John Karatka
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed-dev
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_STM32F1/stm32f1xx_ll_usb.c
- Revision:
- 0:9b334a45a8ff
- Child:
- 124:6a4a5b7d7324
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F1/stm32f1xx_ll_usb.c Thu Oct 01 15:25:22 2015 +0300
@@ -0,0 +1,2210 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_ll_usb.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 15-December-2014
+ * @brief USB Low Layer HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization/de-initialization functions
+ * + I/O operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure.
+
+ (#) Call USB_CoreInit() API to initialize the USB Core peripheral.
+
+ (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup USB_LL USB Low Layer
+ * @brief Low layer module for USB_FS and USB_OTG_FS drivers
+ * @{
+ */
+
+#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED)
+
+#if defined(STM32F102x6) || defined(STM32F102xB) || \
+ defined(STM32F103x6) || defined(STM32F103xB) || \
+ defined(STM32F103xE) || defined(STM32F103xG) || \
+ defined(STM32F105xC) || defined(STM32F107xC)
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+#if defined (USB_OTG_FS)
+/** @defgroup USB_LL_Private_Functions USB Low Layer Private Functions
+ * @{
+ */
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx);
+/**
+ * @}
+ */
+#endif /* USB_OTG_FS */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup USB_LL_Exported_Functions USB Low Layer Exported Functions
+ * @{
+ */
+
+/** @defgroup USB_LL_Exported_Functions_Group1 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the PCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/*==============================================================================
+ USB OTG FS peripheral available on STM32F105xx and STM32F107xx devices
+==============================================================================*/
+#if defined (USB_OTG_FS)
+
+/**
+ * @brief Initializes the USB Core
+ * @param USBx: USB Instance
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ /* Select FS Embedded PHY */
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
+
+ /* Reset after a PHY select and set Host mode */
+ USB_CoreReset(USBx);
+
+ /* Deactivate the power down*/
+ USBx->GCCFG = USB_OTG_GCCFG_PWRDWN;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EnableGlobalInt
+ * Enables the controller's Global Int in the AHB Config reg
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT;
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DisableGlobalInt
+ * Disable the controller's Global Int in the AHB Config reg
+ * @param USBx : Selected device
+ * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT;
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetCurrentMode : Set functional mode
+ * @param USBx : Selected device
+ * @param mode : current core mode
+ * This parameter can be one of the these values:
+ * @arg USB_DEVICE_MODE: Peripheral mode mode
+ * @arg USB_HOST_MODE: Host mode
+ * @arg USB_DRD_MODE: Dual Role Device mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_ModeTypeDef mode)
+{
+ USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD);
+
+ if ( mode == USB_HOST_MODE)
+ {
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD;
+ }
+ else if ( mode == USB_DEVICE_MODE)
+ {
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
+ }
+ HAL_Delay(50);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevInit : Initializes the USB_OTG controller registers
+ * for device mode
+ * @param USBx : Selected device
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ uint32_t index = 0;
+
+ for (index = 0; index < 15 ; index++)
+ {
+ USBx->DIEPTXF[index] = 0;
+ }
+
+ /*Activate VBUS Sensing B */
+ USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
+
+ if (cfg.vbus_sensing_enable == 0)
+ {
+ USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+ }
+
+ /* Restart the Phy Clock */
+ USBx_PCGCCTL = 0;
+
+ /* Device mode configuration */
+ USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80;
+
+ /* Set Full speed phy */
+ USB_SetDevSpeed (USBx , USB_OTG_SPEED_FULL);
+
+ /* Flush the FIFOs */
+ USB_FlushTxFifo(USBx , 0x10); /* all Tx FIFOs */
+ USB_FlushRxFifo(USBx);
+
+ /* Clear all pending Device Interrupts */
+ USBx_DEVICE->DIEPMSK = 0;
+ USBx_DEVICE->DOEPMSK = 0;
+ USBx_DEVICE->DAINT = 0xFFFFFFFF;
+ USBx_DEVICE->DAINTMSK = 0;
+
+ for (index = 0; index < cfg.dev_endpoints; index++)
+ {
+ if ((USBx_INEP(index)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)
+ {
+ USBx_INEP(index)->DIEPCTL = (USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK);
+ }
+ else
+ {
+ USBx_INEP(index)->DIEPCTL = 0;
+ }
+
+ USBx_INEP(index)->DIEPTSIZ = 0;
+ USBx_INEP(index)->DIEPINT = 0xFF;
+ }
+
+ for (index = 0; index < cfg.dev_endpoints; index++)
+ {
+ if ((USBx_OUTEP(index)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA)
+ {
+ USBx_OUTEP(index)->DOEPCTL = (USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK);
+ }
+ else
+ {
+ USBx_OUTEP(index)->DOEPCTL = 0;
+ }
+
+ USBx_OUTEP(index)->DOEPTSIZ = 0;
+ USBx_OUTEP(index)->DOEPINT = 0xFF;
+ }
+
+ USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM);
+
+ /* Disable all interrupts. */
+ USBx->GINTMSK = 0;
+
+ /* Clear any pending interrupts */
+ USBx->GINTSTS = 0xBFFFFFFF;
+
+ /* Enable the common interrupts */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
+
+ /* Enable interrupts matching to the Device mode ONLY */
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST |\
+ USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT |\
+ USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM|\
+ USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
+
+ if(cfg.Sof_enable)
+ {
+ USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM;
+ }
+
+ if (cfg.vbus_sensing_enable == ENABLE)
+ {
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO
+ * @param USBx : Selected device
+ * @param num : FIFO number
+ * This parameter can be a value from 1 to 15
+ 15 means Flush all Tx FIFOs
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num )
+{
+ uint32_t count = 0;
+
+ USBx->GRSTCTL = ( USB_OTG_GRSTCTL_TXFFLSH |(uint32_t)( num << 5 ));
+
+ do
+ {
+ if (++count > 200000)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_FlushRxFifo : Flush Rx FIFO
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t count = 0;
+
+ USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH;
+
+ do
+ {
+ if (++count > 200000)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetDevSpeed :Initializes the DevSpd field of DCFG register
+ * depending the PHY type and the enumeration speed of the device.
+ * @param USBx : Selected device
+ * @param speed : device speed
+ * This parameter can be one of the these values:
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ * @retval Hal status
+ */
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed)
+{
+ USBx_DEVICE->DCFG |= speed;
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_GetDevSpeed :Return the Dev Speed
+ * @param USBx : Selected device
+ * @retval speed : device speed
+ * This parameter can be one of the these values:
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ */
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint8_t speed = 0;
+
+ if (((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ)||
+ ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_48MHZ))
+ {
+ speed = USB_OTG_SPEED_FULL;
+ }
+ else if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+ {
+ speed = USB_OTG_SPEED_LOW;
+ }
+
+ return speed;
+}
+
+/**
+ * @brief Activate and configure an endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in)
+ {
+ /* Assign a Tx FIFO */
+ ep->tx_fifo_num = ep->num;
+ }
+ /* Set initial data PID. */
+ if (ep->type == EP_TYPE_BULK )
+ {
+ ep->data_pid_start = 0;
+ }
+
+ if (ep->is_in == 1)
+ {
+ USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)));
+
+ if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+ ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+ }
+ }
+ else
+ {
+ USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16);
+
+ if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+ (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP));
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief De-activate and de-initialize an endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1)
+ {
+ USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
+ USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
+ }
+ else
+ {
+ USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EPStartXfer : setup and starts a transfer over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
+{
+ uint16_t pktcnt = 0;
+
+ /* IN endpoint */
+ if (ep->is_in == 1)
+ {
+ /* Zero Length Packet? */
+ if (ep->xfer_len == 0)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ }
+ else
+ {
+ /* Program the transfer size and packet count
+ * as follows: xfersize = N * maxpacket +
+ * short_packet pktcnt = N + (short_packet
+ * exist ? 1 : 0)
+ */
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket) << 19)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1 << 29));
+ }
+ }
+
+ if (ep->type != EP_TYPE_ISOC)
+ {
+ /* Enable the Tx FIFO Empty Interrupt for this EP */
+ if (ep->xfer_len > 0)
+ {
+ USBx_DEVICE->DIEPEMPMSK |= 1 << ep->num;
+ }
+ }
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM;
+ }
+ else
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
+ }
+ }
+
+ /* EP enable, IN data in FIFO */
+ USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ USB_WritePacket(USBx, ep->xfer_buff, ep->num, ep->xfer_len);
+ }
+ }
+ else /* OUT endpoint */
+ {
+ /* Program the transfer size and packet count as follows:
+ * pktcnt = N
+ * xfersize = N * maxpacket
+ */
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
+
+ if (ep->xfer_len == 0)
+ {
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket);
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19));
+ }
+ else
+ {
+ pktcnt = (ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket;
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (pktcnt << 19));
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt));
+ }
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM;
+ }
+ else
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM;
+ }
+ }
+ /* EP enable */
+ USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
+{
+ /* IN endpoint */
+ if (ep->is_in == 1)
+ {
+ /* Zero Length Packet? */
+ if (ep->xfer_len == 0)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19));
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ }
+ else
+ {
+ /* Program the transfer size and packet count
+ * as follows: xfersize = N * maxpacket +
+ * short_packet pktcnt = N + (short_packet
+ * exist ? 1 : 0)
+ */
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+
+ if(ep->xfer_len > ep->maxpacket)
+ {
+ ep->xfer_len = ep->maxpacket;
+ }
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19));
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
+ }
+
+ /* Enable the Tx FIFO Empty Interrupt for this EP */
+ if (ep->xfer_len > 0)
+ {
+ USBx_DEVICE->DIEPEMPMSK |= 1 << (ep->num);
+ }
+
+ /* EP enable, IN data in FIFO */
+ USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
+ }
+ else /* OUT endpoint */
+ {
+ /* Program the transfer size and packet count as follows:
+ * pktcnt = N
+ * xfersize = N * maxpacket
+ */
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
+
+ if (ep->xfer_len > 0)
+ {
+ ep->xfer_len = ep->maxpacket;
+ }
+
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19));
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket));
+
+ /* EP enable */
+ USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated
+ * with the EP/channel
+ * @param USBx : Selected device
+ * @param src : pointer to source buffer
+ * @param ch_ep_num : endpoint or host channel number
+ * @param len : Number of bytes to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len)
+{
+ uint32_t count32b = 0 , index = 0;
+
+ count32b = (len + 3) / 4;
+ for (index = 0; index < count32b; index++, src += 4)
+ {
+ USBx_DFIFO(ch_ep_num) = *((__packed uint32_t *)src);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ReadPacket : read a packet from the Tx FIFO associated
+ * with the EP/channel
+ * @param USBx : Selected device
+ * @param dest : destination pointer
+ * @param len : Number of bytes to read
+ * @retval pointer to destination buffer
+ */
+void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len)
+{
+ uint32_t index = 0;
+ uint32_t count32b = (len + 3) / 4;
+
+ for ( index = 0; index < count32b; index++, dest += 4 )
+ {
+ *(__packed uint32_t *)dest = USBx_DFIFO(0);
+
+ }
+ return ((void *)dest);
+}
+
+/**
+ * @brief USB_EPSetStall : set a stall condition over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in == 1)
+ {
+ if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == 0)
+ {
+ USBx_INEP(ep->num)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS);
+ }
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_STALL;
+ }
+ else
+ {
+ if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == 0)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS);
+ }
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_STALL;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EPClearStall : Clear a stall condition over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in == 1)
+ {
+ USBx_INEP(ep->num)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL;
+ if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+ }
+ }
+ else
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL;
+ if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_StopDevice : Stop the usb device mode
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t index = 0;
+
+ /* Clear Pending interrupt */
+ for (index = 0; index < 15 ; index++)
+ {
+ USBx_INEP(index)->DIEPINT = 0xFF;
+ USBx_OUTEP(index)->DOEPINT = 0xFF;
+ }
+ USBx_DEVICE->DAINT = 0xFFFFFFFF;
+
+ /* Clear interrupt masks */
+ USBx_DEVICE->DIEPMSK = 0;
+ USBx_DEVICE->DOEPMSK = 0;
+ USBx_DEVICE->DAINTMSK = 0;
+
+ /* Flush the FIFO */
+ USB_FlushRxFifo(USBx);
+ USB_FlushTxFifo(USBx , 0x10 );
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetDevAddress : Stop the usb device mode
+ * @param USBx : Selected device
+ * @param address : new device address to be assigned
+ * This parameter can be a value from 0 to 255
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address)
+{
+ USBx_DEVICE->DCFG &= ~ (USB_OTG_DCFG_DAD);
+ USBx_DEVICE->DCFG |= (address << 4) & USB_OTG_DCFG_DAD;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS ;
+ HAL_Delay(3);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS;
+ HAL_Delay(3);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ReadInterrupts: return the global USB interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t tmpreg = 0;
+
+ tmpreg = USBx->GINTSTS;
+ tmpreg &= USBx->GINTMSK;
+ return tmpreg;
+}
+
+/**
+ * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t tmpreg = 0;
+ tmpreg = USBx_DEVICE->DAINT;
+ tmpreg &= USBx_DEVICE->DAINTMSK;
+ return ((tmpreg & 0xffff0000) >> 16);
+}
+
+/**
+ * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t tmpreg = 0;
+ tmpreg = USBx_DEVICE->DAINT;
+ tmpreg &= USBx_DEVICE->DAINTMSK;
+ return ((tmpreg & 0xFFFF));
+}
+
+/**
+ * @brief Returns Device OUT EP Interrupt register
+ * @param USBx : Selected device
+ * @param epnum : endpoint number
+ * This parameter can be a value from 0 to 15
+ * @retval Device OUT EP Interrupt register
+ */
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+ uint32_t tmpreg = 0;
+ tmpreg = USBx_OUTEP(epnum)->DOEPINT;
+ tmpreg &= USBx_DEVICE->DOEPMSK;
+ return tmpreg;
+}
+
+/**
+ * @brief Returns Device IN EP Interrupt register
+ * @param USBx : Selected device
+ * @param epnum : endpoint number
+ * This parameter can be a value from 0 to 15
+ * @retval Device IN EP Interrupt register
+ */
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+ uint32_t tmpreg = 0, msk = 0, emp = 0;
+
+ msk = USBx_DEVICE->DIEPMSK;
+ emp = USBx_DEVICE->DIEPEMPMSK;
+ msk |= ((emp >> epnum) & 0x1) << 7;
+ tmpreg = USBx_INEP(epnum)->DIEPINT & msk;
+ return tmpreg;
+}
+
+/**
+ * @brief USB_ClearInterrupts: clear a USB interrupt
+ * @param USBx : Selected device
+ * @param interrupt : interrupt flag
+ * @retval None
+ */
+void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt)
+{
+ USBx->GINTSTS |= interrupt;
+}
+
+/**
+ * @brief Returns USB core mode
+ * @param USBx : Selected device
+ * @retval return core mode : Host or Device
+ * This parameter can be one of the these values:
+ * 0 : Host
+ * 1 : Device
+ */
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx)
+{
+ return ((USBx->GINTSTS ) & 0x1);
+}
+
+/**
+ * @brief Activate EP0 for Setup transactions
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx)
+{
+ /* Set the MPS of the IN EP based on the enumeration speed */
+ USBx_INEP(0)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ;
+
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+ {
+ USBx_INEP(0)->DIEPCTL |= 3;
+ }
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Prepare the EP0 to start the first control setup
+ * @param USBx : Selected device
+ * @param psetup : pointer to setup packet
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup)
+{
+ USBx_OUTEP(0)->DOEPTSIZ = 0;
+ USBx_OUTEP(0)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19));
+ USBx_OUTEP(0)->DOEPTSIZ |= (3 * 8);
+ USBx_OUTEP(0)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_HostInit : Initializes the USB OTG controller registers
+ * for Host mode
+ * @param USBx : Selected device
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ uint32_t index = 0;
+
+ /* Restart the Phy Clock */
+ USBx_PCGCCTL = 0;
+
+ /* no VBUS sensing*/
+ USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSASEN);
+ USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSBSEN);
+ USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+
+ /* Disable the FS/LS support mode only */
+ if((cfg.speed == USB_OTG_SPEED_FULL)&&
+ (USBx != USB_OTG_FS))
+ {
+ USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS;
+ }
+ else
+ {
+ USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS);
+ }
+
+ /* Make sure the FIFOs are flushed. */
+ USB_FlushTxFifo(USBx, 0x10 ); /* all Tx FIFOs */
+ USB_FlushRxFifo(USBx);
+
+ /* Clear all pending HC Interrupts */
+ for (index = 0; index < cfg.Host_channels; index++)
+ {
+ USBx_HC(index)->HCINT = 0xFFFFFFFF;
+ USBx_HC(index)->HCINTMSK = 0;
+ }
+
+ /* Enable VBUS driving */
+ USB_DriveVbus(USBx, 1);
+
+ HAL_Delay(200);
+
+ /* Disable all interrupts. */
+ USBx->GINTMSK = 0;
+
+ /* Clear any pending interrupts */
+ USBx->GINTSTS = 0xFFFFFFFF;
+
+ if(USBx == USB_OTG_FS)
+ {
+ /* set Rx FIFO size */
+ USBx->GRXFSIZ = (uint32_t )0x80;
+ USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x60 << 16)& USB_OTG_NPTXFD) | 0x80);
+ USBx->HPTXFSIZ = (uint32_t )(((0x40 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0);
+ }
+
+ /* Enable the common interrupts */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
+
+ /* Enable interrupts matching to the Host mode ONLY */
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM |\
+ USB_OTG_GINTMSK_SOFM |USB_OTG_GINTSTS_DISCINT|\
+ USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the
+ * HCFG register on the PHY type and set the right frame interval
+ * @param USBx : Selected device
+ * @param freq : clock frequency
+ * This parameter can be one of the these values:
+ * HCFG_48_MHZ : Full Speed 48 MHz Clock
+ * HCFG_6_MHZ : Low Speed 6 MHz Clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq)
+{
+ USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS);
+ USBx_HOST->HCFG |= (freq & USB_OTG_HCFG_FSLSPCS);
+
+ if (freq == HCFG_48_MHZ)
+ {
+ USBx_HOST->HFIR = (uint32_t)48000;
+ }
+ else if (freq == HCFG_6_MHZ)
+ {
+ USBx_HOST->HFIR = (uint32_t)6000;
+ }
+ return HAL_OK;
+}
+
+/**
+* @brief USB_OTG_ResetPort : Reset Host Port
+ * @param USBx : Selected device
+ * @retval HAL status
+ * @note : (1)The application must wait at least 10 ms
+ * before clearing the reset bit.
+ */
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx)
+{
+ __IO uint32_t hprt0 = 0;
+
+ hprt0 = USBx_HPRT0;
+
+ hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0);
+ HAL_Delay (10); /* See Note #1 */
+ USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0);
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DriveVbus : activate or de-activate vbus
+ * @param state : VBUS state
+ * This parameter can be one of the these values:
+ * 0 : VBUS Active
+ * 1 : VBUS Inactive
+ * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state)
+{
+ __IO uint32_t hprt0 = 0;
+
+ hprt0 = USBx_HPRT0;
+ hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ if (((hprt0 & USB_OTG_HPRT_PPWR) == 0 ) && (state == 1 ))
+ {
+ USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0);
+ }
+ if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0 ))
+ {
+ USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Return Host Core speed
+ * @param USBx : Selected device
+ * @retval speed : Host speed
+ * This parameter can be one of the these values:
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ */
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx)
+{
+ __IO uint32_t hprt0 = 0;
+
+ hprt0 = USBx_HPRT0;
+ return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17);
+}
+
+/**
+ * @brief Return Host Current Frame number
+ * @param USBx : Selected device
+ * @retval current frame number
+*/
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx)
+{
+ return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM);
+}
+
+/**
+ * @brief Initialize a host channel
+ * @param USBx : Selected device
+ * @param ch_num : Channel number
+ * This parameter can be a value from 1 to 15
+ * @param epnum : Endpoint number
+ * This parameter can be a value from 1 to 15
+ * @param dev_address : Current device address
+ * This parameter can be a value from 0 to 255
+ * @param speed : Current device speed
+ * This parameter can be one of the these values:
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ * @param ep_type : Endpoint Type
+ * This parameter can be one of the these values:
+ * @arg EP_TYPE_CTRL: Control type
+ * @arg EP_TYPE_ISOC: Isochronous type
+ * @arg EP_TYPE_BULK: Bulk type
+ * @arg EP_TYPE_INTR: Interrupt type
+ * @param mps : Max Packet Size
+ * This parameter can be a value from 0 to32K
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps)
+{
+ /* Clear old interrupt conditions for this host channel. */
+ USBx_HC(ch_num)->HCINT = 0xFFFFFFFF;
+
+ /* Enable channel interrupts required for this transfer. */
+ switch (ep_type)
+ {
+ case EP_TYPE_CTRL:
+ case EP_TYPE_BULK:
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_STALLM |\
+ USB_OTG_HCINTMSK_TXERRM |\
+ USB_OTG_HCINTMSK_DTERRM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_NAKM ;
+
+ if (epnum & 0x80)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+ }
+ break;
+
+ case EP_TYPE_INTR:
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_STALLM |\
+ USB_OTG_HCINTMSK_TXERRM |\
+ USB_OTG_HCINTMSK_DTERRM |\
+ USB_OTG_HCINTMSK_NAKM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_FRMORM ;
+
+ if (epnum & 0x80)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+ }
+
+ break;
+
+ case EP_TYPE_ISOC:
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_ACKM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_FRMORM ;
+
+ if (epnum & 0x80)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM);
+ }
+ break;
+ }
+
+ /* Enable the top level host channel interrupt. */
+ USBx_HOST->HAINTMSK |= (1 << ch_num);
+
+ /* Make sure host channel interrupts are enabled. */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM;
+
+ /* Program the HCCHAR register */
+ USBx_HC(ch_num)->HCCHAR = (((dev_address << 22) & USB_OTG_HCCHAR_DAD) |\
+ (((epnum & 0x7F)<< 11) & USB_OTG_HCCHAR_EPNUM)|\
+ ((((epnum & 0x80) == 0x80)<< 15) & USB_OTG_HCCHAR_EPDIR)|\
+ (((speed == HPRT0_PRTSPD_LOW_SPEED)<< 17) & USB_OTG_HCCHAR_LSDEV)|\
+ ((ep_type << 18) & USB_OTG_HCCHAR_EPTYP)|\
+ (mps & USB_OTG_HCCHAR_MPSIZ));
+
+ if (ep_type == EP_TYPE_INTR)
+ {
+ USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start a transfer over a host channel
+ * @param USBx : Selected device
+ * @param hc : pointer to host channel structure
+ * @retval HAL state
+ */
+#if defined (__CC_ARM) /*!< ARM Compiler */
+#pragma O0
+#elif defined (__GNUC__) /*!< GNU Compiler */
+#pragma GCC optimize ("O0")
+#endif /* __CC_ARM */
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc)
+{
+ uint8_t is_oddframe = 0;
+ uint16_t len_words = 0;
+ uint16_t num_packets = 0;
+ uint16_t max_hc_pkt_count = 256;
+
+ /* Compute the expected number of packets associated to the transfer */
+ if (hc->xfer_len > 0)
+ {
+ num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
+
+ if (num_packets > max_hc_pkt_count)
+ {
+ num_packets = max_hc_pkt_count;
+ hc->xfer_len = num_packets * hc->max_packet;
+ }
+ }
+ else
+ {
+ num_packets = 1;
+ }
+ if (hc->ep_is_in)
+ {
+ hc->xfer_len = num_packets * hc->max_packet;
+ }
+
+ /* Initialize the HCTSIZn register */
+ USBx_HC(hc->ch_num)->HCTSIZ = (((hc->xfer_len) & USB_OTG_HCTSIZ_XFRSIZ)) |\
+ ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\
+ (((hc->data_pid) << 29) & USB_OTG_HCTSIZ_DPID);
+
+ is_oddframe = (USBx_HOST->HFNUM & 0x01) ? 0 : 1;
+ USBx_HC(hc->ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM;
+ USBx_HC(hc->ch_num)->HCCHAR |= (is_oddframe << 29);
+
+ /* Set host channel enable */
+ USBx_HC(hc->ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHDIS;
+ USBx_HC(hc->ch_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+
+ if((hc->ep_is_in == 0) && (hc->xfer_len > 0))
+ {
+ switch(hc->ep_type)
+ {
+ /* Non periodic transfer */
+ case EP_TYPE_CTRL:
+ case EP_TYPE_BULK:
+ len_words = (hc->xfer_len + 3) / 4;
+
+ /* check if there is enough space in FIFO space */
+ if(len_words > (USBx->HNPTXSTS & 0xFFFF))
+ {
+ /* need to process data in nptxfempty interrupt */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM;
+ }
+ break;
+
+ /* Periodic transfer */
+ case EP_TYPE_INTR:
+ case EP_TYPE_ISOC:
+ len_words = (hc->xfer_len + 3) / 4;
+ /* check if there is enough space in FIFO space */
+ if(len_words > (USBx_HOST->HPTXSTS & 0xFFFF)) /* split the transfer */
+ {
+ /* need to process data in ptxfempty interrupt */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Write packet into the Tx FIFO. */
+ USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, hc->xfer_len);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read all host channel interrupts status
+ * @param USBx : Selected device
+ * @retval HAL state
+ */
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ return ((USBx_HOST->HAINT) & 0xFFFF);
+}
+
+/**
+ * @brief Halt a host channel
+ * @param USBx : Selected device
+ * @param hc_num : Host Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num)
+{
+ uint32_t count = 0;
+
+ /* Check for space in the request queue to issue the halt. */
+ if (((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_CTRL << 18)) || ((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_BULK << 18)))
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+
+ if ((USBx->HNPTXSTS & 0xFFFF) == 0)
+ {
+ USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
+ do
+ {
+ if (++count > 1000)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+
+ if ((USBx_HOST->HPTXSTS & 0xFFFF) == 0)
+ {
+ USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
+ do
+ {
+ if (++count > 1000)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initiate Do Ping protocol
+ * @param USBx : Selected device
+ * @param hc_num : Host Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num)
+{
+ uint8_t num_packets = 1;
+
+ USBx_HC(ch_num)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\
+ USB_OTG_HCTSIZ_DOPING;
+
+ /* Set host channel enable */
+ USBx_HC(ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHDIS;
+ USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop Host Core
+ * @param USBx : Selected device
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint8_t index;
+ uint32_t count = 0;
+ uint32_t value = 0;
+
+ USB_DisableGlobalInt(USBx);
+
+ /* Flush FIFO */
+ USB_FlushTxFifo(USBx, 0x10);
+ USB_FlushRxFifo(USBx);
+
+ /* Flush out any leftover queued requests. */
+ for (index = 0; index <= 15; index++)
+ {
+ value = USBx_HC(index)->HCCHAR;
+ value |= USB_OTG_HCCHAR_CHDIS;
+ value &= ~USB_OTG_HCCHAR_CHENA;
+ value &= ~USB_OTG_HCCHAR_EPDIR;
+ USBx_HC(index)->HCCHAR = value;
+ }
+
+ /* Halt all channels to put them into a known state. */
+ for (index = 0; index <= 15; index++)
+ {
+ value = USBx_HC(index)->HCCHAR ;
+ value |= USB_OTG_HCCHAR_CHDIS;
+ value |= USB_OTG_HCCHAR_CHENA;
+ value &= ~USB_OTG_HCCHAR_EPDIR;
+ USBx_HC(index)->HCCHAR = value;
+
+ do
+ {
+ if (++count > 1000)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(index)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+
+ /* Clear any pending Host interrupts */
+ USBx_HOST->HAINT = 0xFFFFFFFF;
+ USBx->GINTSTS = 0xFFFFFFFF;
+ USB_EnableGlobalInt(USBx);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx)
+{
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+ {
+ /* active Remote wakeup signalling */
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DeActivateRemoteWakeup : de-active remote wakeup signalling
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx)
+{
+ /* active Remote wakeup signalling */
+ USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG);
+ return HAL_OK;
+}
+
+#endif /* USB_OTG_FS */
+
+/*==============================================================================
+ USB Device FS peripheral available on STM32F102xx and STM32F103xx devices
+==============================================================================*/
+#if defined (USB)
+/**
+ * @brief Initializes the USB Core
+ * @param USBx: USB Instance
+ * @param cfg : pointer to a USB_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EnableGlobalInt
+ * Enables the controller's Global Int in the AHB Config reg
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx)
+{
+ uint32_t winterruptmask = 0;
+
+ /* Set winterruptmask variable */
+ winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \
+ | USB_CNTR_ESOFM | USB_CNTR_RESETM;
+
+ /* Set interrupt mask */
+ USBx->CNTR |= winterruptmask;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DisableGlobalInt
+ * Disable the controller's Global Int in the AHB Config reg
+ * @param USBx : Selected device
+ * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx)
+{
+ uint32_t winterruptmask = 0;
+
+ /* Set winterruptmask variable */
+ winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \
+ | USB_CNTR_ESOFM | USB_CNTR_RESETM;
+
+ /* Clear interrupt mask */
+ USBx->CNTR &= ~winterruptmask;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetCurrentMode : Set functional mode
+ * @param USBx : Selected device
+ * @param mode : current core mode
+ * This parameter can be one of the these values:
+ * @arg USB_DEVICE_MODE: Peripheral mode mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx , USB_ModeTypeDef mode)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevInit : Initializes the USB controller registers
+ * for device mode
+ * @param USBx : Selected device
+ * @param cfg : pointer to a USB_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevInit (USB_TypeDef *USBx, USB_CfgTypeDef cfg)
+{
+ /* Init Device */
+ /*CNTR_FRES = 1*/
+ USBx->CNTR = USB_CNTR_FRES;
+
+ /*CNTR_FRES = 0*/
+ USBx->CNTR = 0;
+
+ /*Clear pending interrupts*/
+ USBx->ISTR = 0;
+
+ /*Set Btable Address*/
+ USBx->BTABLE = BTABLE_ADDRESS;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_FlushTxFifo : Flush a Tx FIFO
+ * @param USBx : Selected device
+ * @param num : FIFO number
+ * This parameter can be a value from 1 to 15
+ 15 means Flush all Tx FIFOs
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_FlushTxFifo (USB_TypeDef *USBx, uint32_t num )
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_FlushRxFifo : Flush Rx FIFO
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return HAL_OK;
+}
+
+/**
+ * @brief Activate and configure an endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep)
+{
+ /* initialize Endpoint */
+ switch (ep->type)
+ {
+ case EP_TYPE_CTRL:
+ PCD_SET_EPTYPE(USBx, ep->num, USB_EP_CONTROL);
+ break;
+ case EP_TYPE_BULK:
+ PCD_SET_EPTYPE(USBx, ep->num, USB_EP_BULK);
+ break;
+ case EP_TYPE_INTR:
+ PCD_SET_EPTYPE(USBx, ep->num, USB_EP_INTERRUPT);
+ break;
+ case EP_TYPE_ISOC:
+ PCD_SET_EPTYPE(USBx, ep->num, USB_EP_ISOCHRONOUS);
+ break;
+ default:
+ break;
+ }
+
+ PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num);
+
+ if (ep->doublebuffer == 0)
+ {
+ if (ep->is_in)
+ {
+ /*Set the endpoint Transmit buffer address */
+ PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress);
+ PCD_CLEAR_TX_DTOG(USBx, ep->num);
+ /* Configure NAK status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK);
+ }
+ else
+ {
+ /*Set the endpoint Receive buffer address */
+ PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress);
+ /*Set the endpoint Receive buffer counter*/
+ PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket);
+ PCD_CLEAR_RX_DTOG(USBx, ep->num);
+ /* Configure VALID status for the Endpoint*/
+ PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
+ }
+ }
+ /*Double Buffer*/
+ else
+ {
+ /*Set the endpoint as double buffered*/
+ PCD_SET_EP_DBUF(USBx, ep->num);
+ /*Set buffer address for double buffered mode*/
+ PCD_SET_EP_DBUF_ADDR(USBx, ep->num,ep->pmaaddr0, ep->pmaaddr1);
+
+ if (ep->is_in==0)
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(USBx, ep->num);
+ PCD_CLEAR_TX_DTOG(USBx, ep->num);
+
+ /* Reset value of the data toggle bits for the endpoint out*/
+ PCD_TX_DTOG(USBx, ep->num);
+
+ PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
+ PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
+ }
+ else
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(USBx, ep->num);
+ PCD_CLEAR_TX_DTOG(USBx, ep->num);
+ PCD_RX_DTOG(USBx, ep->num);
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
+ PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief De-activate and de-initialize an endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep)
+{
+ if (ep->doublebuffer == 0)
+ {
+ if (ep->is_in)
+ {
+ PCD_CLEAR_TX_DTOG(USBx, ep->num);
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
+ }
+ else
+ {
+ PCD_CLEAR_RX_DTOG(USBx, ep->num);
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
+ }
+ }
+ /*Double Buffer*/
+ else
+ {
+ if (ep->is_in==0)
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(USBx, ep->num);
+ PCD_CLEAR_TX_DTOG(USBx, ep->num);
+
+ /* Reset value of the data toggle bits for the endpoint out*/
+ PCD_TX_DTOG(USBx, ep->num);
+
+ PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
+ PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
+ }
+ else
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(USBx, ep->num);
+ PCD_CLEAR_TX_DTOG(USBx, ep->num);
+ PCD_RX_DTOG(USBx, ep->num);
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
+ PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EPStartXfer : setup and starts a transfer over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx , USB_EPTypeDef *ep)
+{
+ uint16_t pmabuffer = 0;
+ uint32_t len = ep->xfer_len;
+
+ /* IN endpoint */
+ if (ep->is_in == 1)
+ {
+ /*Multi packet transfer*/
+ if (ep->xfer_len > ep->maxpacket)
+ {
+ len=ep->maxpacket;
+ ep->xfer_len-=len;
+ }
+ else
+ {
+ len=ep->xfer_len;
+ ep->xfer_len =0;
+ }
+
+ /* configure and validate Tx endpoint */
+ if (ep->doublebuffer == 0)
+ {
+ USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, len);
+ PCD_SET_EP_TX_CNT(USBx, ep->num, len);
+ }
+ else
+ {
+ /*Set the Double buffer counter*/
+ PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
+
+ /*Write the data to the USB endpoint*/
+ if (PCD_GET_ENDPOINT(USBx, ep->num)& USB_EP_DTOG_TX)
+ {
+ pmabuffer = ep->pmaaddr1;
+ }
+ else
+ {
+ pmabuffer = ep->pmaaddr0;
+ }
+ USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, len);
+ PCD_FreeUserBuffer(USBx, ep->num, ep->is_in);
+ }
+
+ PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID);
+ }
+ else /* OUT endpoint */
+ {
+ /* Multi packet transfer*/
+ if (ep->xfer_len > ep->maxpacket)
+ {
+ len=ep->maxpacket;
+ ep->xfer_len-=len;
+ }
+ else
+ {
+ len=ep->xfer_len;
+ ep->xfer_len =0;
+ }
+
+ /* configure and validate Rx endpoint */
+ if (ep->doublebuffer == 0)
+ {
+ /*Set RX buffer count*/
+ PCD_SET_EP_RX_CNT(USBx, ep->num, len);
+ }
+ else
+ {
+ /*Set the Double buffer counter*/
+ PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
+ }
+
+ PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated
+ * with the EP/channel
+ * @param USBx : Selected device
+ * @param src : pointer to source buffer
+ * @param ch_ep_num : endpoint or host channel number
+ * @param len : Number of bytes to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ReadPacket : read a packet from the Tx FIFO associated
+ * with the EP/channel
+ * @param USBx : Selected device
+ * @param dest : destination pointer
+ * @param len : Number of bytes to read
+ * @retval pointer to destination buffer
+ */
+void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return ((void *)NULL);
+}
+
+/**
+ * @brief USB_EPSetStall : set a stall condition over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx , USB_EPTypeDef *ep)
+{
+ if (ep->num == 0)
+ {
+ /* This macro sets STALL status for RX & TX*/
+ PCD_SET_EP_TXRX_STATUS(USBx, ep->num, USB_EP_RX_STALL, USB_EP_TX_STALL);
+ }
+ else
+ {
+ if (ep->is_in)
+ {
+ PCD_SET_EP_TX_STATUS(USBx, ep->num , USB_EP_TX_STALL);
+ }
+ else
+ {
+ PCD_SET_EP_RX_STATUS(USBx, ep->num , USB_EP_RX_STALL);
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EPClearStall : Clear a stall condition over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep)
+{
+ if (ep->is_in)
+ {
+ PCD_CLEAR_TX_DTOG(USBx, ep->num);
+ PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID);
+ }
+ else
+ {
+ PCD_CLEAR_RX_DTOG(USBx, ep->num);
+ PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_StopDevice : Stop the usb device mode
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx)
+{
+ /* disable all interrupts and force USB reset */
+ USBx->CNTR = USB_CNTR_FRES;
+
+ /* clear interrupt status register */
+ USBx->ISTR = 0;
+
+ /* switch-off device */
+ USBx->CNTR = (USB_CNTR_FRES | USB_CNTR_PDWN);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetDevAddress : Stop the usb device mode
+ * @param USBx : Selected device
+ * @param address : new device address to be assigned
+ * This parameter can be a value from 0 to 255
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_SetDevAddress (USB_TypeDef *USBx, uint8_t address)
+{
+ if(address == 0)
+ {
+ /* set device address and enable function */
+ USBx->DADDR = USB_DADDR_EF;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevConnect (USB_TypeDef *USBx)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevDisconnect (USB_TypeDef *USBx)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ReadInterrupts: return the global USB interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadInterrupts (USB_TypeDef *USBx)
+{
+ uint32_t tmpreg = 0;
+
+ tmpreg = USBx->ISTR;
+ return tmpreg;
+}
+
+/**
+ * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_TypeDef *USBx)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return (0);
+}
+
+/**
+ * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadDevAllInEpInterrupt (USB_TypeDef *USBx)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return (0);
+}
+
+/**
+ * @brief Returns Device OUT EP Interrupt register
+ * @param USBx : Selected device
+ * @param epnum : endpoint number
+ * This parameter can be a value from 0 to 15
+ * @retval Device OUT EP Interrupt register
+ */
+uint32_t USB_ReadDevOutEPInterrupt (USB_TypeDef *USBx , uint8_t epnum)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return (0);
+}
+
+/**
+ * @brief Returns Device IN EP Interrupt register
+ * @param USBx : Selected device
+ * @param epnum : endpoint number
+ * This parameter can be a value from 0 to 15
+ * @retval Device IN EP Interrupt register
+ */
+uint32_t USB_ReadDevInEPInterrupt (USB_TypeDef *USBx , uint8_t epnum)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return (0);
+}
+
+/**
+ * @brief USB_ClearInterrupts: clear a USB interrupt
+ * @param USBx : Selected device
+ * @param interrupt : interrupt flag
+ * @retval None
+ */
+void USB_ClearInterrupts (USB_TypeDef *USBx, uint32_t interrupt)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+}
+
+/**
+ * @brief Prepare the EP0 to start the first control setup
+ * @param USBx : Selected device
+ * @param psetup : pointer to setup packet
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup)
+{
+ /* NOTE : - This function is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral.
+ - This function is added to ensure compatibility across platforms.
+ */
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx)
+{
+ USBx->CNTR |= USB_CNTR_RESUME;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DeActivateRemoteWakeup : de-active remote wakeup signalling
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx)
+{
+ USBx->CNTR &= ~(USB_CNTR_RESUME);
+ return HAL_OK;
+}
+
+/**
+ * @brief Copy a buffer from user memory area to packet memory area (PMA)
+ * @param USBx : pointer to USB register.
+ * @param pbUsrBuf : pointer to user memory area.
+ * @param wPMABufAddr : address into PMA.
+ * @param wNBytes : number of bytes to be copied.
+ * @retval None
+ */
+void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+{
+ uint32_t nbytes = (wNBytes + 1) >> 1; /* nbytes = (wNBytes + 1) / 2 */
+ uint32_t index = 0, temp1 = 0, temp2 = 0;
+ uint16_t *pdwVal = NULL;
+
+ pdwVal = (uint16_t *)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400);
+ for (index = nbytes; index != 0; index--)
+ {
+ temp1 = (uint16_t) * pbUsrBuf;
+ pbUsrBuf++;
+ temp2 = temp1 | (uint16_t) * pbUsrBuf << 8;
+ *pdwVal++ = temp2;
+ pdwVal++;
+ pbUsrBuf++;
+ }
+}
+
+/**
+ * @brief Copy a buffer from user memory area to packet memory area (PMA)
+ * @param USBx : pointer to USB register.
+* @param pbUsrBuf : pointer to user memory area.
+ * @param wPMABufAddr : address into PMA.
+ * @param wNBytes : number of bytes to be copied.
+ * @retval None
+ */
+void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+{
+ uint32_t nbytes = (wNBytes + 1) >> 1;/* /2*/
+ uint32_t index = 0;
+ uint32_t *pdwVal = NULL;
+
+ pdwVal = (uint32_t *)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400);
+ for (index = nbytes; index != 0; index--)
+ {
+ *(uint16_t*)pbUsrBuf++ = *pdwVal++;
+ pbUsrBuf++;
+ }
+}
+
+#endif /* USB */
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+#if defined (USB_OTG_FS)
+/** @addtogroup USB_LL_Private_Functions
+ * @{
+ */
+/**
+ * @brief Reset the USB Core (needed after USB clock settings change)
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t count = 0;
+
+ /* Wait for AHB master IDLE state. */
+ do
+ {
+ if (++count > 200000)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0);
+
+ /* Core Soft Reset */
+ count = 0;
+ USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
+
+ do
+ {
+ if (++count > 200000)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST);
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+#endif /* USB_OTG_FS */
+
+#endif /* STM32F102x6 || STM32F102xB || */
+ /* STM32F103x6 || STM32F103xB || */
+ /* STM32F103xE || STM32F103xG || */
+ /* STM32F105xC || STM32F107xC */
+
+#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/