Eric Lewiston
/
mbed-src
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed-src
by 
mbed official
Revision 469:fc4922e0c183, committed 2015-02-09
- Comitter:
- mbed_official
- Date:
- Mon Feb 09 09:30:07 2015 +0000
- Parent:
- 468:3f6bf90246bd
- Child:
- 470:07f8455214b5
- Commit message:
- Synchronized with git revision 06e2b3c8802cb4f78e9958ba9923755bd458e8b7
Full URL: https://github.com/mbedmicro/mbed/commit/06e2b3c8802cb4f78e9958ba9923755bd458e8b7/
Changed in this revision
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/PeripheralNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_3 = (int)TIM3_BASE,
- PWM_14 = (int)TIM14_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/PeripheralPins.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,151 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM1 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
-// {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM16)}, // TIM16_CH1
- {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
-// {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM17)}, // TIM17_CH1
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
- {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_TIM14)}, // TIM14_CH1
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1
- {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH1
- {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH2
-// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM15)}, // TIM15_CH1N
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLDOWN, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/PeripheralPins.h Mon Feb 09 09:00:07 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,62 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/PinNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,241 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
-
-
- // Arduino connector namings
- A0 = PC_0,
- A1 = PC_1,
- A2 = PC_2,
- A3 = PC_3,
- A4 = PC_4,
- A5 = PC_5,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PB_12,
- D3 = PB_11,
- D4 = PA_7,
- D5 = PB_9,
- D6 = PB_8,
- D7 = PA_6,
- D8 = PA_5,
- D9 = PA_4,
- D10 = PA_11,
- D11 = PB_5,
- D12 = PB_4,
- D13 = PB_3,
-// D14 = PB_9,
-// D15 = PB_8,
-
- // STM32F0-Discovery(STM32F051R8) connector namings
- PA0 = PA_0,
- PA1 = PA_1,
- PA2 = PA_2,
- PA3 = PA_3,
- PA4 = PA_4,
- PA5 = PA_5,
- PA6 = PA_6,
- PA7 = PA_7,
- PA8 = PA_8,
- PA9 = PA_9,
- PA10 = PA_10,
- PA11 = PA_11,
- PA12 = PA_12,
- PA13 = PA_13,
- PA14 = PA_14,
- PA15 = PA_15,
-
- PC0 = PC_0,
- PC1 = PC_1,
- PC2 = PC_2,
- PC3 = PC_3,
- PC4 = PC_4,
- PC5 = PC_5,
- PC6 = PC_6,
- PC7 = PC_7,
- PC8 = PC_8,
- PC9 = PC_9,
- PC10 = PC_10,
- PC11 = PC_13,
- PC12 = PC_12,
- PC13 = PC_13,
- PC14 = PC_14,
- PC15 = PC_15,
-
- PD2 = PD_2,
-
- PB0 = PB_0,
- PB1 = PB_1,
- PB2 = PB_2,
- PB3 = PB_3,
- PB4 = PB_4,
- PB5 = PB_5,
- PB6 = PB_6,
- PB7 = PB_7,
- PB8 = PB_8,
- PB9 = PB_9,
- PB10 = PB_10,
- PB11 = PB_11,
- PB12 = PB_12,
- PB13 = PB_13,
- PB14 = PB_14,
- PB15 = PB_15,
- // Generic signals namings
- LED1 = PC_9,
- LED2 = PC_8,
- LED3 = PC_9,
- LED4 = PC_8,
- USER_BUTTON = PA_0,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/PortNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/analogin_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,175 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.EOCSelection = EOC_SINGLE_CONV;
- AdcHandle.Init.LowPowerAutoWait = DISABLE;
- AdcHandle.Init.LowPowerAutoPowerOff = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.ExternalTrigConv = ADC_SOFTWARE_START;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.Overrun = OVR_DATA_OVERWRITTEN;
- HAL_ADC_Init(&AdcHandle);
-
- // Run the ADC calibration
- HAL_ADCEx_Calibration_Start(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
- sConfig.SamplingTime = ADC_SAMPLETIME_7CYCLES_5;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- // Clear all channels as it is not done in HAL_ADC_ConfigChannel()
- AdcHandle.Instance->CHSELR = 0;
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/device.h Mon Feb 09 09:00:07 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -//#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/gpio_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC) {
- return;
- }
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRR;
- obj->reg_clr = &gpio->BRR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/gpio_irq_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,268 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0_1, EXTI2_3, EXTI4_15)
-#define CHANNEL_NUM (3)
-
-// Max pins for one line (max with EXTI4_15)
-#define MAX_PIN_LINE (12)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0_1
- 0, // pin 0
- 1, // pin 1
- // EXTI2_3
- 0, // pin 2
- 1, // pin 3
- // EXTI4_15
- 0, // pin 4
- 1, // pin 5
- 2, // pin 6
- 3, // pin 7
- 4, // pin 8
- 5, // pin 9
- 6, // pin 10
- 7, // pin 11
- 8, // pin 12
- 9, // pin 13
- 10, // pin 14
- 11 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI lines 0 to 1
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 2);
-}
-
-// EXTI lines 2 to 3
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 2);
-}
-
-// EXTI lines 4 to 15
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 12);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- if ((pin_index == 0) || (pin_index == 1)) {
- irq_n = EXTI0_1_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- } else if ((pin_index == 2) || (pin_index == 3)) {
- irq_n = EXTI2_3_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- } else if ((pin_index > 3) && (pin_index < 16)) {
- irq_n = EXTI4_15_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- } else {
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/gpio_object.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_set;
- __IO uint32_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj) {
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/i2c_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,390 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_SYSCLK);
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // Common settings: I2C clock = 48 MHz, Analog filter = ON, Digital filter coefficient = 0
- switch (hz) {
- case 100000:
- I2cHandle.Init.Timing = 0x10805E89; // Standard mode with Rise Time = 400ns and Fall Time = 100ns
- break;
- case 400000:
- I2cHandle.Init.Timing = 0x00901850; // Fast mode with Rise Time = 250ns and Fall Time = 100ns
- break;
- case 1000000:
- I2cHandle.Init.Timing = 0x00700818; // Fast mode Plus with Rise Time = 60ns and Fall Time = 100ns
- break;
- default:
- break;
- }
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
- HAL_I2C_Init(&I2cHandle);
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR2 |= I2C_CR2_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR2 |= I2C_CR2_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
-
- // Read all bytes
- for (count = 0; count < length; count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
-
- for (count = 0; count < length; count++) {
- i2c_byte_write(obj, data[count]);
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->RXDR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the previous byte is transmitted
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- i2c->TXDR = (uint8_t)data;
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // Wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // disable
- i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
- // enable
- i2c->OAR1 |= I2C_OAR1_OA1EN;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
-
- // Enable / disable slave
- if (enable_slave == 1) {
- tmpreg |= I2C_OAR1_OA1EN;
- } else {
- tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
- }
-
- // Set new mode
- i2c->OAR1 = tmpreg;
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- int size = 0;
-
- while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- int size = 0;
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- do {
- i2c_byte_write(obj, data[size]);
- size++;
- } while (size < length);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/mbed_overrides.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,35 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/objects.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,109 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/pinmap.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,137 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset IT and EVT (not in STM32Cube HAL)
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- case PortF:
- gpio_add = GPIOF_BASE;
- __GPIOF_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect SWDIO and SWCLK signals ?
- // Warning: For debugging it is necessary to reconnect under reset if this is done.
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2) pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/port_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/pwmout_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,206 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_14) __TIM14_CLK_ENABLE();
- if (obj->pwm == PWM_15) __TIM15_CLK_ENABLE();
- if (obj->pwm == PWM_16) __TIM16_CLK_ENABLE();
- if (obj->pwm == PWM_17) __TIM17_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
- // Channels 1
- case PA_4:
- case PA_6:
- case PB_1:
- case PB_4:
- case PB_8:
- case PB_9:
- case PB_14:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
- // Channels 1N
- case PB_6:
- case PB_7:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
- // Channels 2
- case PA_7:
- case PB_5:
- case PB_15:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
- // Channels 3
- case PB_0:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
- // Channels 4
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
-
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/rtc_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,201 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // This value is LSI typical value. To be measured precisely using a timer input capture for example.
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/serial_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,322 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (2)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- // Disable the reception overrun detection
- UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT;
- UartHandle.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- obj->index = 0;
- }
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- obj->index = 1;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- volatile uint32_t tmpval = UartHandle.Instance->RDR; // Clear RXNE bit
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TCIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TC);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->RDR & (uint16_t)0xFF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->TDR = (uint32_t)(c & (uint16_t)0xFF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- __HAL_UART_SEND_REQ(&UartHandle, UART_RXDATA_FLUSH_REQUEST);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- // [TODO]
-}
-
-void serial_break_clear(serial_t *obj)
-{
- // [TODO]
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/sleep.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,59 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-void sleep(void)
-{
- // Stop HAL systick
- HAL_SuspendTick();
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
- // Restart HAL systick
- HAL_ResumeTick();
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- HAL_InitTick(TICK_INT_PRIORITY);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-
- HAL_InitTick(TICK_INT_PRIORITY);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/spi_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,297 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- // Note: The frequencies are obtained with SPI clock = 48 MHz (APB clock)
- if (hz < 375000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 188 kHz
- } else if ((hz >= 375000) && (hz < 750000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
- } else if ((hz >= 750000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 750 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
- }
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/us_ticker.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,179 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-// Timer selection:
-#define TIM_MST TIM1
-#define TIM_MST_UP_IRQ TIM1_BRK_UP_TRG_COM_IRQn
-#define TIM_MST_OC_IRQ TIM1_CC_IRQn
-#define TIM_MST_RCC __TIM1_CLK_ENABLE()
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-
-static int us_ticker_inited = 0;
-static volatile uint32_t SlaveCounter = 0;
-static volatile uint32_t oc_int_part = 0;
-static volatile uint16_t oc_rem_part = 0;
-
-void set_compare(uint16_t count)
-{
- TimMasterHandle.Instance = TIM_MST;
-
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, count);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-// Used to increment the slave counter
-static void tim_update_irq_handler(void)
-{
- TimMasterHandle.Instance = TIM_MST;
-
- // Clear Update interrupt flag
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE);
- SlaveCounter++;
- }
-}
-
-// Used by interrupt system
-static void tim_oc_irq_handler(void)
-{
- uint16_t cval = TIM_MST->CNT;
- TimMasterHandle.Instance = TIM_MST;
-
- // Clear CC1 interrupt flag
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
- }
-
- if (oc_rem_part > 0) {
- set_compare(oc_rem_part); // Finish the remaining time left
- oc_rem_part = 0;
- } else {
- if (oc_int_part > 0) {
- set_compare(0xFFFF);
- oc_rem_part = cval; // To finish the counter loop the next time
- oc_int_part--;
- } else {
- us_ticker_irq_handler();
- }
- }
-}
-
-void us_ticker_init(void)
-{
-
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- // Enable timer clock
- TIM_MST_RCC;
-
- // Configure time base
- TimMasterHandle.Instance = TIM_MST;
- TimMasterHandle.Init.Period = 0xFFFF;
- TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 �s tick
- TimMasterHandle.Init.ClockDivision = 0;
- TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_Base_Init(&TimMasterHandle);
-
- // Configure interrupts
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_UPDATE);
-
- // Update interrupt used for 32-bit counter
- NVIC_SetVector(TIM_MST_UP_IRQ, (uint32_t)tim_update_irq_handler);
- NVIC_EnableIRQ(TIM_MST_UP_IRQ);
-
- // Output compare interrupt used for timeout feature
- NVIC_SetVector(TIM_MST_OC_IRQ, (uint32_t)tim_oc_irq_handler);
- NVIC_EnableIRQ(TIM_MST_OC_IRQ);
-
- // Enable timer
- HAL_TIM_Base_Start(&TimMasterHandle);
-}
-
-uint32_t us_ticker_read()
-{
- uint32_t counter, counter2;
- if (!us_ticker_inited) us_ticker_init();
- // A situation might appear when Master overflows right after Slave is read and before the
- // new (overflowed) value of Master is read. Which would make the code below consider the
- // previous (incorrect) value of Slave and the new value of Master, which would return a
- // value in the past. Avoid this by computing consecutive values of the timer until they
- // are properly ordered.
- counter = (uint32_t)(SlaveCounter << 16);
- counter += TIM_MST->CNT;
- while (1) {
- counter2 = (uint32_t)(SlaveCounter << 16);
- counter2 += TIM_MST->CNT;
- if (counter2 > counter) {
- break;
- }
- counter = counter2;
- }
- return counter2;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- int delta = (int)((uint32_t)timestamp - us_ticker_read());
- uint16_t cval = TIM_MST->CNT;
-
- if (delta <= 0) { // This event was in the past
- us_ticker_irq_handler();
- } else {
- oc_int_part = (uint32_t)(delta >> 16);
- oc_rem_part = (uint16_t)(delta & 0xFFFF);
- if (oc_rem_part <= (0xFFFF - cval)) {
- set_compare(cval + oc_rem_part);
- oc_rem_part = 0;
- } else {
- set_compare(0xFFFF);
- oc_rem_part = oc_rem_part - (0xFFFF - cval);
- }
- }
-}
-
-void us_ticker_disable_interrupt(void)
-{
- TimMasterHandle.Instance = TIM_MST;
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- TimMasterHandle.Instance = TIM_MST;
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/PeripheralNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_3 = (int)TIM3_BASE,
- PWM_14 = (int)TIM14_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/PeripheralPins.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,151 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM1 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
-// {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM16)}, // TIM16_CH1
- {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
-// {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM17)}, // TIM17_CH1
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
- {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_TIM14)}, // TIM14_CH1
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1
- {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH1
- {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH2
-// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM15)}, // TIM15_CH1N
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLDOWN, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/PeripheralPins.h Mon Feb 09 09:00:07 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,62 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/PinNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,188 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
-
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PC_7,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/PortNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/analogin_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,175 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.EOCSelection = EOC_SINGLE_CONV;
- AdcHandle.Init.LowPowerAutoWait = DISABLE;
- AdcHandle.Init.LowPowerAutoPowerOff = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.ExternalTrigConv = ADC_SOFTWARE_START;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.Overrun = OVR_DATA_OVERWRITTEN;
- HAL_ADC_Init(&AdcHandle);
-
- // Run the ADC calibration
- HAL_ADCEx_Calibration_Start(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
- sConfig.SamplingTime = ADC_SAMPLETIME_7CYCLES_5;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- // Clear all channels as it is not done in HAL_ADC_ConfigChannel()
- AdcHandle.Instance->CHSELR = 0;
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/device.h Mon Feb 09 09:00:07 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/gpio_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC) {
- return;
- }
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRR;
- obj->reg_clr = &gpio->BRR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/gpio_irq_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,267 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0_1, EXTI2_3, EXTI4_15)
-#define CHANNEL_NUM (3)
-
-// Max pins for one line (max with EXTI4_15)
-#define MAX_PIN_LINE (12)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0_1
- 0, // pin 0
- 1, // pin 1
- // EXTI2_3
- 0, // pin 2
- 1, // pin 3
- // EXTI4_15
- 0, // pin 4
- 1, // pin 5
- 2, // pin 6
- 3, // pin 7
- 4, // pin 8
- 5, // pin 9
- 6, // pin 10
- 7, // pin 11
- 8, // pin 12
- 9, // pin 13
- 10, // pin 14
- 11 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI lines 0 to 1
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 2);
-}
-
-// EXTI lines 2 to 3
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 2);
-}
-
-// EXTI lines 4 to 15
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 12);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- if ((pin_index == 0) || (pin_index == 1)) {
- irq_n = EXTI0_1_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- } else if ((pin_index == 2) || (pin_index == 3)) {
- irq_n = EXTI2_3_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- } else if ((pin_index > 3) && (pin_index < 16)) {
- irq_n = EXTI4_15_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- } else {
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/gpio_object.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_set;
- __IO uint32_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj) {
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/i2c_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,390 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_SYSCLK);
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // Common settings: I2C clock = 48 MHz, Analog filter = ON, Digital filter coefficient = 0
- switch (hz) {
- case 100000:
- I2cHandle.Init.Timing = 0x10805E89; // Standard mode with Rise Time = 400ns and Fall Time = 100ns
- break;
- case 400000:
- I2cHandle.Init.Timing = 0x00901850; // Fast mode with Rise Time = 250ns and Fall Time = 100ns
- break;
- case 1000000:
- I2cHandle.Init.Timing = 0x00700818; // Fast mode Plus with Rise Time = 60ns and Fall Time = 100ns
- break;
- default:
- break;
- }
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
- HAL_I2C_Init(&I2cHandle);
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR2 |= I2C_CR2_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR2 |= I2C_CR2_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
-
- // Read all bytes
- for (count = 0; count < length; count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
-
- for (count = 0; count < length; count++) {
- i2c_byte_write(obj, data[count]);
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->RXDR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the previous byte is transmitted
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- i2c->TXDR = (uint8_t)data;
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // Wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // disable
- i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
- // enable
- i2c->OAR1 |= I2C_OAR1_OA1EN;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
-
- // Enable / disable slave
- if (enable_slave == 1) {
- tmpreg |= I2C_OAR1_OA1EN;
- } else {
- tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
- }
-
- // Set new mode
- i2c->OAR1 = tmpreg;
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- char size = 0;
-
- while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- char size = 0;
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- do {
- i2c_byte_write(obj, data[size]);
- size++;
- } while (size < length);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/mbed_overrides.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,35 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/objects.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,104 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/pinmap.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,139 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset IT and EVT (not in STM32Cube HAL)
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- case PortF:
- gpio_add = GPIOF_BASE;
- __GPIOF_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect SWDIO and SWCLK signals ?
- // Warning: For debugging it is necessary to reconnect under reset if this is done.
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2) pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/port_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/pwmout_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,206 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_14) __TIM14_CLK_ENABLE();
- if (obj->pwm == PWM_15) __TIM15_CLK_ENABLE();
- if (obj->pwm == PWM_16) __TIM16_CLK_ENABLE();
- if (obj->pwm == PWM_17) __TIM17_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
- // Channels 1
- case PA_4:
- case PA_6:
- case PB_1:
- case PB_4:
- case PB_8:
- case PB_9:
- case PB_14:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
- // Channels 1N
- case PB_6:
- case PB_7:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
- // Channels 2
- case PA_7:
- case PB_5:
- case PB_15:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
- // Channels 3
- case PB_0:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
- // Channels 4
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
-
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/rtc_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,201 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // This value is LSI typical value. To be measured precisely using a timer input capture for example.
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/serial_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,324 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (2)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- // Disable the reception overrun detection
- UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT;
- UartHandle.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- obj->index = 0;
- }
-
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- obj->index = 1;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
-
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- volatile uint32_t tmpval = UartHandle.Instance->RDR; // Clear RXNE bit
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TCIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TC);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->RDR & (uint16_t)0xFF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->TDR = (uint32_t)(c & (uint16_t)0xFF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- __HAL_UART_SEND_REQ(&UartHandle, UART_RXDATA_FLUSH_REQUEST);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- // [TODO]
-}
-
-void serial_break_clear(serial_t *obj)
-{
- // [TODO]
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/sleep.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,59 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-void sleep(void)
-{
- // Stop HAL systick
- HAL_SuspendTick();
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
- // Restart HAL systick
- HAL_ResumeTick();
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- HAL_InitTick(TICK_INT_PRIORITY);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-
- HAL_InitTick(TICK_INT_PRIORITY);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/spi_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,298 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- // Note: The frequencies are obtained with SPI clock = 48 MHz (APB clock)
- if (hz < 375000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 188 kHz
- } else if ((hz >= 375000) && (hz < 750000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
- } else if ((hz >= 750000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 750 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
- }
-
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/us_ticker.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,179 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-// Timer selection:
-#define TIM_MST TIM1
-#define TIM_MST_UP_IRQ TIM1_BRK_UP_TRG_COM_IRQn
-#define TIM_MST_OC_IRQ TIM1_CC_IRQn
-#define TIM_MST_RCC __TIM1_CLK_ENABLE()
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-
-static int us_ticker_inited = 0;
-static volatile uint32_t SlaveCounter = 0;
-static volatile uint32_t oc_int_part = 0;
-static volatile uint16_t oc_rem_part = 0;
-
-void set_compare(uint16_t count)
-{
- TimMasterHandle.Instance = TIM_MST;
-
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, count);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-// Used to increment the slave counter
-static void tim_update_irq_handler(void)
-{
- TimMasterHandle.Instance = TIM_MST;
-
- // Clear Update interrupt flag
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE);
- SlaveCounter++;
- }
-}
-
-// Used by interrupt system
-static void tim_oc_irq_handler(void)
-{
- uint16_t cval = TIM_MST->CNT;
- TimMasterHandle.Instance = TIM_MST;
-
- // Clear CC1 interrupt flag
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
- }
- if (oc_rem_part > 0) {
- set_compare(oc_rem_part); // Finish the remaining time left
- oc_rem_part = 0;
- } else {
- if (oc_int_part > 0) {
- set_compare(0xFFFF);
- oc_rem_part = cval; // To finish the counter loop the next time
- oc_int_part--;
- } else {
- us_ticker_irq_handler();
- }
- }
-
-}
-
-void us_ticker_init(void)
-{
-
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- // Enable timer clock
- TIM_MST_RCC;
-
- // Configure time base
- TimMasterHandle.Instance = TIM_MST;
- TimMasterHandle.Init.Period = 0xFFFF;
- TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 �s tick
- TimMasterHandle.Init.ClockDivision = 0;
- TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_Base_Init(&TimMasterHandle);
-
- // Configure interrupts
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_UPDATE);
-
- // Update interrupt used for 32-bit counter
- NVIC_SetVector(TIM_MST_UP_IRQ, (uint32_t)tim_update_irq_handler);
- NVIC_EnableIRQ(TIM_MST_UP_IRQ);
-
- // Output compare interrupt used for timeout feature
- NVIC_SetVector(TIM_MST_OC_IRQ, (uint32_t)tim_oc_irq_handler);
- NVIC_EnableIRQ(TIM_MST_OC_IRQ);
-
- // Enable timer
- HAL_TIM_Base_Start(&TimMasterHandle);
-}
-
-uint32_t us_ticker_read()
-{
- uint32_t counter, counter2;
- if (!us_ticker_inited) us_ticker_init();
- // A situation might appear when Master overflows right after Slave is read and before the
- // new (overflowed) value of Master is read. Which would make the code below consider the
- // previous (incorrect) value of Slave and the new value of Master, which would return a
- // value in the past. Avoid this by computing consecutive values of the timer until they
- // are properly ordered.
- counter = (uint32_t)(SlaveCounter << 16);
- counter += TIM_MST->CNT;
- while (1) {
- counter2 = (uint32_t)(SlaveCounter << 16);
- counter2 += TIM_MST->CNT;
- if (counter2 > counter) {
- break;
- }
- counter = counter2;
- }
- return counter2;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- int delta = (int)((uint32_t)timestamp - us_ticker_read());
- uint16_t cval = TIM_MST->CNT;
-
- if (delta <= 0) { // This event was in the past
- us_ticker_irq_handler();
- } else {
- oc_int_part = (uint32_t)(delta >> 16);
- oc_rem_part = (uint16_t)(delta & 0xFFFF);
- if (oc_rem_part <= (0xFFFF - cval)) {
- set_compare(cval + oc_rem_part);
- oc_rem_part = 0;
- } else {
- set_compare(0xFFFF);
- oc_rem_part = oc_rem_part - (0xFFFF - cval);
- }
- }
-}
-
-void us_ticker_disable_interrupt(void)
-{
- TimMasterHandle.Instance = TIM_MST;
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- TimMasterHandle.Instance = TIM_MST;
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/PeripheralNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,77 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)USART4_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_14 = (int)TIM14_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/PeripheralPins.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,184 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM1 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_1, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15)}, // TIM15_CH1N
- {PA_2, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH1
- {PA_3, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH2
- {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
-// {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16)}, // TIM16_CH1
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
-// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
- {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17)}, // TIM17_CH1
-// {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1
-// {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2
-// {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3
-// {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH4
-
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH3
-// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14)}, // TIM14_CH1
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH4
-// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1
-// {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH2
-// {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
-// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15)}, // TIM15_CH1N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Warning: SWCLK is also on this pin
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
- {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
-// {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
- {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
- {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
-// {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
- {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/PeripheralPins.h Mon Feb 09 09:00:07 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,62 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/PinNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,183 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/PortNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/analogin_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,175 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.EOCSelection = EOC_SINGLE_CONV;
- AdcHandle.Init.LowPowerAutoWait = DISABLE;
- AdcHandle.Init.LowPowerAutoPowerOff = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.ExternalTrigConv = ADC_SOFTWARE_START;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.Overrun = OVR_DATA_OVERWRITTEN;
- HAL_ADC_Init(&AdcHandle);
-
- // Run the ADC calibration
- HAL_ADCEx_Calibration_Start(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
- sConfig.SamplingTime = ADC_SAMPLETIME_7CYCLES_5;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- // Clear all channels as it is not done in HAL_ADC_ConfigChannel()
- AdcHandle.Instance->CHSELR = 0;
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/device.h Mon Feb 09 09:00:07 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/gpio_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC) {
- return;
- }
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRR;
- obj->reg_clr = &gpio->BRR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/gpio_irq_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,267 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0_1, EXTI2_3, EXTI4_15)
-#define CHANNEL_NUM (3)
-
-// Max pins for one line (max with EXTI4_15)
-#define MAX_PIN_LINE (12)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0_1
- 0, // pin 0
- 1, // pin 1
- // EXTI2_3
- 0, // pin 2
- 1, // pin 3
- // EXTI4_15
- 0, // pin 4
- 1, // pin 5
- 2, // pin 6
- 3, // pin 7
- 4, // pin 8
- 5, // pin 9
- 6, // pin 10
- 7, // pin 11
- 8, // pin 12
- 9, // pin 13
- 10, // pin 14
- 11 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI lines 0 to 1
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 2);
-}
-
-// EXTI lines 2 to 3
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 2);
-}
-
-// EXTI lines 4 to 15
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 12);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- if ((pin_index == 0) || (pin_index == 1)) {
- irq_n = EXTI0_1_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- } else if ((pin_index == 2) || (pin_index == 3)) {
- irq_n = EXTI2_3_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- } else if ((pin_index > 3) && (pin_index < 16)) {
- irq_n = EXTI4_15_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- } else {
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/gpio_object.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_set;
- __IO uint32_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj) {
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/i2c_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,390 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_SYSCLK);
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // Common settings: I2C clock = 48 MHz, Analog filter = ON, Digital filter coefficient = 0
- switch (hz) {
- case 100000:
- I2cHandle.Init.Timing = 0x10805E89; // Standard mode with Rise Time = 400ns and Fall Time = 100ns
- break;
- case 400000:
- I2cHandle.Init.Timing = 0x00901850; // Fast mode with Rise Time = 250ns and Fall Time = 100ns
- break;
- case 1000000:
- I2cHandle.Init.Timing = 0x00700818; // Fast mode Plus with Rise Time = 60ns and Fall Time = 100ns
- break;
- default:
- break;
- }
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
- HAL_I2C_Init(&I2cHandle);
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR2 |= I2C_CR2_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR2 |= I2C_CR2_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
-
- // Read all bytes
- for (count = 0; count < length; count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
-
- for (count = 0; count < length; count++) {
- i2c_byte_write(obj, data[count]);
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->RXDR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the previous byte is transmitted
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- i2c->TXDR = (uint8_t)data;
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // Wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // disable
- i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
- // enable
- i2c->OAR1 |= I2C_OAR1_OA1EN;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
-
- // Enable / disable slave
- if (enable_slave == 1) {
- tmpreg |= I2C_OAR1_OA1EN;
- } else {
- tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
- }
-
- // Set new mode
- i2c->OAR1 = tmpreg;
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- char size = 0;
-
- while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- char size = 0;
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- do {
- i2c_byte_write(obj, data[size]);
- size++;
- } while (size < length);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/mbed_overrides.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,37 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/objects.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,104 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/pinmap.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,139 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset IT and EVT (not in STM32Cube HAL)
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- case PortF:
- gpio_add = GPIOF_BASE;
- __GPIOF_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect SWDIO and SWCLK signals ?
- // Warning: For debugging it is necessary to reconnect under reset if this is done.
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2) pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/port_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/pwmout_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,211 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_14) __TIM14_CLK_ENABLE();
- if (obj->pwm == PWM_15) __TIM15_CLK_ENABLE();
- if (obj->pwm == PWM_16) __TIM16_CLK_ENABLE();
- if (obj->pwm == PWM_17) __TIM17_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
- // Channels 1
- case PA_2:
- case PA_4:
- case PA_6:
- case PA_7:
- case PB_1:
- case PB_4:
- case PB_8:
- case PB_9:
- case PB_14:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
- // Channels 1N
- case PA_1:
- case PB_6:
- case PB_7:
- case PB_13:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
- // Channels 2
- case PA_3:
- case PB_5:
- case PB_15:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
- // Channels 3
- case PB_0:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
- // Channels 4
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
-
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/rtc_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,201 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // This value is LSI typical value. To be measured precisely using a timer input capture for example.
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/serial_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,366 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (4)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- // Disable the reception overrun detection
- UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT;
- UartHandle.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- obj->index = 0;
- }
-
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- obj->index = 1;
- }
-
- if (obj->uart == UART_3) {
- __USART3_CLK_ENABLE();
- obj->index = 2;
- }
-
- if (obj->uart == UART_4) {
- __USART4_CLK_ENABLE();
- obj->index = 3;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
-
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
-
- if (obj->uart == UART_3) {
- __USART3_FORCE_RESET();
- __USART3_RELEASE_RESET();
- __USART3_CLK_DISABLE();
- }
-
- if (obj->uart == UART_4) {
- __USART4_FORCE_RESET();
- __USART4_RELEASE_RESET();
- __USART4_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- volatile uint32_t tmpval = UartHandle.Instance->RDR; // Clear RXNE bit
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-static void uart3_irq(void)
-{
- uart_irq(UART_3, 2);
-}
-
-static void uart4_irq(void)
-{
- uart_irq(UART_4, 3);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_3) {
- irq_n = USART3_4_IRQn;
- vector = (uint32_t)&uart3_irq;
- }
-
- if (obj->uart == UART_4) {
- irq_n = USART3_4_IRQn;
- vector = (uint32_t)&uart4_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TCIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TC);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->RDR & (uint16_t)0xFF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->TDR = (uint32_t)(c & (uint16_t)0xFF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- __HAL_UART_SEND_REQ(&UartHandle, UART_RXDATA_FLUSH_REQUEST);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- // [TODO]
-}
-
-void serial_break_clear(serial_t *obj)
-{
- // [TODO]
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/sleep.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-void sleep(void)
-{
- TIM_HandleTypeDef TimMasterHandle;
-
- TimMasterHandle.Instance = TIM1;
-
- // Disable HAL tick and us_ticker update interrupts
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick and us_ticker update interrupts
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/spi_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,298 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- // Note: The frequencies are obtained with SPI clock = 48 MHz (APB clock)
- if (hz < 375000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 188 kHz
- } else if ((hz >= 375000) && (hz < 750000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
- } else if ((hz >= 750000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 750 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
- }
-
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/us_ticker.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,113 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-// Timer selection
-#define TIM_MST TIM1
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-volatile uint32_t SlaveCounter = 0;
-volatile uint32_t oc_int_part = 0;
-volatile uint16_t oc_rem_part = 0;
-
-void set_compare(uint16_t count)
-{
- TimMasterHandle.Instance = TIM_MST;
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, count);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- uint32_t counter, counter2;
- if (!us_ticker_inited) us_ticker_init();
- // A situation might appear when Master overflows right after Slave is read and before the
- // new (overflowed) value of Master is read. Which would make the code below consider the
- // previous (incorrect) value of Slave and the new value of Master, which would return a
- // value in the past. Avoid this by computing consecutive values of the timer until they
- // are properly ordered.
- counter = (uint32_t)(SlaveCounter << 16);
- counter += TIM_MST->CNT;
- while (1) {
- counter2 = (uint32_t)(SlaveCounter << 16);
- counter2 += TIM_MST->CNT;
- if (counter2 > counter) {
- break;
- }
- counter = counter2;
- }
- return counter2;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- int delta = (int)((uint32_t)timestamp - us_ticker_read());
- uint16_t cval = TIM_MST->CNT;
-
- if (delta <= 0) { // This event was in the past
- us_ticker_irq_handler();
- } else {
- oc_int_part = (uint32_t)(delta >> 16);
- oc_rem_part = (uint16_t)(delta & 0xFFFF);
- if (oc_rem_part <= (0xFFFF - cval)) {
- set_compare(cval + oc_rem_part);
- oc_rem_part = 0;
- } else {
- set_compare(0xFFFF);
- oc_rem_part = oc_rem_part - (0xFFFF - cval);
- }
- }
-}
-
-void us_ticker_disable_interrupt(void)
-{
- TimMasterHandle.Instance = TIM_MST;
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- TimMasterHandle.Instance = TIM_MST;
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/PeripheralNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,82 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)USART4_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_14 = (int)TIM14_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/PeripheralPins.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,198 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT2 (Warning: LED1 is also on this pin)
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM2 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
-// {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
- {PA_1, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15)}, // TIM15_CH1N
- {PA_2, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH1
-// {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
- {PA_3, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH2
-// {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
- {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
-// {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16)}, // TIM16_CH1
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
-// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
- {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17)}, // TIM17_CH1
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH4
-
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH3
-// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14)}, // TIM14_CH1
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH4
-// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
-// {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1
-// {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
-// {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH2
-// {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
-// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15)}, // TIM15_CH1N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Warning: SWCLK is also on this pin
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
- {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
-// {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
- {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
-// {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/PeripheralPins.h Mon Feb 09 09:00:07 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,66 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** DAC *** - -extern const PinMap PinMap_DAC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/PinNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,183 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/PortNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/analogin_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,175 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.EOCSelection = EOC_SINGLE_CONV;
- AdcHandle.Init.LowPowerAutoWait = DISABLE;
- AdcHandle.Init.LowPowerAutoPowerOff = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.ExternalTrigConv = ADC_SOFTWARE_START;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.Overrun = OVR_DATA_OVERWRITTEN;
- HAL_ADC_Init(&AdcHandle);
-
- // Run the ADC calibration
- HAL_ADCEx_Calibration_Start(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
- sConfig.SamplingTime = ADC_SAMPLETIME_7CYCLES_5;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- // Clear all channels as it is not done in HAL_ADC_ConfigChannel()
- AdcHandle.Instance->CHSELR = 0;
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/analogout_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,136 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-#define DAC_RANGE (0xFFF) // 12 bits
-
-static DAC_HandleTypeDef DacHandle;
-
-void analogout_init(dac_t *obj, PinName pin)
-{
- DAC_ChannelConfTypeDef sConfig;
-
- DacHandle.Instance = DAC;
-
- // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
- obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
- MBED_ASSERT(obj->dac != (DACName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_DAC);
-
- // Save the channel for future use
- obj->pin = pin;
-
- // Enable DAC clock
- __DAC1_CLK_ENABLE();
-
- // Configure DAC
- sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
- sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
-
- if (pin == PA_4) {
- HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
- } else { // PA_5
- HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_2);
- }
-
- analogout_write_u16(obj, 0);
-}
-
-void analogout_free(dac_t *obj)
-{
- // Reset DAC and disable clock
- __DAC1_FORCE_RESET();
- __DAC1_RELEASE_RESET();
- __DAC1_CLK_DISABLE();
-
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-static inline void dac_write(dac_t *obj, uint16_t value)
-{
- if (obj->pin == PA_4) {
- HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
- HAL_DAC_Start(&DacHandle, DAC_CHANNEL_1);
- } else { // PA_5
- HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
- HAL_DAC_Start(&DacHandle, DAC_CHANNEL_2);
- }
-}
-
-static inline int dac_read(dac_t *obj)
-{
- if (obj->pin == PA_4) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
- } else { // PA_5
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
- }
-}
-
-void analogout_write(dac_t *obj, float value)
-{
- if (value < 0.0f) {
- dac_write(obj, 0); // Min value
- } else if (value > 1.0f) {
- dac_write(obj, (uint16_t)DAC_RANGE); // Max value
- } else {
- dac_write(obj, (uint16_t)(value * (float)DAC_RANGE));
- }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value)
-{
- if (value > (uint16_t)DAC_RANGE) {
- dac_write(obj, (uint16_t)DAC_RANGE); // Max value
- } else {
- dac_write(obj, value);
- }
-}
-
-float analogout_read(dac_t *obj)
-{
- uint32_t value = dac_read(obj);
- return (float)((float)value * (1.0f / (float)DAC_RANGE));
-}
-
-uint16_t analogout_read_u16(dac_t *obj)
-{
- return (uint16_t)dac_read(obj);
-}
-
-#endif // DEVICE_ANALOGOUT
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/device.h Mon Feb 09 09:00:07 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/gpio_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC) {
- return;
- }
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRR;
- obj->reg_clr = &gpio->BRR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/gpio_irq_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,267 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0_1, EXTI2_3, EXTI4_15)
-#define CHANNEL_NUM (3)
-
-// Max pins for one line (max with EXTI4_15)
-#define MAX_PIN_LINE (12)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0_1
- 0, // pin 0
- 1, // pin 1
- // EXTI2_3
- 0, // pin 2
- 1, // pin 3
- // EXTI4_15
- 0, // pin 4
- 1, // pin 5
- 2, // pin 6
- 3, // pin 7
- 4, // pin 8
- 5, // pin 9
- 6, // pin 10
- 7, // pin 11
- 8, // pin 12
- 9, // pin 13
- 10, // pin 14
- 11 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI lines 0 to 1
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 2);
-}
-
-// EXTI lines 2 to 3
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 2);
-}
-
-// EXTI lines 4 to 15
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 12);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- if ((pin_index == 0) || (pin_index == 1)) {
- irq_n = EXTI0_1_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- } else if ((pin_index == 2) || (pin_index == 3)) {
- irq_n = EXTI2_3_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- } else if ((pin_index > 3) && (pin_index < 16)) {
- irq_n = EXTI4_15_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- } else {
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/gpio_object.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_set;
- __IO uint32_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj) {
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/i2c_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,390 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_SYSCLK);
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // Common settings: I2C clock = 48 MHz, Analog filter = ON, Digital filter coefficient = 0
- switch (hz) {
- case 100000:
- I2cHandle.Init.Timing = 0x10805E89; // Standard mode with Rise Time = 400ns and Fall Time = 100ns
- break;
- case 400000:
- I2cHandle.Init.Timing = 0x00901850; // Fast mode with Rise Time = 250ns and Fall Time = 100ns
- break;
- case 1000000:
- I2cHandle.Init.Timing = 0x00700818; // Fast mode Plus with Rise Time = 60ns and Fall Time = 100ns
- break;
- default:
- break;
- }
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
- HAL_I2C_Init(&I2cHandle);
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR2 |= I2C_CR2_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR2 |= I2C_CR2_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
-
- // Read all bytes
- for (count = 0; count < length; count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
-
- for (count = 0; count < length; count++) {
- i2c_byte_write(obj, data[count]);
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->RXDR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the previous byte is transmitted
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- i2c->TXDR = (uint8_t)data;
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // Wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // disable
- i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
- // enable
- i2c->OAR1 |= I2C_OAR1_OA1EN;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
-
- // Enable / disable slave
- if (enable_slave == 1) {
- tmpreg |= I2C_OAR1_OA1EN;
- } else {
- tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
- }
-
- // Set new mode
- i2c->OAR1 = tmpreg;
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- char size = 0;
-
- while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- char size = 0;
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- do {
- i2c_byte_write(obj, data[size]);
- size++;
- } while (size < length);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/mbed_overrides.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,37 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/objects.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,109 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/pinmap.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,139 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset IT and EVT (not in STM32Cube HAL)
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- case PortF:
- gpio_add = GPIOF_BASE;
- __GPIOF_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect SWDIO and SWCLK signals ?
- // Warning: For debugging it is necessary to reconnect under reset if this is done.
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2) pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/port_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/pwmout_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,216 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_14) __TIM14_CLK_ENABLE();
- if (obj->pwm == PWM_15) __TIM15_CLK_ENABLE();
- if (obj->pwm == PWM_16) __TIM16_CLK_ENABLE();
- if (obj->pwm == PWM_17) __TIM17_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
- // Channels 1
- case PA_2:
- case PA_4:
- case PA_6:
- case PA_7:
- case PA_8:
- case PB_1:
- case PB_4:
- case PB_8:
- case PB_9:
- case PB_14:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
- // Channels 1N
- case PA_1:
- case PB_6:
- case PB_7:
- case PB_13:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
- // Channels 2
- case PA_3:
- case PA_9:
- case PB_5:
- case PB_15:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
- // Channels 3
- case PA_10:
- case PB_0:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
- // Channels 4
- case PA_11:
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
-
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/rtc_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,201 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // This value is LSI typical value. To be measured precisely using a timer input capture for example.
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/serial_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,366 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (4)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- // Disable the reception overrun detection
- UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT;
- UartHandle.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- obj->index = 0;
- }
-
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- obj->index = 1;
- }
-
- if (obj->uart == UART_3) {
- __USART3_CLK_ENABLE();
- obj->index = 2;
- }
-
- if (obj->uart == UART_4) {
- __USART4_CLK_ENABLE();
- obj->index = 3;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
-
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
-
- if (obj->uart == UART_3) {
- __USART3_FORCE_RESET();
- __USART3_RELEASE_RESET();
- __USART3_CLK_DISABLE();
- }
-
- if (obj->uart == UART_4) {
- __USART4_FORCE_RESET();
- __USART4_RELEASE_RESET();
- __USART4_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- volatile uint32_t tmpval = UartHandle.Instance->RDR; // Clear RXNE bit
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-static void uart3_irq(void)
-{
- uart_irq(UART_3, 2);
-}
-
-static void uart4_irq(void)
-{
- uart_irq(UART_4, 3);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_3) {
- irq_n = USART3_4_IRQn;
- vector = (uint32_t)&uart3_irq;
- }
-
- if (obj->uart == UART_4) {
- irq_n = USART3_4_IRQn;
- vector = (uint32_t)&uart4_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TCIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TC);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->RDR & (uint16_t)0xFF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->TDR = (uint32_t)(c & (uint16_t)0xFF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- __HAL_UART_SEND_REQ(&UartHandle, UART_RXDATA_FLUSH_REQUEST);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- // [TODO]
-}
-
-void serial_break_clear(serial_t *obj)
-{
- // [TODO]
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/sleep.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void)
-{
- TimMasterHandle.Instance = TIM2;
-
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/spi_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,298 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- // Note: The frequencies are obtained with SPI clock = 48 MHz (APB clock)
- if (hz < 375000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 188 kHz
- } else if ((hz >= 375000) && (hz < 750000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
- } else if ((hz >= 750000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 750 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
- }
-
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/us_ticker.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,70 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-// 32-bit timer selection
-#define TIM_MST TIM2
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void)
-{
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/PeripheralNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,86 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)USART4_BASE,
- UART_5 = (int)USART5_BASE,
- UART_6 = (int)USART6_BASE,
- UART_7 = (int)USART7_BASE,
- UART_8 = (int)USART8_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_14 = (int)TIM14_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/PeripheralPins.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,220 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT2 (Warning: LED1 is also on this pin)
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PA_12, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
-// {PF_0, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // OSC_IN
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PA_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
-// {PF_1, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // OSC_OUT
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM2 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
-// {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
- {PA_1, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15)}, // TIM15_CH1N
- {PA_2, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH1
-// {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
- {PA_3, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH2
-// {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
- {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
-// {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16)}, // TIM16_CH1
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
-// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
- {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17)}, // TIM17_CH1
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH4
-
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH3
-// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14)}, // TIM14_CH1
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH4
-// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
-// {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1
-// {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
-// {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH2
-// {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
-// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15)}, // TIM15_CH1N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_4, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART6)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Warning: SWCLK is also on this pin
- {PB_3, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
-// {PC_0, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
- {PC_0, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART6)},
- {PC_2, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART8)},
- {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PC_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
- {PC_8, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART8)},
- {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
-// {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART5)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_5, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART6)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PB_4, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
-// {PC_1, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
- {PC_1, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART6)},
- {PC_3, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART8)},
- {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PC_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
- {PC_9, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART8)},
- {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
-// {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART5)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/PeripheralPins.h Mon Feb 09 09:00:07 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,66 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** DAC *** - -extern const PinMap PinMap_DAC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/PinNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,184 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_11 = 0x5B,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_4,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/PortNames.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/analogin_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,175 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.EOCSelection = EOC_SINGLE_CONV;
- AdcHandle.Init.LowPowerAutoWait = DISABLE;
- AdcHandle.Init.LowPowerAutoPowerOff = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.ExternalTrigConv = ADC_SOFTWARE_START;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.Overrun = OVR_DATA_OVERWRITTEN;
- HAL_ADC_Init(&AdcHandle);
-
- // Run the ADC calibration
- HAL_ADCEx_Calibration_Start(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
- sConfig.SamplingTime = ADC_SAMPLETIME_13CYCLES_5;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- // Clear all channels as it is not done in HAL_ADC_ConfigChannel()
- AdcHandle.Instance->CHSELR = 0;
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/analogout_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,136 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-#define DAC_RANGE (0xFFF) // 12 bits
-
-static DAC_HandleTypeDef DacHandle;
-
-void analogout_init(dac_t *obj, PinName pin)
-{
- DAC_ChannelConfTypeDef sConfig;
-
- DacHandle.Instance = DAC;
-
- // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
- obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
- MBED_ASSERT(obj->dac != (DACName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_DAC);
-
- // Save the channel for future use
- obj->pin = pin;
-
- // Enable DAC clock
- __DAC1_CLK_ENABLE();
-
- // Configure DAC
- sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
- sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
-
- if (pin == PA_4) {
- HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
- } else { // PA_5
- HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_2);
- }
-
- analogout_write_u16(obj, 0);
-}
-
-void analogout_free(dac_t *obj)
-{
- // Reset DAC and disable clock
- __DAC1_FORCE_RESET();
- __DAC1_RELEASE_RESET();
- __DAC1_CLK_DISABLE();
-
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-static inline void dac_write(dac_t *obj, uint16_t value)
-{
- if (obj->pin == PA_4) {
- HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
- HAL_DAC_Start(&DacHandle, DAC_CHANNEL_1);
- } else { // PA_5
- HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
- HAL_DAC_Start(&DacHandle, DAC_CHANNEL_2);
- }
-}
-
-static inline int dac_read(dac_t *obj)
-{
- if (obj->pin == PA_4) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
- } else { // PA_5
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
- }
-}
-
-void analogout_write(dac_t *obj, float value)
-{
- if (value < 0.0f) {
- dac_write(obj, 0); // Min value
- } else if (value > 1.0f) {
- dac_write(obj, (uint16_t)DAC_RANGE); // Max value
- } else {
- dac_write(obj, (uint16_t)(value * (float)DAC_RANGE));
- }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value)
-{
- if (value > (uint16_t)DAC_RANGE) {
- dac_write(obj, (uint16_t)DAC_RANGE); // Max value
- } else {
- dac_write(obj, value);
- }
-}
-
-float analogout_read(dac_t *obj)
-{
- uint32_t value = dac_read(obj);
- return (float)((float)value * (1.0f / (float)DAC_RANGE));
-}
-
-uint16_t analogout_read_u16(dac_t *obj)
-{
- return (uint16_t)dac_read(obj);
-}
-
-#endif // DEVICE_ANALOGOUT
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/device.h Mon Feb 09 09:00:07 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/gpio_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC) {
- return;
- }
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRR;
- obj->reg_clr = &gpio->BRR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/gpio_irq_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,267 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0_1, EXTI2_3, EXTI4_15)
-#define CHANNEL_NUM (3)
-
-// Max pins for one line (max with EXTI4_15)
-#define MAX_PIN_LINE (12)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0_1
- 0, // pin 0
- 1, // pin 1
- // EXTI2_3
- 0, // pin 2
- 1, // pin 3
- // EXTI4_15
- 0, // pin 4
- 1, // pin 5
- 2, // pin 6
- 3, // pin 7
- 4, // pin 8
- 5, // pin 9
- 6, // pin 10
- 7, // pin 11
- 8, // pin 12
- 9, // pin 13
- 10, // pin 14
- 11 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI lines 0 to 1
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 2);
-}
-
-// EXTI lines 2 to 3
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 2);
-}
-
-// EXTI lines 4 to 15
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 12);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- if ((pin_index == 0) || (pin_index == 1)) {
- irq_n = EXTI0_1_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- } else if ((pin_index == 2) || (pin_index == 3)) {
- irq_n = EXTI2_3_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- } else if ((pin_index > 3) && (pin_index < 16)) {
- irq_n = EXTI4_15_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- } else {
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/gpio_object.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_set;
- __IO uint32_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj) {
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/i2c_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,390 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_SYSCLK);
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // Common settings: I2C clock = 48 MHz, Analog filter = ON, Digital filter coefficient = 0
- switch (hz) {
- case 100000:
- I2cHandle.Init.Timing = 0x10805E89; // Standard mode with Rise Time = 400ns and Fall Time = 100ns
- break;
- case 400000:
- I2cHandle.Init.Timing = 0x00901850; // Fast mode with Rise Time = 250ns and Fall Time = 100ns
- break;
- case 1000000:
- I2cHandle.Init.Timing = 0x00700818; // Fast mode Plus with Rise Time = 60ns and Fall Time = 100ns
- break;
- default:
- break;
- }
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
- HAL_I2C_Init(&I2cHandle);
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR2 |= I2C_CR2_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR2 |= I2C_CR2_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
-
- // Read all bytes
- for (count = 0; count < length; count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
-
- for (count = 0; count < length; count++) {
- i2c_byte_write(obj, data[count]);
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->RXDR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the previous byte is transmitted
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- i2c->TXDR = (uint8_t)data;
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // Wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // disable
- i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
- // enable
- i2c->OAR1 |= I2C_OAR1_OA1EN;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
-
- // Enable / disable slave
- if (enable_slave == 1) {
- tmpreg |= I2C_OAR1_OA1EN;
- } else {
- tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
- }
-
- // Set new mode
- i2c->OAR1 = tmpreg;
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- char size = 0;
-
- while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- char size = 0;
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- do {
- i2c_byte_write(obj, data[size]);
- size++;
- } while (size < length);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/mbed_overrides.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,37 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/objects.h Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,109 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/pinmap.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,139 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset IT and EVT (not in STM32Cube HAL)
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- case PortF:
- gpio_add = GPIOF_BASE;
- __GPIOF_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect SWDIO and SWCLK signals ?
- // Warning: For debugging it is necessary to reconnect under reset if this is done.
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2) pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/port_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/pwmout_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,216 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_14) __TIM14_CLK_ENABLE();
- if (obj->pwm == PWM_15) __TIM15_CLK_ENABLE();
- if (obj->pwm == PWM_16) __TIM16_CLK_ENABLE();
- if (obj->pwm == PWM_17) __TIM17_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
- // Channels 1
- case PA_2:
- case PA_4:
- case PA_6:
- case PA_7:
- case PA_8:
- case PB_1:
- case PB_4:
- case PB_8:
- case PB_9:
- case PB_14:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
- // Channels 1N
- case PA_1:
- case PB_6:
- case PB_7:
- case PB_13:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
- // Channels 2
- case PA_3:
- case PA_9:
- case PB_5:
- case PB_15:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
- // Channels 3
- case PA_10:
- case PB_0:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
- // Channels 4
- case PA_11:
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
-
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/rtc_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,201 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // This value is LSI typical value. To be measured precisely using a timer input capture for example.
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/serial_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,450 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (8)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0, 0, 0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- // Disable the reception overrun detection
- UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT;
- UartHandle.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- obj->index = 0;
- }
-
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- obj->index = 1;
- }
-
- if (obj->uart == UART_3) {
- __USART3_CLK_ENABLE();
- obj->index = 2;
- }
-
- if (obj->uart == UART_4) {
- __USART4_CLK_ENABLE();
- obj->index = 3;
- }
-
- if (obj->uart == UART_5) {
- __USART5_CLK_ENABLE();
- obj->index = 4;
- }
-
- if (obj->uart == UART_6) {
- __USART6_CLK_ENABLE();
- obj->index = 5;
- }
-
- if (obj->uart == UART_7) {
- __USART7_CLK_ENABLE();
- obj->index = 6;
- }
-
- if (obj->uart == UART_8) {
- __USART8_CLK_ENABLE();
- obj->index = 7;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
-
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
-
- if (obj->uart == UART_3) {
- __USART3_FORCE_RESET();
- __USART3_RELEASE_RESET();
- __USART3_CLK_DISABLE();
- }
-
- if (obj->uart == UART_4) {
- __USART4_FORCE_RESET();
- __USART4_RELEASE_RESET();
- __USART4_CLK_DISABLE();
- }
-
- if (obj->uart == UART_5) {
- __USART5_FORCE_RESET();
- __USART5_RELEASE_RESET();
- __USART5_CLK_DISABLE();
- }
-
- if (obj->uart == UART_6) {
- __USART6_FORCE_RESET();
- __USART6_RELEASE_RESET();
- __USART6_CLK_DISABLE();
- }
-
- if (obj->uart == UART_7) {
- __USART7_FORCE_RESET();
- __USART7_RELEASE_RESET();
- __USART7_CLK_DISABLE();
- }
-
- if (obj->uart == UART_8) {
- __USART8_FORCE_RESET();
- __USART8_RELEASE_RESET();
- __USART8_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- volatile uint32_t tmpval = UartHandle.Instance->RDR; // Clear RXNE bit
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-static void uart3_irq(void)
-{
- uart_irq(UART_3, 2);
-}
-
-static void uart4_irq(void)
-{
- uart_irq(UART_4, 3);
-}
-
-static void uart5_irq(void)
-{
- uart_irq(UART_5, 4);
-}
-
-static void uart6_irq(void)
-{
- uart_irq(UART_6, 5);
-}
-
-static void uart7_irq(void)
-{
- uart_irq(UART_7, 6);
-}
-
-static void uart8_irq(void)
-{
- uart_irq(UART_8, 7);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_3) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart3_irq;
- }
-
- if (obj->uart == UART_4) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart4_irq;
- }
-
- if (obj->uart == UART_5) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart5_irq;
- }
-
- if (obj->uart == UART_6) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart6_irq;
- }
-
- if (obj->uart == UART_7) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart7_irq;
- }
-
- if (obj->uart == UART_8) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart8_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TCIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TC);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->RDR & (uint16_t)0xFF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->TDR = (uint32_t)(c & (uint16_t)0xFF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- __HAL_UART_SEND_REQ(&UartHandle, UART_RXDATA_FLUSH_REQUEST);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- // [TODO]
-}
-
-void serial_break_clear(serial_t *obj)
-{
- // [TODO]
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/sleep.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void)
-{
- TimMasterHandle.Instance = TIM2;
-
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/spi_api.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,298 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- // Note: The frequencies are obtained with SPI clock = 48 MHz (APB clock)
- if (hz < 375000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 188 kHz
- } else if ((hz >= 375000) && (hz < 750000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
- } else if ((hz >= 750000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 750 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
- }
-
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F091RC/us_ticker.c Mon Feb 09 09:00:07 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,70 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-// 32-bit timer selection
-#define TIM_MST TIM2
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void)
-{
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F0/PeripheralPins.h Mon Feb 09 09:30:07 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PeripheralNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,81 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE,
+ ADC_2 = (int)ADC_BASE
+} ADCName;
+
+typedef enum {
+ DAC_1 = (int)DAC_BASE
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_14 = (int)TIM14_BASE,
+ PWM_15 = (int)TIM15_BASE,
+ PWM_16 = (int)TIM16_BASE,
+ PWM_17 = (int)TIM17_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PeripheralPins.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,151 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM1 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
+// {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM16)}, // TIM16_CH1
+ {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
+// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
+// {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM17)}, // TIM17_CH1
+ {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
+ {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_TIM14)}, // TIM14_CH1
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1N
+ {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1N
+ {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1
+ {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1
+ {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH1
+ {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH2
+// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM15)}, // TIM15_CH1N
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
+ {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLDOWN, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PinNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,241 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+ PF_4 = 0x54,
+ PF_5 = 0x55,
+ PF_6 = 0x56,
+ PF_7 = 0x57,
+
+
+ // Arduino connector namings
+ A0 = PC_0,
+ A1 = PC_1,
+ A2 = PC_2,
+ A3 = PC_3,
+ A4 = PC_4,
+ A5 = PC_5,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PB_12,
+ D3 = PB_11,
+ D4 = PA_7,
+ D5 = PB_9,
+ D6 = PB_8,
+ D7 = PA_6,
+ D8 = PA_5,
+ D9 = PA_4,
+ D10 = PA_11,
+ D11 = PB_5,
+ D12 = PB_4,
+ D13 = PB_3,
+// D14 = PB_9,
+// D15 = PB_8,
+
+ // STM32F0-Discovery(STM32F051R8) connector namings
+ PA0 = PA_0,
+ PA1 = PA_1,
+ PA2 = PA_2,
+ PA3 = PA_3,
+ PA4 = PA_4,
+ PA5 = PA_5,
+ PA6 = PA_6,
+ PA7 = PA_7,
+ PA8 = PA_8,
+ PA9 = PA_9,
+ PA10 = PA_10,
+ PA11 = PA_11,
+ PA12 = PA_12,
+ PA13 = PA_13,
+ PA14 = PA_14,
+ PA15 = PA_15,
+
+ PC0 = PC_0,
+ PC1 = PC_1,
+ PC2 = PC_2,
+ PC3 = PC_3,
+ PC4 = PC_4,
+ PC5 = PC_5,
+ PC6 = PC_6,
+ PC7 = PC_7,
+ PC8 = PC_8,
+ PC9 = PC_9,
+ PC10 = PC_10,
+ PC11 = PC_13,
+ PC12 = PC_12,
+ PC13 = PC_13,
+ PC14 = PC_14,
+ PC15 = PC_15,
+
+ PD2 = PD_2,
+
+ PB0 = PB_0,
+ PB1 = PB_1,
+ PB2 = PB_2,
+ PB3 = PB_3,
+ PB4 = PB_4,
+ PB5 = PB_5,
+ PB6 = PB_6,
+ PB7 = PB_7,
+ PB8 = PB_8,
+ PB9 = PB_9,
+ PB10 = PB_10,
+ PB11 = PB_11,
+ PB12 = PB_12,
+ PB13 = PB_13,
+ PB14 = PB_14,
+ PB15 = PB_15,
+ // Generic signals namings
+ LED1 = PC_9,
+ LED2 = PC_8,
+ LED3 = PC_9,
+ LED4 = PC_8,
+ USER_BUTTON = PA_0,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PortNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortF = 5
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/device.h Mon Feb 09 09:30:07 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +//#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/objects.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,109 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName channel;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/PeripheralNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,76 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE,
+ ADC_2 = (int)ADC_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_14 = (int)TIM14_BASE,
+ PWM_15 = (int)TIM15_BASE,
+ PWM_16 = (int)TIM16_BASE,
+ PWM_17 = (int)TIM17_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/PeripheralPins.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,151 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM1 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
+// {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM16)}, // TIM16_CH1
+ {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
+// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
+// {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM17)}, // TIM17_CH1
+ {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
+ {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_TIM14)}, // TIM14_CH1
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1N
+ {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1N
+ {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1
+ {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1
+ {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH1
+ {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH2
+// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM15)}, // TIM15_CH1N
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
+ {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLDOWN, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/PinNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,188 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+ PF_4 = 0x54,
+ PF_5 = 0x55,
+ PF_6 = 0x56,
+ PF_7 = 0x57,
+
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PC_7,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/PortNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortF = 5
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/device.h Mon Feb 09 09:30:07 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/objects.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/PeripheralNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,77 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE,
+ UART_4 = (int)USART4_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_14 = (int)TIM14_BASE,
+ PWM_15 = (int)TIM15_BASE,
+ PWM_16 = (int)TIM16_BASE,
+ PWM_17 = (int)TIM17_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/PeripheralPins.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,184 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
+ {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
+ {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM1 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_1, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15)}, // TIM15_CH1N
+ {PA_2, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH1
+ {PA_3, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH2
+ {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
+// {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
+ {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16)}, // TIM16_CH1
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
+// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
+// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
+ {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17)}, // TIM17_CH1
+// {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1
+// {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2
+// {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3
+// {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH4
+
+ {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH3
+// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
+ {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14)}, // TIM14_CH1
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH4
+// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1N
+ {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1N
+ {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1
+ {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1
+// {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH1
+// {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
+ {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH2
+// {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
+// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15)}, // TIM15_CH1N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH2
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
+ {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Warning: SWCLK is also on this pin
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
+ {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
+ {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+// {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
+ {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
+ {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
+ {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
+ {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+// {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
+ {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/PinNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,183 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/PortNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortF = 5
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/device.h Mon Feb 09 09:30:07 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/objects.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PeripheralNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ DAC_1 = (int)DAC_BASE
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE,
+ UART_4 = (int)USART4_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_14 = (int)TIM14_BASE,
+ PWM_15 = (int)TIM15_BASE,
+ PWM_16 = (int)TIM16_BASE,
+ PWM_17 = (int)TIM17_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PeripheralPins.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,198 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+//*** DAC ***
+
+const PinMap PinMap_DAC[] = {
+ {PA_4, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT1
+ {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT2 (Warning: LED1 is also on this pin)
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
+ {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
+ {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM2 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+// {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
+ {PA_1, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15)}, // TIM15_CH1N
+ {PA_2, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH1
+// {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
+ {PA_3, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH2
+// {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
+ {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
+// {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
+ {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16)}, // TIM16_CH1
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
+// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
+// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
+ {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17)}, // TIM17_CH1
+ {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH4
+
+ {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH3
+// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
+ {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14)}, // TIM14_CH1
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH4
+// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
+// {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1N
+ {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1N
+ {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1
+ {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1
+// {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
+// {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
+ {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH1
+// {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
+ {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH2
+// {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
+// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15)}, // TIM15_CH1N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH2
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
+ {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Warning: SWCLK is also on this pin
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
+ {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
+ {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+ {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
+// {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
+ {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
+ {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
+ {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+ {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
+// {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PinNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,183 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PortNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortF = 5
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/device.h Mon Feb 09 09:30:07 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/objects.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,109 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/PeripheralNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,86 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ DAC_1 = (int)DAC_BASE
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE,
+ UART_4 = (int)USART4_BASE,
+ UART_5 = (int)USART5_BASE,
+ UART_6 = (int)USART6_BASE,
+ UART_7 = (int)USART7_BASE,
+ UART_8 = (int)USART8_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_14 = (int)TIM14_BASE,
+ PWM_15 = (int)TIM15_BASE,
+ PWM_16 = (int)TIM16_BASE,
+ PWM_17 = (int)TIM17_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/PeripheralPins.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,220 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+//*** DAC ***
+
+const PinMap PinMap_DAC[] = {
+ {PA_4, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT1
+ {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT2 (Warning: LED1 is also on this pin)
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PA_12, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
+ {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
+// {PF_0, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // OSC_IN
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PA_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
+ {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
+// {PF_1, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // OSC_OUT
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM2 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+// {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
+ {PA_1, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15)}, // TIM15_CH1N
+ {PA_2, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH1
+// {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
+ {PA_3, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH2
+// {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
+ {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
+// {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
+ {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16)}, // TIM16_CH1
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
+// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
+// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
+ {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17)}, // TIM17_CH1
+ {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH4
+
+ {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH3
+// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
+ {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14)}, // TIM14_CH1
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH4
+// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
+// {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1N
+ {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1N
+ {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1
+ {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1
+// {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
+// {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
+ {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH1
+// {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
+ {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH2
+// {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
+// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15)}, // TIM15_CH1N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH2
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PA_4, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART6)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
+ {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Warning: SWCLK is also on this pin
+ {PB_3, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
+ {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
+// {PC_0, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
+ {PC_0, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART6)},
+ {PC_2, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART8)},
+ {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+ {PC_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
+ {PC_8, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART8)},
+ {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
+// {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+ {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART5)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PA_5, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART6)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
+ {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
+ {PB_4, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
+ {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
+// {PC_1, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
+ {PC_1, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART6)},
+ {PC_3, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART8)},
+ {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+ {PC_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
+ {PC_9, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART8)},
+ {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
+// {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
+ {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART5)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/PinNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,184 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+ PF_11 = 0x5B,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_4,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/PortNames.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortF = 5
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/device.h Mon Feb 09 09:30:07 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/objects.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,109 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/analogin_api.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,179 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "mbed_assert.h"
+#include "analogin_api.h"
+
+#if DEVICE_ANALOGIN
+
+#include "wait_api.h"
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+
+ADC_HandleTypeDef AdcHandle;
+
+int adc_inited = 0;
+
+void analogin_init(analogin_t *obj, PinName pin)
+{
+ // Get the peripheral name from the pin and assign it to the object
+ obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
+ MBED_ASSERT(obj->adc != (ADCName)NC);
+
+ // Configure GPIO
+ pinmap_pinout(pin, PinMap_ADC);
+
+ // Save pin number for the read function
+ obj->pin = pin;
+
+ // The ADC initialization is done once
+ if (adc_inited == 0) {
+ adc_inited = 1;
+
+ // Enable ADC clock
+ __ADC1_CLK_ENABLE();
+
+ // Configure ADC
+ AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+ AdcHandle.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
+ AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
+ AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+ AdcHandle.Init.ScanConvMode = DISABLE;
+ AdcHandle.Init.EOCSelection = EOC_SINGLE_CONV;
+ AdcHandle.Init.LowPowerAutoWait = DISABLE;
+ AdcHandle.Init.LowPowerAutoPowerOff = DISABLE;
+ AdcHandle.Init.ContinuousConvMode = DISABLE;
+ AdcHandle.Init.DiscontinuousConvMode = DISABLE;
+ AdcHandle.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+ AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+ AdcHandle.Init.DMAContinuousRequests = DISABLE;
+ AdcHandle.Init.Overrun = OVR_DATA_OVERWRITTEN;
+ HAL_ADC_Init(&AdcHandle);
+
+ // Run the ADC calibration
+ HAL_ADCEx_Calibration_Start(&AdcHandle);
+ }
+}
+
+static inline uint16_t adc_read(analogin_t *obj)
+{
+ ADC_ChannelConfTypeDef sConfig;
+
+ AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+
+ // Configure ADC channel
+ sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
+#if defined (TARGET_STM32F091RC)
+ sConfig.SamplingTime = ADC_SAMPLETIME_13CYCLES_5;
+#else
+ sConfig.SamplingTime = ADC_SAMPLETIME_7CYCLES_5;
+#endif
+
+ switch (obj->pin) {
+ case PA_0:
+ sConfig.Channel = ADC_CHANNEL_0;
+ break;
+ case PA_1:
+ sConfig.Channel = ADC_CHANNEL_1;
+ break;
+ case PA_2:
+ sConfig.Channel = ADC_CHANNEL_2;
+ break;
+ case PA_3:
+ sConfig.Channel = ADC_CHANNEL_3;
+ break;
+ case PA_4:
+ sConfig.Channel = ADC_CHANNEL_4;
+ break;
+ case PA_5:
+ sConfig.Channel = ADC_CHANNEL_5;
+ break;
+ case PA_6:
+ sConfig.Channel = ADC_CHANNEL_6;
+ break;
+ case PA_7:
+ sConfig.Channel = ADC_CHANNEL_7;
+ break;
+ case PB_0:
+ sConfig.Channel = ADC_CHANNEL_8;
+ break;
+ case PB_1:
+ sConfig.Channel = ADC_CHANNEL_9;
+ break;
+ case PC_0:
+ sConfig.Channel = ADC_CHANNEL_10;
+ break;
+ case PC_1:
+ sConfig.Channel = ADC_CHANNEL_11;
+ break;
+ case PC_2:
+ sConfig.Channel = ADC_CHANNEL_12;
+ break;
+ case PC_3:
+ sConfig.Channel = ADC_CHANNEL_13;
+ break;
+ case PC_4:
+ sConfig.Channel = ADC_CHANNEL_14;
+ break;
+ case PC_5:
+ sConfig.Channel = ADC_CHANNEL_15;
+ break;
+ default:
+ return 0;
+ }
+
+ // Clear all channels as it is not done in HAL_ADC_ConfigChannel()
+ AdcHandle.Instance->CHSELR = 0;
+
+ HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
+
+ HAL_ADC_Start(&AdcHandle); // Start conversion
+
+ // Wait end of conversion and get value
+ if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
+ return (HAL_ADC_GetValue(&AdcHandle));
+ } else {
+ return 0;
+ }
+}
+
+uint16_t analogin_read_u16(analogin_t *obj)
+{
+ uint16_t value = adc_read(obj);
+ // 12-bit to 16-bit conversion
+ value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
+ return value;
+}
+
+float analogin_read(analogin_t *obj)
+{
+ uint16_t value = adc_read(obj);
+ return (float)value * (1.0f / (float)0xFFF); // 12 bits range
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/analogout_api.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,136 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "mbed_assert.h"
+#include "analogout_api.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "PeripheralPins.h"
+
+#define DAC_RANGE (0xFFF) // 12 bits
+
+static DAC_HandleTypeDef DacHandle;
+
+void analogout_init(dac_t *obj, PinName pin)
+{
+ DAC_ChannelConfTypeDef sConfig;
+
+ DacHandle.Instance = DAC;
+
+ // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
+ obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
+ MBED_ASSERT(obj->dac != (DACName)NC);
+
+ // Configure GPIO
+ pinmap_pinout(pin, PinMap_DAC);
+
+ // Save the channel for future use
+ obj->pin = pin;
+
+ // Enable DAC clock
+ __DAC1_CLK_ENABLE();
+
+ // Configure DAC
+ sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
+ sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
+
+ if (pin == PA_4) {
+ HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
+ } else { // PA_5
+ HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_2);
+ }
+
+ analogout_write_u16(obj, 0);
+}
+
+void analogout_free(dac_t *obj)
+{
+ // Reset DAC and disable clock
+ __DAC1_FORCE_RESET();
+ __DAC1_RELEASE_RESET();
+ __DAC1_CLK_DISABLE();
+
+ // Configure GPIO
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+}
+
+static inline void dac_write(dac_t *obj, uint16_t value)
+{
+ if (obj->pin == PA_4) {
+ HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
+ HAL_DAC_Start(&DacHandle, DAC_CHANNEL_1);
+ } else { // PA_5
+ HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
+ HAL_DAC_Start(&DacHandle, DAC_CHANNEL_2);
+ }
+}
+
+static inline int dac_read(dac_t *obj)
+{
+ if (obj->pin == PA_4) {
+ return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
+ } else { // PA_5
+ return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
+ }
+}
+
+void analogout_write(dac_t *obj, float value)
+{
+ if (value < 0.0f) {
+ dac_write(obj, 0); // Min value
+ } else if (value > 1.0f) {
+ dac_write(obj, (uint16_t)DAC_RANGE); // Max value
+ } else {
+ dac_write(obj, (uint16_t)(value * (float)DAC_RANGE));
+ }
+}
+
+void analogout_write_u16(dac_t *obj, uint16_t value)
+{
+ if (value > (uint16_t)DAC_RANGE) {
+ dac_write(obj, (uint16_t)DAC_RANGE); // Max value
+ } else {
+ dac_write(obj, value);
+ }
+}
+
+float analogout_read(dac_t *obj)
+{
+ uint32_t value = dac_read(obj);
+ return (float)((float)value * (1.0f / (float)DAC_RANGE));
+}
+
+uint16_t analogout_read_u16(dac_t *obj)
+{
+ return (uint16_t)dac_read(obj);
+}
+
+#endif // DEVICE_ANALOGOUT
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/gpio_api.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,79 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "gpio_api.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+uint32_t gpio_set(PinName pin)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+
+ pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+
+ return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
+}
+
+void gpio_init(gpio_t *obj, PinName pin)
+{
+ obj->pin = pin;
+ if (pin == (PinName)NC) {
+ return;
+ }
+
+ uint32_t port_index = STM_PORT(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Fill GPIO object structure for future use
+ obj->mask = gpio_set(pin);
+ obj->reg_in = &gpio->IDR;
+ obj->reg_set = &gpio->BSRR;
+ obj->reg_clr = &gpio->BRR;
+}
+
+void gpio_mode(gpio_t *obj, PinMode mode)
+{
+ pin_mode(obj->pin, mode);
+}
+
+void gpio_dir(gpio_t *obj, PinDirection direction)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (direction == PIN_OUTPUT) {
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
+ } else { // PIN_INPUT
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/gpio_irq_api.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,267 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include <stddef.h>
+#include "cmsis.h"
+#include "gpio_irq_api.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+#define EDGE_NONE (0)
+#define EDGE_RISE (1)
+#define EDGE_FALL (2)
+#define EDGE_BOTH (3)
+
+// Number of EXTI irq vectors (EXTI0_1, EXTI2_3, EXTI4_15)
+#define CHANNEL_NUM (3)
+
+// Max pins for one line (max with EXTI4_15)
+#define MAX_PIN_LINE (12)
+
+typedef struct gpio_channel {
+ uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
+ uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
+ uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
+ uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
+} gpio_channel_t;
+
+static gpio_channel_t channels[CHANNEL_NUM] = {
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0}
+};
+
+// Used to return the index for channels array.
+static uint32_t pin_base_nr[16] = {
+ // EXTI0_1
+ 0, // pin 0
+ 1, // pin 1
+ // EXTI2_3
+ 0, // pin 2
+ 1, // pin 3
+ // EXTI4_15
+ 0, // pin 4
+ 1, // pin 5
+ 2, // pin 6
+ 3, // pin 7
+ 4, // pin 8
+ 5, // pin 9
+ 6, // pin 10
+ 7, // pin 11
+ 8, // pin 12
+ 9, // pin 13
+ 10, // pin 14
+ 11 // pin 15
+};
+
+static gpio_irq_handler irq_handler;
+
+static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
+{
+ gpio_channel_t *gpio_channel = &channels[irq_index];
+ uint32_t gpio_idx;
+
+ for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
+ uint32_t current_mask = (1 << gpio_idx);
+
+ if (gpio_channel->pin_mask & current_mask) {
+ // Retrieve the gpio and pin that generate the irq
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
+ uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
+
+ // Clear interrupt flag
+ if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
+ __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
+
+ if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
+
+ // Check which edge has generated the irq
+ if ((gpio->IDR & pin) == 0) {
+ irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
+ } else {
+ irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
+ }
+ }
+ }
+ }
+}
+
+// EXTI lines 0 to 1
+static void gpio_irq0(void)
+{
+ handle_interrupt_in(0, 2);
+}
+
+// EXTI lines 2 to 3
+static void gpio_irq1(void)
+{
+ handle_interrupt_in(1, 2);
+}
+
+// EXTI lines 4 to 15
+static void gpio_irq2(void)
+{
+ handle_interrupt_in(2, 12);
+}
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
+{
+ IRQn_Type irq_n = (IRQn_Type)0;
+ uint32_t vector = 0;
+ uint32_t irq_index;
+ gpio_channel_t *gpio_channel;
+ uint32_t gpio_idx;
+
+ if (pin == NC) return -1;
+
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Select irq number and interrupt routine
+ if ((pin_index == 0) || (pin_index == 1)) {
+ irq_n = EXTI0_1_IRQn;
+ vector = (uint32_t)&gpio_irq0;
+ irq_index = 0;
+ } else if ((pin_index == 2) || (pin_index == 3)) {
+ irq_n = EXTI2_3_IRQn;
+ vector = (uint32_t)&gpio_irq1;
+ irq_index = 1;
+ } else if ((pin_index > 3) && (pin_index < 16)) {
+ irq_n = EXTI4_15_IRQn;
+ vector = (uint32_t)&gpio_irq2;
+ irq_index = 2;
+ } else {
+ error("InterruptIn error: pin not supported.\n");
+ return -1;
+ }
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+
+ // Configure GPIO
+ pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
+
+ // Enable EXTI interrupt
+ NVIC_SetVector(irq_n, vector);
+ NVIC_EnableIRQ(irq_n);
+
+ // Save informations for future use
+ obj->irq_n = irq_n;
+ obj->irq_index = irq_index;
+ obj->event = EDGE_NONE;
+ obj->pin = pin;
+
+ gpio_channel = &channels[irq_index];
+ gpio_idx = pin_base_nr[pin_index];
+ gpio_channel->pin_mask |= (1 << gpio_idx);
+ gpio_channel->channel_ids[gpio_idx] = id;
+ gpio_channel->channel_gpio[gpio_idx] = gpio_add;
+ gpio_channel->channel_pin[gpio_idx] = pin_index;
+
+ irq_handler = handler;
+
+ return 0;
+}
+
+void gpio_irq_free(gpio_irq_t *obj)
+{
+ gpio_channel_t *gpio_channel = &channels[obj->irq_index];
+ uint32_t pin_index = STM_PIN(obj->pin);
+ uint32_t gpio_idx = pin_base_nr[pin_index];
+
+ gpio_channel->pin_mask &= ~(1 << gpio_idx);
+ gpio_channel->channel_ids[gpio_idx] = 0;
+ gpio_channel->channel_gpio[gpio_idx] = 0;
+ gpio_channel->channel_pin[gpio_idx] = 0;
+
+ // Disable EXTI line
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ obj->event = EDGE_NONE;
+}
+
+void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
+{
+ uint32_t mode = STM_MODE_IT_EVT_RESET;
+ uint32_t pull = GPIO_NOPULL;
+
+ if (enable) {
+ if (event == IRQ_RISE) {
+ if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING_FALLING;
+ obj->event = EDGE_BOTH;
+ } else { // NONE or RISE
+ mode = STM_MODE_IT_RISING;
+ obj->event = EDGE_RISE;
+ }
+ }
+ if (event == IRQ_FALL) {
+ if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING_FALLING;
+ obj->event = EDGE_BOTH;
+ } else { // NONE or FALL
+ mode = STM_MODE_IT_FALLING;
+ obj->event = EDGE_FALL;
+ }
+ }
+ } else { // Disable
+ if (event == IRQ_RISE) {
+ if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_FALLING;
+ obj->event = EDGE_FALL;
+ } else { // NONE or RISE
+ mode = STM_MODE_IT_EVT_RESET;
+ obj->event = EDGE_NONE;
+ }
+ }
+ if (event == IRQ_FALL) {
+ if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING;
+ obj->event = EDGE_RISE;
+ } else { // NONE or FALL
+ mode = STM_MODE_IT_EVT_RESET;
+ obj->event = EDGE_NONE;
+ }
+ }
+ }
+
+ pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
+}
+
+void gpio_irq_enable(gpio_irq_t *obj)
+{
+ NVIC_EnableIRQ(obj->irq_n);
+}
+
+void gpio_irq_disable(gpio_irq_t *obj)
+{
+ NVIC_DisableIRQ(obj->irq_n);
+ obj->event = EDGE_NONE;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/gpio_object.h Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_set;
+ __IO uint32_t *reg_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/i2c_api.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,390 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "i2c_api.h"
+
+#if DEVICE_I2C
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+
+/* Timeout values for flags and events waiting loops. These timeouts are
+ not based on accurate values, they just guarantee that the application will
+ not remain stuck if the I2C communication is corrupted. */
+#define FLAG_TIMEOUT ((int)0x1000)
+#define LONG_TIMEOUT ((int)0x8000)
+
+I2C_HandleTypeDef I2cHandle;
+
+int i2c1_inited = 0;
+int i2c2_inited = 0;
+
+void i2c_init(i2c_t *obj, PinName sda, PinName scl)
+{
+ // Determine the I2C to use
+ I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
+ I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
+
+ obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
+ MBED_ASSERT(obj->i2c != (I2CName)NC);
+
+ // Enable I2C1 clock and pinout if not done
+ if ((obj->i2c == I2C_1) && !i2c1_inited) {
+ i2c1_inited = 1;
+ __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_SYSCLK);
+ __I2C1_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+
+ // Enable I2C2 clock and pinout if not done
+ if ((obj->i2c == I2C_2) && !i2c2_inited) {
+ i2c2_inited = 1;
+ __I2C2_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+
+ // Reset to clear pending flags if any
+ i2c_reset(obj);
+
+ // I2C configuration
+ i2c_frequency(obj, 100000); // 100 kHz per default
+}
+
+void i2c_frequency(i2c_t *obj, int hz)
+{
+ MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ // wait before init
+ timeout = LONG_TIMEOUT;
+ while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
+
+ // Common settings: I2C clock = 48 MHz, Analog filter = ON, Digital filter coefficient = 0
+ switch (hz) {
+ case 100000:
+ I2cHandle.Init.Timing = 0x10805E89; // Standard mode with Rise Time = 400ns and Fall Time = 100ns
+ break;
+ case 400000:
+ I2cHandle.Init.Timing = 0x00901850; // Fast mode with Rise Time = 250ns and Fall Time = 100ns
+ break;
+ case 1000000:
+ I2cHandle.Init.Timing = 0x00700818; // Fast mode Plus with Rise Time = 60ns and Fall Time = 100ns
+ break;
+ default:
+ break;
+ }
+
+ // I2C configuration
+ I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
+ I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
+ I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
+ I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
+ I2cHandle.Init.OwnAddress1 = 0;
+ I2cHandle.Init.OwnAddress2 = 0;
+ I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
+ HAL_I2C_Init(&I2cHandle);
+}
+
+inline int i2c_start(i2c_t *obj)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+ // Clear Acknowledge failure flag
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
+
+ // Generate the START condition
+ i2c->CR2 |= I2C_CR2_START;
+
+ // Wait the START condition has been correctly sent
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
+ if ((timeout--) == 0) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+inline int i2c_stop(i2c_t *obj)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+
+ // Generate the STOP condition
+ i2c->CR2 |= I2C_CR2_STOP;
+
+ return 0;
+}
+
+int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+ int count;
+ int value;
+
+ // Update CR2 register
+ i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
+ | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
+
+ // Read all bytes
+ for (count = 0; count < length; count++) {
+ value = i2c_byte_read(obj, 0);
+ data[count] = (char)value;
+ }
+
+ // Wait transfer complete
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
+
+ // If not repeated start, send stop.
+ if (stop) {
+ i2c_stop(obj);
+ // Wait until STOPF flag is set
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+ // Clear STOP Flag
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
+ }
+
+ return length;
+}
+
+int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+ int count;
+
+ // Update CR2 register
+ i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
+ | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
+
+ for (count = 0; count < length; count++) {
+ i2c_byte_write(obj, data[count]);
+ }
+
+ // Wait transfer complete
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
+
+ // If not repeated start, send stop
+ if (stop) {
+ i2c_stop(obj);
+ // Wait until STOPF flag is set
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+ // Clear STOP Flag
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
+ }
+
+ return count;
+}
+
+int i2c_byte_read(i2c_t *obj, int last)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ // Wait until the byte is received
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
+ if ((timeout--) == 0) {
+ return -1;
+ }
+ }
+
+ return (int)i2c->RXDR;
+}
+
+int i2c_byte_write(i2c_t *obj, int data)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ // Wait until the previous byte is transmitted
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
+ if ((timeout--) == 0) {
+ return 0;
+ }
+ }
+
+ i2c->TXDR = (uint8_t)data;
+
+ return 1;
+}
+
+void i2c_reset(i2c_t *obj)
+{
+ int timeout;
+
+ // Wait before reset
+ timeout = LONG_TIMEOUT;
+ while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
+
+ if (obj->i2c == I2C_1) {
+ __I2C1_FORCE_RESET();
+ __I2C1_RELEASE_RESET();
+ }
+ if (obj->i2c == I2C_2) {
+ __I2C2_FORCE_RESET();
+ __I2C2_RELEASE_RESET();
+ }
+}
+
+#if DEVICE_I2CSLAVE
+
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ uint16_t tmpreg = 0;
+
+ // disable
+ i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
+ // Get the old register value
+ tmpreg = i2c->OAR1;
+ // Reset address bits
+ tmpreg &= 0xFC00;
+ // Set new address
+ tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
+ // Store the new register value
+ i2c->OAR1 = tmpreg;
+ // enable
+ i2c->OAR1 |= I2C_OAR1_OA1EN;
+}
+
+void i2c_slave_mode(i2c_t *obj, int enable_slave)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ uint16_t tmpreg;
+
+ // Get the old register value
+ tmpreg = i2c->OAR1;
+
+ // Enable / disable slave
+ if (enable_slave == 1) {
+ tmpreg |= I2C_OAR1_OA1EN;
+ } else {
+ tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
+ }
+
+ // Set new mode
+ i2c->OAR1 = tmpreg;
+}
+
+// See I2CSlave.h
+#define NoData 0 // the slave has not been addressed
+#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
+#define WriteGeneral 2 // the master is writing to all slave
+#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
+
+int i2c_slave_receive(i2c_t *obj)
+{
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int retValue = NoData;
+
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
+ retValue = ReadAddressed;
+ else
+ retValue = WriteAddressed;
+
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
+ }
+ }
+
+ return (retValue);
+}
+
+int i2c_slave_read(i2c_t *obj, char *data, int length)
+{
+ char size = 0;
+
+ while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
+
+ return size;
+}
+
+int i2c_slave_write(i2c_t *obj, const char *data, int length)
+{
+ char size = 0;
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+ do {
+ i2c_byte_write(obj, data[size]);
+ size++;
+ } while (size < length);
+
+ return size;
+}
+
+
+#endif // DEVICE_I2CSLAVE
+
+#endif // DEVICE_I2C
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/mbed_overrides.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,40 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "cmsis.h"
+
+// This function is called after RAM initialization and before main.
+void mbed_sdk_init()
+{
+ // Update the SystemCoreClock variable.
+ SystemCoreClockUpdate();
+
+#if defined(TARGET_STM32F070RB) || defined(TARGET_STM32F072RB) || defined(TARGET_STM32F091RC)
+ // Need to restart HAL driver after the RAM is initialized
+ HAL_Init();
+#endif
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/pinmap.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,139 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "pinmap.h"
+#include "PortNames.h"
+#include "mbed_error.h"
+
+// GPIO mode look-up table
+static const uint32_t gpio_mode[13] = {
+ 0x00000000, // 0 = GPIO_MODE_INPUT
+ 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
+ 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
+ 0x00000002, // 3 = GPIO_MODE_AF_PP
+ 0x00000012, // 4 = GPIO_MODE_AF_OD
+ 0x00000003, // 5 = GPIO_MODE_ANALOG
+ 0x10110000, // 6 = GPIO_MODE_IT_RISING
+ 0x10210000, // 7 = GPIO_MODE_IT_FALLING
+ 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
+ 0x10120000, // 9 = GPIO_MODE_EVT_RISING
+ 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
+ 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
+ 0x10000000 // 12 = Reset IT and EVT (not in STM32Cube HAL)
+};
+
+// Enable GPIO clock and return GPIO base address
+uint32_t Set_GPIO_Clock(uint32_t port_idx)
+{
+ uint32_t gpio_add = 0;
+ switch (port_idx) {
+ case PortA:
+ gpio_add = GPIOA_BASE;
+ __GPIOA_CLK_ENABLE();
+ break;
+ case PortB:
+ gpio_add = GPIOB_BASE;
+ __GPIOB_CLK_ENABLE();
+ break;
+ case PortC:
+ gpio_add = GPIOC_BASE;
+ __GPIOC_CLK_ENABLE();
+ break;
+ case PortD:
+ gpio_add = GPIOD_BASE;
+ __GPIOD_CLK_ENABLE();
+ break;
+ case PortF:
+ gpio_add = GPIOF_BASE;
+ __GPIOF_CLK_ENABLE();
+ break;
+ default:
+ error("Pinmap error: wrong port number.");
+ break;
+ }
+ return gpio_add;
+}
+
+/**
+ * Configure pin (mode, speed, output type and pull-up/pull-down)
+ */
+void pin_function(PinName pin, int data)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+
+ // Get the pin informations
+ uint32_t mode = STM_PIN_MODE(data);
+ uint32_t pupd = STM_PIN_PUPD(data);
+ uint32_t afnum = STM_PIN_AFNUM(data);
+
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Configure GPIO
+ GPIO_InitTypeDef GPIO_InitStructure;
+ GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
+ GPIO_InitStructure.Mode = gpio_mode[mode];
+ GPIO_InitStructure.Pull = pupd;
+ GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
+ GPIO_InitStructure.Alternate = afnum;
+ HAL_GPIO_Init(gpio, &GPIO_InitStructure);
+
+ // [TODO] Disconnect SWDIO and SWCLK signals ?
+ // Warning: For debugging it is necessary to reconnect under reset if this is done.
+ //if ((pin == PA_13) || (pin == PA_14)) {
+ //
+ //}
+}
+
+/**
+ * Configure pin pull-up/pull-down
+ */
+void pin_mode(PinName pin, PinMode mode)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Configure pull-up/pull-down resistors
+ uint32_t pupd = (uint32_t)mode;
+ if (pupd > 2) pupd = 0; // Open-drain = No pull-up/No pull-down
+ gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
+ gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
+
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/port_api.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "port_api.h"
+#include "pinmap.h"
+#include "gpio_api.h"
+#include "mbed_error.h"
+
+#if DEVICE_PORTIN || DEVICE_PORTOUT
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
+// low nibble = pin number
+PinName port_pin(PortName port, int pin_n)
+{
+ return (PinName)(pin_n + (port << 4));
+}
+
+void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
+{
+ uint32_t port_index = (uint32_t)port;
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Fill PORT object structure for future use
+ obj->port = port;
+ obj->mask = mask;
+ obj->direction = dir;
+ obj->reg_in = &gpio->IDR;
+ obj->reg_out = &gpio->ODR;
+
+ port_dir(obj, dir);
+}
+
+void port_dir(port_t *obj, PinDirection dir)
+{
+ uint32_t i;
+ obj->direction = dir;
+ for (i = 0; i < 16; i++) { // Process all pins
+ if (obj->mask & (1 << i)) { // If the pin is used
+ if (dir == PIN_OUTPUT) {
+ pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
+ } else { // PIN_INPUT
+ pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ }
+ }
+ }
+}
+
+void port_mode(port_t *obj, PinMode mode)
+{
+ uint32_t i;
+ for (i = 0; i < 16; i++) { // Process all pins
+ if (obj->mask & (1 << i)) { // If the pin is used
+ pin_mode(port_pin(obj->port, i), mode);
+ }
+ }
+}
+
+void port_write(port_t *obj, int value)
+{
+ *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
+}
+
+int port_read(port_t *obj)
+{
+ if (obj->direction == PIN_OUTPUT) {
+ return (*obj->reg_out & obj->mask);
+ } else { // PIN_INPUT
+ return (*obj->reg_in & obj->mask);
+ }
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/pwmout_api.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,262 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "pwmout_api.h"
+
+#if DEVICE_PWMOUT
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "PeripheralPins.h"
+
+static TIM_HandleTypeDef TimHandle;
+
+void pwmout_init(pwmout_t* obj, PinName pin)
+{
+ // Get the peripheral name from the pin and assign it to the object
+ obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
+
+ if (obj->pwm == (PWMName)NC) {
+ error("PWM error: pinout mapping failed.");
+ }
+
+ // Enable TIM clock
+#if defined(TIM1_BASE)
+ if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
+#endif
+#if defined(TIM2_BASE)
+ if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
+#endif
+ if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
+ if (obj->pwm == PWM_14) __TIM14_CLK_ENABLE();
+ if (obj->pwm == PWM_15) __TIM15_CLK_ENABLE();
+ if (obj->pwm == PWM_16) __TIM16_CLK_ENABLE();
+ if (obj->pwm == PWM_17) __TIM17_CLK_ENABLE();
+
+ // Configure GPIO
+ pinmap_pinout(pin, PinMap_PWM);
+
+ obj->pin = pin;
+ obj->period = 0;
+ obj->pulse = 0;
+
+ pwmout_period_us(obj, 20000); // 20 ms per default
+}
+
+void pwmout_free(pwmout_t* obj)
+{
+ // Configure GPIO
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+}
+
+void pwmout_write(pwmout_t* obj, float value)
+{
+ TIM_OC_InitTypeDef sConfig;
+ int channel = 0;
+ int complementary_channel = 0;
+
+ TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
+
+ if (value < (float)0.0) {
+ value = 0.0;
+ } else if (value > (float)1.0) {
+ value = 1.0;
+ }
+
+ obj->pulse = (uint32_t)((float)obj->period * value);
+
+ // Configure channels
+ sConfig.OCMode = TIM_OCMODE_PWM1;
+ sConfig.Pulse = obj->pulse;
+ sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
+ sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ sConfig.OCFastMode = TIM_OCFAST_DISABLE;
+ sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
+ sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+
+#if defined (TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
+ switch (obj->pin) {
+ // Channels 1
+ case PA_4:
+ case PA_6:
+ case PB_1:
+ case PB_4:
+ case PB_8:
+ case PB_9:
+ case PB_14:
+ case PC_6:
+ channel = TIM_CHANNEL_1;
+ break;
+ // Channels 1N
+ case PB_6:
+ case PB_7:
+ channel = TIM_CHANNEL_1;
+ complementary_channel = 1;
+ break;
+ // Channels 2
+ case PA_7:
+ case PB_5:
+ case PB_15:
+ case PC_7:
+ channel = TIM_CHANNEL_2;
+ break;
+ // Channels 3
+ case PB_0:
+ case PC_8:
+ channel = TIM_CHANNEL_3;
+ break;
+ // Channels 4
+ case PC_9:
+ channel = TIM_CHANNEL_4;
+ break;
+ default:
+ return;
+ }
+
+#else
+ switch (obj->pin) {
+ // Channels 1
+ case PA_2:
+ case PA_4:
+ case PA_6:
+ case PA_7:
+ case PA_8:
+ case PB_1:
+ case PB_4:
+ case PB_8:
+ case PB_9:
+ case PB_14:
+ case PC_6:
+ channel = TIM_CHANNEL_1;
+ break;
+ // Channels 1N
+ case PA_1:
+ case PB_6:
+ case PB_7:
+ case PB_13:
+ channel = TIM_CHANNEL_1;
+ complementary_channel = 1;
+ break;
+ // Channels 2
+ case PA_3:
+ case PA_9:
+ case PB_5:
+ case PB_15:
+ case PC_7:
+ channel = TIM_CHANNEL_2;
+ break;
+ // Channels 3
+ case PA_10:
+ case PB_0:
+ case PC_8:
+ channel = TIM_CHANNEL_3;
+ break;
+ // Channels 4
+ case PA_11:
+ case PC_9:
+ channel = TIM_CHANNEL_4;
+ break;
+ default:
+ return;
+ }
+
+#endif
+
+ HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
+
+ if (complementary_channel) {
+ HAL_TIMEx_PWMN_Start(&TimHandle, channel);
+ } else {
+ HAL_TIM_PWM_Start(&TimHandle, channel);
+ }
+}
+
+float pwmout_read(pwmout_t* obj)
+{
+ float value = 0;
+ if (obj->period > 0) {
+ value = (float)(obj->pulse) / (float)(obj->period);
+ }
+ return ((value > (float)1.0) ? (float)(1.0) : (value));
+}
+
+void pwmout_period(pwmout_t* obj, float seconds)
+{
+ pwmout_period_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_period_ms(pwmout_t* obj, int ms)
+{
+ pwmout_period_us(obj, ms * 1000);
+}
+
+void pwmout_period_us(pwmout_t* obj, int us)
+{
+ TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
+
+ float dc = pwmout_read(obj);
+
+ __HAL_TIM_DISABLE(&TimHandle);
+
+ // Update the SystemCoreClock variable
+ SystemCoreClockUpdate();
+
+ TimHandle.Init.Period = us - 1;
+ TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
+ TimHandle.Init.ClockDivision = 0;
+ TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+ HAL_TIM_PWM_Init(&TimHandle);
+
+ // Set duty cycle again
+ pwmout_write(obj, dc);
+
+ // Save for future use
+ obj->period = us;
+
+ __HAL_TIM_ENABLE(&TimHandle);
+}
+
+void pwmout_pulsewidth(pwmout_t* obj, float seconds)
+{
+ pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
+{
+ pwmout_pulsewidth_us(obj, ms * 1000);
+}
+
+void pwmout_pulsewidth_us(pwmout_t* obj, int us)
+{
+ float value = (float)us / (float)obj->period;
+ pwmout_write(obj, value);
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/rtc_api.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,201 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "rtc_api.h"
+
+#if DEVICE_RTC
+
+#include "mbed_error.h"
+
+static int rtc_inited = 0;
+
+static RTC_HandleTypeDef RtcHandle;
+
+void rtc_init(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ uint32_t rtc_freq = 0;
+
+ if (rtc_inited) return;
+ rtc_inited = 1;
+
+ RtcHandle.Instance = RTC;
+
+ // Enable Power clock
+ __PWR_CLK_ENABLE();
+
+ // Enable access to Backup domain
+ HAL_PWR_EnableBkUpAccess();
+
+ // Reset Backup domain
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ // Enable LSE Oscillator
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
+ RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
+ // Connect LSE to RTC
+ __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
+ rtc_freq = LSE_VALUE;
+ } else {
+ // Enable LSI clock
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
+ RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+ RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ error("RTC error: LSI clock initialization failed.");
+ }
+ // Connect LSI to RTC
+ __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
+ // This value is LSI typical value. To be measured precisely using a timer input capture for example.
+ rtc_freq = LSI_VALUE;
+ }
+
+ // Enable RTC
+ __HAL_RCC_RTC_ENABLE();
+
+ RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
+ RtcHandle.Init.AsynchPrediv = 127;
+ RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
+ RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
+ RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
+ RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
+
+ if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
+ error("RTC error: RTC initialization failed.");
+ }
+}
+
+void rtc_free(void)
+{
+ // Enable Power clock
+ __PWR_CLK_ENABLE();
+
+ // Enable access to Backup domain
+ HAL_PWR_EnableBkUpAccess();
+
+ // Reset Backup domain
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ // Disable access to Backup domain
+ HAL_PWR_DisableBkUpAccess();
+
+ // Disable LSI and LSE clocks
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+ RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
+ RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+ HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+ rtc_inited = 0;
+}
+
+int rtc_isenabled(void)
+{
+ return rtc_inited;
+}
+
+/*
+ RTC Registers
+ RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
+ RTC_Month 1=january, 2=february, ..., 12=december
+ RTC_Date day of the month 1-31
+ RTC_Year year 0-99
+ struct tm
+ tm_sec seconds after the minute 0-61
+ tm_min minutes after the hour 0-59
+ tm_hour hours since midnight 0-23
+ tm_mday day of the month 1-31
+ tm_mon months since January 0-11
+ tm_year years since 1900
+ tm_wday days since Sunday 0-6
+ tm_yday days since January 1 0-365
+ tm_isdst Daylight Saving Time flag
+*/
+time_t rtc_read(void)
+{
+ RTC_DateTypeDef dateStruct;
+ RTC_TimeTypeDef timeStruct;
+ struct tm timeinfo;
+
+ RtcHandle.Instance = RTC;
+
+ // Read actual date and time
+ // Warning: the time must be read first!
+ HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
+ HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
+
+ // Setup a tm structure based on the RTC
+ timeinfo.tm_wday = dateStruct.WeekDay;
+ timeinfo.tm_mon = dateStruct.Month - 1;
+ timeinfo.tm_mday = dateStruct.Date;
+ timeinfo.tm_year = dateStruct.Year + 100;
+ timeinfo.tm_hour = timeStruct.Hours;
+ timeinfo.tm_min = timeStruct.Minutes;
+ timeinfo.tm_sec = timeStruct.Seconds;
+
+ // Convert to timestamp
+ time_t t = mktime(&timeinfo);
+
+ return t;
+}
+
+void rtc_write(time_t t)
+{
+ RTC_DateTypeDef dateStruct;
+ RTC_TimeTypeDef timeStruct;
+
+ RtcHandle.Instance = RTC;
+
+ // Convert the time into a tm
+ struct tm *timeinfo = localtime(&t);
+
+ // Fill RTC structures
+ dateStruct.WeekDay = timeinfo->tm_wday;
+ dateStruct.Month = timeinfo->tm_mon + 1;
+ dateStruct.Date = timeinfo->tm_mday;
+ dateStruct.Year = timeinfo->tm_year - 100;
+ timeStruct.Hours = timeinfo->tm_hour;
+ timeStruct.Minutes = timeinfo->tm_min;
+ timeStruct.Seconds = timeinfo->tm_sec;
+ timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
+ timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
+ timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
+
+ // Change the RTC current date/time
+ HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
+ HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/serial_api.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,515 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "serial_api.h"
+
+#if DEVICE_SERIAL
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include <string.h>
+#include "PeripheralPins.h"
+
+#if defined (TARGET_STM32F091RC)
+#define UART_NUM (8)
+
+static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0, 0, 0, 0, 0};
+
+#elif defined (TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
+#define UART_NUM (2)
+
+static uint32_t serial_irq_ids[UART_NUM] = {0, 0};
+
+#else
+#define UART_NUM (4)
+
+static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0};
+
+#endif
+
+static uart_irq_handler irq_handler;
+
+UART_HandleTypeDef UartHandle;
+
+int stdio_uart_inited = 0;
+serial_t stdio_uart;
+
+static void init_uart(serial_t *obj)
+{
+ UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+
+ UartHandle.Init.BaudRate = obj->baudrate;
+ UartHandle.Init.WordLength = obj->databits;
+ UartHandle.Init.StopBits = obj->stopbits;
+ UartHandle.Init.Parity = obj->parity;
+ UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+
+ if (obj->pin_rx == NC) {
+ UartHandle.Init.Mode = UART_MODE_TX;
+ } else if (obj->pin_tx == NC) {
+ UartHandle.Init.Mode = UART_MODE_RX;
+ } else {
+ UartHandle.Init.Mode = UART_MODE_TX_RX;
+ }
+
+ // Disable the reception overrun detection
+ UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT;
+ UartHandle.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
+
+ HAL_UART_Init(&UartHandle);
+}
+
+void serial_init(serial_t *obj, PinName tx, PinName rx)
+{
+ // Determine the UART to use (UART_1, UART_2, ...)
+ UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
+ UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
+
+ // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
+ obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
+ MBED_ASSERT(obj->uart != (UARTName)NC);
+
+ // Enable USART clock
+ if (obj->uart == UART_1) {
+ __USART1_CLK_ENABLE();
+ obj->index = 0;
+ }
+
+ if (obj->uart == UART_2) {
+ __USART2_CLK_ENABLE();
+ obj->index = 1;
+ }
+
+#if defined USART3_BASE
+ if (obj->uart == UART_3) {
+ __USART3_CLK_ENABLE();
+ obj->index = 2;
+ }
+#endif
+
+#if defined USART4_BASE
+ if (obj->uart == UART_4) {
+ __USART4_CLK_ENABLE();
+ obj->index = 3;
+ }
+#endif
+
+#if defined USART5_BASE
+ if (obj->uart == UART_5) {
+ __USART5_CLK_ENABLE();
+ obj->index = 4;
+ }
+#endif
+
+#if defined USART6_BASE
+ if (obj->uart == UART_6) {
+ __USART6_CLK_ENABLE();
+ obj->index = 5;
+ }
+#endif
+
+#if defined USART7_BASE
+ if (obj->uart == UART_7) {
+ __USART7_CLK_ENABLE();
+ obj->index = 6;
+ }
+#endif
+
+#if defined USART8_BASE
+ if (obj->uart == UART_8) {
+ __USART8_CLK_ENABLE();
+ obj->index = 7;
+ }
+#endif
+
+ // Configure the UART pins
+ pinmap_pinout(tx, PinMap_UART_TX);
+ pinmap_pinout(rx, PinMap_UART_RX);
+ if (tx != NC) {
+ pin_mode(tx, PullUp);
+ }
+ if (rx != NC) {
+ pin_mode(rx, PullUp);
+ }
+
+ // Configure UART
+ obj->baudrate = 9600;
+ obj->databits = UART_WORDLENGTH_8B;
+ obj->stopbits = UART_STOPBITS_1;
+ obj->parity = UART_PARITY_NONE;
+
+ obj->pin_tx = tx;
+ obj->pin_rx = rx;
+
+ init_uart(obj);
+
+ // For stdio management
+ if (obj->uart == STDIO_UART) {
+ stdio_uart_inited = 1;
+ memcpy(&stdio_uart, obj, sizeof(serial_t));
+ }
+}
+
+void serial_free(serial_t *obj)
+{
+ // Reset UART and disable clock
+ if (obj->uart == UART_1) {
+ __USART1_FORCE_RESET();
+ __USART1_RELEASE_RESET();
+ __USART1_CLK_DISABLE();
+ }
+
+ if (obj->uart == UART_2) {
+ __USART2_FORCE_RESET();
+ __USART2_RELEASE_RESET();
+ __USART2_CLK_DISABLE();
+ }
+
+#if defined USART3_BASE
+ if (obj->uart == UART_3) {
+ __USART3_FORCE_RESET();
+ __USART3_RELEASE_RESET();
+ __USART3_CLK_DISABLE();
+ }
+#endif
+
+#if defined USART4_BASE
+ if (obj->uart == UART_4) {
+ __USART4_FORCE_RESET();
+ __USART4_RELEASE_RESET();
+ __USART4_CLK_DISABLE();
+ }
+#endif
+
+#if defined USART5_BASE
+ if (obj->uart == UART_5) {
+ __USART5_FORCE_RESET();
+ __USART5_RELEASE_RESET();
+ __USART5_CLK_DISABLE();
+ }
+#endif
+
+#if defined USART6_BASE
+ if (obj->uart == UART_6) {
+ __USART6_FORCE_RESET();
+ __USART6_RELEASE_RESET();
+ __USART6_CLK_DISABLE();
+ }
+#endif
+
+#if defined USART7_BASE
+ if (obj->uart == UART_7) {
+ __USART7_FORCE_RESET();
+ __USART7_RELEASE_RESET();
+ __USART7_CLK_DISABLE();
+ }
+#endif
+
+#if defined USART8_BASE
+ if (obj->uart == UART_8) {
+ __USART8_FORCE_RESET();
+ __USART8_RELEASE_RESET();
+ __USART8_CLK_DISABLE();
+ }
+#endif
+
+
+ // Configure GPIOs
+ pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+
+ serial_irq_ids[obj->index] = 0;
+}
+
+void serial_baud(serial_t *obj, int baudrate)
+{
+ obj->baudrate = baudrate;
+ init_uart(obj);
+}
+
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
+{
+ if (data_bits == 9) {
+ obj->databits = UART_WORDLENGTH_9B;
+ } else {
+ obj->databits = UART_WORDLENGTH_8B;
+ }
+
+ switch (parity) {
+ case ParityOdd:
+ case ParityForced0:
+ obj->parity = UART_PARITY_ODD;
+ break;
+ case ParityEven:
+ case ParityForced1:
+ obj->parity = UART_PARITY_EVEN;
+ break;
+ default: // ParityNone
+ obj->parity = UART_PARITY_NONE;
+ break;
+ }
+
+ if (stop_bits == 2) {
+ obj->stopbits = UART_STOPBITS_2;
+ } else {
+ obj->stopbits = UART_STOPBITS_1;
+ }
+
+ init_uart(obj);
+}
+
+/******************************************************************************
+ * INTERRUPTS HANDLING
+ ******************************************************************************/
+
+static void uart_irq(UARTName name, int id)
+{
+ UartHandle.Instance = (USART_TypeDef *)name;
+ if (serial_irq_ids[id] != 0) {
+ if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
+ irq_handler(serial_irq_ids[id], TxIrq);
+ __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
+ }
+ if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
+ irq_handler(serial_irq_ids[id], RxIrq);
+ volatile uint32_t tmpval = UartHandle.Instance->RDR; // Clear RXNE bit
+ }
+ }
+}
+
+static void uart1_irq(void)
+{
+ uart_irq(UART_1, 0);
+}
+
+static void uart2_irq(void)
+{
+ uart_irq(UART_2, 1);
+}
+
+#if defined USART3_BASE
+static void uart3_irq(void)
+{
+ uart_irq(UART_3, 2);
+}
+#endif
+
+#if defined USART4_BASE
+static void uart4_irq(void)
+{
+ uart_irq(UART_4, 3);
+}
+#endif
+
+#if defined USART5_BASE
+static void uart5_irq(void)
+{
+ uart_irq(UART_5, 4);
+}
+#endif
+
+#if defined USART6_BASE
+static void uart6_irq(void)
+{
+ uart_irq(UART_6, 5);
+}
+#endif
+
+#if defined USART7_BASE
+static void uart7_irq(void)
+{
+ uart_irq(UART_7, 6);
+}
+#endif
+
+#if defined USART8_BASE
+static void uart8_irq(void)
+{
+ uart_irq(UART_8, 7);
+}
+#endif
+
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
+{
+ irq_handler = handler;
+ serial_irq_ids[obj->index] = id;
+}
+
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
+{
+ IRQn_Type irq_n = (IRQn_Type)0;
+ uint32_t vector = 0;
+
+ UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+
+ if (obj->uart == UART_1) {
+ irq_n = USART1_IRQn;
+ vector = (uint32_t)&uart1_irq;
+ }
+
+ if (obj->uart == UART_2) {
+ irq_n = USART2_IRQn;
+ vector = (uint32_t)&uart2_irq;
+ }
+
+#if defined (TARGET_STM32F091RC)
+ if (obj->uart == UART_3) {
+ irq_n = USART3_8_IRQn;
+ vector = (uint32_t)&uart3_irq;
+ }
+
+ if (obj->uart == UART_4) {
+ irq_n = USART3_8_IRQn;
+ vector = (uint32_t)&uart4_irq;
+ }
+
+ if (obj->uart == UART_5) {
+ irq_n = USART3_8_IRQn;
+ vector = (uint32_t)&uart5_irq;
+ }
+
+ if (obj->uart == UART_6) {
+ irq_n = USART3_8_IRQn;
+ vector = (uint32_t)&uart6_irq;
+ }
+
+ if (obj->uart == UART_7) {
+ irq_n = USART3_8_IRQn;
+ vector = (uint32_t)&uart7_irq;
+ }
+
+ if (obj->uart == UART_8) {
+ irq_n = USART3_8_IRQn;
+ vector = (uint32_t)&uart8_irq;
+ }
+
+#elif defined (TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
+
+#else
+ if (obj->uart == UART_3) {
+ irq_n = USART3_4_IRQn;
+ vector = (uint32_t)&uart3_irq;
+ }
+
+ if (obj->uart == UART_4) {
+ irq_n = USART3_4_IRQn;
+ vector = (uint32_t)&uart4_irq;
+ }
+#endif
+
+ if (enable) {
+
+ if (irq == RxIrq) {
+ __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
+ } else { // TxIrq
+ __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
+ }
+
+ NVIC_SetVector(irq_n, vector);
+ NVIC_EnableIRQ(irq_n);
+
+ } else { // disable
+
+ int all_disabled = 0;
+
+ if (irq == RxIrq) {
+ __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
+ // Check if TxIrq is disabled too
+ if ((UartHandle.Instance->CR1 & USART_CR1_TCIE) == 0) all_disabled = 1;
+ } else { // TxIrq
+ __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TC);
+ // Check if RxIrq is disabled too
+ if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
+ }
+
+ if (all_disabled) NVIC_DisableIRQ(irq_n);
+
+ }
+}
+
+/******************************************************************************
+ * READ/WRITE
+ ******************************************************************************/
+
+int serial_getc(serial_t *obj)
+{
+ USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
+ while (!serial_readable(obj));
+ return (int)(uart->RDR & (uint16_t)0xFF);
+}
+
+void serial_putc(serial_t *obj, int c)
+{
+ USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
+ while (!serial_writable(obj));
+ uart->TDR = (uint32_t)(c & (uint16_t)0xFF);
+}
+
+int serial_readable(serial_t *obj)
+{
+ int status;
+ UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+ // Check if data is received
+ status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
+ return status;
+}
+
+int serial_writable(serial_t *obj)
+{
+ int status;
+ UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+ // Check if data is transmitted
+ status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
+ return status;
+}
+
+void serial_clear(serial_t *obj)
+{
+ UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+ __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
+ __HAL_UART_SEND_REQ(&UartHandle, UART_RXDATA_FLUSH_REQUEST);
+}
+
+void serial_pinout_tx(PinName tx)
+{
+ pinmap_pinout(tx, PinMap_UART_TX);
+}
+
+void serial_break_set(serial_t *obj)
+{
+ // [TODO]
+}
+
+void serial_break_clear(serial_t *obj)
+{
+ // [TODO]
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/sleep.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,107 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "sleep_api.h"
+
+#if DEVICE_SLEEP
+
+#include "cmsis.h"
+
+#if defined(TARGET_STM32F070RB)
+void sleep(void)
+{
+ TIM_HandleTypeDef TimMasterHandle;
+
+ TimMasterHandle.Instance = TIM1;
+
+ // Disable HAL tick and us_ticker update interrupts
+ __HAL_TIM_DISABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
+
+ // Request to enter SLEEP mode
+ HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
+
+ // Enable HAL tick and us_ticker update interrupts
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
+}
+
+#elif defined(TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
+void sleep(void)
+{
+ // Stop HAL systick
+ HAL_SuspendTick();
+ // Request to enter SLEEP mode
+ HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
+ // Restart HAL systick
+ HAL_ResumeTick();
+}
+
+#else
+static TIM_HandleTypeDef TimMasterHandle;
+
+void sleep(void)
+{
+ TimMasterHandle.Instance = TIM2;
+
+ // Disable HAL tick interrupt
+ __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+ // Request to enter SLEEP mode
+ HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
+
+ // Enable HAL tick interrupt
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+}
+#endif
+
+#if defined(TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
+void deepsleep(void)
+{
+ // Request to enter STOP mode with regulator in low power mode
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+
+ HAL_InitTick(TICK_INT_PRIORITY);
+
+ // After wake-up from STOP reconfigure the PLL
+ SetSysClock();
+
+ HAL_InitTick(TICK_INT_PRIORITY);
+}
+
+#else
+void deepsleep(void)
+{
+ // Request to enter STOP mode with regulator in low power mode
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+
+ // After wake-up from STOP reconfigure the PLL
+ SetSysClock();
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/spi_api.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,298 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "spi_api.h"
+
+#if DEVICE_SPI
+
+#include <math.h>
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+
+static SPI_HandleTypeDef SpiHandle;
+
+static void init_spi(spi_t *obj)
+{
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+
+ __HAL_SPI_DISABLE(&SpiHandle);
+
+ SpiHandle.Init.Mode = obj->mode;
+ SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
+ SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
+ SpiHandle.Init.CLKPhase = obj->cpha;
+ SpiHandle.Init.CLKPolarity = obj->cpol;
+ SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
+ SpiHandle.Init.CRCPolynomial = 7;
+ SpiHandle.Init.DataSize = obj->bits;
+ SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
+ SpiHandle.Init.NSS = obj->nss;
+ SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
+
+ HAL_SPI_Init(&SpiHandle);
+
+ __HAL_SPI_ENABLE(&SpiHandle);
+}
+
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
+{
+ // Determine the SPI to use
+ SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
+ SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
+ SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
+ SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
+
+ SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
+ SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
+
+ obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
+ MBED_ASSERT(obj->spi != (SPIName)NC);
+
+ // Enable SPI clock
+ if (obj->spi == SPI_1) {
+ __SPI1_CLK_ENABLE();
+ }
+ if (obj->spi == SPI_2) {
+ __SPI2_CLK_ENABLE();
+ }
+
+ // Configure the SPI pins
+ pinmap_pinout(mosi, PinMap_SPI_MOSI);
+ pinmap_pinout(miso, PinMap_SPI_MISO);
+ pinmap_pinout(sclk, PinMap_SPI_SCLK);
+
+ // Save new values
+ obj->bits = SPI_DATASIZE_8BIT;
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_1EDGE;
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256;
+
+ obj->pin_miso = miso;
+ obj->pin_mosi = mosi;
+ obj->pin_sclk = sclk;
+ obj->pin_ssel = ssel;
+
+ if (ssel == NC) { // SW NSS Master mode
+ obj->mode = SPI_MODE_MASTER;
+ obj->nss = SPI_NSS_SOFT;
+ } else { // Slave
+ pinmap_pinout(ssel, PinMap_SPI_SSEL);
+ obj->mode = SPI_MODE_SLAVE;
+ obj->nss = SPI_NSS_HARD_INPUT;
+ }
+
+ init_spi(obj);
+}
+
+void spi_free(spi_t *obj)
+{
+ // Reset SPI and disable clock
+ if (obj->spi == SPI_1) {
+ __SPI1_FORCE_RESET();
+ __SPI1_RELEASE_RESET();
+ __SPI1_CLK_DISABLE();
+ }
+
+ if (obj->spi == SPI_2) {
+ __SPI2_FORCE_RESET();
+ __SPI2_RELEASE_RESET();
+ __SPI2_CLK_DISABLE();
+ }
+
+ // Configure GPIOs
+ pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+}
+
+void spi_format(spi_t *obj, int bits, int mode, int slave)
+{
+ // Save new values
+ if (bits == 16) {
+ obj->bits = SPI_DATASIZE_16BIT;
+ } else {
+ obj->bits = SPI_DATASIZE_8BIT;
+ }
+
+ switch (mode) {
+ case 0:
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_1EDGE;
+ break;
+ case 1:
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_2EDGE;
+ break;
+ case 2:
+ obj->cpol = SPI_POLARITY_HIGH;
+ obj->cpha = SPI_PHASE_1EDGE;
+ break;
+ default:
+ obj->cpol = SPI_POLARITY_HIGH;
+ obj->cpha = SPI_PHASE_2EDGE;
+ break;
+ }
+
+ if (slave == 0) {
+ obj->mode = SPI_MODE_MASTER;
+ obj->nss = SPI_NSS_SOFT;
+ } else {
+ obj->mode = SPI_MODE_SLAVE;
+ obj->nss = SPI_NSS_HARD_INPUT;
+ }
+
+ init_spi(obj);
+}
+
+void spi_frequency(spi_t *obj, int hz)
+{
+ // Note: The frequencies are obtained with SPI clock = 48 MHz (APB clock)
+ if (hz < 375000) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 188 kHz
+ } else if ((hz >= 375000) && (hz < 750000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
+ } else if ((hz >= 750000) && (hz < 1000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 750 kHz
+ } else if ((hz >= 1000000) && (hz < 3000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
+ } else if ((hz >= 3000000) && (hz < 6000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
+ } else if ((hz >= 6000000) && (hz < 12000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
+ } else if ((hz >= 12000000) && (hz < 24000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
+ } else { // >= 24000000
+ obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
+ }
+
+ init_spi(obj);
+}
+
+static inline int ssp_readable(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ // Check if data is received
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
+ return status;
+}
+
+static inline int ssp_writeable(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ // Check if data is transmitted
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
+ return status;
+}
+
+static inline void ssp_write(spi_t *obj, int value)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_writeable(obj));
+ if (obj->bits == SPI_DATASIZE_8BIT) {
+ // Force 8-bit access to the data register
+ uint8_t *p_spi_dr = 0;
+ p_spi_dr = (uint8_t *) & (spi->DR);
+ *p_spi_dr = (uint8_t)value;
+ } else { // SPI_DATASIZE_16BIT
+ spi->DR = (uint16_t)value;
+ }
+}
+
+static inline int ssp_read(spi_t *obj)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_readable(obj));
+ if (obj->bits == SPI_DATASIZE_8BIT) {
+ // Force 8-bit access to the data register
+ uint8_t *p_spi_dr = 0;
+ p_spi_dr = (uint8_t *) & (spi->DR);
+ return (int)(*p_spi_dr);
+ } else {
+ return (int)spi->DR;
+ }
+}
+
+static inline int ssp_busy(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
+ return status;
+}
+
+int spi_master_write(spi_t *obj, int value)
+{
+ ssp_write(obj, value);
+ return ssp_read(obj);
+}
+
+int spi_slave_receive(spi_t *obj)
+{
+ return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
+};
+
+int spi_slave_read(spi_t *obj)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_readable(obj));
+ if (obj->bits == SPI_DATASIZE_8BIT) {
+ // Force 8-bit access to the data register
+ uint8_t *p_spi_dr = 0;
+ p_spi_dr = (uint8_t *) & (spi->DR);
+ return (int)(*p_spi_dr);
+ } else {
+ return (int)spi->DR;
+ }
+}
+
+void spi_slave_write(spi_t *obj, int value)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_writeable(obj));
+ if (obj->bits == SPI_DATASIZE_8BIT) {
+ // Force 8-bit access to the data register
+ uint8_t *p_spi_dr = 0;
+ p_spi_dr = (uint8_t *) & (spi->DR);
+ *p_spi_dr = (uint8_t)value;
+ } else { // SPI_DATASIZE_16BIT
+ spi->DR = (uint16_t)value;
+ }
+}
+
+int spi_busy(spi_t *obj)
+{
+ return ssp_busy(obj);
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/us_ticker.c Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,309 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <stddef.h>
+#include "us_ticker_api.h"
+#include "PeripheralNames.h"
+
+#if defined(TARGET_STM32F070RB)
+
+// Timer selection
+#define TIM_MST TIM1
+
+static TIM_HandleTypeDef TimMasterHandle;
+static int us_ticker_inited = 0;
+
+volatile uint32_t SlaveCounter = 0;
+volatile uint32_t oc_int_part = 0;
+volatile uint16_t oc_rem_part = 0;
+
+void set_compare(uint16_t count)
+{
+ TimMasterHandle.Instance = TIM_MST;
+ // Set new output compare value
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, count);
+ // Enable IT
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_init(void)
+{
+ if (us_ticker_inited) return;
+ us_ticker_inited = 1;
+
+ HAL_InitTick(0); // The passed value is not used
+}
+
+uint32_t us_ticker_read()
+{
+ uint32_t counter, counter2;
+ if (!us_ticker_inited) us_ticker_init();
+ // A situation might appear when Master overflows right after Slave is read and before the
+ // new (overflowed) value of Master is read. Which would make the code below consider the
+ // previous (incorrect) value of Slave and the new value of Master, which would return a
+ // value in the past. Avoid this by computing consecutive values of the timer until they
+ // are properly ordered.
+ counter = (uint32_t)(SlaveCounter << 16);
+ counter += TIM_MST->CNT;
+ while (1) {
+ counter2 = (uint32_t)(SlaveCounter << 16);
+ counter2 += TIM_MST->CNT;
+ if (counter2 > counter) {
+ break;
+ }
+ counter = counter2;
+ }
+ return counter2;
+}
+
+void us_ticker_set_interrupt(timestamp_t timestamp)
+{
+ int delta = (int)((uint32_t)timestamp - us_ticker_read());
+ uint16_t cval = TIM_MST->CNT;
+
+ if (delta <= 0) { // This event was in the past
+ us_ticker_irq_handler();
+ } else {
+ oc_int_part = (uint32_t)(delta >> 16);
+ oc_rem_part = (uint16_t)(delta & 0xFFFF);
+ if (oc_rem_part <= (0xFFFF - cval)) {
+ set_compare(cval + oc_rem_part);
+ oc_rem_part = 0;
+ } else {
+ set_compare(0xFFFF);
+ oc_rem_part = oc_rem_part - (0xFFFF - cval);
+ }
+ }
+}
+
+void us_ticker_disable_interrupt(void)
+{
+ TimMasterHandle.Instance = TIM_MST;
+ __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_clear_interrupt(void)
+{
+ TimMasterHandle.Instance = TIM_MST;
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
+ __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
+ }
+}
+
+#elif defined(TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
+
+// Timer selection:
+#define TIM_MST TIM1
+#define TIM_MST_UP_IRQ TIM1_BRK_UP_TRG_COM_IRQn
+#define TIM_MST_OC_IRQ TIM1_CC_IRQn
+#define TIM_MST_RCC __TIM1_CLK_ENABLE()
+
+static TIM_HandleTypeDef TimMasterHandle;
+
+
+static int us_ticker_inited = 0;
+static volatile uint32_t SlaveCounter = 0;
+static volatile uint32_t oc_int_part = 0;
+static volatile uint16_t oc_rem_part = 0;
+
+void set_compare(uint16_t count)
+{
+ TimMasterHandle.Instance = TIM_MST;
+
+ // Set new output compare value
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, count);
+ // Enable IT
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+// Used to increment the slave counter
+static void tim_update_irq_handler(void)
+{
+ TimMasterHandle.Instance = TIM_MST;
+
+ // Clear Update interrupt flag
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE) == SET) {
+ __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE);
+ SlaveCounter++;
+ }
+}
+
+// Used by interrupt system
+static void tim_oc_irq_handler(void)
+{
+ uint16_t cval = TIM_MST->CNT;
+ TimMasterHandle.Instance = TIM_MST;
+
+ // Clear CC1 interrupt flag
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
+ __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
+ }
+ if (oc_rem_part > 0) {
+ set_compare(oc_rem_part); // Finish the remaining time left
+ oc_rem_part = 0;
+ } else {
+ if (oc_int_part > 0) {
+ set_compare(0xFFFF);
+ oc_rem_part = cval; // To finish the counter loop the next time
+ oc_int_part--;
+ } else {
+ us_ticker_irq_handler();
+ }
+ }
+
+}
+
+void us_ticker_init(void)
+{
+
+ if (us_ticker_inited) return;
+ us_ticker_inited = 1;
+
+ // Enable timer clock
+ TIM_MST_RCC;
+
+ // Configure time base
+ TimMasterHandle.Instance = TIM_MST;
+ TimMasterHandle.Init.Period = 0xFFFF;
+ TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 �s tick
+ TimMasterHandle.Init.ClockDivision = 0;
+ TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+ HAL_TIM_Base_Init(&TimMasterHandle);
+
+ // Configure interrupts
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_UPDATE);
+
+ // Update interrupt used for 32-bit counter
+ NVIC_SetVector(TIM_MST_UP_IRQ, (uint32_t)tim_update_irq_handler);
+ NVIC_EnableIRQ(TIM_MST_UP_IRQ);
+
+ // Output compare interrupt used for timeout feature
+ NVIC_SetVector(TIM_MST_OC_IRQ, (uint32_t)tim_oc_irq_handler);
+ NVIC_EnableIRQ(TIM_MST_OC_IRQ);
+
+ // Enable timer
+ HAL_TIM_Base_Start(&TimMasterHandle);
+}
+
+uint32_t us_ticker_read()
+{
+ uint32_t counter, counter2;
+ if (!us_ticker_inited) us_ticker_init();
+ // A situation might appear when Master overflows right after Slave is read and before the
+ // new (overflowed) value of Master is read. Which would make the code below consider the
+ // previous (incorrect) value of Slave and the new value of Master, which would return a
+ // value in the past. Avoid this by computing consecutive values of the timer until they
+ // are properly ordered.
+ counter = (uint32_t)(SlaveCounter << 16);
+ counter += TIM_MST->CNT;
+ while (1) {
+ counter2 = (uint32_t)(SlaveCounter << 16);
+ counter2 += TIM_MST->CNT;
+ if (counter2 > counter) {
+ break;
+ }
+ counter = counter2;
+ }
+ return counter2;
+}
+
+void us_ticker_set_interrupt(timestamp_t timestamp)
+{
+ int delta = (int)((uint32_t)timestamp - us_ticker_read());
+ uint16_t cval = TIM_MST->CNT;
+
+ if (delta <= 0) { // This event was in the past
+ us_ticker_irq_handler();
+ } else {
+ oc_int_part = (uint32_t)(delta >> 16);
+ oc_rem_part = (uint16_t)(delta & 0xFFFF);
+ if (oc_rem_part <= (0xFFFF - cval)) {
+ set_compare(cval + oc_rem_part);
+ oc_rem_part = 0;
+ } else {
+ set_compare(0xFFFF);
+ oc_rem_part = oc_rem_part - (0xFFFF - cval);
+ }
+ }
+}
+
+void us_ticker_disable_interrupt(void)
+{
+ TimMasterHandle.Instance = TIM_MST;
+ __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_clear_interrupt(void)
+{
+ TimMasterHandle.Instance = TIM_MST;
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
+ __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
+ }
+}
+
+#else
+
+// 32-bit timer selection
+#define TIM_MST TIM2
+
+static TIM_HandleTypeDef TimMasterHandle;
+static int us_ticker_inited = 0;
+
+void us_ticker_init(void)
+{
+ if (us_ticker_inited) return;
+ us_ticker_inited = 1;
+
+ TimMasterHandle.Instance = TIM_MST;
+
+ HAL_InitTick(0); // The passed value is not used
+}
+
+uint32_t us_ticker_read()
+{
+ if (!us_ticker_inited) us_ticker_init();
+ return TIM_MST->CNT;
+}
+
+void us_ticker_set_interrupt(timestamp_t timestamp)
+{
+ // Set new output compare value
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
+ // Enable IT
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_disable_interrupt(void)
+{
+ __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_clear_interrupt(void)
+{
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+#endif