Hotboards MX
Read the temperaure in celsius and then convert to Fahrenheit degrees, and also display the value on the serial port.
Dependencies: Hotboards_temp mbed
Revision 0:44c15fe6cc16, committed 2016-03-22
- Comitter:
- Hotboards
- Date:
- Tue Mar 22 22:09:37 2016 +0000
- Commit message:
- first release
Changed in this revision
diff -r 000000000000 -r 44c15fe6cc16 Hotboards_temp.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Hotboards_temp.lib Tue Mar 22 22:09:37 2016 +0000 @@ -0,0 +1,1 @@ +https://developer.mbed.org/users/Hotboards/code/Hotboards_temp/#f850ee1083ba
diff -r 000000000000 -r 44c15fe6cc16 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Tue Mar 22 22:09:37 2016 +0000
@@ -0,0 +1,45 @@
+#include "mbed.h"
+/*
+ Hotboards temp Library - Farenheit degrees
+ Read the temperaure in celsius and then convert to Farenheit degrees, and also display
+ the value on the serial port.
+ The circuit
+ * VDD --> 3.3v
+ * SDA --> PB_9
+ * SCL --> PB_8
+ * ALERT --> PB_13
+ * GND --> GND
+ Library and example created by Diego from Hotboards
+ Ported to mbed by Pedro from Hotboards
+ This example code is in the public domain.
+ */
+#include "mbed.h"
+#include "Hotboards_temp.h"
+
+Serial pc(USBTX, USBRX);
+//I2C bus instance for the library
+I2C device( I2C_SDA, I2C_SCL );
+// instance a sensor with address number 7 (none of the jumpers on the board is short circuited)
+// and also 0.5 celsius degrees resolution
+Hotboards_temp sensor( device, Sensor_7);
+
+
+
+int main( void )
+{
+
+ // init sensor
+ sensor.init();
+
+ while(1)
+ {
+ // read temperature in celcius degrees
+ float temp = sensor.read();
+ // convert celcius to fahrenheit
+ float tempF = sensor.CelsiusToFarenheit( temp);
+ // print it on the serial port
+ pc.printf("Temp sensor : %3.1f F\r\n",tempF);
+ // take the next value after 2 sec (just to not read too often)
+ wait(2);
+ }
+}
diff -r 000000000000 -r 44c15fe6cc16 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Tue Mar 22 22:09:37 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/c0f6e94411f5 \ No newline at end of file