Gonzalo Matarrubia / Mbed LPC1549 mod

This repo contains the libraries of Mbed for LPC1549 with following changes: - IAP commands. - EEPROM write and read. - UART write and read (public) - CAN can_s -> LPC_C_CAN0_Type *can

mbed/TARGET_LPC1549/TARGET_NXP/TARGET_LPC15XX/PinNames.h@0:820a69dfd200, 2015-04-14 (annotated)

Committer:
gmatarrubia
Date:
Tue Apr 14 15:00:13 2015 +0200
Revision:
0:820a69dfd200
Initial repo. IAP commands, EEPROM write/read, UART write/read, CAN

Who changed what in which revision?

UserRevisionLine numberNew contents of line
gmatarrubia 0:820a69dfd200 1 /* mbed Microcontroller Library
gmatarrubia 0:820a69dfd200 2 * Copyright (c) 2006-2014 ARM Limited
gmatarrubia 0:820a69dfd200 3 *
gmatarrubia 0:820a69dfd200 4 * Licensed under the Apache License, Version 2.0 (the "License");
gmatarrubia 0:820a69dfd200 5 * you may not use this file except in compliance with the License.
gmatarrubia 0:820a69dfd200 6 * You may obtain a copy of the License at
gmatarrubia 0:820a69dfd200 7 *
gmatarrubia 0:820a69dfd200 8 * http://www.apache.org/licenses/LICENSE-2.0
gmatarrubia 0:820a69dfd200 9 *
gmatarrubia 0:820a69dfd200 10 * Unless required by applicable law or agreed to in writing, software
gmatarrubia 0:820a69dfd200 11 * distributed under the License is distributed on an "AS IS" BASIS,
gmatarrubia 0:820a69dfd200 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
gmatarrubia 0:820a69dfd200 13 * See the License for the specific language governing permissions and
gmatarrubia 0:820a69dfd200 14 * limitations under the License.
gmatarrubia 0:820a69dfd200 15 */
gmatarrubia 0:820a69dfd200 16 #ifndef MBED_PINNAMES_H
gmatarrubia 0:820a69dfd200 17 #define MBED_PINNAMES_H
gmatarrubia 0:820a69dfd200 18
gmatarrubia 0:820a69dfd200 19 #include "cmsis.h"
gmatarrubia 0:820a69dfd200 20
gmatarrubia 0:820a69dfd200 21 #ifdef __cplusplus
gmatarrubia 0:820a69dfd200 22 extern "C" {
gmatarrubia 0:820a69dfd200 23 #endif
gmatarrubia 0:820a69dfd200 24
gmatarrubia 0:820a69dfd200 25 typedef enum {
gmatarrubia 0:820a69dfd200 26 PIN_INPUT,
gmatarrubia 0:820a69dfd200 27 PIN_OUTPUT
gmatarrubia 0:820a69dfd200 28 } PinDirection;
gmatarrubia 0:820a69dfd200 29
gmatarrubia 0:820a69dfd200 30 typedef enum {
gmatarrubia 0:820a69dfd200 31 // LPC Pin Names
gmatarrubia 0:820a69dfd200 32 P0_0 = 0,
gmatarrubia 0:820a69dfd200 33 P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
gmatarrubia 0:820a69dfd200 34 P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
gmatarrubia 0:820a69dfd200 35 P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12,
gmatarrubia 0:820a69dfd200 36
gmatarrubia 0:820a69dfd200 37 LED_RED = P0_25,
gmatarrubia 0:820a69dfd200 38 LED_GREEN = P0_3,
gmatarrubia 0:820a69dfd200 39 LED_BLUE = P1_1,
gmatarrubia 0:820a69dfd200 40
gmatarrubia 0:820a69dfd200 41 // mbed original LED naming
gmatarrubia 0:820a69dfd200 42 LED1 = LED_RED,
gmatarrubia 0:820a69dfd200 43 LED2 = LED_GREEN,
gmatarrubia 0:820a69dfd200 44 LED3 = LED_BLUE,
gmatarrubia 0:820a69dfd200 45 LED4 = LED_BLUE,
gmatarrubia 0:820a69dfd200 46
gmatarrubia 0:820a69dfd200 47 // Serial to USB pins
gmatarrubia 0:820a69dfd200 48 USBTX = P0_18,
gmatarrubia 0:820a69dfd200 49 USBRX = P0_13,
gmatarrubia 0:820a69dfd200 50
gmatarrubia 0:820a69dfd200 51 // Arduino Shield Receptacles Names
gmatarrubia 0:820a69dfd200 52 D0 = P0_13,
gmatarrubia 0:820a69dfd200 53 D1 = P0_18,
gmatarrubia 0:820a69dfd200 54 D2 = P0_29,
gmatarrubia 0:820a69dfd200 55 D3 = P0_9,
gmatarrubia 0:820a69dfd200 56 D4 = P0_10,
gmatarrubia 0:820a69dfd200 57 D5 = P0_16, // same port as D13
gmatarrubia 0:820a69dfd200 58 D6 = P1_3,
gmatarrubia 0:820a69dfd200 59 D7 = P0_0,
gmatarrubia 0:820a69dfd200 60 D8 = P0_24,
gmatarrubia 0:820a69dfd200 61 D9 = P1_0,
gmatarrubia 0:820a69dfd200 62 D10= P0_27,
gmatarrubia 0:820a69dfd200 63 D11= P0_28,
gmatarrubia 0:820a69dfd200 64 D12= P0_12,
gmatarrubia 0:820a69dfd200 65 D13= P0_16, // same port as D5
gmatarrubia 0:820a69dfd200 66 D14= P0_23,
gmatarrubia 0:820a69dfd200 67 D15= P0_22,
gmatarrubia 0:820a69dfd200 68
gmatarrubia 0:820a69dfd200 69 A0 = P0_8,
gmatarrubia 0:820a69dfd200 70 A1 = P0_7,
gmatarrubia 0:820a69dfd200 71 A2 = P0_6,
gmatarrubia 0:820a69dfd200 72 A3 = P0_5,
gmatarrubia 0:820a69dfd200 73 A4 = P0_23, // same port as SDA
gmatarrubia 0:820a69dfd200 74 A5 = P0_22, // same port as SCL
gmatarrubia 0:820a69dfd200 75 SDA= P0_23, // same port as A4
gmatarrubia 0:820a69dfd200 76 SCL= P0_22, // same port as A5
gmatarrubia 0:820a69dfd200 77
gmatarrubia 0:820a69dfd200 78 // Not connected
gmatarrubia 0:820a69dfd200 79 NC = (int)0xFFFFFFFF,
gmatarrubia 0:820a69dfd200 80 } PinName;
gmatarrubia 0:820a69dfd200 81
gmatarrubia 0:820a69dfd200 82 typedef enum {
gmatarrubia 0:820a69dfd200 83 PullUp = 2,
gmatarrubia 0:820a69dfd200 84 PullDown = 1,
gmatarrubia 0:820a69dfd200 85 PullNone = 0,
gmatarrubia 0:820a69dfd200 86 Repeater = 3,
gmatarrubia 0:820a69dfd200 87 OpenDrain = 4,
gmatarrubia 0:820a69dfd200 88 PullDefault = PullDown
gmatarrubia 0:820a69dfd200 89 } PinMode;
gmatarrubia 0:820a69dfd200 90
gmatarrubia 0:820a69dfd200 91 #define STDIO_UART_TX USBTX
gmatarrubia 0:820a69dfd200 92 #define STDIO_UART_RX USBRX
gmatarrubia 0:820a69dfd200 93
gmatarrubia 0:820a69dfd200 94 typedef struct {
gmatarrubia 0:820a69dfd200 95 unsigned char n;
gmatarrubia 0:820a69dfd200 96 unsigned char offset;
gmatarrubia 0:820a69dfd200 97 } SWM_Map;
gmatarrubia 0:820a69dfd200 98
gmatarrubia 0:820a69dfd200 99 #ifdef __cplusplus
gmatarrubia 0:820a69dfd200 100 }
gmatarrubia 0:820a69dfd200 101 #endif
gmatarrubia 0:820a69dfd200 102
gmatarrubia 0:820a69dfd200 103 #endif