Johannes Stratmann
added prescaler for 16 bit pwm in LPC1347 target
Fork of
mbed-dev
by 
mbed official
Diff: targets/hal/TARGET_ONSEMI/TARGET_NCS36510/pad_map.h
- Revision:
- 144:ef7eb2e8f9f7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_ONSEMI/TARGET_NCS36510/pad_map.h Fri Sep 02 15:07:44 2016 +0100
@@ -0,0 +1,235 @@
+/**
+******************************************************************************
+* @file pad_map.h
+* @brief PAD hw module register map
+* @internal
+* @author ON Semiconductor
+* $Rev: 3166 $
+* $Date: 2015-01-19 11:28:08 +0530 (Mon, 19 Jan 2015) $
+******************************************************************************
+* @copyright (c) 2012 ON Semiconductor. All rights reserved.
+* ON Semiconductor is supplying this software for use with ON Semiconductor
+* processor based microcontrollers only.
+*
+* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+* ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+* INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+* @endinternal
+*
+* @ingroup pad
+*
+* @details
+*/
+
+#ifndef PAD_MAP_H_
+#define PAD_MAP_H_
+
+/*************************************************************************************************
+* *
+* Header files *
+* *
+*************************************************************************************************/
+
+#include "architecture.h"
+
+/*************************************************************************************************
+* *
+* Symbolic Constants *
+* *
+*************************************************************************************************/
+
+/** no pull up nor pull down */
+#define PAD_PULL_NONE (uint8_t)0x01
+/** pull down */
+#define PAD_PULL_DOWN (uint8_t)0x00
+/** pull up */
+#define PAD_PULL_UP (uint8_t)0x03
+
+/** Drive strength */
+#define PAD_DRIVE_L0 (uint8_t)0x00
+#define PAD_DRIVE_L1 (uint8_t)0x01
+#define PAD_DRIVE_L2 (uint8_t)0x02
+#define PAD_DRIVE_L3 (uint8_t)0x03
+#define PAD_DRIVE_L4 (uint8_t)0x04
+#define PAD_DRIVE_L5 (uint8_t)0x05
+#define PAD_DRIVE_L6 (uint8_t)0x06
+
+/** output configuration push/pull */
+#define PAD_OUTCFG_PUSHPULL (uint8_t)0x00
+/** output configuration open drain */
+#define PAD_OOUTCFG_OPENDRAIN (uint8_t)0x01
+
+/** lowest power PAD configuration, shall be the default */
+#define PAD_LOW_POWER (PAD_PULL_NONE | (PAD_DRIVE_L0<<2) | (PAD_OOUTCFG_OPENDRAIN<<5))
+
+/** custom Power PAD configuration */
+#ifdef REVD
+#define PAD_OUTPUT_PN_L1_OD (PAD_PULL_NONE | (PAD_DRIVE_L1<<2) | (PAD_OOUTCFG_OPENDRAIN<<5))
+#define PAD_INPUT_PD_L1_PP (PAD_PULL_DOWN | (PAD_DRIVE_L1<<2) | (PAD_OUTCFG_PUSHPULL<<5))
+#define PAD_UNUSED_PD_L0_PP (PAD_PULL_DOWN | (PAD_DRIVE_L0<<2) | (PAD_OUTCFG_PUSHPULL<<5))
+
+#define PAD_UART_TX (PAD_PULL_UP | (PAD_DRIVE_L1<<2) | (PAD_OUTCFG_PUSHPULL<<5))
+#define PAD_UART_RX (PAD_PULL_UP | (PAD_DRIVE_L1<<2) | (PAD_OOUTCFG_OPENDRAIN<<5))
+#endif /* REVD */
+
+/**************************************************************************************************
+* *
+* Type definitions *
+* *
+**************************************************************************************************/
+
+/** Pad control
+ * The pad control peripheral is used to setup any necessary pad parameters
+ * not controlled directly via the cross-bar: output drive strength,
+ * push/pull control and output drive type.
+ */
+typedef struct {
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO0;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO1;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO2;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO3;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO4;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO5;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO6;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO7;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO8;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO9;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO10;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO11;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO12;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO13;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO14;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO15;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO16;
+ union {
+ struct {
+ __IO uint32_t PULL :2; /**< 00 Pull-down active, 01 No pull active, 10 No pull active, 11 Pull-up active*/
+ __IO uint32_t POWER :3; /**< Output Drive Strength*/
+ __IO uint32_t TYPE :1; /**< Output Type: 0 Push/Pull, 1 Open Drain*/
+ } BITS;
+ __IO uint32_t WORD;
+ } PADIO17;
+} PadReg_t, *PadReg_pt;
+
+#endif /* PAD_MAP_H_ */