Diff: targets/TARGET_Realtek/TARGET_AMEBA/log_uart_api.h

Revision:

167:e84263d55307

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Realtek/TARGET_AMEBA/log_uart_api.h	Wed Jun 21 17:46:44 2017 +0100
@@ -0,0 +1,67 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013-2016 Realtek Semiconductor Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef LOG_UART_API_H
+#define LOG_UART_API_H
+
+#include "device.h"
+#include "serial_api.h"
+#include "hal_log_uart.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef void (*loguart_irq_handler)(uint32_t id, LOG_UART_INT_ID event);
+
+typedef struct log_uart_s log_uart_t;
+
+int32_t log_uart_init (log_uart_t *obj, int baudrate, int data_bits, SerialParity parity, int stop_bits);
+void log_uart_free(log_uart_t *obj);
+void log_uart_baud(log_uart_t *obj, int baudrate);
+void log_uart_format(log_uart_t *obj, int data_bits, SerialParity parity, int stop_bits);
+void log_uart_irq_handler(log_uart_t *obj, loguart_irq_handler handler, uint32_t id);
+void log_uart_irq_set(log_uart_t *obj, LOG_UART_INT_ID irq, uint32_t enable);
+char log_uart_getc(log_uart_t *obj);
+void log_uart_putc(log_uart_t *obj, char c);
+int log_uart_readable(log_uart_t *obj);
+int log_uart_writable(log_uart_t *obj);
+void log_uart_clear(log_uart_t *obj);
+void log_uart_clear_tx(log_uart_t *obj);
+void log_uart_clear_rx(log_uart_t *obj);
+void log_uart_break_set(log_uart_t *obj);
+void log_uart_break_clear(log_uart_t *obj);
+void log_uart_tx_comp_handler(log_uart_t *obj, void *handler, uint32_t id);
+void log_uart_rx_comp_handler(log_uart_t *obj, void *handler, uint32_t id);
+void log_uart_line_status_handler(log_uart_t *obj, void *handler, uint32_t id);
+int32_t log_uart_recv (log_uart_t *obj, char *prxbuf, uint32_t len, uint32_t timeout_ms);
+int32_t log_uart_send (log_uart_t *obj, char *ptxbuf, uint32_t len, uint32_t timeout_ms);
+int32_t log_uart_recv_stream (log_uart_t *obj, char *prxbuf, uint32_t len);
+int32_t log_uart_send_stream (log_uart_t *obj, char *ptxbuf, uint32_t len);
+int32_t log_uart_recv_stream_timeout (log_uart_t *obj, char *prxbuf, uint32_t len,
+                                        uint32_t timeout_ms, void *force_cs);
+int32_t log_uart_send_stream_abort (log_uart_t *obj);
+int32_t log_uart_recv_stream_abort (log_uart_t *obj);
+void log_uart_disable (log_uart_t *obj);
+void log_uart_enable (log_uart_t *obj);
+uint8_t log_uart_raed_lsr(log_uart_t *obj);
+uint8_t log_uart_raed_msr(log_uart_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  // end of "#ifndef LOG_UART_API_H"