Revision 72:474978cebb9b, committed 2018-09-10

Comitter:

Jun__Jun

Date:

Mon Sep 10 08:02:04 2018 +0000

Parent:

71:53949e6131f6

Commit message:

1st Release

Changed in this revision

diff -r 53949e6131f6 -r 474978cebb9b targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303xE/TARGET_NUCLEO_F303RE/USBHAL_STM32F303RE.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303xE/TARGET_NUCLEO_F303RE/USBHAL_STM32F303RE.h	Mon Sep 10 08:02:04 2018 +0000
@@ -0,0 +1,127 @@
+/* Copyright (c) 2016 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+#ifndef USBHAL_STM32F303ZE_H
+#define USBHAL_STM32F303ZE_H
+#define USBHAL_IRQn  USB_LP_CAN_RX0_IRQn
+/*  must be multiple of 4 bytes */
+#define NB_ENDPOINT 8
+#define MAXTRANSFER_SIZE  0x200
+#define FIFO_USB_RAM_SIZE (MAXTRANSFER_SIZE+MAX_PACKET_SIZE_EP0+MAX_PACKET_SIZE_EP1+MAX_PACKET_SIZE_EP2+MAX_PACKET_SIZE_EP3)
+#if (FIFO_USB_RAM_SIZE > 0x500)
+#error "FIFO dimensioning incorrect"
+#endif
+
+typedef struct
+{
+	USBHAL *inst;
+	void (USBHAL::*bus_reset)(void);
+	void (USBHAL::*sof)(int frame);
+	void (USBHAL::*connect_change)(unsigned int  connected);
+	void (USBHAL::*suspend_change)(unsigned int suspended);
+	void (USBHAL::*ep0_setup)(void);
+	void (USBHAL::*ep0_in)(void);
+	void (USBHAL::*ep0_out)(void);
+	void (USBHAL::*ep0_read)(void);
+	bool (USBHAL::*ep_realise)(uint8_t endpoint, uint32_t maxPacket, uint32_t flags);
+	bool (USBHAL::*epCallback[6])(void);
+	uint8_t epComplete[2*NB_ENDPOINT];
+	/*  memorize dummy buffer used for reception */
+	uint32_t pBufRx[MAXTRANSFER_SIZE>>2];
+	uint32_t pBufRx0[MAX_PACKET_SIZE_EP0>>2];
+    gpio_t usb_switch;
+}USBHAL_Private_t;
+
+uint32_t HAL_PCDEx_GetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo)
+{
+        return 1024;
+}
+
+void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state){
+    USBHAL_Private_t *priv=((USBHAL_Private_t *)(hpcd->pData));
+    gpio_write(&(priv->usb_switch),state);
+}
+
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) {
+    USBHAL_Private_t *priv=((USBHAL_Private_t *)(hpcd->pData));
+    USBHAL *obj= priv->inst;
+    uint32_t sofnum = (hpcd->Instance->FNR) & USB_FNR_FN;
+    void (USBHAL::*func)(int frame) = priv->sof;
+    (obj->*func)(sofnum);
+}
+
+USBHAL * USBHAL::instance;
+
+USBHAL::USBHAL(void) {
+    /*  init parameter  */
+    USBHAL_Private_t *HALPriv = new(USBHAL_Private_t);
+    hpcd.Instance = USB;
+    /*  initialized Init to zero (constructor does not zero initialized the
+     *  area */
+    /*  initialized all field of init including 0 field  */
+    /*  constructor does not fill with zero */
+    memset(&hpcd.Init, 0, sizeof(hpcd.Init));
+    hpcd.Init.dev_endpoints = NB_ENDPOINT;
+    hpcd.Init.ep0_mps =   MAX_PACKET_SIZE_EP0;
+    hpcd.Init.phy_itface = PCD_PHY_EMBEDDED;
+    hpcd.Init.Sof_enable = 1;
+    hpcd.Init.speed = PCD_SPEED_FULL;
+    /*  pass instance for usage inside call back */
+    HALPriv->inst = this;
+    HALPriv->bus_reset = &USBHAL::busReset;
+    HALPriv->suspend_change = &USBHAL::suspendStateChanged;
+    HALPriv->connect_change = &USBHAL::connectStateChanged;
+    HALPriv->sof = &USBHAL::SOF;
+    HALPriv->ep0_setup = &USBHAL::EP0setupCallback;
+    HALPriv->ep_realise = &USBHAL::realiseEndpoint;
+    HALPriv->ep0_in = &USBHAL::EP0in;
+    HALPriv->ep0_out = &USBHAL::EP0out;
+    HALPriv->ep0_read = &USBHAL::EP0read;
+    hpcd.pData = (void*)HALPriv;
+    HALPriv->epCallback[0] = &USBHAL::EP1_OUT_callback;
+    HALPriv->epCallback[1] = &USBHAL::EP1_IN_callback;
+    HALPriv->epCallback[2] = &USBHAL::EP2_OUT_callback;
+    HALPriv->epCallback[3] = &USBHAL::EP2_IN_callback;
+    HALPriv->epCallback[4] = &USBHAL::EP3_OUT_callback;
+    HALPriv->epCallback[5] = &USBHAL::EP3_IN_callback;
+    instance = this;
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /* Configure USB DM pin. This is optional, and maintained only for user guidance. */
+    pin_function(PA_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_USB));
+    pin_function(PA_12, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_USB));
+    __HAL_RCC_GPIOG_CLK_ENABLE();
+    gpio_init_out(&HALPriv->usb_switch,PB_9);
+    /* Enable USB Clock */
+    __HAL_RCC_USB_CLK_ENABLE();
+    /* Enable SYSCFG Clock */
+    __HAL_RCC_SYSCFG_CLK_ENABLE();
+    hpcd.State = HAL_PCD_STATE_RESET;
+    HAL_PCD_Init(&hpcd);
+    /* hardcoded size of FIFO according definition*/
+    HAL_PCDEx_PMAConfig(&hpcd , 0x00 , PCD_SNG_BUF, 0x30);
+    HAL_PCDEx_PMAConfig(&hpcd , 0x80 , PCD_SNG_BUF, 0x70);
+#if 1
+    HAL_PCDEx_PMAConfig(&hpcd , 0x3, PCD_DBL_BUF, 0x018000b0);
+#else
+    HAL_PCDEx_PMAConfig(&hpcd , 0x3, PCD_SNG_BUF, 0x180);
+#endif
+    HAL_PCDEx_PMAConfig(&hpcd , 0x83, PCD_SNG_BUF, 0xb0);
+    NVIC_SetVector(USBHAL_IRQn,(uint32_t)&_usbisr);
+    NVIC_SetPriority(USBHAL_IRQn, 1);
+    HAL_PCD_Start(&hpcd);
+}
+#endif

diff -r 53949e6131f6 -r 474978cebb9b targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303xE/TARGET_NUCLEO_F303RE/USBHAL_STM_TARGET.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303xE/TARGET_NUCLEO_F303RE/USBHAL_STM_TARGET.h	Mon Sep 10 08:02:04 2018 +0000
@@ -0,0 +1,18 @@
+/* Copyright (c) 2016 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+#include "USBHAL_STM32F303RE.h"