Revision 2:29a5b859318a, committed 2016-02-25

Comitter:

EmbeddedSam

Date:

Thu Feb 25 14:22:29 2016 +0000

Parent:

1:85b1605ed4e0

Commit message:

This just shows how to exercise the DAC on the Nucleo F303K8 it changes a PWM duty cycle and makes the DAC correspond to the value.

Changed in this revision

diff -r 85b1605ed4e0 -r 29a5b859318a OneWire_Methods.cpp
--- a/OneWire_Methods.cpp	Wed Feb 24 12:33:26 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,175 +0,0 @@
-#include "OneWire_Methods.h"
-#include "mbed.h"
-
-//Peripherals and typedefs
-extern DigitalInOut   one_wire_pin;
-
-unsigned char OneWire_ReadByte(void)
-{
-    unsigned char result=0;
-
-    for (int i = 0; i < 8; i++){    
-        result >>= 1;           // shift the result to get it ready for the next bit
-        // if result is one, then set MS bit
-        if (OneWire_ReadBit()){result |= 0x80;}    
-    }
-    return result;
-}
-
-void OneWire_WriteByte(unsigned char byte_to_write)
-{  
-    for (int i = 0; i<8; i++)     // Loop to write each bit in the byte, LS-bit first
-    {
-        OneWire_WriteBit(byte_to_write & 0x01);        
-        byte_to_write >>= 1;      // shift the data byte for the next bit
-    }
-}
-
-bool OneWire_ReadBit(void)
-{  
-    bool result;
-    one_wire_pin.output();
-    one_wire_pin = 0;
-    OneWire_Delay('A');
-    one_wire_pin.input();
-    one_wire_pin.mode(PullUp);
-    OneWire_Delay('E');
-    result = one_wire_pin.read();
-    OneWire_Delay('F');
-    return result;
-}
-
-void OneWire_WriteBit (bool bit_to_write){
-    
-    if (bit_to_write == 1)
-    {
-        // Write '1' bit
-        one_wire_pin.output();
-        one_wire_pin = 0;
-        OneWire_Delay('A');
-        one_wire_pin.input();
-        one_wire_pin.mode(PullUp);
-        OneWire_Delay('B');
-    }
-    else
-    {
-        one_wire_pin.output();
-        one_wire_pin = 0;
-        OneWire_Delay('C');
-        one_wire_pin.input();
-        OneWire_Delay('D');
-    }
-}
-bool OneWire_Reset (void)
-{
-    //Checks whether there is a device connected, returns true or false
-    //Debugging console output can be used if it is defined
-    bool result = false;
-    one_wire_pin.output();
-    one_wire_pin.write(0); //Pull the line high
-    OneWire_Delay('H');
-    one_wire_pin.input();
-    one_wire_pin.mode(PullUp);
-    OneWire_Delay('I');
-    if(one_wire_pin.read() == 0){ result = true;}
-    OneWire_Delay('J'); 
-    #ifdef Debugging
-        pc.printf("\n\rResult from reset: %d",result);
-    #endif
-    return result;
-}
-
-void OneWire_TestDelays(void)
-{
-    //Cycles the output pin through all the delays so you
-    //can see whether they are all the right timings.
-    one_wire_pin.output();
-    for(int i=0;i<6;i++){
-        one_wire_pin = !one_wire_pin; //toggle the pin 6 times to signal start of test at 100us
-        wait_us(100);   
-    }
-    OneWire_Delay('A');
-    one_wire_pin = !one_wire_pin;
-    OneWire_Delay('A');
-    one_wire_pin = !one_wire_pin;
-    
-    OneWire_Delay('B');
-    one_wire_pin = !one_wire_pin;
-    OneWire_Delay('B');
-    one_wire_pin = !one_wire_pin;
-    
-    OneWire_Delay('C');
-    one_wire_pin = !one_wire_pin;
-    OneWire_Delay('C');
-    one_wire_pin = !one_wire_pin;
-    
-    OneWire_Delay('D');
-    one_wire_pin = !one_wire_pin;
-    OneWire_Delay('D');
-    one_wire_pin = !one_wire_pin;
-    
-    OneWire_Delay('E');
-    one_wire_pin = !one_wire_pin;
-    OneWire_Delay('E');
-    one_wire_pin = !one_wire_pin;
-    
-    OneWire_Delay('F');
-    one_wire_pin = !one_wire_pin;
-    OneWire_Delay('F');
-    one_wire_pin = !one_wire_pin;
-    
-    OneWire_Delay('G');
-    one_wire_pin = !one_wire_pin;
-    OneWire_Delay('G');
-    one_wire_pin = !one_wire_pin;
-    
-    OneWire_Delay('H');
-    one_wire_pin = !one_wire_pin;
-    OneWire_Delay('H');
-    one_wire_pin = !one_wire_pin;
-    
-        
-    OneWire_Delay('I');
-    one_wire_pin = !one_wire_pin;
-    OneWire_Delay('I');
-    one_wire_pin = !one_wire_pin;
-    
-    OneWire_Delay('J');
-    one_wire_pin = !one_wire_pin;
-    OneWire_Delay('J');
-    one_wire_pin = !one_wire_pin;
-    
-}
-
-//Functions
-void OneWire_Delay(char letter)
-{
-    //Recommended delays from Maxim (standard speed not overdrive)
-    //https://www.maximintegrated.com/en/app-notes/index.mvp/id/126
-    
-    //Letter  Speed       Recommended (µs)
-    //A       Standard    6
-    //B       Standard    64
-    //C       Standard    60
-    //D       Standard    10
-    //E       Standard    9
-    //F       Standard    55
-    //G       Standard    0
-    //H       Standard    480
-    //I       Standard    70
-    //J       Standard    410
-    switch(letter)
-    {
-        case 'A': wait_us(1); break;
-        case 'B': wait_us(64); break;
-        case 'C': wait_us(60); break;
-        case 'D': wait_us(10); break;
-        case 'E': wait_us(5); break;
-        case 'F': wait_us(55); break;
-        case 'G': wait_us(0); break;
-        case 'H': wait_us(480); break;
-        case 'I': wait_us(70); break;
-        case 'J': wait_us(410); break;
-        default: break;
-    }
-}

diff -r 85b1605ed4e0 -r 29a5b859318a OneWire_Methods.h
--- a/OneWire_Methods.h	Wed Feb 24 12:33:26 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,7 +0,0 @@
-void OneWire_Delay(char letter);
-void OneWire_TestDelays(void);
-bool OneWire_Reset(void);
-void OneWire_WriteBit(bool bit_to_write);
-bool OneWire_ReadBit(void);
-void OneWire_WriteByte(unsigned char byte_to_write);
-unsigned char OneWire_ReadByte(void);

diff -r 85b1605ed4e0 -r 29a5b859318a PID.lib
--- a/PID.lib	Wed Feb 24 12:33:26 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-http://mbed.org/users/aberk/code/PID/#6e12a3e5af19

diff -r 85b1605ed4e0 -r 29a5b859318a ds2781.cpp
--- a/ds2781.cpp	Wed Feb 24 12:33:26 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,346 +0,0 @@
-#include "ds2781.h"
-#include "OneWire_Methods.h"
-
-/* --------------------------------------------------------------------------
-   This file includes the functions needed to access and modify the registers
-   in a DS2781 using the 1-Wire protocol. The DS2781 is an IC that measures
-   voltage, current, accumulated current and temperature. It implements
-   capacity estimation algorithms for rechargeable batteries. However, this
-   file only includes routines to access the electrical parameters and not
-   the age-estimation registers.
-   --------------------------------------------------------------------------
-----------------------
-   NOTE_1: The functions that return parameters, do so in the units reported
-   in the description of each function. The user should implement the scaling
-   on his/her own.  
-   -------------------------------------------------------------------------- */
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : ReadVoltage                                                 *
- * Overview : Returns the voltage measured at the VIN input of the DS2781      *
- *            in units of 9.76mV                                               *
- * Return type : 16-bit unsigned int                                           *
- * Parameters : None                                                           *
- * Time : < 4.3ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-int ReadVoltage (void)
-{
-    uint16_t result = 0;
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( READ_DATA );
-        OneWire_WriteByte( 0x0C );                      //Register Address
-        result  = OneWire_ReadByte()  << 8;     //MSB   
-        result |= OneWire_ReadByte() ;          //LSB
-    }
-    return (result >> 5);
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : ReadCurrent                                                 *
- * Overview : Returns the current measured through Rsns external to DS2781 in  *
- *            units of 1.5625uV/Rsns. Positive current indicates discharge     *
- * Return type : 16-bit unsigned int                                           *
- * Parameters : None                                                           *
- * Time : < 4.3ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-uint16_t ReadCurrent (void)
-{
-    uint16_t result = 0;
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( READ_DATA );
-        OneWire_WriteByte( 0x0E );                      //Register Address
-        result  = ((uint16_t)OneWire_ReadByte() ) << 8;     //MSB   
-        result |= ((uint16_t)OneWire_ReadByte() );          //LSB
-    }
-    return result;
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : ReadAccumulatedCurrent                                      *
- * Overview : Returns the accumulated current at the DS2781 in units of        *
- *            1.526nVhr/Rsns                                                   *
- * Return type : 32-bit unsigned long                                          *
- * Parameters : None                                                           *
- * Time : < 5.8ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-uint32_t ReadAccumulatedCurrent (void)
-{
-    unsigned long result = 0;
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( READ_DATA );
-        OneWire_WriteByte( 0x10 );                      //Register Address
-        result  = ((unsigned long)OneWire_ReadByte() ) << 24;       //MSB
-        result |= ((unsigned long)OneWire_ReadByte() ) << 16;
-        result |= ((unsigned long)OneWire_ReadByte() ) << 8;    
-        result |= ((unsigned long)OneWire_ReadByte() );         //LSB
-    }
-    return (result >>  4);
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : ResetAccumulatedCurrent                                     *
- * Overview : Resets the accumulated current register at the DS2781            *
- * Return type : Void                                                          *
- * Parameters : None                                                           *
- * Time : < 4.2ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-void ResetAccumulatedCurrent (void)
-{
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( WRITE_DATA );
-        OneWire_WriteByte( 0x10 );                      //Register Address
-        OneWire_WriteByte( 0x00 );                      //MSB
-        OneWire_WriteByte( 0x00 );                      //LSB
-    }
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : ReadNetAddress                                              *
- * Overview : Returns the net address of the DS2781                            *
- * Return type : 64-bit unsigned long long                                     *
- * Parameters : None                                                           *
- * Time : < 7.3ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-uint32_t ReadNetAddress (void)
-{
-    uint16_t result = 0;
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( READ_NETADDRESS );
-        //result  = ((Quint16_t)OneWire_ReadByte() );       //MSB
-        //result |= ((Quint16_t)OneWire_ReadByte() ) << 8;
-        //result |= ((Quint16_t)OneWire_ReadByte() ) << 16;
-        //result |= ((Quint16_t)OneWire_ReadByte() ) << 24;
-        //result |= ((Quint16_t)OneWire_ReadByte() ) << 32;
-        //result |= ((Quint16_t)OneWire_ReadByte() ) << 40;
-        //result |= ((Quint16_t)OneWire_ReadByte() ) << 48; 
-        //result |= ((Quint16_t)OneWire_ReadByte() ) <<56;          //LSB
-    }
-    return result;
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : ReadTemperature                                             *
- * Overview : Returns the temperature measured by the DS2781 in units of       *
- *            0.125°C                                                          *
- * Return type : 16-bit unsigned int                                           *
- * Parameters : None                                                           *
- * Time : < 4.3ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-uint16_t ReadTemperature (void)
-{
-    uint16_t result = 0;
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( READ_DATA );
-        OneWire_WriteByte( 0x0A );                      //Register Address
-        result  = ((uint16_t)OneWire_ReadByte() ) << 8;     //MSB   
-        result |= ((uint16_t)OneWire_ReadByte() );          //LSB
-    }
-    return (result >> 5);
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : ReadCurrentOffset                                           *
- * Overview : Returns the value of the current offset register of the DS2781   *
- *            in units of 1.56uV/Rsns                                          *
- * Return type : 8-bit uint8_t                                         *
- * Parameters : None                                                           *
- * Time : < 3.6ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-uint8_t ReadCurrentOffset (void)
-{
-    uint8_t result = 0;
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( READ_DATA );
-        OneWire_WriteByte( 0x7B );                      //Register Address
-        result  = OneWire_ReadByte();
-    }
-    return result;
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : WriteCurrentOffset                                          *
- * Overview : Writes to the current offset register of the DS2781 in units of  *
- *            1.56uV/Rsns                                                      *
- * Return type : Void                                                          *
- * Parameters : Byte to be written to the register in 2's complement           *
- * Time : < 3.6ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-void  WriteCurrentOffset (uint8_t offset)
-{
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( WRITE_DATA );
-        OneWire_WriteByte( 0x7B );                      //Register Address
-        OneWire_WriteByte( offset );
-    }
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : AdjustCurrentOffset                                         *
- * Overview : Adjusts the value of the current offset register of the DS2781   *
- *            by taking into account the offset at no current. Should only     *
- *            be called when the battery is supplying no current               *
- * Return type : Void                                                          *
- * Parameters : None                                                           *
- * Time : < 3.62s                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-void AdjustCurrentOffset (void)
-{
-    char offset = 0;
-    
-    WriteCurrentOffset ( 0x0 );                     //Reset Current Offset Register
-
-    //Delay100MSx(36);                                //Wait 3.6s for current register to update
-
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( READ_DATA );
-        OneWire_WriteByte( 0x0F );                      //Current Register LSB
-        offset  = OneWire_ReadByte();   
-    }
-
-    offset = 256 - offset;                          //2's complement Negating
-
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( WRITE_DATA );
-        OneWire_WriteByte( 0x7B );                      //Current Offset Register
-        OneWire_WriteByte( offset );    
-    }
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : UpdateControlRegister                                       *
- * Overview : Writes to the Control register of the DS2781 using the values    *
- *            supplied as a byte parameter. Writes to EEPROM addresses are     *
- *            ignored for up to 15ms after this function is called.            *
- * Return type : Void                                                          *
- * Parameters : None                                                           *
- * Time : < 6.4ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-void UpdateControlRegister (uint8_t control)
-{
-    if( OneWire_Reset() == true )
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( WRITE_DATA );
-        OneWire_WriteByte( 0x60 );                      //Register Address
-        OneWire_WriteByte( control );
-    }
-
-    if( OneWire_Reset() == true )
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( COPY_DATA );
-        OneWire_WriteByte( 0x60 );                      //Register Address
-    }
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : ReadRAM                                                     *
- * Overview : Reads a byte from the shadow RAM of the DS2781 at the given      *
- *            memory address                                                   *
- * Return type : 8-bit uint8_t                                         *
- * Parameters : Address of register to be read                                 *
- * Time : < 3.6ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-uint8_t ReadRAM (uint8_t addr)
-{
-    uint8_t result = 0;
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( READ_DATA );
-        OneWire_WriteByte( addr );                      //Register Address
-        result  = OneWire_ReadByte();
-    }
-    return result;
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : WriteRAM                                                    *
- * Overview : Writes the given byte to the shadow RAM of the DS2781 at the     *
- *            given memory address                                             *
- * Return type : Void                                                          *
- * Parameters : Byte to be written, address of register                        *
- * Time : < 3.6ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-void WriteRAM (uint8_t byte, uint8_t addr)
-{
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( WRITE_DATA );
-        OneWire_WriteByte( addr );                      //Register Address
-        OneWire_WriteByte( byte );
-    }
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : CopyEEPROM                                                  *
- * Overview : This function copies the contents of the EEPROM shadow RAM to    *
- *            EEPROM cells for the EEPROM block containing thr given address.  *
- *            Writes to EEPROM addresses are ignored for up to 15ms after this *
- *            function is called.                                              *
- * Return type : Void                                                          *
- * Parameters : Memory address of shadow RAM to be copied                      *
- * Time : < 2.9ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-void CopyEEPROM (uint8_t addr)
-{
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( COPY_DATA );
-        OneWire_WriteByte( addr );
-    }
-}
-
-/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Function name : RecallEEPROM                                                *
- * Overview : This function copies the contents of the EEPROM cells to the     *
- *            shadow RAM for the EEPROM block containing the given address.    *                                           *
- * Return type : Void                                                          *
- * Parameters : Memory address of EEPROM to be copied                          *
- * Time : < 2.9ms                                                              *
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
-
-void RecallEEPROM (uint8_t addr)
-{
-    if( OneWire_Reset() == true)
-    {       
-        OneWire_WriteByte( SKIP_NETADDRESS );
-        OneWire_WriteByte( RECALL_DATA );
-        OneWire_WriteByte( addr );
-    }
-}
-/* EOF */
\ No newline at end of file

diff -r 85b1605ed4e0 -r 29a5b859318a ds2781.h
--- a/ds2781.h	Wed Feb 24 12:33:26 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,32 +0,0 @@
-#include "stdint.h"
-
-/* ***** net address commands ***** */
-#define READ_NETADDRESS 0x33
-#define SKIP_NETADDRESS 0xCC
-
-
-/* ***** function commands ***** */
-#define READ_DATA 0x69
-#define WRITE_DATA 0x6C
-#define COPY_DATA 0x48
-#define RECALL_DATA 0xB8
-#define LOCK_EEPROM 0x6A    //DO NOT USE
-
-
-/* ***** function prototypes ***** */
-/* Function details can be found in the .c file */
-int ReadVoltage (void);
-uint16_t ReadCurrent (void);
-uint32_t ReadAccumulatedCurrent (void);
-void ResetAccumulatedCurrent (void);
-uint32_t ReadNetAddress (void);
-uint16_t ReadTemperature (void);
-uint8_t ReadCurrentOffset (void);
-void  WriteCurrentOffset (uint8_t offset);
-void AdjustCurrentOffset (void);
-void UpdateControlRegister (uint8_t control);
-uint8_t ReadRAM (uint8_t addr);
-void WriteRAM (uint8_t byte, uint8_t addr);
-void CopyEEPROM (uint8_t addr);
-void RecallEEPROM (uint8_t addr);
-

diff -r 85b1605ed4e0 -r 29a5b859318a main.cpp
--- a/main.cpp	Wed Feb 24 12:33:26 2016 +0000
+++ b/main.cpp	Thu Feb 25 14:22:29 2016 +0000
@@ -8,112 +8,79 @@
  */
 
 #include "mbed.h"
-#include "PID.h"
-#include "OneWire_Methods.h"
-#include "ds2781.h"
+
 
 #define CURRENT_CHECK_PERIOD_US 50    //Checks ths current of the motor every 100us
 #define TICKS_PER_REVOLUTION    12.0   //The encoder has 12 slots
-#define TICK_CHECK_PERIOD       0.1    //Checks ths speed every 100ms
+#define TICK_CHECK_PERIOD_US    10000    //Checks ths speed every 10ms
 #define TICKS_PER_SECOND_MAX    1800.0 //This was found through experimentation with motor, max speed = 8900RPM = ~1800 ticks per second 
 #define TICKS_PER_SECOND_MIN    1*TICKS_PER_REVOLUTION  //This is equal to 1RPS (60RPM) at however many ticks per revolution
 #define SETPOINT_RPM            4000   //Arbitrarily picked
 
 /* Peripherals */
-DigitalOut motorEnable(D8);
 PwmOut motorPWM(D6);
-Ticker periodicTimer1, periodicTimer2, periodicTimer3;
-InterruptIn freqInputPin(D11); 
-AnalogIn motorA_CurrentMinus(A1);
-AnalogIn motorA_CurrentPlus(A0);
-DigitalInOut   one_wire_pin(D9);
+AnalogOut  PWM_Duty_Cycle_DAC_Out(A5); //Used for plotting motor resonse on a scope
+Ticker periodicTimer1;
 
 //Peripherals used for debugging
 Serial pc(USBTX, USBRX); // tx, rx  just used for debugging
-DigitalOut debuggingLine(D2);
-/* Objects */
-PID controller(0.22, 0.01, 0.001, TICK_CHECK_PERIOD);
- 
-/* Motor Variables */
-float speed_rpm, speed_rps, ticks_per_second;
-volatile unsigned int tick_counter, final_count;
-float setPointRPM;
-float MotorACurrent;
 
-//Onewire battery variables
-int BatteryVoltageReading;
-float BatteryVoltage;
-
-void freqInputPin_Interrupt() {
-    //Triggers on the rising edge of the frequency signal
-    tick_counter++;
-}
-void check_TickCount(){
-    final_count = tick_counter;
-    //pc.printf("\n\rTick Count is : %d", final_count);
-    tick_counter = 0;
-    controller.setProcessValue(final_count);
-    //motorPWM = (float)1.0-controller.compute();
-}
-
-void check_Current(){  
-    MotorACurrent = (3.3f*motorA_CurrentPlus.read()) - (3.3f*motorA_CurrentMinus.read());
+float normalise(float real_min, float real_max, float scaled_min, float scaled_max, int value){
+        return (((value - real_min) * (scaled_max - scaled_min)) / (real_max - real_min)) + scaled_min; 
 }
 
 void Print_Variables_To_PC(){
-   //BatteryVoltageReading = ReadVoltage();
-   //BatteryVoltage = BatteryVoltageReading*0.00967;
-   
-   pc.printf("\n\r Speed in RPM is  : %.2f", (float)(final_count*(1.0/TICK_CHECK_PERIOD))*(60.0/TICKS_PER_REVOLUTION));
-   pc.printf("\n\r Motor Current %.2f", MotorACurrent);
-  // pc.printf("\n\r Battery Voltage %.2f", BatteryVoltage);
+   //pc.printf("put whatever you want here to be sent to PC once a second %d, %d, %f",var1,var2,var3);
 }
 
-
 int main() {
-    //Setup encoder interface
-    freqInputPin.rise(&freqInputPin_Interrupt);                  //chain interrupt to rising edge
-    periodicTimer1.attach(&check_TickCount, TICK_CHECK_PERIOD);  //Check the speed every interval
-    periodicTimer3.attach_us(&check_Current, CURRENT_CHECK_PERIOD_US);  //Check the current every interval see defines above
-    
-    //Setup PID Speed Controller
-    controller.setInputLimits(TICKS_PER_SECOND_MIN, TICKS_PER_SECOND_MAX); //From 60RPM to 8900RPM This needs to be changed for your motor
-    controller.setOutputLimits(0.0, 1.0); //Maximum duty cycle = 1.0, minimum = 0
-    controller.setMode(1);                //1 = auto mode
-    setPointRPM = ((SETPOINT_RPM/60.0)*TICKS_PER_REVOLUTION)/(1.0/TICK_CHECK_PERIOD ); //convert setpoint rpm to ticks per interval
-    controller.setSetPoint(setPointRPM);
-    
     //Setup PWM
-    motorEnable = 1;
     motorPWM.period_us(100);  //Set up for 10KHz PWM Switching Frequency
     
-    //Setup Debugging    
-    periodicTimer2.attach(&Print_Variables_To_PC, 1.0);          //Display stuff on serial port once a second
+    //Setup Debugging     
+    periodicTimer1.attach(&Print_Variables_To_PC, 1.0);          //Display stuff on serial port once a second
+    
+    motorPWM = 0;
+    PWM_Duty_Cycle_DAC_Out = motorPWM;
+    
+    float wait_time = 0.5;
     
-    while(1) {
-          motorPWM = 0.5;
-          wait(10);
+    while(1) { 
+        wait(wait_time);
+        motorPWM = 0.1;
+        PWM_Duty_Cycle_DAC_Out = motorPWM;
+        
+        wait(wait_time);
+        motorPWM = 0.2;
+        PWM_Duty_Cycle_DAC_Out = motorPWM;
+        
+        wait(wait_time);
+        motorPWM = 0.3;
+        PWM_Duty_Cycle_DAC_Out = motorPWM;
+        
+        wait(wait_time);
+        motorPWM = 0.4;
+        PWM_Duty_Cycle_DAC_Out = motorPWM;
+        
+        wait(wait_time);
+        motorPWM = 0.5;
+        PWM_Duty_Cycle_DAC_Out = motorPWM;
+        
+        wait(wait_time);
+        motorPWM = 0.6;
+        PWM_Duty_Cycle_DAC_Out = motorPWM;
+        
+        wait(wait_time);
+        motorPWM = 0.7;
+        PWM_Duty_Cycle_DAC_Out = motorPWM;
+        
+        wait(wait_time);
+        motorPWM = 0.8;
+        PWM_Duty_Cycle_DAC_Out = motorPWM;
+        
+        wait(wait_time);
+        motorPWM = 0.9;
+        PWM_Duty_Cycle_DAC_Out = motorPWM;
+    }
           
-          motorPWM = 0.8;
-          wait(5);
-//        setPointRPM = ((1500/60.0)*TICKS_PER_REVOLUTION)/(1.0/TICK_CHECK_PERIOD ); //convert setpoint rpm to ticks per interval
-//        controller.setSetPoint(setPointRPM);
-//        wait(10);
-//        setPointRPM = ((2000/60.0)*TICKS_PER_REVOLUTION)/(1.0/TICK_CHECK_PERIOD ); //convert setpoint rpm to ticks per interval
-//        controller.setSetPoint(setPointRPM);
-//        wait(10);
-//        setPointRPM = ((3000/60.0)*TICKS_PER_REVOLUTION)/(1.0/TICK_CHECK_PERIOD ); //convert setpoint rpm to ticks per interval
-//        controller.setSetPoint(setPointRPM);
-//        wait(10);
-//        setPointRPM = ((500/60.0)*TICKS_PER_REVOLUTION)/(1.0/TICK_CHECK_PERIOD ); //convert setpoint rpm to ticks per interval
-//        controller.setSetPoint(setPointRPM);
-//        wait(10);
-//        setPointRPM = ((2000/60.0)*TICKS_PER_REVOLUTION)/(1.0/TICK_CHECK_PERIOD ); //convert setpoint rpm to ticks per interval
-//        controller.setSetPoint(setPointRPM);
-//        wait(10);
-//        setPointRPM = ((1200/60.0)*TICKS_PER_REVOLUTION)/(1.0/TICK_CHECK_PERIOD ); //convert setpoint rpm to ticks per interval
-//        controller.setSetPoint(setPointRPM);
-//        wait(10);
-
-    }
 }