Please restart your board. \r\n");
-        while(1);
+        printf("IP address: %s \r\n", wifi.getIPAddress());
     }
-#else
-    wifi._wlan.ioctl_set_connection_policy(0, 0, 0);
-#ifndef CC3000_TINY_DRIVER
-#ifdef AP_KEY
-    connect_to_ssid(SSID, AP_KEY, AP_SECURITY);
-#else
-    connect_to_ssid(SSID);
-#endif
-#else
-    connect_to_ssid(SSID);
-#endif
-#endif
-    printf("DHCP request \r\n");
-    while (wifi.is_dhcp_configured() == false) {
-         wait_ms(500);
-         printf("  Waiting for dhcp to be set. \r\n");
-    }
-
-    tNetappIpconfigRetArgs ipinfo2;
-    wifi.get_ip_config(&ipinfo2); // data is returned in the ipinfo2 structure
-    printf("DHCP assigned IP Address = %d.%d.%d.%d \r\n", ipinfo2.aucIP[3], ipinfo2.aucIP[2], ipinfo2.aucIP[1], ipinfo2.aucIP[0]);
-
+    
     const int ECHO_SERVER_PORT = 1895;
 
     TCPSocketServer server;

--- a/main.h	Tue Oct 08 15:15:27 2013 +0000
+++ b/main.h	Thu Nov 07 18:46:18 2013 +0000
@@ -16,26 +16,13 @@
 #ifndef MAIN_H
 #define MAIN_H
 
-#define WIGO           1
-#define WIFI_DIPCORTEX 2
-#define UNDEFINED      3
+#define WIGO               1
+#define WIFI_DIPCORTEX     2
+#define MBED_BOARD_EXAMPLE 3
+#define UNDEFINED          4
 
 #define MY_BOARD WIGO
 
-// use this defines in AP_SECURITY
-#define NONE 0
-#define WEP  1
-#define WPA  2
-#define WPA2 3
-
-// use smart config
-#define USE_SMART_CONFIG 0
-
- // Default SSID Settings
-#define AP_KEY       "test"
-#define AP_SECURITY  WPA2            // WPA2 must be enabled for use with iPhone or Android phone hotspot!
-#define SSID         "test"
-
 void init();
 
 #endif