Diff: targets/hal/TARGET_ONSEMI/TARGET_NCS36510/uart.h

Revision:

144:ef7eb2e8f9f7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_ONSEMI/TARGET_NCS36510/uart.h	Fri Sep 02 15:07:44 2016 +0100
@@ -0,0 +1,61 @@
+/**
+ ******************************************************************************
+ * @file uart.h
+ * @brief Defines common properties of any UART driver.
+ * @internal
+ * @author ON Semiconductor
+ * $Rev: 2074 $
+ * $Date: 2013-07-10 18:06:15 +0530 (Wed, 10 Jul 2013) $
+ ******************************************************************************
+ * @copyright (c) 2012 ON Semiconductor. All rights reserved.
+ * ON Semiconductor is supplying this software for use with ON Semiconductor
+ * processor based microcontrollers only.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+ * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ * @endinternal
+ *
+ * @details
+ * A UART driver must comply to the generic driver template (see driver.h), and
+ * more specifically to the character driver template (see char_driver.h). All
+ * UART drivers share some properties; defining these is the purpose of this file.
+ *
+ * The options passed when opening a UART device should at least include the
+ * flow control type and the baud rate. These are included in the uart_options_t
+ * data type. The type can be extended by a UART driver implementation.
+ *
+ * The UART driver implementation must make its driver publicly available with
+ * an external global variable.
+ *
+ * @ingroup uart
+ */
+
+#ifndef UART_H_
+#define UART_H_
+
+//#include "char_driver.h"
+
+/** Type listing the supported kinds of flow control. */
+typedef enum {
+    /** No flow control */
+    none,
+    /** use hardware CTS (External CPU indicates it is ok for the modem to transmit)
+     * and RTS (modem requests to sent to external CPU) flow control.
+     */
+    rtscts,
+    /** use hardware CTS/RTS flow control, but CTS is no response to RTS,
+     * RTS and CTS are used to indicate intent to transmit.
+     */
+    rtscts_e
+} flow_control_t;
+
+/** A set of options to be passed when creating a uart device instance. */
+typedef struct uart_options {
+    uint32_t baudrate; /**< The expected baud rate. */
+    flow_control_t control;/**< Defines type of flow control, none or rtscts */
+} uart_options_t, *uart_options_pt;
+
+#endif /* UART_H_ */