lps25h_class.h

00001 /**
00002  ******************************************************************************
00003  * @file    lps25h_class.h
00004  * @author  AST / EST
00005  * @version V0.0.1
00006  * @date    14-April-2015
00007  * @brief   Header file for component LPS25H
00008  ******************************************************************************
00009  * @attention
00010  *
00011  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
00012  *
00013  * Redistribution and use in source and binary forms, with or without modification,
00014  * are permitted provided that the following conditions are met:
00015  *   1. Redistributions of source code must retain the above copyright notice,
00016  *      this list of conditions and the following disclaimer.
00017  *   2. Redistributions in binary form must reproduce the above copyright notice,
00018  *      this list of conditions and the following disclaimer in the documentation
00019  *      and/or other materials provided with the distribution.
00020  *   3. Neither the name of STMicroelectronics nor the names of its contributors
00021  *      may be used to endorse or promote products derived from this software
00022  *       without specific prior written permission.
00023  *
00024  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00025  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00026  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
00027  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
00028  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00029  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
00030  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00031  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00032  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00033  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00034  *
00035  ******************************************************************************
00036 */
00037 
00038 #ifndef __LPS25H_CLASS_H
00039 #define __LPS25H_CLASS_H
00040 
00041 /* Includes ------------------------------------------------------------------*/
00042 #include "mbed.h"
00043 #include "DevI2C.h"
00044 #include "lps25h.h"
00045 #include "../Interfaces/PressureSensor.h"
00046 #include "../Interfaces/TempSensor.h"
00047 
00048 /* Classes -------------------------------------------------------------------*/
00049 /** Class representing a LPS25H sensor component
00050  */
00051 class LPS25H : public PressureSensor, public TempSensor {
00052  public:
00053     /** Constructor
00054      * @param[in] i2c device I2C to be used for communication
00055      */
00056         LPS25H(DevI2C &i2c) : PressureSensor(), TempSensor(), dev_i2c(i2c) {
00057         LPS25H_SlaveAddress = LPS25H_ADDRESS_HIGH;
00058     }
00059     
00060     /** Destructor
00061      */
00062         virtual ~LPS25H() {}
00063     
00064     /*** Interface Methods ***/
00065     virtual int Init(void *init_struct) {
00066         return LPS25H_Init((PRESSURE_InitTypeDef*)init_struct);
00067     }
00068 
00069     /**
00070      * @brief       Enter sensor shutdown mode
00071      * @return      0 in case of success, an error code otherwise
00072      */
00073     virtual int PowerOff(void) {
00074         return LPS25H_PowerOff();
00075     }
00076 
00077     virtual int ReadID(uint8_t *p_id) {
00078         return LPS25H_ReadID(p_id);
00079     }
00080 
00081     /**
00082      * @brief       Reset sensor
00083      * @return      0 in case of success, an error code otherwise
00084      */
00085     virtual int Reset(void) {
00086         return LPS25H_RebootCmd();
00087     }
00088 
00089     virtual int GetPressure(float *pfData) {
00090         return LPS25H_GetPressure(pfData);
00091     }
00092 
00093     virtual int GetTemperature(float *pfData) {
00094         return LPS25H_GetTemperature(pfData);
00095     }
00096 
00097     void SlaveAddrRemap(uint8_t SA0_Bit_Status) {
00098         LPS25H_SlaveAddrRemap(SA0_Bit_Status);
00099     }
00100 
00101 protected:
00102     /*** Methods ***/
00103     PRESSURE_StatusTypeDef LPS25H_Init(PRESSURE_InitTypeDef *LPS25H_Init);
00104     PRESSURE_StatusTypeDef LPS25H_ReadID(uint8_t *p_id);
00105     PRESSURE_StatusTypeDef LPS25H_RebootCmd(void);
00106     PRESSURE_StatusTypeDef LPS25H_GetPressure(float* pfData);
00107     PRESSURE_StatusTypeDef LPS25H_GetTemperature(float* pfData);
00108     PRESSURE_StatusTypeDef LPS25H_PowerOff(void);
00109     void LPS25H_SlaveAddrRemap(uint8_t SA0_Bit_Status);
00110     
00111     PRESSURE_StatusTypeDef LPS25H_PowerOn(void);
00112     PRESSURE_StatusTypeDef LPS25H_I2C_ReadRawPressure(int32_t *raw_press);
00113     PRESSURE_StatusTypeDef LPS25H_I2C_ReadRawTemperature(int16_t *raw_data);
00114 
00115     /**
00116      * @brief  Configures LPS25H interrupt lines for NUCLEO boards
00117      */
00118     void LPS25H_IO_ITConfig(void)
00119     {
00120         /* To be implemented */
00121     }
00122 
00123     /**
00124      * @brief  Configures LPS25H I2C interface
00125      * @return PRESSURE_OK in case of success, an error code otherwise
00126      */
00127     PRESSURE_StatusTypeDef LPS25H_IO_Init(void)
00128     {
00129         return PRESSURE_OK; /* done in constructor */
00130     }
00131 
00132     /**
00133      * @brief      Utility function to read data from LPS25H
00134      * @param[out] pBuffer pointer to the byte-array to read data in to
00135      * @param[in]  RegisterAddr specifies internal address register to read from.
00136      * @param[in]  NumByteToRead number of bytes to be read.
00137      * @retval     PRESSURE_OK if ok, 
00138      * @retval     PRESSURE_ERROR if an I2C error has occured
00139      */
00140     PRESSURE_StatusTypeDef LPS25H_IO_Read(uint8_t* pBuffer, 
00141                           uint8_t RegisterAddr, uint16_t NumByteToRead)
00142     {
00143         int ret = dev_i2c.i2c_read(pBuffer,
00144                        LPS25H_SlaveAddress,
00145                        RegisterAddr,
00146                        NumByteToRead);
00147         if(ret != 0) {
00148             return PRESSURE_ERROR;
00149         }
00150         return PRESSURE_OK;
00151     }
00152     
00153     /**
00154      * @brief      Utility function to write data to LPS25H
00155      * @param[in]  pBuffer pointer to the byte-array data to send
00156      * @param[in]  RegisterAddr specifies internal address register to read from.
00157      * @param[in]  NumByteToWrite number of bytes to write.
00158      * @retval     PRESSURE_OK if ok, 
00159      * @retval     PRESSURE_ERROR if an I2C error has occured
00160      */
00161     PRESSURE_StatusTypeDef LPS25H_IO_Write(uint8_t* pBuffer, 
00162                            uint8_t RegisterAddr, uint16_t NumByteToWrite)
00163     {
00164         int ret = dev_i2c.i2c_write(pBuffer,
00165                         LPS25H_SlaveAddress,
00166                         RegisterAddr,
00167                         NumByteToWrite);
00168         if(ret != 0) {
00169             return PRESSURE_ERROR;
00170         }
00171         return PRESSURE_OK;
00172     }
00173     
00174     /*** Instance Variables ***/
00175     /* IO Device */
00176     DevI2C &dev_i2c;
00177 
00178     uint8_t LPS25H_SlaveAddress;
00179 };
00180 
00181 #endif // __LPS25H_CLASS_H