Ethernetwebsoc
Dependencies: C12832_lcd LM75B WebSocketClient mbed-rtos mbed Socket lwip-eth lwip-sys lwip
RTX_Conf_CM.c
00001 /*---------------------------------------------------------------------------- 00002 * RL-ARM - RTX 00003 *---------------------------------------------------------------------------- 00004 * Name: RTX_Conf_CM.C 00005 * Purpose: Configuration of CMSIS RTX Kernel for Cortex-M 00006 * Rev.: V4.20 00007 *---------------------------------------------------------------------------- 00008 * 00009 * Copyright (c) 1999-2009 KEIL, 2009-2012 ARM Germany GmbH 00010 * All rights reserved. 00011 * Redistribution and use in source and binary forms, with or without 00012 * modification, are permitted provided that the following conditions are met: 00013 * - Redistributions of source code must retain the above copyright 00014 * notice, this list of conditions and the following disclaimer. 00015 * - Redistributions in binary form must reproduce the above copyright 00016 * notice, this list of conditions and the following disclaimer in the 00017 * documentation and/or other materials provided with the distribution. 00018 * - Neither the name of ARM nor the names of its contributors may be used 00019 * to endorse or promote products derived from this software without 00020 * specific prior written permission. 00021 * 00022 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 00023 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 00024 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 00025 * ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE 00026 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 00027 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 00028 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 00029 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 00030 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 00031 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 00032 * POSSIBILITY OF SUCH DAMAGE. 00033 *---------------------------------------------------------------------------*/ 00034 00035 #include "cmsis_os.h" 00036 00037 00038 /*---------------------------------------------------------------------------- 00039 * RTX User configuration part BEGIN 00040 *---------------------------------------------------------------------------*/ 00041 00042 //-------- <<< Use Configuration Wizard in Context Menu >>> ----------------- 00043 // 00044 // <h>Thread Configuration 00045 // ======================= 00046 // 00047 // <o>Number of concurrent running threads <0-250> 00048 // <i> Defines max. number of threads that will run at the same time. 00049 // counting "main", but not counting "osTimerThread" 00050 // <i> Default: 6 00051 #ifndef OS_TASKCNT 00052 # if defined(TARGET_LPC1768) || defined(TARGET_LPC2368) 00053 # define OS_TASKCNT 14 00054 # elif defined(TARGET_LPC11U24) 00055 # define OS_TASKCNT 6 00056 # endif 00057 #endif 00058 00059 // <o>Scheduler (+ interrupts) stack size [bytes] <64-4096:8><#/4> 00060 #ifndef OS_SCHEDULERSTKSIZE 00061 # if defined(TARGET_LPC1768) || defined(TARGET_LPC2368) 00062 # define OS_SCHEDULERSTKSIZE 256 00063 # elif defined(TARGET_LPC11U24) 00064 # define OS_SCHEDULERSTKSIZE 128 00065 # endif 00066 #endif 00067 00068 // <o>Idle stack size [bytes] <64-4096:8><#/4> 00069 // <i> Defines default stack size for the Idle thread. 00070 #ifndef OS_IDLESTKSIZE 00071 #define OS_IDLESTKSIZE 128 00072 #endif 00073 00074 // <o>Timer Thread stack size [bytes] <64-4096:8><#/4> 00075 // <i> Defines stack size for Timer thread. 00076 // <i> Default: 200 00077 #ifndef OS_TIMERSTKSZ 00078 #define OS_TIMERSTKSZ WORDS_STACK_SIZE 00079 #endif 00080 00081 // <q>Check for stack overflow 00082 // =========================== 00083 // <i> Includes the stack checking code for stack overflow. 00084 // <i> Note that additional code reduces the Kernel performance. 00085 #ifndef OS_STKCHECK 00086 #define OS_STKCHECK 1 00087 #endif 00088 00089 // <q>Run in privileged mode 00090 // ========================= 00091 // <i> Runs all Threads in privileged mode. 00092 // <i> Default: Unprivileged 00093 #ifndef OS_RUNPRIV 00094 #define OS_RUNPRIV 1 00095 #endif 00096 00097 // </h> 00098 // <h>SysTick Timer Configuration 00099 // ============================== 00100 // 00101 // <o>Timer clock value [Hz] <1-1000000000> 00102 // <i> Defines the timer clock value. 00103 // <i> Default: 6000000 (6MHz) 00104 #ifndef OS_CLOCK 00105 # if defined(TARGET_LPC1768) || defined(TARGET_LPC2368) 00106 # define OS_CLOCK 96000000 00107 # elif defined(TARGET_LPC11U24) 00108 # define OS_CLOCK 48000000 00109 # endif 00110 #endif 00111 00112 // <o>Timer tick value [us] <1-1000000> 00113 // <i> Defines the timer tick value. 00114 // <i> Default: 1000 (1ms) 00115 #ifndef OS_TICK 00116 #define OS_TICK 1000 00117 #endif 00118 00119 // </h> 00120 00121 // <h>System Configuration 00122 // ======================= 00123 // 00124 // <e>Round-Robin Thread switching 00125 // =============================== 00126 // 00127 // <i> Enables Round-Robin Thread switching. 00128 #ifndef OS_ROBIN 00129 #define OS_ROBIN 1 00130 #endif 00131 00132 // <o>Round-Robin Timeout [ticks] <1-1000> 00133 // <i> Defines how long a thread will execute before a thread switch. 00134 // <i> Default: 5 00135 #ifndef OS_ROBINTOUT 00136 #define OS_ROBINTOUT 5 00137 #endif 00138 00139 // </e> 00140 00141 // <e>User Timers 00142 // ============== 00143 // <i> Enables user Timers 00144 #ifndef OS_TIMERS 00145 #define OS_TIMERS 1 00146 #endif 00147 00148 // <o>Timer Thread Priority 00149 // <1=> Low 00150 // <2=> Below Normal 00151 // <3=> Normal 00152 // <4=> Above Normal 00153 // <5=> High 00154 // <6=> Realtime 00155 // <i> Defines priority for Timer Thread 00156 // <i> Default: High 00157 #ifndef OS_TIMERPRIO 00158 #define OS_TIMERPRIO 5 00159 #endif 00160 00161 // <o>Timer Callback Queue size <1-32> 00162 // <i> Defines number of concurrent callbacks that will be queued. 00163 // <i> Default: 4 00164 #ifndef OS_TIMERCBQSZ 00165 #define OS_TIMERCBQS 4 00166 #endif 00167 00168 // </e> 00169 00170 // <o>ISR FIFO Queue size<4=> 4 entries <8=> 8 entries 00171 // <12=> 12 entries <16=> 16 entries 00172 // <24=> 24 entries <32=> 32 entries 00173 // <48=> 48 entries <64=> 64 entries 00174 // <96=> 96 entries 00175 // <i> ISR functions store requests to this buffer, 00176 // <i> when they are called from the iterrupt handler. 00177 // <i> Default: 16 entries 00178 #ifndef OS_FIFOSZ 00179 #define OS_FIFOSZ 16 00180 #endif 00181 00182 // </h> 00183 00184 //------------- <<< end of configuration section >>> ----------------------- 00185 00186 // Standard library system mutexes 00187 // =============================== 00188 // Define max. number system mutexes that are used to protect 00189 // the arm standard runtime library. For microlib they are not used. 00190 #ifndef OS_MUTEXCNT 00191 #define OS_MUTEXCNT 8 00192 #endif 00193 00194 /*---------------------------------------------------------------------------- 00195 * RTX User configuration part END 00196 *---------------------------------------------------------------------------*/ 00197 00198 #define OS_TRV ((uint32_t)(((double)OS_CLOCK*(double)OS_TICK)/1E6)-1) 00199 00200 00201 /*---------------------------------------------------------------------------- 00202 * OS Idle daemon 00203 *---------------------------------------------------------------------------*/ 00204 void os_idle_demon (void) { 00205 /* The idle demon is a system thread, running when no other thread is */ 00206 /* ready to run. */ 00207 00208 /* Sleep: ideally, we should put the chip to sleep. 00209 Unfortunately, this usually requires disconnecting the interface chip (debugger). 00210 This can be done, but it would break the local file system. 00211 */ 00212 for (;;) { 00213 // sleep(); 00214 } 00215 } 00216 00217 /*---------------------------------------------------------------------------- 00218 * RTX Errors 00219 *---------------------------------------------------------------------------*/ 00220 extern void mbed_die(void); 00221 00222 void os_error (uint32_t err_code) { 00223 /* This function is called when a runtime error is detected. Parameter */ 00224 /* 'err_code' holds the runtime error code (defined in RTX_Config.h). */ 00225 mbed_die(); 00226 } 00227 00228 void sysThreadError(osStatus status) { 00229 if (status != osOK) { 00230 mbed_die(); 00231 } 00232 } 00233 00234 /*---------------------------------------------------------------------------- 00235 * RTX Configuration Functions 00236 *---------------------------------------------------------------------------*/ 00237 00238 #include "RTX_CM_lib.h" 00239 00240 /*---------------------------------------------------------------------------- 00241 * end of file 00242 *---------------------------------------------------------------------------*/
Generated on Tue Jul 12 2022 19:26:07 by 1.7.2