Diff: cc3000.cpp

Revision:

23:fed7f64dd520

Parent:

16:f3676ae62f96

Child:

26:456f73ed2a75

--- a/cc3000.cpp	Thu Oct 03 20:22:45 2013 +0000
+++ b/cc3000.cpp	Thu Oct 03 21:00:00 2013 +0000
@@ -1,447 +1,447 @@
-/*****************************************************************************
-*
-*  C++ interface/implementation created by Martin Kojtal (0xc0170). Thanks to
-*  Jim Carver and Frank Vannieuwkerke for their inital cc3000 mbed port and
-*  provided help.
-*
-*  This version of "host driver" uses CC3000 Host Driver Implementation. Thus
-*  read the following copyright:
-*
-*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
-*
-*  Redistribution and use in source and binary forms, with or without
-*  modification, are permitted provided that the following conditions
-*  are met:
-*
-*    Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*
-*    Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in the
-*    documentation and/or other materials provided with the
-*    distribution.
-*
-*    Neither the name of Texas Instruments Incorporated nor the names of
-*    its contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*
-*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-*****************************************************************************/
-#include "cc3000.h"
-#include "cc3000_event.h"
-
-namespace mbed_cc3000 {
-
-/* TODO this prefix remove? verify */
-static uint8_t cc3000_prefix[] = {'T', 'T', 'T'};
-cc3000 *cc3000::_inst;
-
-cc3000::cc3000(PinName cc3000_irq, PinName cc3000_en, PinName cc3000_cs, SPI cc3000_spi, IRQn_Type irq_port)
-            :  _event(_simple_link, _hci, _spi, *this), _socket(_simple_link, _hci, _event), _spi(cc3000_irq, cc3000_en, cc3000_cs, cc3000_spi, irq_port, _event, _simple_link), _hci(_spi),
-            _nvmem(_hci, _event, _simple_link), _netapp(_simple_link, _nvmem, _hci, _event), _wlan(_simple_link, _event, _spi, _hci) {
-    /* TODO - pIRQ riorities ?? */
-
-    _simple_link.set_tx_complete_signal(1);
-    _status.dhcp = 0;
-    _status.connected = 0;
-    _status.socket = 0;
-    _status.dhcp_configured = 0;
-    _status.smart_config_complete = 0;
-    _status.stop_smart_config = 0;
-    _status.ok_to_shut_down = 0;
-
-    _inst = this;
-}
-
-cc3000::~cc3000() {
-
-}
-
-void cc3000::usync_callback(int32_t event_type, uint8_t * data, uint8_t length) {
-    if (event_type == HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE)
-    {
-        _status.smart_config_complete = 1;
-        _status.stop_smart_config = 1;
-    }
-
-    if (event_type == HCI_EVNT_WLAN_UNSOL_CONNECT)
-    {
-        _status.connected = 1;
-    }
-
-    if (event_type == HCI_EVNT_WLAN_UNSOL_DISCONNECT)
-    {
-        _status.connected = 0;
-        _status.dhcp      = 0;
-        _status.dhcp_configured = 0;
-    }
-
-    if (event_type == HCI_EVNT_WLAN_UNSOL_DHCP)
-    {
-      if ( *(data + NETAPP_IPCONFIG_MAC_OFFSET) == 0) {
-          _status.dhcp = 1;
-      } else {
-          _status.dhcp = 0;
-      }
-    }
-
-    if (event_type == HCI_EVENT_CC3000_CAN_SHUT_DOWN)
-    {
-        _status.ok_to_shut_down = 1;
-    }
-
-    if (event_type == HCI_EVNT_WLAN_ASYNC_PING_REPORT)
-    {
-        memcpy(&_ping_report, data, length);
-    }
-
-    if (event_type == HCI_EVNT_BSD_TCP_CLOSE_WAIT) {
-        uint8_t socketnum;
-        socketnum = data[0];
-        if (socketnum < MAX_SOCKETS) {
-            _closed_sockets[socketnum] = true; /* clients socket is closed */
-        }
-    }
-}
-
-void cc3000::start_smart_config(const uint8_t *smart_config_key) {
-    // Reset all the previous configuration
-    _wlan.ioctl_set_connection_policy(0, 0, 0);
-    _wlan.ioctl_del_profile(255);
-
-    //Wait until CC3000 is disconected
-    while (_status.connected == 1)
-    {
-        wait_us(5);
-        _event.hci_unsolicited_event_handler();
-    }
-
-    // Trigger the Smart Config process
-
-    _wlan.smart_config_set_prefix(cc3000_prefix);
-    // Start the Smart Config process with AES disabled
-    _wlan.smart_config_start(0);
-
-    DBG_CC("Waiting for smartconfig to be completed");
-
-    // Wait for Smart config finished
-    while (_status.smart_config_complete == 0)
-    {
-        wait_ms(100);
-
-    }
-    
-    DBG_CC("Smartconfig finished");
-    
-#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
-    // create new entry for AES encryption key
-    _nvmem.create_entry(NVMEM_AES128_KEY_FILEID, 16);
-    // write AES key to NVMEM
-    _security.aes_write_key((uint8_t *)(&smart_config_key[0]));
-    // Decrypt configuration information and add profile
-    _wlan.smart_config_process();
-#endif
-
-    // Configure to connect automatically to the AP retrieved in the
-    // Smart config process
-    _wlan.ioctl_set_connection_policy(0, 1, 1);
-
-    // reset the CC3000
-    _wlan.stop();
-    wait(2);
-    _wlan.start(0);
-    wait(2);
-
-    // Mask out all non-required events
-    _wlan.set_event_mask(HCI_EVNT_WLAN_KEEPALIVE|HCI_EVNT_WLAN_UNSOL_INIT|HCI_EVNT_WLAN_ASYNC_PING_REPORT);
-}
-
-bool cc3000::connect_secure(const uint8_t *ssid, const uint8_t *key, int32_t security_mode) {
-    uint32_t ret;
-
-    _wlan.disconnect();
-    wait_ms(3);
-    ret = _wlan.connect(security_mode, ssid, strlen((const char *)ssid), 0, (uint8_t *)key, strlen((const char *)key));
-    if (ret == 0) { /* TODO static internal cc3000 state 0 to TRUE */
-      ret = true;
-    } else {
-      ret = false;
-    }
-    return ret;
-}
-
-bool cc3000::connect_to_AP(const uint8_t *ssid, const uint8_t *key, int32_t security_mode) {
-    Timer t;  /* TODO static? */
-    bool ret = true;
-
-    t.start();
-    while (is_connected() == false) {
-        if (key == 0) {
-            if (connect_open(ssid)) {
-                break;
-            }
-        } else {
-#ifndef CC3000_TINY_DRIVER
-            if (connect_secure(ssid,key,security_mode)) {
-                break;
-            }
-#else
-            return false; /* secure connection not supported with TINY_DRIVER */
-#endif
-        }
-
-        /* timeout 10 seconds */
-        if (t.read_ms() > 10000){
-            ret = false;
-            
-            DBG_CC("Connection to AP failed");
-            
-            break;
-        }
-    }
-
-    return ret;
-}
-
-void cc3000::start(uint8_t patch) {
-    _wlan.start(patch);
-    _wlan.set_event_mask(HCI_EVNT_WLAN_UNSOL_INIT | HCI_EVNT_WLAN_KEEPALIVE);
-}
-
-void cc3000::stop(void) {
-    _wlan.stop();
-}
-
-void cc3000::restart(uint8_t patch) {
-    _wlan.stop();
-    wait_ms(500);
-    _wlan.start(patch);
-}
-
-bool cc3000::connect_open(const uint8_t *ssid) {
-    uint32_t ret;
-
-    _wlan.disconnect();
-    wait_ms(3);
-#ifndef CC3000_TINY_DRIVER
-    ret = _wlan.connect(0,ssid, strlen((const char *)ssid), 0, 0, 0);
-#else
-    ret = _wlan.connect(ssid, strlen((const char *)ssid));
-#endif
-    if (ret == 0) {
-        ret = true;
-    } else {
-        ret = false;
-    }
-    return ret;
-}
-
-bool cc3000::is_connected() {
-    return _status.connected;
-}
-
-bool cc3000::is_dhcp_configured() {
-    return _status.dhcp;
-}
-
-bool cc3000::is_smart_confing_completed() {
-    return _status.smart_config_complete;
-}
-
-void cc3000::get_mac_address(uint8_t address[6]) {
-    _nvmem.get_mac_address(address);
-}
-
-void cc3000::set_mac_address(uint8_t address[6]) {
-    _nvmem.set_mac_address(address);
-}
-
-void cc3000::get_user_file_info(uint8_t *info_file, size_t size) {
-    _nvmem.read( NVMEM_USER_FILE_1_FILEID, size, 0, info_file);
-}
-
-#ifndef CC3000_TINY_DRIVER
-bool cc3000::get_ip_config(tNetappIpconfigRetArgs *ip_config) {
-    if ((_status.dhcp == false) || (_status.connected == false)) {
-        return false;
-    }
-
-    _netapp.ipconfig(ip_config);
-    return true;
-}
-#endif
-
-cc3000_client cc3000::create_tcp_client(uint32_t ip_address, uint16_t port) {
-    sockaddr socket_address = {0};
-    int32_t tcp_socket;
-
-    tcp_socket = _socket.socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
-    if (tcp_socket == -1) {
-        DBG_CC("Failed to create new socket (tcp)");
-        return cc3000_client(*this);
-    }
-
-    socket_address.family = AF_INET;
-    socket_address.data[0] = (port & 0xFF00) >> 8;
-    socket_address.data[1] = (port & 0x00FF);
-    socket_address.data[2] = ip_address >> 24;
-    socket_address.data[3] = ip_address >> 16;
-    socket_address.data[4] = ip_address >> 8;
-    socket_address.data[5] = ip_address;
-
-    if (_socket.connect(tcp_socket, &socket_address, sizeof(socket_address)) == -1) {
-        DBG_CC("Failed to connect (tcp)");
-        _socket.closesocket(tcp_socket);
-        return cc3000_client(*this);
-    }
-
-    return cc3000_client(*this, tcp_socket);
-}
-cc3000_client cc3000::create_udp_client(uint32_t ip_address, uint16_t port) {
-    sockaddr socket_address = {0};
-    int32_t udp_socket;
-
-    udp_socket = _socket.socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
-    if (udp_socket == -1) {
-        DBG_CC("Failed to create new socket (udp)");
-        return cc3000_client(*this);
-    }
-
-    socket_address.family = AF_INET;
-    socket_address.data[0] = (port & 0xFF00) >> 8;
-    socket_address.data[1] = (port & 0x00FF);
-    socket_address.data[2] = ip_address >> 24;
-    socket_address.data[3] = ip_address >> 16;
-    socket_address.data[4] = ip_address >> 8;
-    socket_address.data[5] = ip_address;
-
-    if (_socket.connect(udp_socket, &socket_address, sizeof(socket_address)) == -1) {
-        DBG_CC("Failed to connect (udp)");
-        _socket.closesocket(udp_socket);
-        return cc3000_client(*this);
-    }
-
-    return cc3000_client(*this, udp_socket);
-}
-
-cc3000_server cc3000::create_tcp_server(uint32_t ip_address, uint16_t port) {
-    sockaddr socket_address = {0};
-    int32_t tcp_socket;
-
-    tcp_socket = _socket.socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
-    if (tcp_socket == -1) {
-        DBG_CC("Failed to create new socket.");
-        return cc3000_server(*this, socket_address);
-    }
-
-    socket_address.family = AF_INET;
-    socket_address.data[0] = (port & 0xFF00) >> 8;
-    socket_address.data[1] = (port & 0x00FF);
-    socket_address.data[2] = ip_address >> 24;
-    socket_address.data[3] = ip_address >> 16;
-    socket_address.data[4] = ip_address >> 8;
-    socket_address.data[5] = ip_address;
-
-    if (_socket.bind(tcp_socket, &socket_address, sizeof(socket_address)) != 0) {
-        DBG_CC("Failed to bind the new socket");
-        return cc3000_server(*this, socket_address);
-    }
-    if (_socket.listen(tcp_socket, 1) != 0) { /* 1 client */
-        DBG_CC("Failed to listen on the new socket");
-        return cc3000_server(*this, socket_address);
-    }
-
-    return cc3000_server(*this, socket_address, tcp_socket);
-}
-
-void cc3000::delete_profiles(void) {
-    tUserFS user_info;
-
-    _wlan.ioctl_set_connection_policy(0, 0, 0);
-    _wlan.ioctl_del_profile(255);
-
-    get_user_file_info((uint8_t *)&user_info, sizeof(user_info));
-    user_info.FTC = 0;
-    set_user_file_info((uint8_t *)&user_info, sizeof(user_info));
-}
-
-void cc3000::set_user_file_info(uint8_t *info_file, size_t size) {
-    _nvmem.write( NVMEM_USER_FILE_1_FILEID, size, 0, info_file);
-}
-
-bool cc3000::disconnect(void){
-    if (_wlan.disconnect()) {
-        return false;
-    } else {
-        return true;
-    }
-}
-
-uint32_t cc3000::ping(uint32_t ip, uint8_t attempts, uint16_t timeout, uint8_t size) {
-    uint32_t reversed_ip = (ip >> 24) | (ip >> 8) & 0xFF00 | (ip << 8) & 0xFF0000 | (ip << 24);
-
-    _ping_report.packets_received = 0;
-    if (_netapp.ping_send(&reversed_ip, attempts, size, timeout) == -1) {
-        DBG_CC("Failed to send ping");
-        return 0;
-    }
-    wait_ms(timeout*attempts*2);
-
-    /* known issue of cc3000 - sent number is send + received */
-    // TODO : Remove the Sent/recv'd counts until ti fix the firmware issue?
-    DBG_CC("Sent: %d",_ping_report.packets_sent);
-    DBG_CC("Received: %d",_ping_report.packets_received);
-    DBG_CC("Min time: %d",_ping_report.min_round_time);
-    DBG_CC("Max time: %d",_ping_report.max_round_time);
-    DBG_CC("Avg time: %d",_ping_report.avg_round_time);
-
-    return _ping_report.packets_received;
-}
-
-/* Conversion between uint types and C strings */
-uint8_t* UINT32_TO_STREAM_f (uint8_t *p, uint32_t u32)
-{
-    *(p)++ = (uint8_t)(u32);
-    *(p)++ = (uint8_t)((u32) >> 8);
-    *(p)++ = (uint8_t)((u32) >> 16);
-    *(p)++ = (uint8_t)((u32) >> 24);
-    return p;
-}
-
-
-uint8_t* UINT16_TO_STREAM_f (uint8_t *p, uint16_t u16)
-{
-    *(p)++ = (uint8_t)(u16);
-    *(p)++ = (uint8_t)((u16) >> 8);
-    return p;
-}
-
-
-uint16_t STREAM_TO_UINT16_f(uint8_t *p, uint16_t offset)
-{
-    return (uint16_t)((uint16_t)((uint16_t)
-           (*(p + offset + 1)) << 8) + (uint16_t)(*(p + offset)));
-}
-
-
-uint32_t STREAM_TO_UINT32_f(uint8_t *p, uint16_t offset)
-{
-    return (uint32_t)((uint32_t)((uint32_t)
-           (*(p + offset + 3)) << 24) + (uint32_t)((uint32_t)
-           (*(p + offset + 2)) << 16) + (uint32_t)((uint32_t)
-           (*(p + offset + 1)) << 8) + (uint32_t)(*(p + offset)));
-}
-
-} /* end of mbed_cc3000 namespace */
-
+/*****************************************************************************
+*
+*  C++ interface/implementation created by Martin Kojtal (0xc0170). Thanks to
+*  Jim Carver and Frank Vannieuwkerke for their inital cc3000 mbed port and
+*  provided help.
+*
+*  This version of "host driver" uses CC3000 Host Driver Implementation. Thus
+*  read the following copyright:
+*
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#include "cc3000.h"
+#include "cc3000_event.h"
+
+namespace mbed_cc3000 {
+
+/* TODO this prefix remove? verify */
+static uint8_t cc3000_prefix[] = {'T', 'T', 'T'};
+cc3000 *cc3000::_inst;
+
+cc3000::cc3000(PinName cc3000_irq, PinName cc3000_en, PinName cc3000_cs, SPI cc3000_spi, IRQn_Type irq_port)
+            :  _event(_simple_link, _hci, _spi, *this), _socket(_simple_link, _hci, _event), _spi(cc3000_irq, cc3000_en, cc3000_cs, cc3000_spi, irq_port, _event, _simple_link), _hci(_spi),
+            _nvmem(_hci, _event, _simple_link), _netapp(_simple_link, _nvmem, _hci, _event), _wlan(_simple_link, _event, _spi, _hci) {
+    /* TODO - pIRQ riorities ?? */
+
+    _simple_link.set_tx_complete_signal(1);
+    _status.dhcp = 0;
+    _status.connected = 0;
+    _status.socket = 0;
+    _status.dhcp_configured = 0;
+    _status.smart_config_complete = 0;
+    _status.stop_smart_config = 0;
+    _status.ok_to_shut_down = 0;
+
+    _inst = this;
+}
+
+cc3000::~cc3000() {
+
+}
+
+void cc3000::usync_callback(int32_t event_type, uint8_t * data, uint8_t length) {
+    if (event_type == HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE)
+    {
+        _status.smart_config_complete = 1;
+        _status.stop_smart_config = 1;
+    }
+
+    if (event_type == HCI_EVNT_WLAN_UNSOL_CONNECT)
+    {
+        _status.connected = 1;
+    }
+
+    if (event_type == HCI_EVNT_WLAN_UNSOL_DISCONNECT)
+    {
+        _status.connected = 0;
+        _status.dhcp      = 0;
+        _status.dhcp_configured = 0;
+    }
+
+    if (event_type == HCI_EVNT_WLAN_UNSOL_DHCP)
+    {
+      if ( *(data + NETAPP_IPCONFIG_MAC_OFFSET) == 0) {
+          _status.dhcp = 1;
+      } else {
+          _status.dhcp = 0;
+      }
+    }
+
+    if (event_type == HCI_EVENT_CC3000_CAN_SHUT_DOWN)
+    {
+        _status.ok_to_shut_down = 1;
+    }
+
+    if (event_type == HCI_EVNT_WLAN_ASYNC_PING_REPORT)
+    {
+        memcpy(&_ping_report, data, length);
+    }
+
+    if (event_type == HCI_EVNT_BSD_TCP_CLOSE_WAIT) {
+        uint8_t socketnum;
+        socketnum = data[0];
+        if (socketnum < MAX_SOCKETS) {
+            _closed_sockets[socketnum] = true; /* clients socket is closed */
+        }
+    }
+}
+
+void cc3000::start_smart_config(const uint8_t *smart_config_key) {
+    // Reset all the previous configuration
+    _wlan.ioctl_set_connection_policy(0, 0, 0);
+    _wlan.ioctl_del_profile(255);
+
+    //Wait until CC3000 is disconected
+    while (_status.connected == 1)
+    {
+        wait_us(5);
+        _event.hci_unsolicited_event_handler();
+    }
+
+    // Trigger the Smart Config process
+
+    _wlan.smart_config_set_prefix(cc3000_prefix);
+    // Start the Smart Config process with AES disabled
+    _wlan.smart_config_start(0);
+
+    DBG_CC("Waiting for smartconfig to be completed");
+
+    // Wait for Smart config finished
+    while (_status.smart_config_complete == 0)
+    {
+        wait_ms(100);
+
+    }
+
+    DBG_CC("Smartconfig finished");
+
+#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
+    // create new entry for AES encryption key
+    _nvmem.create_entry(NVMEM_AES128_KEY_FILEID, 16);
+    // write AES key to NVMEM
+    _security.aes_write_key((uint8_t *)(&smart_config_key[0]));
+    // Decrypt configuration information and add profile
+    _wlan.smart_config_process();
+#endif
+
+    // Configure to connect automatically to the AP retrieved in the
+    // Smart config process
+    _wlan.ioctl_set_connection_policy(0, 1, 1);
+
+    // reset the CC3000
+    _wlan.stop();
+    wait(2);
+    _wlan.start(0);
+    wait(2);
+
+    // Mask out all non-required events
+    _wlan.set_event_mask(HCI_EVNT_WLAN_KEEPALIVE|HCI_EVNT_WLAN_UNSOL_INIT|HCI_EVNT_WLAN_ASYNC_PING_REPORT);
+}
+
+bool cc3000::connect_secure(const uint8_t *ssid, const uint8_t *key, int32_t security_mode) {
+    uint32_t ret;
+
+    _wlan.disconnect();
+    wait_ms(3);
+    ret = _wlan.connect(security_mode, ssid, strlen((const char *)ssid), 0, (uint8_t *)key, strlen((const char *)key));
+    if (ret == 0) { /* TODO static internal cc3000 state 0 to TRUE */
+      ret = true;
+    } else {
+      ret = false;
+    }
+    return ret;
+}
+
+bool cc3000::connect_to_AP(const uint8_t *ssid, const uint8_t *key, int32_t security_mode) {
+    Timer t;  /* TODO static? */
+    bool ret = true;
+
+    t.start();
+    while (is_connected() == false) {
+        if (key == 0) {
+            if (connect_open(ssid)) {
+                break;
+            }
+        } else {
+#ifndef CC3000_TINY_DRIVER
+            if (connect_secure(ssid,key,security_mode)) {
+                break;
+            }
+#else
+            return false; /* secure connection not supported with TINY_DRIVER */
+#endif
+        }
+
+        /* timeout 10 seconds */
+        if (t.read_ms() > 10000){
+            ret = false;
+
+            DBG_CC("Connection to AP failed");
+
+            break;
+        }
+    }
+
+    return ret;
+}
+
+void cc3000::start(uint8_t patch) {
+    _wlan.start(patch);
+    _wlan.set_event_mask(HCI_EVNT_WLAN_UNSOL_INIT | HCI_EVNT_WLAN_KEEPALIVE);
+}
+
+void cc3000::stop(void) {
+    _wlan.stop();
+}
+
+void cc3000::restart(uint8_t patch) {
+    _wlan.stop();
+    wait_ms(500);
+    _wlan.start(patch);
+}
+
+bool cc3000::connect_open(const uint8_t *ssid) {
+    uint32_t ret;
+
+    _wlan.disconnect();
+    wait_ms(3);
+#ifndef CC3000_TINY_DRIVER
+    ret = _wlan.connect(0,ssid, strlen((const char *)ssid), 0, 0, 0);
+#else
+    ret = _wlan.connect(ssid, strlen((const char *)ssid));
+#endif
+    if (ret == 0) {
+        ret = true;
+    } else {
+        ret = false;
+    }
+    return ret;
+}
+
+bool cc3000::is_connected() {
+    return _status.connected;
+}
+
+bool cc3000::is_dhcp_configured() {
+    return _status.dhcp;
+}
+
+bool cc3000::is_smart_confing_completed() {
+    return _status.smart_config_complete;
+}
+
+uint8_t cc3000::get_mac_address(uint8_t address[6]) {
+    return _nvmem.get_mac_address(address);
+}
+
+uint8_t cc3000::set_mac_address(uint8_t address[6]) {
+    return _nvmem.set_mac_address(address);
+}
+
+void cc3000::get_user_file_info(uint8_t *info_file, size_t size) {
+    _nvmem.read( NVMEM_USER_FILE_1_FILEID, size, 0, info_file);
+}
+
+#ifndef CC3000_TINY_DRIVER
+bool cc3000::get_ip_config(tNetappIpconfigRetArgs *ip_config) {
+    if ((_status.dhcp == false) || (_status.connected == false)) {
+        return false;
+    }
+
+    _netapp.ipconfig(ip_config);
+    return true;
+}
+#endif
+
+cc3000_client cc3000::create_tcp_client(uint32_t ip_address, uint16_t port) {
+    sockaddr socket_address = {0};
+    int32_t tcp_socket;
+
+    tcp_socket = _socket.socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
+    if (tcp_socket == -1) {
+        DBG_CC("Failed to create new socket (tcp)");
+        return cc3000_client(*this);
+    }
+
+    socket_address.family = AF_INET;
+    socket_address.data[0] = (port & 0xFF00) >> 8;
+    socket_address.data[1] = (port & 0x00FF);
+    socket_address.data[2] = ip_address >> 24;
+    socket_address.data[3] = ip_address >> 16;
+    socket_address.data[4] = ip_address >> 8;
+    socket_address.data[5] = ip_address;
+
+    if (_socket.connect(tcp_socket, &socket_address, sizeof(socket_address)) == -1) {
+        DBG_CC("Failed to connect (tcp)");
+        _socket.closesocket(tcp_socket);
+        return cc3000_client(*this);
+    }
+
+    return cc3000_client(*this, tcp_socket);
+}
+cc3000_client cc3000::create_udp_client(uint32_t ip_address, uint16_t port) {
+    sockaddr socket_address = {0};
+    int32_t udp_socket;
+
+    udp_socket = _socket.socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
+    if (udp_socket == -1) {
+        DBG_CC("Failed to create new socket (udp)");
+        return cc3000_client(*this);
+    }
+
+    socket_address.family = AF_INET;
+    socket_address.data[0] = (port & 0xFF00) >> 8;
+    socket_address.data[1] = (port & 0x00FF);
+    socket_address.data[2] = ip_address >> 24;
+    socket_address.data[3] = ip_address >> 16;
+    socket_address.data[4] = ip_address >> 8;
+    socket_address.data[5] = ip_address;
+
+    if (_socket.connect(udp_socket, &socket_address, sizeof(socket_address)) == -1) {
+        DBG_CC("Failed to connect (udp)");
+        _socket.closesocket(udp_socket);
+        return cc3000_client(*this);
+    }
+
+    return cc3000_client(*this, udp_socket);
+}
+
+cc3000_server cc3000::create_tcp_server(uint32_t ip_address, uint16_t port) {
+    sockaddr socket_address = {0};
+    int32_t tcp_socket;
+
+    tcp_socket = _socket.socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
+    if (tcp_socket == -1) {
+        DBG_CC("Failed to create new socket.");
+        return cc3000_server(*this, socket_address);
+    }
+
+    socket_address.family = AF_INET;
+    socket_address.data[0] = (port & 0xFF00) >> 8;
+    socket_address.data[1] = (port & 0x00FF);
+    socket_address.data[2] = ip_address >> 24;
+    socket_address.data[3] = ip_address >> 16;
+    socket_address.data[4] = ip_address >> 8;
+    socket_address.data[5] = ip_address;
+
+    if (_socket.bind(tcp_socket, &socket_address, sizeof(socket_address)) != 0) {
+        DBG_CC("Failed to bind the new socket");
+        return cc3000_server(*this, socket_address);
+    }
+    if (_socket.listen(tcp_socket, 1) != 0) { /* 1 client */
+        DBG_CC("Failed to listen on the new socket");
+        return cc3000_server(*this, socket_address);
+    }
+
+    return cc3000_server(*this, socket_address, tcp_socket);
+}
+
+void cc3000::delete_profiles(void) {
+    tUserFS user_info;
+
+    _wlan.ioctl_set_connection_policy(0, 0, 0);
+    _wlan.ioctl_del_profile(255);
+
+    get_user_file_info((uint8_t *)&user_info, sizeof(user_info));
+    user_info.FTC = 0;
+    set_user_file_info((uint8_t *)&user_info, sizeof(user_info));
+}
+
+void cc3000::set_user_file_info(uint8_t *info_file, size_t size) {
+    _nvmem.write( NVMEM_USER_FILE_1_FILEID, size, 0, info_file);
+}
+
+bool cc3000::disconnect(void){
+    if (_wlan.disconnect()) {
+        return false;
+    } else {
+        return true;
+    }
+}
+
+uint32_t cc3000::ping(uint32_t ip, uint8_t attempts, uint16_t timeout, uint8_t size) {
+    uint32_t reversed_ip = (ip >> 24) | (ip >> 8) & 0xFF00 | (ip << 8) & 0xFF0000 | (ip << 24);
+
+    _ping_report.packets_received = 0;
+    if (_netapp.ping_send(&reversed_ip, attempts, size, timeout) == -1) {
+        DBG_CC("Failed to send ping");
+        return 0;
+    }
+    wait_ms(timeout*attempts*2);
+
+    /* known issue of cc3000 - sent number is send + received */
+    // TODO : Remove the Sent/recv'd counts until ti fix the firmware issue?
+    DBG_CC("Sent: %d",_ping_report.packets_sent);
+    DBG_CC("Received: %d",_ping_report.packets_received);
+    DBG_CC("Min time: %d",_ping_report.min_round_time);
+    DBG_CC("Max time: %d",_ping_report.max_round_time);
+    DBG_CC("Avg time: %d",_ping_report.avg_round_time);
+
+    return _ping_report.packets_received;
+}
+
+/* Conversion between uint types and C strings */
+uint8_t* UINT32_TO_STREAM_f (uint8_t *p, uint32_t u32)
+{
+    *(p)++ = (uint8_t)(u32);
+    *(p)++ = (uint8_t)((u32) >> 8);
+    *(p)++ = (uint8_t)((u32) >> 16);
+    *(p)++ = (uint8_t)((u32) >> 24);
+    return p;
+}
+
+
+uint8_t* UINT16_TO_STREAM_f (uint8_t *p, uint16_t u16)
+{
+    *(p)++ = (uint8_t)(u16);
+    *(p)++ = (uint8_t)((u16) >> 8);
+    return p;
+}
+
+
+uint16_t STREAM_TO_UINT16_f(uint8_t *p, uint16_t offset)
+{
+    return (uint16_t)((uint16_t)((uint16_t)
+           (*(p + offset + 1)) << 8) + (uint16_t)(*(p + offset)));
+}
+
+
+uint32_t STREAM_TO_UINT32_f(uint8_t *p, uint16_t offset)
+{
+    return (uint32_t)((uint32_t)((uint32_t)
+           (*(p + offset + 3)) << 24) + (uint32_t)((uint32_t)
+           (*(p + offset + 2)) << 16) + (uint32_t)((uint32_t)
+           (*(p + offset + 1)) << 8) + (uint32_t)(*(p + offset)));
+}
+
+} /* end of mbed_cc3000 namespace */
+