R1 code for micro:bit based train controller code, requires second micro:bit running rx code to operate - see https://meanderingpi.wordpress.com/ for more information

Fork of nrf51-sdk by Lancaster University

Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers nrf51_bitfields.h Source File

nrf51_bitfields.h

00001 /*
00002  * Copyright (c) Nordic Semiconductor ASA
00003  * All rights reserved.
00004  *
00005  * Redistribution and use in source and binary forms, with or without modification,
00006  * are permitted provided that the following conditions are met:
00007  *
00008  *   1. Redistributions of source code must retain the above copyright notice, this
00009  *   list of conditions and the following disclaimer.
00010  *
00011  *   2. Redistributions in binary form must reproduce the above copyright notice, this
00012  *   list of conditions and the following disclaimer in the documentation and/or
00013  *   other materials provided with the distribution.
00014  *
00015  *   3. Neither the name of Nordic Semiconductor ASA nor the names of other
00016  *   contributors to this software may be used to endorse or promote products
00017  *   derived from this software without specific prior written permission.
00018  *
00019  *
00020  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
00021  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
00022  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
00023  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
00024  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
00025  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
00026  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
00027  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
00028  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
00029  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00030  *
00031  */
00032 #ifndef __NRF51_BITS_H
00033 #define __NRF51_BITS_H
00034 
00035 /*lint ++flb "Enter library region" */
00036 
00037 /* Peripheral: AAR */
00038 /* Description: Accelerated Address Resolver. */
00039 
00040 /* Register: AAR_INTENSET */
00041 /* Description: Interrupt enable set register. */
00042 
00043 /* Bit 2 : Enable interrupt on NOTRESOLVED event. */
00044 #define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */
00045 #define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */
00046 #define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
00047 #define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
00048 #define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */
00049 
00050 /* Bit 1 : Enable interrupt on RESOLVED event. */
00051 #define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */
00052 #define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */
00053 #define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
00054 #define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
00055 #define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */
00056 
00057 /* Bit 0 : Enable interrupt on END event. */
00058 #define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */
00059 #define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */
00060 #define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
00061 #define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
00062 #define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
00063 
00064 /* Register: AAR_INTENCLR */
00065 /* Description: Interrupt enable clear register. */
00066 
00067 /* Bit 2 : Disable interrupt on NOTRESOLVED event. */
00068 #define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */
00069 #define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */
00070 #define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
00071 #define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
00072 #define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */
00073 
00074 /* Bit 1 : Disable interrupt on RESOLVED event. */
00075 #define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */
00076 #define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */
00077 #define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
00078 #define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
00079 #define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */
00080 
00081 /* Bit 0 : Disable interrupt on ENDKSGEN event. */
00082 #define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */
00083 #define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */
00084 #define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
00085 #define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
00086 #define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
00087 
00088 /* Register: AAR_STATUS */
00089 /* Description: Resolution status. */
00090 
00091 /* Bits 3..0 : The IRK used last time an address was resolved. */
00092 #define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */
00093 #define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */
00094 
00095 /* Register: AAR_ENABLE */
00096 /* Description: Enable AAR. */
00097 
00098 /* Bits 1..0 : Enable AAR. */
00099 #define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
00100 #define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
00101 #define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */
00102 #define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */
00103 
00104 /* Register: AAR_NIRK */
00105 /* Description: Number of Identity root Keys in the IRK data structure. */
00106 
00107 /* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */
00108 #define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */
00109 #define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */
00110 
00111 /* Register: AAR_POWER */
00112 /* Description: Peripheral power control. */
00113 
00114 /* Bit 0 : Peripheral power control. */
00115 #define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
00116 #define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
00117 #define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
00118 #define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
00119 
00120 
00121 /* Peripheral: ADC */
00122 /* Description: Analog to digital converter. */
00123 
00124 /* Register: ADC_INTENSET */
00125 /* Description: Interrupt enable set register. */
00126 
00127 /* Bit 0 : Enable interrupt on END event. */
00128 #define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */
00129 #define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */
00130 #define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
00131 #define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
00132 #define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
00133 
00134 /* Register: ADC_INTENCLR */
00135 /* Description: Interrupt enable clear register. */
00136 
00137 /* Bit 0 : Disable interrupt on END event. */
00138 #define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */
00139 #define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */
00140 #define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
00141 #define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
00142 #define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
00143 
00144 /* Register: ADC_BUSY */
00145 /* Description: ADC busy register. */
00146 
00147 /* Bit 0 : ADC busy register. */
00148 #define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */
00149 #define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */
00150 #define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */
00151 #define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */
00152 
00153 /* Register: ADC_ENABLE */
00154 /* Description: ADC enable. */
00155 
00156 /* Bits 1..0 : ADC enable. */
00157 #define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
00158 #define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
00159 #define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */
00160 #define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */
00161 
00162 /* Register: ADC_CONFIG */
00163 /* Description: ADC configuration register. */
00164 
00165 /* Bits 17..16 : ADC external reference pin selection. */
00166 #define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */
00167 #define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */
00168 #define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */
00169 #define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */
00170 #define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */
00171 
00172 /* Bits 15..8 : ADC analog pin selection. */
00173 #define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */
00174 #define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */
00175 #define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */
00176 #define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */
00177 #define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */
00178 #define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */
00179 #define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */
00180 #define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */
00181 #define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */
00182 #define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */
00183 #define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */
00184 
00185 /* Bits 6..5 : ADC reference selection. */
00186 #define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */
00187 #define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */
00188 #define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */
00189 #define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */
00190 #define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */
00191 #define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */
00192 
00193 /* Bits 4..2 : ADC input selection. */
00194 #define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */
00195 #define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */
00196 #define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */
00197 #define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */
00198 #define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */
00199 #define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */
00200 #define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */
00201 
00202 /* Bits 1..0 : ADC resolution. */
00203 #define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */
00204 #define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */
00205 #define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */
00206 #define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */
00207 #define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */
00208 
00209 /* Register: ADC_RESULT */
00210 /* Description: Result of ADC conversion. */
00211 
00212 /* Bits 9..0 : Result of ADC conversion. */
00213 #define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */
00214 #define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */
00215 
00216 /* Register: ADC_POWER */
00217 /* Description: Peripheral power control. */
00218 
00219 /* Bit 0 : Peripheral power control. */
00220 #define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
00221 #define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
00222 #define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
00223 #define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
00224 
00225 
00226 /* Peripheral: AMLI */
00227 /* Description: AHB Multi-Layer Interface. */
00228 
00229 /* Register: AMLI_RAMPRI_CPU0 */
00230 /* Description: Configurable priority configuration register for CPU0. */
00231 
00232 /* Bits 31..28 : Configuration field for RAM block 7. */
00233 #define AMLI_RAMPRI_CPU0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
00234 #define AMLI_RAMPRI_CPU0_RAM7_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM7_Pos) /*!< Bit mask of RAM7 field. */
00235 #define AMLI_RAMPRI_CPU0_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
00236 #define AMLI_RAMPRI_CPU0_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
00237 #define AMLI_RAMPRI_CPU0_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
00238 #define AMLI_RAMPRI_CPU0_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
00239 #define AMLI_RAMPRI_CPU0_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
00240 #define AMLI_RAMPRI_CPU0_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
00241 #define AMLI_RAMPRI_CPU0_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
00242 #define AMLI_RAMPRI_CPU0_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
00243 
00244 /* Bits 27..24 : Configuration field for RAM block 6. */
00245 #define AMLI_RAMPRI_CPU0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
00246 #define AMLI_RAMPRI_CPU0_RAM6_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM6_Pos) /*!< Bit mask of RAM6 field. */
00247 #define AMLI_RAMPRI_CPU0_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
00248 #define AMLI_RAMPRI_CPU0_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
00249 #define AMLI_RAMPRI_CPU0_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
00250 #define AMLI_RAMPRI_CPU0_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
00251 #define AMLI_RAMPRI_CPU0_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
00252 #define AMLI_RAMPRI_CPU0_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
00253 #define AMLI_RAMPRI_CPU0_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
00254 #define AMLI_RAMPRI_CPU0_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
00255 
00256 /* Bits 23..20 : Configuration field for RAM block 5. */
00257 #define AMLI_RAMPRI_CPU0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
00258 #define AMLI_RAMPRI_CPU0_RAM5_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM5_Pos) /*!< Bit mask of RAM5 field. */
00259 #define AMLI_RAMPRI_CPU0_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
00260 #define AMLI_RAMPRI_CPU0_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
00261 #define AMLI_RAMPRI_CPU0_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
00262 #define AMLI_RAMPRI_CPU0_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
00263 #define AMLI_RAMPRI_CPU0_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
00264 #define AMLI_RAMPRI_CPU0_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
00265 #define AMLI_RAMPRI_CPU0_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
00266 #define AMLI_RAMPRI_CPU0_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
00267 
00268 /* Bits 19..16 : Configuration field for RAM block 4. */
00269 #define AMLI_RAMPRI_CPU0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
00270 #define AMLI_RAMPRI_CPU0_RAM4_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM4_Pos) /*!< Bit mask of RAM4 field. */
00271 #define AMLI_RAMPRI_CPU0_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
00272 #define AMLI_RAMPRI_CPU0_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
00273 #define AMLI_RAMPRI_CPU0_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
00274 #define AMLI_RAMPRI_CPU0_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
00275 #define AMLI_RAMPRI_CPU0_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
00276 #define AMLI_RAMPRI_CPU0_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
00277 #define AMLI_RAMPRI_CPU0_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
00278 #define AMLI_RAMPRI_CPU0_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
00279 
00280 /* Bits 15..12 : Configuration field for RAM block 3. */
00281 #define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
00282 #define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */
00283 #define AMLI_RAMPRI_CPU0_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
00284 #define AMLI_RAMPRI_CPU0_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
00285 #define AMLI_RAMPRI_CPU0_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
00286 #define AMLI_RAMPRI_CPU0_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
00287 #define AMLI_RAMPRI_CPU0_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
00288 #define AMLI_RAMPRI_CPU0_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
00289 #define AMLI_RAMPRI_CPU0_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
00290 #define AMLI_RAMPRI_CPU0_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
00291 
00292 /* Bits 11..8 : Configuration field for RAM block 2. */
00293 #define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
00294 #define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */
00295 #define AMLI_RAMPRI_CPU0_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
00296 #define AMLI_RAMPRI_CPU0_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
00297 #define AMLI_RAMPRI_CPU0_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
00298 #define AMLI_RAMPRI_CPU0_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
00299 #define AMLI_RAMPRI_CPU0_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
00300 #define AMLI_RAMPRI_CPU0_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
00301 #define AMLI_RAMPRI_CPU0_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
00302 #define AMLI_RAMPRI_CPU0_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
00303 
00304 /* Bits 7..4 : Configuration field for RAM block 1. */
00305 #define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
00306 #define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */
00307 #define AMLI_RAMPRI_CPU0_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
00308 #define AMLI_RAMPRI_CPU0_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
00309 #define AMLI_RAMPRI_CPU0_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
00310 #define AMLI_RAMPRI_CPU0_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
00311 #define AMLI_RAMPRI_CPU0_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
00312 #define AMLI_RAMPRI_CPU0_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
00313 #define AMLI_RAMPRI_CPU0_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
00314 #define AMLI_RAMPRI_CPU0_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
00315 
00316 /* Bits 3..0 : Configuration field for RAM block 0. */
00317 #define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
00318 #define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */
00319 #define AMLI_RAMPRI_CPU0_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
00320 #define AMLI_RAMPRI_CPU0_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
00321 #define AMLI_RAMPRI_CPU0_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
00322 #define AMLI_RAMPRI_CPU0_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
00323 #define AMLI_RAMPRI_CPU0_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
00324 #define AMLI_RAMPRI_CPU0_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
00325 #define AMLI_RAMPRI_CPU0_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
00326 #define AMLI_RAMPRI_CPU0_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
00327 
00328 /* Register: AMLI_RAMPRI_SPIS1 */
00329 /* Description: Configurable priority configuration register for SPIS1. */
00330 
00331 /* Bits 31..28 : Configuration field for RAM block 7. */
00332 #define AMLI_RAMPRI_SPIS1_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
00333 #define AMLI_RAMPRI_SPIS1_RAM7_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM7_Pos) /*!< Bit mask of RAM7 field. */
00334 #define AMLI_RAMPRI_SPIS1_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
00335 #define AMLI_RAMPRI_SPIS1_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
00336 #define AMLI_RAMPRI_SPIS1_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
00337 #define AMLI_RAMPRI_SPIS1_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
00338 #define AMLI_RAMPRI_SPIS1_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
00339 #define AMLI_RAMPRI_SPIS1_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
00340 #define AMLI_RAMPRI_SPIS1_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
00341 #define AMLI_RAMPRI_SPIS1_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
00342 
00343 /* Bits 27..24 : Configuration field for RAM block 6. */
00344 #define AMLI_RAMPRI_SPIS1_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
00345 #define AMLI_RAMPRI_SPIS1_RAM6_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM6_Pos) /*!< Bit mask of RAM6 field. */
00346 #define AMLI_RAMPRI_SPIS1_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
00347 #define AMLI_RAMPRI_SPIS1_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
00348 #define AMLI_RAMPRI_SPIS1_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
00349 #define AMLI_RAMPRI_SPIS1_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
00350 #define AMLI_RAMPRI_SPIS1_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
00351 #define AMLI_RAMPRI_SPIS1_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
00352 #define AMLI_RAMPRI_SPIS1_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
00353 #define AMLI_RAMPRI_SPIS1_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
00354 
00355 /* Bits 23..20 : Configuration field for RAM block 5. */
00356 #define AMLI_RAMPRI_SPIS1_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
00357 #define AMLI_RAMPRI_SPIS1_RAM5_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM5_Pos) /*!< Bit mask of RAM5 field. */
00358 #define AMLI_RAMPRI_SPIS1_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
00359 #define AMLI_RAMPRI_SPIS1_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
00360 #define AMLI_RAMPRI_SPIS1_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
00361 #define AMLI_RAMPRI_SPIS1_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
00362 #define AMLI_RAMPRI_SPIS1_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
00363 #define AMLI_RAMPRI_SPIS1_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
00364 #define AMLI_RAMPRI_SPIS1_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
00365 #define AMLI_RAMPRI_SPIS1_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
00366 
00367 /* Bits 19..16 : Configuration field for RAM block 4. */
00368 #define AMLI_RAMPRI_SPIS1_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
00369 #define AMLI_RAMPRI_SPIS1_RAM4_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM4_Pos) /*!< Bit mask of RAM4 field. */
00370 #define AMLI_RAMPRI_SPIS1_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
00371 #define AMLI_RAMPRI_SPIS1_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
00372 #define AMLI_RAMPRI_SPIS1_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
00373 #define AMLI_RAMPRI_SPIS1_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
00374 #define AMLI_RAMPRI_SPIS1_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
00375 #define AMLI_RAMPRI_SPIS1_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
00376 #define AMLI_RAMPRI_SPIS1_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
00377 #define AMLI_RAMPRI_SPIS1_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
00378 
00379 /* Bits 15..12 : Configuration field for RAM block 3. */
00380 #define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
00381 #define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */
00382 #define AMLI_RAMPRI_SPIS1_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
00383 #define AMLI_RAMPRI_SPIS1_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
00384 #define AMLI_RAMPRI_SPIS1_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
00385 #define AMLI_RAMPRI_SPIS1_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
00386 #define AMLI_RAMPRI_SPIS1_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
00387 #define AMLI_RAMPRI_SPIS1_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
00388 #define AMLI_RAMPRI_SPIS1_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
00389 #define AMLI_RAMPRI_SPIS1_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
00390 
00391 /* Bits 11..8 : Configuration field for RAM block 2. */
00392 #define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
00393 #define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */
00394 #define AMLI_RAMPRI_SPIS1_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
00395 #define AMLI_RAMPRI_SPIS1_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
00396 #define AMLI_RAMPRI_SPIS1_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
00397 #define AMLI_RAMPRI_SPIS1_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
00398 #define AMLI_RAMPRI_SPIS1_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
00399 #define AMLI_RAMPRI_SPIS1_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
00400 #define AMLI_RAMPRI_SPIS1_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
00401 #define AMLI_RAMPRI_SPIS1_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
00402 
00403 /* Bits 7..4 : Configuration field for RAM block 1. */
00404 #define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
00405 #define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */
00406 #define AMLI_RAMPRI_SPIS1_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
00407 #define AMLI_RAMPRI_SPIS1_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
00408 #define AMLI_RAMPRI_SPIS1_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
00409 #define AMLI_RAMPRI_SPIS1_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
00410 #define AMLI_RAMPRI_SPIS1_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
00411 #define AMLI_RAMPRI_SPIS1_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
00412 #define AMLI_RAMPRI_SPIS1_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
00413 #define AMLI_RAMPRI_SPIS1_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
00414 
00415 /* Bits 3..0 : Configuration field for RAM block 0. */
00416 #define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
00417 #define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */
00418 #define AMLI_RAMPRI_SPIS1_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
00419 #define AMLI_RAMPRI_SPIS1_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
00420 #define AMLI_RAMPRI_SPIS1_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
00421 #define AMLI_RAMPRI_SPIS1_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
00422 #define AMLI_RAMPRI_SPIS1_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
00423 #define AMLI_RAMPRI_SPIS1_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
00424 #define AMLI_RAMPRI_SPIS1_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
00425 #define AMLI_RAMPRI_SPIS1_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
00426 
00427 /* Register: AMLI_RAMPRI_RADIO */
00428 /* Description: Configurable priority configuration register for RADIO. */
00429 
00430 /* Bits 31..28 : Configuration field for RAM block 7. */
00431 #define AMLI_RAMPRI_RADIO_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
00432 #define AMLI_RAMPRI_RADIO_RAM7_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM7_Pos) /*!< Bit mask of RAM7 field. */
00433 #define AMLI_RAMPRI_RADIO_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
00434 #define AMLI_RAMPRI_RADIO_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
00435 #define AMLI_RAMPRI_RADIO_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
00436 #define AMLI_RAMPRI_RADIO_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
00437 #define AMLI_RAMPRI_RADIO_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
00438 #define AMLI_RAMPRI_RADIO_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
00439 #define AMLI_RAMPRI_RADIO_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
00440 #define AMLI_RAMPRI_RADIO_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
00441 
00442 /* Bits 27..24 : Configuration field for RAM block 6. */
00443 #define AMLI_RAMPRI_RADIO_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
00444 #define AMLI_RAMPRI_RADIO_RAM6_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM6_Pos) /*!< Bit mask of RAM6 field. */
00445 #define AMLI_RAMPRI_RADIO_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
00446 #define AMLI_RAMPRI_RADIO_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
00447 #define AMLI_RAMPRI_RADIO_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
00448 #define AMLI_RAMPRI_RADIO_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
00449 #define AMLI_RAMPRI_RADIO_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
00450 #define AMLI_RAMPRI_RADIO_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
00451 #define AMLI_RAMPRI_RADIO_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
00452 #define AMLI_RAMPRI_RADIO_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
00453 
00454 /* Bits 23..20 : Configuration field for RAM block 5. */
00455 #define AMLI_RAMPRI_RADIO_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
00456 #define AMLI_RAMPRI_RADIO_RAM5_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM5_Pos) /*!< Bit mask of RAM5 field. */
00457 #define AMLI_RAMPRI_RADIO_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
00458 #define AMLI_RAMPRI_RADIO_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
00459 #define AMLI_RAMPRI_RADIO_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
00460 #define AMLI_RAMPRI_RADIO_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
00461 #define AMLI_RAMPRI_RADIO_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
00462 #define AMLI_RAMPRI_RADIO_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
00463 #define AMLI_RAMPRI_RADIO_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
00464 #define AMLI_RAMPRI_RADIO_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
00465 
00466 /* Bits 19..16 : Configuration field for RAM block 4. */
00467 #define AMLI_RAMPRI_RADIO_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
00468 #define AMLI_RAMPRI_RADIO_RAM4_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM4_Pos) /*!< Bit mask of RAM4 field. */
00469 #define AMLI_RAMPRI_RADIO_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
00470 #define AMLI_RAMPRI_RADIO_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
00471 #define AMLI_RAMPRI_RADIO_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
00472 #define AMLI_RAMPRI_RADIO_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
00473 #define AMLI_RAMPRI_RADIO_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
00474 #define AMLI_RAMPRI_RADIO_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
00475 #define AMLI_RAMPRI_RADIO_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
00476 #define AMLI_RAMPRI_RADIO_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
00477 
00478 /* Bits 15..12 : Configuration field for RAM block 3. */
00479 #define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
00480 #define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */
00481 #define AMLI_RAMPRI_RADIO_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
00482 #define AMLI_RAMPRI_RADIO_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
00483 #define AMLI_RAMPRI_RADIO_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
00484 #define AMLI_RAMPRI_RADIO_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
00485 #define AMLI_RAMPRI_RADIO_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
00486 #define AMLI_RAMPRI_RADIO_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
00487 #define AMLI_RAMPRI_RADIO_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
00488 #define AMLI_RAMPRI_RADIO_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
00489 
00490 /* Bits 11..8 : Configuration field for RAM block 2. */
00491 #define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
00492 #define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */
00493 #define AMLI_RAMPRI_RADIO_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
00494 #define AMLI_RAMPRI_RADIO_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
00495 #define AMLI_RAMPRI_RADIO_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
00496 #define AMLI_RAMPRI_RADIO_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
00497 #define AMLI_RAMPRI_RADIO_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
00498 #define AMLI_RAMPRI_RADIO_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
00499 #define AMLI_RAMPRI_RADIO_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
00500 #define AMLI_RAMPRI_RADIO_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
00501 
00502 /* Bits 7..4 : Configuration field for RAM block 1. */
00503 #define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
00504 #define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */
00505 #define AMLI_RAMPRI_RADIO_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
00506 #define AMLI_RAMPRI_RADIO_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
00507 #define AMLI_RAMPRI_RADIO_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
00508 #define AMLI_RAMPRI_RADIO_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
00509 #define AMLI_RAMPRI_RADIO_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
00510 #define AMLI_RAMPRI_RADIO_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
00511 #define AMLI_RAMPRI_RADIO_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
00512 #define AMLI_RAMPRI_RADIO_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
00513 
00514 /* Bits 3..0 : Configuration field for RAM block 0. */
00515 #define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
00516 #define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */
00517 #define AMLI_RAMPRI_RADIO_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
00518 #define AMLI_RAMPRI_RADIO_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
00519 #define AMLI_RAMPRI_RADIO_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
00520 #define AMLI_RAMPRI_RADIO_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
00521 #define AMLI_RAMPRI_RADIO_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
00522 #define AMLI_RAMPRI_RADIO_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
00523 #define AMLI_RAMPRI_RADIO_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
00524 #define AMLI_RAMPRI_RADIO_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
00525 
00526 /* Register: AMLI_RAMPRI_ECB */
00527 /* Description: Configurable priority configuration register for ECB. */
00528 
00529 /* Bits 31..28 : Configuration field for RAM block 7. */
00530 #define AMLI_RAMPRI_ECB_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
00531 #define AMLI_RAMPRI_ECB_RAM7_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM7_Pos) /*!< Bit mask of RAM7 field. */
00532 #define AMLI_RAMPRI_ECB_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
00533 #define AMLI_RAMPRI_ECB_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
00534 #define AMLI_RAMPRI_ECB_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
00535 #define AMLI_RAMPRI_ECB_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
00536 #define AMLI_RAMPRI_ECB_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
00537 #define AMLI_RAMPRI_ECB_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
00538 #define AMLI_RAMPRI_ECB_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
00539 #define AMLI_RAMPRI_ECB_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
00540 
00541 /* Bits 27..24 : Configuration field for RAM block 6. */
00542 #define AMLI_RAMPRI_ECB_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
00543 #define AMLI_RAMPRI_ECB_RAM6_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM6_Pos) /*!< Bit mask of RAM6 field. */
00544 #define AMLI_RAMPRI_ECB_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
00545 #define AMLI_RAMPRI_ECB_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
00546 #define AMLI_RAMPRI_ECB_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
00547 #define AMLI_RAMPRI_ECB_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
00548 #define AMLI_RAMPRI_ECB_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
00549 #define AMLI_RAMPRI_ECB_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
00550 #define AMLI_RAMPRI_ECB_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
00551 #define AMLI_RAMPRI_ECB_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
00552 
00553 /* Bits 23..20 : Configuration field for RAM block 5. */
00554 #define AMLI_RAMPRI_ECB_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
00555 #define AMLI_RAMPRI_ECB_RAM5_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM5_Pos) /*!< Bit mask of RAM5 field. */
00556 #define AMLI_RAMPRI_ECB_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
00557 #define AMLI_RAMPRI_ECB_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
00558 #define AMLI_RAMPRI_ECB_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
00559 #define AMLI_RAMPRI_ECB_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
00560 #define AMLI_RAMPRI_ECB_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
00561 #define AMLI_RAMPRI_ECB_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
00562 #define AMLI_RAMPRI_ECB_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
00563 #define AMLI_RAMPRI_ECB_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
00564 
00565 /* Bits 19..16 : Configuration field for RAM block 4. */
00566 #define AMLI_RAMPRI_ECB_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
00567 #define AMLI_RAMPRI_ECB_RAM4_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM4_Pos) /*!< Bit mask of RAM4 field. */
00568 #define AMLI_RAMPRI_ECB_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
00569 #define AMLI_RAMPRI_ECB_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
00570 #define AMLI_RAMPRI_ECB_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
00571 #define AMLI_RAMPRI_ECB_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
00572 #define AMLI_RAMPRI_ECB_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
00573 #define AMLI_RAMPRI_ECB_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
00574 #define AMLI_RAMPRI_ECB_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
00575 #define AMLI_RAMPRI_ECB_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
00576 
00577 /* Bits 15..12 : Configuration field for RAM block 3. */
00578 #define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
00579 #define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */
00580 #define AMLI_RAMPRI_ECB_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
00581 #define AMLI_RAMPRI_ECB_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
00582 #define AMLI_RAMPRI_ECB_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
00583 #define AMLI_RAMPRI_ECB_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
00584 #define AMLI_RAMPRI_ECB_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
00585 #define AMLI_RAMPRI_ECB_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
00586 #define AMLI_RAMPRI_ECB_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
00587 #define AMLI_RAMPRI_ECB_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
00588 
00589 /* Bits 11..8 : Configuration field for RAM block 2. */
00590 #define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
00591 #define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */
00592 #define AMLI_RAMPRI_ECB_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
00593 #define AMLI_RAMPRI_ECB_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
00594 #define AMLI_RAMPRI_ECB_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
00595 #define AMLI_RAMPRI_ECB_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
00596 #define AMLI_RAMPRI_ECB_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
00597 #define AMLI_RAMPRI_ECB_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
00598 #define AMLI_RAMPRI_ECB_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
00599 #define AMLI_RAMPRI_ECB_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
00600 
00601 /* Bits 7..4 : Configuration field for RAM block 1. */
00602 #define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
00603 #define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */
00604 #define AMLI_RAMPRI_ECB_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
00605 #define AMLI_RAMPRI_ECB_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
00606 #define AMLI_RAMPRI_ECB_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
00607 #define AMLI_RAMPRI_ECB_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
00608 #define AMLI_RAMPRI_ECB_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
00609 #define AMLI_RAMPRI_ECB_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
00610 #define AMLI_RAMPRI_ECB_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
00611 #define AMLI_RAMPRI_ECB_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
00612 
00613 /* Bits 3..0 : Configuration field for RAM block 0. */
00614 #define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
00615 #define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */
00616 #define AMLI_RAMPRI_ECB_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
00617 #define AMLI_RAMPRI_ECB_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
00618 #define AMLI_RAMPRI_ECB_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
00619 #define AMLI_RAMPRI_ECB_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
00620 #define AMLI_RAMPRI_ECB_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
00621 #define AMLI_RAMPRI_ECB_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
00622 #define AMLI_RAMPRI_ECB_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
00623 #define AMLI_RAMPRI_ECB_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
00624 
00625 /* Register: AMLI_RAMPRI_CCM */
00626 /* Description: Configurable priority configuration register for CCM. */
00627 
00628 /* Bits 31..28 : Configuration field for RAM block 7. */
00629 #define AMLI_RAMPRI_CCM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
00630 #define AMLI_RAMPRI_CCM_RAM7_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM7_Pos) /*!< Bit mask of RAM7 field. */
00631 #define AMLI_RAMPRI_CCM_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
00632 #define AMLI_RAMPRI_CCM_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
00633 #define AMLI_RAMPRI_CCM_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
00634 #define AMLI_RAMPRI_CCM_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
00635 #define AMLI_RAMPRI_CCM_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
00636 #define AMLI_RAMPRI_CCM_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
00637 #define AMLI_RAMPRI_CCM_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
00638 #define AMLI_RAMPRI_CCM_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
00639 
00640 /* Bits 27..24 : Configuration field for RAM block 6. */
00641 #define AMLI_RAMPRI_CCM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
00642 #define AMLI_RAMPRI_CCM_RAM6_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM6_Pos) /*!< Bit mask of RAM6 field. */
00643 #define AMLI_RAMPRI_CCM_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
00644 #define AMLI_RAMPRI_CCM_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
00645 #define AMLI_RAMPRI_CCM_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
00646 #define AMLI_RAMPRI_CCM_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
00647 #define AMLI_RAMPRI_CCM_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
00648 #define AMLI_RAMPRI_CCM_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
00649 #define AMLI_RAMPRI_CCM_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
00650 #define AMLI_RAMPRI_CCM_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
00651 
00652 /* Bits 23..20 : Configuration field for RAM block 5. */
00653 #define AMLI_RAMPRI_CCM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
00654 #define AMLI_RAMPRI_CCM_RAM5_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM5_Pos) /*!< Bit mask of RAM5 field. */
00655 #define AMLI_RAMPRI_CCM_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
00656 #define AMLI_RAMPRI_CCM_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
00657 #define AMLI_RAMPRI_CCM_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
00658 #define AMLI_RAMPRI_CCM_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
00659 #define AMLI_RAMPRI_CCM_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
00660 #define AMLI_RAMPRI_CCM_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
00661 #define AMLI_RAMPRI_CCM_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
00662 #define AMLI_RAMPRI_CCM_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
00663 
00664 /* Bits 19..16 : Configuration field for RAM block 4. */
00665 #define AMLI_RAMPRI_CCM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
00666 #define AMLI_RAMPRI_CCM_RAM4_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM4_Pos) /*!< Bit mask of RAM4 field. */
00667 #define AMLI_RAMPRI_CCM_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
00668 #define AMLI_RAMPRI_CCM_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
00669 #define AMLI_RAMPRI_CCM_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
00670 #define AMLI_RAMPRI_CCM_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
00671 #define AMLI_RAMPRI_CCM_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
00672 #define AMLI_RAMPRI_CCM_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
00673 #define AMLI_RAMPRI_CCM_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
00674 #define AMLI_RAMPRI_CCM_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
00675 
00676 /* Bits 15..12 : Configuration field for RAM block 3. */
00677 #define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
00678 #define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */
00679 #define AMLI_RAMPRI_CCM_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
00680 #define AMLI_RAMPRI_CCM_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
00681 #define AMLI_RAMPRI_CCM_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
00682 #define AMLI_RAMPRI_CCM_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
00683 #define AMLI_RAMPRI_CCM_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
00684 #define AMLI_RAMPRI_CCM_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
00685 #define AMLI_RAMPRI_CCM_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
00686 #define AMLI_RAMPRI_CCM_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
00687 
00688 /* Bits 11..8 : Configuration field for RAM block 2. */
00689 #define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
00690 #define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */
00691 #define AMLI_RAMPRI_CCM_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
00692 #define AMLI_RAMPRI_CCM_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
00693 #define AMLI_RAMPRI_CCM_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
00694 #define AMLI_RAMPRI_CCM_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
00695 #define AMLI_RAMPRI_CCM_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
00696 #define AMLI_RAMPRI_CCM_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
00697 #define AMLI_RAMPRI_CCM_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
00698 #define AMLI_RAMPRI_CCM_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
00699 
00700 /* Bits 7..4 : Configuration field for RAM block 1. */
00701 #define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
00702 #define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */
00703 #define AMLI_RAMPRI_CCM_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
00704 #define AMLI_RAMPRI_CCM_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
00705 #define AMLI_RAMPRI_CCM_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
00706 #define AMLI_RAMPRI_CCM_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
00707 #define AMLI_RAMPRI_CCM_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
00708 #define AMLI_RAMPRI_CCM_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
00709 #define AMLI_RAMPRI_CCM_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
00710 #define AMLI_RAMPRI_CCM_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
00711 
00712 /* Bits 3..0 : Configuration field for RAM block 0. */
00713 #define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
00714 #define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */
00715 #define AMLI_RAMPRI_CCM_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
00716 #define AMLI_RAMPRI_CCM_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
00717 #define AMLI_RAMPRI_CCM_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
00718 #define AMLI_RAMPRI_CCM_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
00719 #define AMLI_RAMPRI_CCM_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
00720 #define AMLI_RAMPRI_CCM_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
00721 #define AMLI_RAMPRI_CCM_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
00722 #define AMLI_RAMPRI_CCM_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
00723 
00724 /* Register: AMLI_RAMPRI_AAR */
00725 /* Description: Configurable priority configuration register for AAR. */
00726 
00727 /* Bits 31..28 : Configuration field for RAM block 7. */
00728 #define AMLI_RAMPRI_AAR_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
00729 #define AMLI_RAMPRI_AAR_RAM7_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM7_Pos) /*!< Bit mask of RAM7 field. */
00730 #define AMLI_RAMPRI_AAR_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
00731 #define AMLI_RAMPRI_AAR_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
00732 #define AMLI_RAMPRI_AAR_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
00733 #define AMLI_RAMPRI_AAR_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
00734 #define AMLI_RAMPRI_AAR_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
00735 #define AMLI_RAMPRI_AAR_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
00736 #define AMLI_RAMPRI_AAR_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
00737 #define AMLI_RAMPRI_AAR_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
00738 
00739 /* Bits 27..24 : Configuration field for RAM block 6. */
00740 #define AMLI_RAMPRI_AAR_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
00741 #define AMLI_RAMPRI_AAR_RAM6_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM6_Pos) /*!< Bit mask of RAM6 field. */
00742 #define AMLI_RAMPRI_AAR_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
00743 #define AMLI_RAMPRI_AAR_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
00744 #define AMLI_RAMPRI_AAR_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
00745 #define AMLI_RAMPRI_AAR_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
00746 #define AMLI_RAMPRI_AAR_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
00747 #define AMLI_RAMPRI_AAR_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
00748 #define AMLI_RAMPRI_AAR_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
00749 #define AMLI_RAMPRI_AAR_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
00750 
00751 /* Bits 23..20 : Configuration field for RAM block 5. */
00752 #define AMLI_RAMPRI_AAR_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
00753 #define AMLI_RAMPRI_AAR_RAM5_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM5_Pos) /*!< Bit mask of RAM5 field. */
00754 #define AMLI_RAMPRI_AAR_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
00755 #define AMLI_RAMPRI_AAR_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
00756 #define AMLI_RAMPRI_AAR_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
00757 #define AMLI_RAMPRI_AAR_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
00758 #define AMLI_RAMPRI_AAR_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
00759 #define AMLI_RAMPRI_AAR_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
00760 #define AMLI_RAMPRI_AAR_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
00761 #define AMLI_RAMPRI_AAR_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
00762 
00763 /* Bits 19..16 : Configuration field for RAM block 4. */
00764 #define AMLI_RAMPRI_AAR_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
00765 #define AMLI_RAMPRI_AAR_RAM4_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM4_Pos) /*!< Bit mask of RAM4 field. */
00766 #define AMLI_RAMPRI_AAR_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
00767 #define AMLI_RAMPRI_AAR_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
00768 #define AMLI_RAMPRI_AAR_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
00769 #define AMLI_RAMPRI_AAR_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
00770 #define AMLI_RAMPRI_AAR_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
00771 #define AMLI_RAMPRI_AAR_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
00772 #define AMLI_RAMPRI_AAR_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
00773 #define AMLI_RAMPRI_AAR_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
00774 
00775 /* Bits 15..12 : Configuration field for RAM block 3. */
00776 #define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
00777 #define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */
00778 #define AMLI_RAMPRI_AAR_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
00779 #define AMLI_RAMPRI_AAR_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
00780 #define AMLI_RAMPRI_AAR_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
00781 #define AMLI_RAMPRI_AAR_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
00782 #define AMLI_RAMPRI_AAR_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
00783 #define AMLI_RAMPRI_AAR_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
00784 #define AMLI_RAMPRI_AAR_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
00785 #define AMLI_RAMPRI_AAR_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
00786 
00787 /* Bits 11..8 : Configuration field for RAM block 2. */
00788 #define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
00789 #define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */
00790 #define AMLI_RAMPRI_AAR_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
00791 #define AMLI_RAMPRI_AAR_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
00792 #define AMLI_RAMPRI_AAR_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
00793 #define AMLI_RAMPRI_AAR_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
00794 #define AMLI_RAMPRI_AAR_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
00795 #define AMLI_RAMPRI_AAR_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
00796 #define AMLI_RAMPRI_AAR_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
00797 #define AMLI_RAMPRI_AAR_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
00798 
00799 /* Bits 7..4 : Configuration field for RAM block 1. */
00800 #define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
00801 #define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */
00802 #define AMLI_RAMPRI_AAR_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
00803 #define AMLI_RAMPRI_AAR_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
00804 #define AMLI_RAMPRI_AAR_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
00805 #define AMLI_RAMPRI_AAR_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
00806 #define AMLI_RAMPRI_AAR_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
00807 #define AMLI_RAMPRI_AAR_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
00808 #define AMLI_RAMPRI_AAR_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
00809 #define AMLI_RAMPRI_AAR_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
00810 
00811 /* Bits 3..0 : Configuration field for RAM block 0. */
00812 #define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
00813 #define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */
00814 #define AMLI_RAMPRI_AAR_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
00815 #define AMLI_RAMPRI_AAR_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
00816 #define AMLI_RAMPRI_AAR_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
00817 #define AMLI_RAMPRI_AAR_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
00818 #define AMLI_RAMPRI_AAR_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
00819 #define AMLI_RAMPRI_AAR_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
00820 #define AMLI_RAMPRI_AAR_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
00821 #define AMLI_RAMPRI_AAR_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
00822 
00823 
00824 /* Peripheral: CCM */
00825 /* Description: AES CCM Mode Encryption. */
00826 
00827 /* Register: CCM_SHORTS */
00828 /* Description: Shortcuts for the CCM. */
00829 
00830 /* Bit 0 : Shortcut between ENDKSGEN event and CRYPT task. */
00831 #define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */
00832 #define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */
00833 #define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */
00834 #define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */
00835 
00836 /* Register: CCM_INTENSET */
00837 /* Description: Interrupt enable set register. */
00838 
00839 /* Bit 2 : Enable interrupt on ERROR event. */
00840 #define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */
00841 #define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
00842 #define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
00843 #define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
00844 #define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */
00845 
00846 /* Bit 1 : Enable interrupt on ENDCRYPT event. */
00847 #define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */
00848 #define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */
00849 #define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */
00850 #define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */
00851 #define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */
00852 
00853 /* Bit 0 : Enable interrupt on ENDKSGEN event. */
00854 #define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */
00855 #define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */
00856 #define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */
00857 #define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */
00858 #define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */
00859 
00860 /* Register: CCM_INTENCLR */
00861 /* Description: Interrupt enable clear register. */
00862 
00863 /* Bit 2 : Disable interrupt on ERROR event. */
00864 #define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */
00865 #define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
00866 #define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
00867 #define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
00868 #define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */
00869 
00870 /* Bit 1 : Disable interrupt on ENDCRYPT event. */
00871 #define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */
00872 #define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */
00873 #define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */
00874 #define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */
00875 #define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */
00876 
00877 /* Bit 0 : Disable interrupt on ENDKSGEN event. */
00878 #define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */
00879 #define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */
00880 #define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */
00881 #define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */
00882 #define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */
00883 
00884 /* Register: CCM_MICSTATUS */
00885 /* Description: CCM RX MIC check result. */
00886 
00887 /* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */
00888 #define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */
00889 #define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */
00890 #define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */
00891 #define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */
00892 
00893 /* Register: CCM_ENABLE */
00894 /* Description: CCM enable. */
00895 
00896 /* Bits 1..0 : CCM enable. */
00897 #define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
00898 #define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
00899 #define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */
00900 #define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */
00901 
00902 /* Register: CCM_MODE */
00903 /* Description: Operation mode. */
00904 
00905 /* Bit 0 : CCM mode operation. */
00906 #define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
00907 #define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
00908 #define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */
00909 #define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */
00910 
00911 /* Register: CCM_POWER */
00912 /* Description: Peripheral power control. */
00913 
00914 /* Bit 0 : Peripheral power control. */
00915 #define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
00916 #define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
00917 #define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
00918 #define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
00919 
00920 
00921 /* Peripheral: CLOCK */
00922 /* Description: Clock control. */
00923 
00924 /* Register: CLOCK_INTENSET */
00925 /* Description: Interrupt enable set register. */
00926 
00927 /* Bit 4 : Enable interrupt on CTTO event. */
00928 #define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */
00929 #define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */
00930 #define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */
00931 #define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */
00932 #define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */
00933 
00934 /* Bit 3 : Enable interrupt on DONE event. */
00935 #define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */
00936 #define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */
00937 #define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */
00938 #define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */
00939 #define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */
00940 
00941 /* Bit 1 : Enable interrupt on LFCLKSTARTED event. */
00942 #define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */
00943 #define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */
00944 #define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
00945 #define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
00946 #define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */
00947 
00948 /* Bit 0 : Enable interrupt on HFCLKSTARTED event. */
00949 #define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */
00950 #define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */
00951 #define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
00952 #define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
00953 #define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */
00954 
00955 /* Register: CLOCK_INTENCLR */
00956 /* Description: Interrupt enable clear register. */
00957 
00958 /* Bit 4 : Disable interrupt on CTTO event. */
00959 #define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */
00960 #define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */
00961 #define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */
00962 #define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */
00963 #define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */
00964 
00965 /* Bit 3 : Disable interrupt on DONE event. */
00966 #define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */
00967 #define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */
00968 #define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */
00969 #define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */
00970 #define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */
00971 
00972 /* Bit 1 : Disable interrupt on LFCLKSTARTED event. */
00973 #define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */
00974 #define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */
00975 #define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
00976 #define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
00977 #define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */
00978 
00979 /* Bit 0 : Disable interrupt on HFCLKSTARTED event. */
00980 #define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */
00981 #define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */
00982 #define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
00983 #define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
00984 #define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */
00985 
00986 /* Register: CLOCK_HFCLKRUN */
00987 /* Description: Task HFCLKSTART trigger status. */
00988 
00989 /* Bit 0 : Task HFCLKSTART trigger status. */
00990 #define CLOCK_HFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */
00991 #define CLOCK_HFCLKRUN_STATUS_Msk (0x1UL << CLOCK_HFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */
00992 #define CLOCK_HFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task HFCLKSTART has not been triggered. */
00993 #define CLOCK_HFCLKRUN_STATUS_Triggered (1UL) /*!< Task HFCLKSTART has been triggered. */
00994 
00995 /* Register: CLOCK_HFCLKSTAT */
00996 /* Description: High frequency clock status. */
00997 
00998 /* Bit 16 : State for the HFCLK. */
00999 #define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */
01000 #define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */
01001 #define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */
01002 #define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */
01003 
01004 /* Bit 0 : Active clock source for the HF clock. */
01005 #define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */
01006 #define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */
01007 #define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */
01008 #define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */
01009 
01010 /* Register: CLOCK_LFCLKRUN */
01011 /* Description: Task LFCLKSTART triggered status. */
01012 
01013 /* Bit 0 : Task LFCLKSTART triggered status. */
01014 #define CLOCK_LFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */
01015 #define CLOCK_LFCLKRUN_STATUS_Msk (0x1UL << CLOCK_LFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */
01016 #define CLOCK_LFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task LFCLKSTART has not been triggered. */
01017 #define CLOCK_LFCLKRUN_STATUS_Triggered (1UL) /*!< Task LFCLKSTART has been triggered. */
01018 
01019 /* Register: CLOCK_LFCLKSTAT */
01020 /* Description: Low frequency clock status. */
01021 
01022 /* Bit 16 : State for the LF clock. */
01023 #define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */
01024 #define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */
01025 #define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */
01026 #define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */
01027 
01028 /* Bits 1..0 : Active clock source for the LF clock. */
01029 #define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */
01030 #define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */
01031 #define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */
01032 #define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */
01033 #define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */
01034 
01035 /* Register: CLOCK_LFCLKSRCCOPY */
01036 /* Description: Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */
01037 
01038 /* Bits 1..0 : Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */
01039 #define CLOCK_LFCLKSRCCOPY_SRC_Pos (0UL) /*!< Position of SRC field. */
01040 #define CLOCK_LFCLKSRCCOPY_SRC_Msk (0x3UL << CLOCK_LFCLKSRCCOPY_SRC_Pos) /*!< Bit mask of SRC field. */
01041 #define CLOCK_LFCLKSRCCOPY_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */
01042 #define CLOCK_LFCLKSRCCOPY_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */
01043 #define CLOCK_LFCLKSRCCOPY_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */
01044 
01045 /* Register: CLOCK_LFCLKSRC */
01046 /* Description: Clock source for the LFCLK clock. */
01047 
01048 /* Bits 1..0 : Clock source. */
01049 #define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */
01050 #define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */
01051 #define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */
01052 #define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */
01053 #define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */
01054 
01055 /* Register: CLOCK_CTIV */
01056 /* Description: Calibration timer interval. */
01057 
01058 /* Bits 6..0 : Calibration timer interval in 0.25s resolution. */
01059 #define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */
01060 #define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */
01061 
01062 /* Register: CLOCK_XTALFREQ */
01063 /* Description: Crystal frequency. */
01064 
01065 /* Bits 7..0 : External Xtal frequency selection. */
01066 #define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */
01067 #define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */
01068 #define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used as source for the HFCLK oscillator. */
01069 #define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used as source for the HFCLK oscillator. */
01070 
01071 
01072 /* Peripheral: ECB */
01073 /* Description: AES ECB Mode Encryption. */
01074 
01075 /* Register: ECB_INTENSET */
01076 /* Description: Interrupt enable set register. */
01077 
01078 /* Bit 1 : Enable interrupt on ERRORECB event. */
01079 #define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */
01080 #define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */
01081 #define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */
01082 #define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */
01083 #define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */
01084 
01085 /* Bit 0 : Enable interrupt on ENDECB event. */
01086 #define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */
01087 #define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */
01088 #define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */
01089 #define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */
01090 #define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */
01091 
01092 /* Register: ECB_INTENCLR */
01093 /* Description: Interrupt enable clear register. */
01094 
01095 /* Bit 1 : Disable interrupt on ERRORECB event. */
01096 #define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */
01097 #define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */
01098 #define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */
01099 #define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */
01100 #define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */
01101 
01102 /* Bit 0 : Disable interrupt on ENDECB event. */
01103 #define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */
01104 #define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */
01105 #define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */
01106 #define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */
01107 #define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */
01108 
01109 /* Register: ECB_POWER */
01110 /* Description: Peripheral power control. */
01111 
01112 /* Bit 0 : Peripheral power control. */
01113 #define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
01114 #define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
01115 #define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
01116 #define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
01117 
01118 
01119 /* Peripheral: FICR */
01120 /* Description: Factory Information Configuration. */
01121 
01122 /* Register: FICR_PPFC */
01123 /* Description: Pre-programmed factory code present. */
01124 
01125 /* Bits 7..0 : Pre-programmed factory code present. */
01126 #define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */
01127 #define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */
01128 #define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */
01129 #define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */
01130 
01131 /* Register: FICR_CONFIGID */
01132 /* Description: Configuration identifier. */
01133 
01134 /* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */
01135 #define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */
01136 #define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */
01137 
01138 /* Bits 15..0 : Hardware Identification Number. */
01139 #define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */
01140 #define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */
01141 
01142 /* Register: FICR_DEVICEADDRTYPE */
01143 /* Description: Device address type. */
01144 
01145 /* Bit 0 : Device address type. */
01146 #define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */
01147 #define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */
01148 #define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */
01149 #define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */
01150 
01151 /* Register: FICR_OVERRIDEEN */
01152 /* Description: Radio calibration override enable. */
01153 
01154 /* Bit 3 : Override default values for BLE_1Mbit mode. */
01155 #define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */
01156 #define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */
01157 #define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */
01158 #define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */
01159 
01160 /* Bit 0 : Override default values for NRF_1Mbit mode. */
01161 #define FICR_OVERRIDEEN_NRF_1MBIT_Pos (0UL) /*!< Position of NRF_1MBIT field. */
01162 #define FICR_OVERRIDEEN_NRF_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_NRF_1MBIT_Pos) /*!< Bit mask of NRF_1MBIT field. */
01163 #define FICR_OVERRIDEEN_NRF_1MBIT_Override (0UL) /*!< Override the default values for NRF_1Mbit mode. */
01164 #define FICR_OVERRIDEEN_NRF_1MBIT_NotOverride (1UL) /*!< Do not override the default values for NRF_1Mbit mode. */
01165 
01166 
01167 /* Peripheral: GPIO */
01168 /* Description: General purpose input and output. */
01169 
01170 /* Register: GPIO_OUT */
01171 /* Description: Write GPIO port. */
01172 
01173 /* Bit 31 : Pin 31. */
01174 #define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
01175 #define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */
01176 #define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */
01177 #define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */
01178 
01179 /* Bit 30 : Pin 30. */
01180 #define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
01181 #define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */
01182 #define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */
01183 #define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */
01184 
01185 /* Bit 29 : Pin 29. */
01186 #define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
01187 #define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */
01188 #define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */
01189 #define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */
01190 
01191 /* Bit 28 : Pin 28. */
01192 #define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
01193 #define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */
01194 #define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */
01195 #define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */
01196 
01197 /* Bit 27 : Pin 27. */
01198 #define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
01199 #define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */
01200 #define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */
01201 #define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */
01202 
01203 /* Bit 26 : Pin 26. */
01204 #define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
01205 #define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */
01206 #define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */
01207 #define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */
01208 
01209 /* Bit 25 : Pin 25. */
01210 #define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
01211 #define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */
01212 #define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */
01213 #define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */
01214 
01215 /* Bit 24 : Pin 24. */
01216 #define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
01217 #define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */
01218 #define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */
01219 #define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */
01220 
01221 /* Bit 23 : Pin 23. */
01222 #define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
01223 #define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */
01224 #define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */
01225 #define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */
01226 
01227 /* Bit 22 : Pin 22. */
01228 #define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
01229 #define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */
01230 #define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */
01231 #define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */
01232 
01233 /* Bit 21 : Pin 21. */
01234 #define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
01235 #define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */
01236 #define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */
01237 #define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */
01238 
01239 /* Bit 20 : Pin 20. */
01240 #define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
01241 #define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */
01242 #define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */
01243 #define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */
01244 
01245 /* Bit 19 : Pin 19. */
01246 #define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
01247 #define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */
01248 #define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */
01249 #define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */
01250 
01251 /* Bit 18 : Pin 18. */
01252 #define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
01253 #define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */
01254 #define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */
01255 #define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */
01256 
01257 /* Bit 17 : Pin 17. */
01258 #define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
01259 #define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */
01260 #define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */
01261 #define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */
01262 
01263 /* Bit 16 : Pin 16. */
01264 #define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
01265 #define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */
01266 #define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */
01267 #define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */
01268 
01269 /* Bit 15 : Pin 15. */
01270 #define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
01271 #define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */
01272 #define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */
01273 #define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */
01274 
01275 /* Bit 14 : Pin 14. */
01276 #define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
01277 #define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */
01278 #define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */
01279 #define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */
01280 
01281 /* Bit 13 : Pin 13. */
01282 #define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
01283 #define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */
01284 #define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */
01285 #define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */
01286 
01287 /* Bit 12 : Pin 12. */
01288 #define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
01289 #define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */
01290 #define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */
01291 #define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */
01292 
01293 /* Bit 11 : Pin 11. */
01294 #define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
01295 #define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */
01296 #define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */
01297 #define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */
01298 
01299 /* Bit 10 : Pin 10. */
01300 #define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
01301 #define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */
01302 #define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */
01303 #define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */
01304 
01305 /* Bit 9 : Pin 9. */
01306 #define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
01307 #define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */
01308 #define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */
01309 #define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */
01310 
01311 /* Bit 8 : Pin 8. */
01312 #define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
01313 #define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */
01314 #define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */
01315 #define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */
01316 
01317 /* Bit 7 : Pin 7. */
01318 #define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
01319 #define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */
01320 #define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */
01321 #define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */
01322 
01323 /* Bit 6 : Pin 6. */
01324 #define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
01325 #define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */
01326 #define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */
01327 #define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */
01328 
01329 /* Bit 5 : Pin 5. */
01330 #define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
01331 #define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */
01332 #define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */
01333 #define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */
01334 
01335 /* Bit 4 : Pin 4. */
01336 #define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
01337 #define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */
01338 #define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */
01339 #define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */
01340 
01341 /* Bit 3 : Pin 3. */
01342 #define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
01343 #define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */
01344 #define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */
01345 #define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */
01346 
01347 /* Bit 2 : Pin 2. */
01348 #define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
01349 #define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */
01350 #define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */
01351 #define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */
01352 
01353 /* Bit 1 : Pin 1. */
01354 #define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
01355 #define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */
01356 #define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */
01357 #define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */
01358 
01359 /* Bit 0 : Pin 0. */
01360 #define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
01361 #define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */
01362 #define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */
01363 #define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */
01364 
01365 /* Register: GPIO_OUTSET */
01366 /* Description: Set individual bits in GPIO port. */
01367 
01368 /* Bit 31 : Pin 31. */
01369 #define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
01370 #define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */
01371 #define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */
01372 #define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */
01373 #define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */
01374 
01375 /* Bit 30 : Pin 30. */
01376 #define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
01377 #define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */
01378 #define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */
01379 #define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */
01380 #define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */
01381 
01382 /* Bit 29 : Pin 29. */
01383 #define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
01384 #define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */
01385 #define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */
01386 #define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */
01387 #define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */
01388 
01389 /* Bit 28 : Pin 28. */
01390 #define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
01391 #define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */
01392 #define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */
01393 #define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */
01394 #define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */
01395 
01396 /* Bit 27 : Pin 27. */
01397 #define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
01398 #define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */
01399 #define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */
01400 #define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */
01401 #define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */
01402 
01403 /* Bit 26 : Pin 26. */
01404 #define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
01405 #define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */
01406 #define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */
01407 #define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */
01408 #define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */
01409 
01410 /* Bit 25 : Pin 25. */
01411 #define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
01412 #define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */
01413 #define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */
01414 #define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */
01415 #define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */
01416 
01417 /* Bit 24 : Pin 24. */
01418 #define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
01419 #define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */
01420 #define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */
01421 #define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */
01422 #define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */
01423 
01424 /* Bit 23 : Pin 23. */
01425 #define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
01426 #define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */
01427 #define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */
01428 #define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */
01429 #define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */
01430 
01431 /* Bit 22 : Pin 22. */
01432 #define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
01433 #define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */
01434 #define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */
01435 #define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */
01436 #define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */
01437 
01438 /* Bit 21 : Pin 21. */
01439 #define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
01440 #define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */
01441 #define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */
01442 #define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */
01443 #define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */
01444 
01445 /* Bit 20 : Pin 20. */
01446 #define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
01447 #define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */
01448 #define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */
01449 #define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */
01450 #define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */
01451 
01452 /* Bit 19 : Pin 19. */
01453 #define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
01454 #define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */
01455 #define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */
01456 #define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */
01457 #define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */
01458 
01459 /* Bit 18 : Pin 18. */
01460 #define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
01461 #define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */
01462 #define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */
01463 #define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */
01464 #define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */
01465 
01466 /* Bit 17 : Pin 17. */
01467 #define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
01468 #define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */
01469 #define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */
01470 #define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */
01471 #define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */
01472 
01473 /* Bit 16 : Pin 16. */
01474 #define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
01475 #define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */
01476 #define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */
01477 #define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */
01478 #define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */
01479 
01480 /* Bit 15 : Pin 15. */
01481 #define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
01482 #define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */
01483 #define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */
01484 #define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */
01485 #define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */
01486 
01487 /* Bit 14 : Pin 14. */
01488 #define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
01489 #define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */
01490 #define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */
01491 #define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */
01492 #define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */
01493 
01494 /* Bit 13 : Pin 13. */
01495 #define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
01496 #define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */
01497 #define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */
01498 #define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */
01499 #define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */
01500 
01501 /* Bit 12 : Pin 12. */
01502 #define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
01503 #define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */
01504 #define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */
01505 #define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */
01506 #define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */
01507 
01508 /* Bit 11 : Pin 11. */
01509 #define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
01510 #define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */
01511 #define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */
01512 #define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */
01513 #define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */
01514 
01515 /* Bit 10 : Pin 10. */
01516 #define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
01517 #define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */
01518 #define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */
01519 #define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */
01520 #define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */
01521 
01522 /* Bit 9 : Pin 9. */
01523 #define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
01524 #define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */
01525 #define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */
01526 #define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */
01527 #define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */
01528 
01529 /* Bit 8 : Pin 8. */
01530 #define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
01531 #define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */
01532 #define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */
01533 #define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */
01534 #define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */
01535 
01536 /* Bit 7 : Pin 7. */
01537 #define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
01538 #define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */
01539 #define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */
01540 #define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */
01541 #define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */
01542 
01543 /* Bit 6 : Pin 6. */
01544 #define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
01545 #define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */
01546 #define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */
01547 #define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */
01548 #define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */
01549 
01550 /* Bit 5 : Pin 5. */
01551 #define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
01552 #define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */
01553 #define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */
01554 #define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */
01555 #define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */
01556 
01557 /* Bit 4 : Pin 4. */
01558 #define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
01559 #define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */
01560 #define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */
01561 #define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */
01562 #define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */
01563 
01564 /* Bit 3 : Pin 3. */
01565 #define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
01566 #define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */
01567 #define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */
01568 #define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */
01569 #define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */
01570 
01571 /* Bit 2 : Pin 2. */
01572 #define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
01573 #define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */
01574 #define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */
01575 #define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */
01576 #define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */
01577 
01578 /* Bit 1 : Pin 1. */
01579 #define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
01580 #define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */
01581 #define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */
01582 #define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */
01583 #define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */
01584 
01585 /* Bit 0 : Pin 0. */
01586 #define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
01587 #define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */
01588 #define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */
01589 #define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */
01590 #define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */
01591 
01592 /* Register: GPIO_OUTCLR */
01593 /* Description: Clear individual bits in GPIO port. */
01594 
01595 /* Bit 31 : Pin 31. */
01596 #define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
01597 #define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
01598 #define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */
01599 #define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */
01600 #define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */
01601 
01602 /* Bit 30 : Pin 30. */
01603 #define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
01604 #define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
01605 #define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */
01606 #define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */
01607 #define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */
01608 
01609 /* Bit 29 : Pin 29. */
01610 #define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
01611 #define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
01612 #define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */
01613 #define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */
01614 #define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */
01615 
01616 /* Bit 28 : Pin 28. */
01617 #define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
01618 #define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
01619 #define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */
01620 #define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */
01621 #define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */
01622 
01623 /* Bit 27 : Pin 27. */
01624 #define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
01625 #define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
01626 #define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */
01627 #define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */
01628 #define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */
01629 
01630 /* Bit 26 : Pin 26. */
01631 #define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
01632 #define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
01633 #define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */
01634 #define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */
01635 #define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */
01636 
01637 /* Bit 25 : Pin 25. */
01638 #define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
01639 #define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
01640 #define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */
01641 #define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */
01642 #define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */
01643 
01644 /* Bit 24 : Pin 24. */
01645 #define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
01646 #define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
01647 #define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */
01648 #define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */
01649 #define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */
01650 
01651 /* Bit 23 : Pin 23. */
01652 #define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
01653 #define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
01654 #define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */
01655 #define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */
01656 #define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */
01657 
01658 /* Bit 22 : Pin 22. */
01659 #define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
01660 #define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
01661 #define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */
01662 #define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */
01663 #define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */
01664 
01665 /* Bit 21 : Pin 21. */
01666 #define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
01667 #define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
01668 #define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */
01669 #define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */
01670 #define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */
01671 
01672 /* Bit 20 : Pin 20. */
01673 #define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
01674 #define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
01675 #define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */
01676 #define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */
01677 #define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */
01678 
01679 /* Bit 19 : Pin 19. */
01680 #define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
01681 #define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
01682 #define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */
01683 #define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */
01684 #define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */
01685 
01686 /* Bit 18 : Pin 18. */
01687 #define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
01688 #define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
01689 #define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */
01690 #define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */
01691 #define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */
01692 
01693 /* Bit 17 : Pin 17. */
01694 #define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
01695 #define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
01696 #define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */
01697 #define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */
01698 #define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */
01699 
01700 /* Bit 16 : Pin 16. */
01701 #define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
01702 #define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
01703 #define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */
01704 #define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */
01705 #define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */
01706 
01707 /* Bit 15 : Pin 15. */
01708 #define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
01709 #define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
01710 #define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */
01711 #define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */
01712 #define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */
01713 
01714 /* Bit 14 : Pin 14. */
01715 #define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
01716 #define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
01717 #define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */
01718 #define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */
01719 #define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */
01720 
01721 /* Bit 13 : Pin 13. */
01722 #define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
01723 #define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
01724 #define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */
01725 #define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */
01726 #define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */
01727 
01728 /* Bit 12 : Pin 12. */
01729 #define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
01730 #define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
01731 #define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */
01732 #define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */
01733 #define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */
01734 
01735 /* Bit 11 : Pin 11. */
01736 #define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
01737 #define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
01738 #define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */
01739 #define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */
01740 #define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */
01741 
01742 /* Bit 10 : Pin 10. */
01743 #define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
01744 #define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
01745 #define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */
01746 #define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */
01747 #define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */
01748 
01749 /* Bit 9 : Pin 9. */
01750 #define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
01751 #define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
01752 #define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */
01753 #define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */
01754 #define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */
01755 
01756 /* Bit 8 : Pin 8. */
01757 #define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
01758 #define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
01759 #define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */
01760 #define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */
01761 #define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */
01762 
01763 /* Bit 7 : Pin 7. */
01764 #define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
01765 #define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
01766 #define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */
01767 #define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */
01768 #define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */
01769 
01770 /* Bit 6 : Pin 6. */
01771 #define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
01772 #define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
01773 #define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */
01774 #define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */
01775 #define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */
01776 
01777 /* Bit 5 : Pin 5. */
01778 #define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
01779 #define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
01780 #define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */
01781 #define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */
01782 #define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */
01783 
01784 /* Bit 4 : Pin 4. */
01785 #define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
01786 #define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
01787 #define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */
01788 #define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */
01789 #define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */
01790 
01791 /* Bit 3 : Pin 3. */
01792 #define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
01793 #define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
01794 #define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */
01795 #define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */
01796 #define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */
01797 
01798 /* Bit 2 : Pin 2. */
01799 #define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
01800 #define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
01801 #define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */
01802 #define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */
01803 #define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */
01804 
01805 /* Bit 1 : Pin 1. */
01806 #define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
01807 #define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
01808 #define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */
01809 #define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */
01810 #define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */
01811 
01812 /* Bit 0 : Pin 0. */
01813 #define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
01814 #define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
01815 #define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */
01816 #define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */
01817 #define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */
01818 
01819 /* Register: GPIO_IN */
01820 /* Description: Read GPIO port. */
01821 
01822 /* Bit 31 : Pin 31. */
01823 #define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
01824 #define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */
01825 #define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */
01826 #define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */
01827 
01828 /* Bit 30 : Pin 30. */
01829 #define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
01830 #define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */
01831 #define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */
01832 #define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */
01833 
01834 /* Bit 29 : Pin 29. */
01835 #define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
01836 #define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */
01837 #define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */
01838 #define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */
01839 
01840 /* Bit 28 : Pin 28. */
01841 #define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
01842 #define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */
01843 #define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */
01844 #define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */
01845 
01846 /* Bit 27 : Pin 27. */
01847 #define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
01848 #define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */
01849 #define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */
01850 #define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */
01851 
01852 /* Bit 26 : Pin 26. */
01853 #define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
01854 #define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */
01855 #define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */
01856 #define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */
01857 
01858 /* Bit 25 : Pin 25. */
01859 #define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
01860 #define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */
01861 #define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */
01862 #define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */
01863 
01864 /* Bit 24 : Pin 24. */
01865 #define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
01866 #define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */
01867 #define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */
01868 #define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */
01869 
01870 /* Bit 23 : Pin 23. */
01871 #define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
01872 #define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */
01873 #define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */
01874 #define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */
01875 
01876 /* Bit 22 : Pin 22. */
01877 #define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
01878 #define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */
01879 #define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */
01880 #define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */
01881 
01882 /* Bit 21 : Pin 21. */
01883 #define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
01884 #define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */
01885 #define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */
01886 #define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */
01887 
01888 /* Bit 20 : Pin 20. */
01889 #define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
01890 #define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */
01891 #define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */
01892 #define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */
01893 
01894 /* Bit 19 : Pin 19. */
01895 #define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
01896 #define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */
01897 #define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */
01898 #define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */
01899 
01900 /* Bit 18 : Pin 18. */
01901 #define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
01902 #define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */
01903 #define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */
01904 #define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */
01905 
01906 /* Bit 17 : Pin 17. */
01907 #define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
01908 #define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */
01909 #define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */
01910 #define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */
01911 
01912 /* Bit 16 : Pin 16. */
01913 #define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
01914 #define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */
01915 #define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */
01916 #define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */
01917 
01918 /* Bit 15 : Pin 15. */
01919 #define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
01920 #define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */
01921 #define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */
01922 #define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */
01923 
01924 /* Bit 14 : Pin 14. */
01925 #define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
01926 #define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */
01927 #define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */
01928 #define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */
01929 
01930 /* Bit 13 : Pin 13. */
01931 #define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
01932 #define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */
01933 #define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */
01934 #define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */
01935 
01936 /* Bit 12 : Pin 12. */
01937 #define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
01938 #define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */
01939 #define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */
01940 #define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */
01941 
01942 /* Bit 11 : Pin 11. */
01943 #define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
01944 #define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */
01945 #define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */
01946 #define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */
01947 
01948 /* Bit 10 : Pin 10. */
01949 #define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
01950 #define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */
01951 #define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */
01952 #define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */
01953 
01954 /* Bit 9 : Pin 9. */
01955 #define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
01956 #define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */
01957 #define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */
01958 #define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */
01959 
01960 /* Bit 8 : Pin 8. */
01961 #define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
01962 #define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */
01963 #define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */
01964 #define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */
01965 
01966 /* Bit 7 : Pin 7. */
01967 #define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
01968 #define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */
01969 #define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */
01970 #define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */
01971 
01972 /* Bit 6 : Pin 6. */
01973 #define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
01974 #define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */
01975 #define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */
01976 #define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */
01977 
01978 /* Bit 5 : Pin 5. */
01979 #define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
01980 #define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */
01981 #define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */
01982 #define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */
01983 
01984 /* Bit 4 : Pin 4. */
01985 #define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
01986 #define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */
01987 #define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */
01988 #define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */
01989 
01990 /* Bit 3 : Pin 3. */
01991 #define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
01992 #define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */
01993 #define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */
01994 #define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */
01995 
01996 /* Bit 2 : Pin 2. */
01997 #define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
01998 #define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */
01999 #define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */
02000 #define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */
02001 
02002 /* Bit 1 : Pin 1. */
02003 #define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
02004 #define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */
02005 #define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */
02006 #define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */
02007 
02008 /* Bit 0 : Pin 0. */
02009 #define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
02010 #define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */
02011 #define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */
02012 #define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */
02013 
02014 /* Register: GPIO_DIR */
02015 /* Description: Direction of GPIO pins. */
02016 
02017 /* Bit 31 : Pin 31. */
02018 #define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
02019 #define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
02020 #define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */
02021 #define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */
02022 
02023 /* Bit 30 : Pin 30. */
02024 #define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
02025 #define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
02026 #define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */
02027 #define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */
02028 
02029 /* Bit 29 : Pin 29. */
02030 #define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
02031 #define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
02032 #define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */
02033 #define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */
02034 
02035 /* Bit 28 : Pin 28. */
02036 #define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
02037 #define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
02038 #define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */
02039 #define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */
02040 
02041 /* Bit 27 : Pin 27. */
02042 #define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
02043 #define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
02044 #define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */
02045 #define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */
02046 
02047 /* Bit 26 : Pin 26. */
02048 #define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
02049 #define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
02050 #define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */
02051 #define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */
02052 
02053 /* Bit 25 : Pin 25. */
02054 #define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
02055 #define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
02056 #define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */
02057 #define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */
02058 
02059 /* Bit 24 : Pin 24. */
02060 #define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
02061 #define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
02062 #define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */
02063 #define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */
02064 
02065 /* Bit 23 : Pin 23. */
02066 #define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
02067 #define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
02068 #define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */
02069 #define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */
02070 
02071 /* Bit 22 : Pin 22. */
02072 #define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
02073 #define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
02074 #define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */
02075 #define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */
02076 
02077 /* Bit 21 : Pin 21. */
02078 #define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
02079 #define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
02080 #define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */
02081 #define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */
02082 
02083 /* Bit 20 : Pin 20. */
02084 #define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
02085 #define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
02086 #define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */
02087 #define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */
02088 
02089 /* Bit 19 : Pin 19. */
02090 #define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
02091 #define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
02092 #define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */
02093 #define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */
02094 
02095 /* Bit 18 : Pin 18. */
02096 #define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
02097 #define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
02098 #define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */
02099 #define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */
02100 
02101 /* Bit 17 : Pin 17. */
02102 #define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
02103 #define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
02104 #define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */
02105 #define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */
02106 
02107 /* Bit 16 : Pin 16. */
02108 #define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
02109 #define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
02110 #define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */
02111 #define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */
02112 
02113 /* Bit 15 : Pin 15. */
02114 #define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
02115 #define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
02116 #define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */
02117 #define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */
02118 
02119 /* Bit 14 : Pin 14. */
02120 #define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
02121 #define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
02122 #define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */
02123 #define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */
02124 
02125 /* Bit 13 : Pin 13. */
02126 #define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
02127 #define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
02128 #define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */
02129 #define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */
02130 
02131 /* Bit 12 : Pin 12. */
02132 #define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
02133 #define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
02134 #define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */
02135 #define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */
02136 
02137 /* Bit 11 : Pin 11. */
02138 #define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
02139 #define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
02140 #define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */
02141 #define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */
02142 
02143 /* Bit 10 : Pin 10. */
02144 #define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
02145 #define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
02146 #define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */
02147 #define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */
02148 
02149 /* Bit 9 : Pin 9. */
02150 #define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
02151 #define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
02152 #define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */
02153 #define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */
02154 
02155 /* Bit 8 : Pin 8. */
02156 #define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
02157 #define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
02158 #define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */
02159 #define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */
02160 
02161 /* Bit 7 : Pin 7. */
02162 #define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
02163 #define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
02164 #define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */
02165 #define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */
02166 
02167 /* Bit 6 : Pin 6. */
02168 #define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
02169 #define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
02170 #define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */
02171 #define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */
02172 
02173 /* Bit 5 : Pin 5. */
02174 #define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
02175 #define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
02176 #define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */
02177 #define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */
02178 
02179 /* Bit 4 : Pin 4. */
02180 #define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
02181 #define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
02182 #define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */
02183 #define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */
02184 
02185 /* Bit 3 : Pin 3. */
02186 #define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
02187 #define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
02188 #define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */
02189 #define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */
02190 
02191 /* Bit 2 : Pin 2. */
02192 #define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
02193 #define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
02194 #define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */
02195 #define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */
02196 
02197 /* Bit 1 : Pin 1. */
02198 #define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
02199 #define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
02200 #define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */
02201 #define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */
02202 
02203 /* Bit 0 : Pin 0. */
02204 #define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
02205 #define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
02206 #define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */
02207 #define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */
02208 
02209 /* Register: GPIO_DIRSET */
02210 /* Description: DIR set register. */
02211 
02212 /* Bit 31 : Set as output pin 31. */
02213 #define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
02214 #define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */
02215 #define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */
02216 #define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */
02217 #define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */
02218 
02219 /* Bit 30 : Set as output pin 30. */
02220 #define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
02221 #define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */
02222 #define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */
02223 #define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */
02224 #define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */
02225 
02226 /* Bit 29 : Set as output pin 29. */
02227 #define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
02228 #define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */
02229 #define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */
02230 #define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */
02231 #define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */
02232 
02233 /* Bit 28 : Set as output pin 28. */
02234 #define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
02235 #define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */
02236 #define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */
02237 #define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */
02238 #define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */
02239 
02240 /* Bit 27 : Set as output pin 27. */
02241 #define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
02242 #define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */
02243 #define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */
02244 #define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */
02245 #define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */
02246 
02247 /* Bit 26 : Set as output pin 26. */
02248 #define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
02249 #define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */
02250 #define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */
02251 #define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */
02252 #define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */
02253 
02254 /* Bit 25 : Set as output pin 25. */
02255 #define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
02256 #define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */
02257 #define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */
02258 #define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */
02259 #define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */
02260 
02261 /* Bit 24 : Set as output pin 24. */
02262 #define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
02263 #define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */
02264 #define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */
02265 #define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */
02266 #define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */
02267 
02268 /* Bit 23 : Set as output pin 23. */
02269 #define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
02270 #define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */
02271 #define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */
02272 #define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */
02273 #define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */
02274 
02275 /* Bit 22 : Set as output pin 22. */
02276 #define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
02277 #define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */
02278 #define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */
02279 #define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */
02280 #define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */
02281 
02282 /* Bit 21 : Set as output pin 21. */
02283 #define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
02284 #define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */
02285 #define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */
02286 #define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */
02287 #define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */
02288 
02289 /* Bit 20 : Set as output pin 20. */
02290 #define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
02291 #define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */
02292 #define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */
02293 #define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */
02294 #define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */
02295 
02296 /* Bit 19 : Set as output pin 19. */
02297 #define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
02298 #define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */
02299 #define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */
02300 #define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */
02301 #define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */
02302 
02303 /* Bit 18 : Set as output pin 18. */
02304 #define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
02305 #define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */
02306 #define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */
02307 #define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */
02308 #define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */
02309 
02310 /* Bit 17 : Set as output pin 17. */
02311 #define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
02312 #define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */
02313 #define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */
02314 #define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */
02315 #define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */
02316 
02317 /* Bit 16 : Set as output pin 16. */
02318 #define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
02319 #define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */
02320 #define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */
02321 #define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */
02322 #define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */
02323 
02324 /* Bit 15 : Set as output pin 15. */
02325 #define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
02326 #define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */
02327 #define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */
02328 #define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */
02329 #define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */
02330 
02331 /* Bit 14 : Set as output pin 14. */
02332 #define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
02333 #define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */
02334 #define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */
02335 #define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */
02336 #define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */
02337 
02338 /* Bit 13 : Set as output pin 13. */
02339 #define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
02340 #define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */
02341 #define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */
02342 #define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */
02343 #define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */
02344 
02345 /* Bit 12 : Set as output pin 12. */
02346 #define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
02347 #define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */
02348 #define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */
02349 #define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */
02350 #define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */
02351 
02352 /* Bit 11 : Set as output pin 11. */
02353 #define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
02354 #define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */
02355 #define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */
02356 #define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */
02357 #define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */
02358 
02359 /* Bit 10 : Set as output pin 10. */
02360 #define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
02361 #define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */
02362 #define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */
02363 #define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */
02364 #define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */
02365 
02366 /* Bit 9 : Set as output pin 9. */
02367 #define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
02368 #define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */
02369 #define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */
02370 #define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */
02371 #define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */
02372 
02373 /* Bit 8 : Set as output pin 8. */
02374 #define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
02375 #define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */
02376 #define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */
02377 #define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */
02378 #define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */
02379 
02380 /* Bit 7 : Set as output pin 7. */
02381 #define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
02382 #define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */
02383 #define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */
02384 #define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */
02385 #define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */
02386 
02387 /* Bit 6 : Set as output pin 6. */
02388 #define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
02389 #define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */
02390 #define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */
02391 #define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */
02392 #define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */
02393 
02394 /* Bit 5 : Set as output pin 5. */
02395 #define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
02396 #define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */
02397 #define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */
02398 #define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */
02399 #define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */
02400 
02401 /* Bit 4 : Set as output pin 4. */
02402 #define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
02403 #define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */
02404 #define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */
02405 #define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */
02406 #define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */
02407 
02408 /* Bit 3 : Set as output pin 3. */
02409 #define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
02410 #define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */
02411 #define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */
02412 #define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */
02413 #define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */
02414 
02415 /* Bit 2 : Set as output pin 2. */
02416 #define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
02417 #define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */
02418 #define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */
02419 #define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */
02420 #define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */
02421 
02422 /* Bit 1 : Set as output pin 1. */
02423 #define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
02424 #define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */
02425 #define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */
02426 #define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */
02427 #define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */
02428 
02429 /* Bit 0 : Set as output pin 0. */
02430 #define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
02431 #define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */
02432 #define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */
02433 #define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */
02434 #define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */
02435 
02436 /* Register: GPIO_DIRCLR */
02437 /* Description: DIR clear register. */
02438 
02439 /* Bit 31 : Set as input pin 31. */
02440 #define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
02441 #define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
02442 #define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */
02443 #define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */
02444 #define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */
02445 
02446 /* Bit 30 : Set as input pin 30. */
02447 #define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
02448 #define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
02449 #define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */
02450 #define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */
02451 #define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */
02452 
02453 /* Bit 29 : Set as input pin 29. */
02454 #define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
02455 #define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
02456 #define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */
02457 #define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */
02458 #define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */
02459 
02460 /* Bit 28 : Set as input pin 28. */
02461 #define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
02462 #define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
02463 #define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */
02464 #define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */
02465 #define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */
02466 
02467 /* Bit 27 : Set as input pin 27. */
02468 #define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
02469 #define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
02470 #define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */
02471 #define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */
02472 #define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */
02473 
02474 /* Bit 26 : Set as input pin 26. */
02475 #define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
02476 #define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
02477 #define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */
02478 #define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */
02479 #define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */
02480 
02481 /* Bit 25 : Set as input pin 25. */
02482 #define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
02483 #define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
02484 #define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */
02485 #define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */
02486 #define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */
02487 
02488 /* Bit 24 : Set as input pin 24. */
02489 #define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
02490 #define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
02491 #define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */
02492 #define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */
02493 #define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */
02494 
02495 /* Bit 23 : Set as input pin 23. */
02496 #define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
02497 #define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
02498 #define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */
02499 #define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */
02500 #define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */
02501 
02502 /* Bit 22 : Set as input pin 22. */
02503 #define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
02504 #define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
02505 #define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */
02506 #define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */
02507 #define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */
02508 
02509 /* Bit 21 : Set as input pin 21. */
02510 #define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
02511 #define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
02512 #define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */
02513 #define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */
02514 #define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */
02515 
02516 /* Bit 20 : Set as input pin 20. */
02517 #define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
02518 #define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
02519 #define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */
02520 #define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */
02521 #define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */
02522 
02523 /* Bit 19 : Set as input pin 19. */
02524 #define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
02525 #define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
02526 #define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */
02527 #define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */
02528 #define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */
02529 
02530 /* Bit 18 : Set as input pin 18. */
02531 #define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
02532 #define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
02533 #define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */
02534 #define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */
02535 #define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */
02536 
02537 /* Bit 17 : Set as input pin 17. */
02538 #define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
02539 #define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
02540 #define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */
02541 #define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */
02542 #define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */
02543 
02544 /* Bit 16 : Set as input pin 16. */
02545 #define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
02546 #define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
02547 #define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */
02548 #define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */
02549 #define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */
02550 
02551 /* Bit 15 : Set as input pin 15. */
02552 #define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
02553 #define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
02554 #define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */
02555 #define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */
02556 #define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */
02557 
02558 /* Bit 14 : Set as input pin 14. */
02559 #define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
02560 #define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
02561 #define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */
02562 #define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */
02563 #define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */
02564 
02565 /* Bit 13 : Set as input pin 13. */
02566 #define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
02567 #define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
02568 #define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */
02569 #define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */
02570 #define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */
02571 
02572 /* Bit 12 : Set as input pin 12. */
02573 #define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
02574 #define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
02575 #define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */
02576 #define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */
02577 #define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */
02578 
02579 /* Bit 11 : Set as input pin 11. */
02580 #define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
02581 #define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
02582 #define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */
02583 #define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */
02584 #define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */
02585 
02586 /* Bit 10 : Set as input pin 10. */
02587 #define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
02588 #define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
02589 #define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */
02590 #define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */
02591 #define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */
02592 
02593 /* Bit 9 : Set as input pin 9. */
02594 #define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
02595 #define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
02596 #define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */
02597 #define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */
02598 #define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */
02599 
02600 /* Bit 8 : Set as input pin 8. */
02601 #define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
02602 #define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
02603 #define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */
02604 #define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */
02605 #define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */
02606 
02607 /* Bit 7 : Set as input pin 7. */
02608 #define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
02609 #define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
02610 #define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */
02611 #define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */
02612 #define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */
02613 
02614 /* Bit 6 : Set as input pin 6. */
02615 #define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
02616 #define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
02617 #define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */
02618 #define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */
02619 #define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */
02620 
02621 /* Bit 5 : Set as input pin 5. */
02622 #define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
02623 #define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
02624 #define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */
02625 #define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */
02626 #define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */
02627 
02628 /* Bit 4 : Set as input pin 4. */
02629 #define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
02630 #define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
02631 #define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */
02632 #define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */
02633 #define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */
02634 
02635 /* Bit 3 : Set as input pin 3. */
02636 #define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
02637 #define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
02638 #define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */
02639 #define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */
02640 #define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */
02641 
02642 /* Bit 2 : Set as input pin 2. */
02643 #define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
02644 #define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
02645 #define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */
02646 #define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */
02647 #define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */
02648 
02649 /* Bit 1 : Set as input pin 1. */
02650 #define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
02651 #define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
02652 #define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */
02653 #define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */
02654 #define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */
02655 
02656 /* Bit 0 : Set as input pin 0. */
02657 #define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
02658 #define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
02659 #define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */
02660 #define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */
02661 #define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */
02662 
02663 /* Register: GPIO_PIN_CNF */
02664 /* Description: Configuration of GPIO pins. */
02665 
02666 /* Bits 17..16 : Pin sensing mechanism. */
02667 #define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */
02668 #define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */
02669 #define GPIO_PIN_CNF_SENSE_Disabled (0x00UL) /*!< Disabled. */
02670 #define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */
02671 #define GPIO_PIN_CNF_SENSE_Low (0x03UL) /*!< Wakeup on low level. */
02672 
02673 /* Bits 10..8 : Drive configuration. */
02674 #define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */
02675 #define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */
02676 #define GPIO_PIN_CNF_DRIVE_S0S1 (0x00UL) /*!< Standard '0', Standard '1'. */
02677 #define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */
02678 #define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */
02679 #define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */
02680 #define GPIO_PIN_CNF_DRIVE_D0S1 (0x04UL) /*!< Disconnected '0', Standard '1'. */
02681 #define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */
02682 #define GPIO_PIN_CNF_DRIVE_S0D1 (0x06UL) /*!< Standard '0', Disconnected '1'. */
02683 #define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */
02684 
02685 /* Bits 3..2 : Pull-up or -down configuration. */
02686 #define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */
02687 #define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */
02688 #define GPIO_PIN_CNF_PULL_Disabled (0x00UL) /*!< No pull. */
02689 #define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */
02690 #define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */
02691 
02692 /* Bit 1 : Connect or disconnect input path. */
02693 #define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */
02694 #define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */
02695 #define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */
02696 #define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */
02697 
02698 /* Bit 0 : Pin direction. */
02699 #define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */
02700 #define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */
02701 #define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */
02702 #define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */
02703 
02704 
02705 /* Peripheral: GPIOTE */
02706 /* Description: GPIO tasks and events. */
02707 
02708 /* Register: GPIOTE_INTENSET */
02709 /* Description: Interrupt enable set register. */
02710 
02711 /* Bit 31 : Enable interrupt on PORT event. */
02712 #define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */
02713 #define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */
02714 #define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Interrupt disabled. */
02715 #define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Interrupt enabled. */
02716 #define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable interrupt on write. */
02717 
02718 /* Bit 3 : Enable interrupt on IN[3] event. */
02719 #define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */
02720 #define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */
02721 #define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Interrupt disabled. */
02722 #define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Interrupt enabled. */
02723 #define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable interrupt on write. */
02724 
02725 /* Bit 2 : Enable interrupt on IN[2] event. */
02726 #define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */
02727 #define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */
02728 #define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Interrupt disabled. */
02729 #define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Interrupt enabled. */
02730 #define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable interrupt on write. */
02731 
02732 /* Bit 1 : Enable interrupt on IN[1] event. */
02733 #define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */
02734 #define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */
02735 #define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Interrupt disabled. */
02736 #define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Interrupt enabled. */
02737 #define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable interrupt on write. */
02738 
02739 /* Bit 0 : Enable interrupt on IN[0] event. */
02740 #define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */
02741 #define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */
02742 #define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Interrupt disabled. */
02743 #define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Interrupt enabled. */
02744 #define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable interrupt on write. */
02745 
02746 /* Register: GPIOTE_INTENCLR */
02747 /* Description: Interrupt enable clear register. */
02748 
02749 /* Bit 31 : Disable interrupt on PORT event. */
02750 #define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */
02751 #define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */
02752 #define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Interrupt disabled. */
02753 #define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Interrupt enabled. */
02754 #define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable interrupt on write. */
02755 
02756 /* Bit 3 : Disable interrupt on IN[3] event. */
02757 #define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */
02758 #define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */
02759 #define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Interrupt disabled. */
02760 #define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Interrupt enabled. */
02761 #define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable interrupt on write. */
02762 
02763 /* Bit 2 : Disable interrupt on IN[2] event. */
02764 #define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */
02765 #define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */
02766 #define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Interrupt disabled. */
02767 #define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Interrupt enabled. */
02768 #define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable interrupt on write. */
02769 
02770 /* Bit 1 : Disable interrupt on IN[1] event. */
02771 #define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */
02772 #define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */
02773 #define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Interrupt disabled. */
02774 #define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Interrupt enabled. */
02775 #define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable interrupt on write. */
02776 
02777 /* Bit 0 : Disable interrupt on IN[0] event. */
02778 #define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */
02779 #define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */
02780 #define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Interrupt disabled. */
02781 #define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Interrupt enabled. */
02782 #define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable interrupt on write. */
02783 
02784 /* Register: GPIOTE_CONFIG */
02785 /* Description: Channel configuration registers. */
02786 
02787 /* Bit 20 : Initial value of the output when the GPIOTE channel is configured as a Task. */
02788 #define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */
02789 #define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */
02790 #define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Initial low output when in task mode. */
02791 #define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */
02792 
02793 /* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */
02794 #define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */
02795 #define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */
02796 #define GPIOTE_CONFIG_POLARITY_None (0x00UL) /*!< No task or event. */
02797 #define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */
02798 #define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */
02799 #define GPIOTE_CONFIG_POLARITY_Toggle (0x03UL) /*!< Toggle. */
02800 
02801 /* Bits 12..8 : Pin select. */
02802 #define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */
02803 #define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */
02804 
02805 /* Bits 1..0 : Mode */
02806 #define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */
02807 #define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */
02808 #define GPIOTE_CONFIG_MODE_Disabled (0x00UL) /*!< Disabled. */
02809 #define GPIOTE_CONFIG_MODE_Event (0x01UL) /*!< Channel configure in event mode. */
02810 #define GPIOTE_CONFIG_MODE_Task (0x03UL) /*!< Channel configure in task mode. */
02811 
02812 /* Register: GPIOTE_POWER */
02813 /* Description: Peripheral power control. */
02814 
02815 /* Bit 0 : Peripheral power control. */
02816 #define GPIOTE_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
02817 #define GPIOTE_POWER_POWER_Msk (0x1UL << GPIOTE_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
02818 #define GPIOTE_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
02819 #define GPIOTE_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
02820 
02821 
02822 /* Peripheral: LPCOMP */
02823 /* Description: Low power comparator. */
02824 
02825 /* Register: LPCOMP_SHORTS */
02826 /* Description: Shortcuts for the LPCOMP. */
02827 
02828 /* Bit 4 : Shortcut between CROSS event and STOP task. */
02829 #define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */
02830 #define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */
02831 #define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */
02832 #define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */
02833 
02834 /* Bit 3 : Shortcut between UP event and STOP task. */
02835 #define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */
02836 #define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */
02837 #define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */
02838 #define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */
02839 
02840 /* Bit 2 : Shortcut between DOWN event and STOP task. */
02841 #define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */
02842 #define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */
02843 #define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */
02844 #define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */
02845 
02846 /* Bit 1 : Shortcut between RADY event and STOP task. */
02847 #define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */
02848 #define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */
02849 #define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */
02850 #define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */
02851 
02852 /* Bit 0 : Shortcut between READY event and SAMPLE task. */
02853 #define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */
02854 #define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */
02855 #define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */
02856 #define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */
02857 
02858 /* Register: LPCOMP_INTENSET */
02859 /* Description: Interrupt enable set register. */
02860 
02861 /* Bit 3 : Enable interrupt on CROSS event. */
02862 #define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */
02863 #define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */
02864 #define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */
02865 #define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */
02866 #define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */
02867 
02868 /* Bit 2 : Enable interrupt on UP event. */
02869 #define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */
02870 #define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */
02871 #define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */
02872 #define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */
02873 #define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */
02874 
02875 /* Bit 1 : Enable interrupt on DOWN event. */
02876 #define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */
02877 #define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */
02878 #define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */
02879 #define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */
02880 #define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */
02881 
02882 /* Bit 0 : Enable interrupt on READY event. */
02883 #define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */
02884 #define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
02885 #define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */
02886 #define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */
02887 #define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */
02888 
02889 /* Register: LPCOMP_INTENCLR */
02890 /* Description: Interrupt enable clear register. */
02891 
02892 /* Bit 3 : Disable interrupt on CROSS event. */
02893 #define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */
02894 #define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */
02895 #define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */
02896 #define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */
02897 #define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */
02898 
02899 /* Bit 2 : Disable interrupt on UP event. */
02900 #define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */
02901 #define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */
02902 #define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */
02903 #define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */
02904 #define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */
02905 
02906 /* Bit 1 : Disable interrupt on DOWN event. */
02907 #define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */
02908 #define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */
02909 #define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */
02910 #define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */
02911 #define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */
02912 
02913 /* Bit 0 : Disable interrupt on READY event. */
02914 #define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */
02915 #define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
02916 #define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */
02917 #define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */
02918 #define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */
02919 
02920 /* Register: LPCOMP_RESULT */
02921 /* Description: Result of last compare. */
02922 
02923 /* Bit 0 : Result of last compare. Decision point SAMPLE task. */
02924 #define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */
02925 #define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */
02926 #define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */
02927 #define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */
02928 
02929 /* Register: LPCOMP_ENABLE */
02930 /* Description: Enable the LPCOMP. */
02931 
02932 /* Bits 1..0 : Enable or disable LPCOMP. */
02933 #define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
02934 #define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
02935 #define LPCOMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled LPCOMP. */
02936 #define LPCOMP_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable LPCOMP. */
02937 
02938 /* Register: LPCOMP_PSEL */
02939 /* Description: Input pin select. */
02940 
02941 /* Bits 2..0 : Analog input pin select. */
02942 #define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */
02943 #define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */
02944 #define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */
02945 #define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */
02946 #define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */
02947 #define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */
02948 #define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */
02949 #define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */
02950 #define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */
02951 #define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */
02952 
02953 /* Register: LPCOMP_REFSEL */
02954 /* Description: Reference select. */
02955 
02956 /* Bits 2..0 : Reference select. */
02957 #define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */
02958 #define LPCOMP_REFSEL_REFSEL_Msk (0x7UL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */
02959 #define LPCOMP_REFSEL_REFSEL_SupplyOneEighthPrescaling (0UL) /*!< Use supply with a 1/8 prescaler as reference. */
02960 #define LPCOMP_REFSEL_REFSEL_SupplyTwoEighthsPrescaling (1UL) /*!< Use supply with a 2/8 prescaler as reference. */
02961 #define LPCOMP_REFSEL_REFSEL_SupplyThreeEighthsPrescaling (2UL) /*!< Use supply with a 3/8 prescaler as reference. */
02962 #define LPCOMP_REFSEL_REFSEL_SupplyFourEighthsPrescaling (3UL) /*!< Use supply with a 4/8 prescaler as reference. */
02963 #define LPCOMP_REFSEL_REFSEL_SupplyFiveEighthsPrescaling (4UL) /*!< Use supply with a 5/8 prescaler as reference. */
02964 #define LPCOMP_REFSEL_REFSEL_SupplySixEighthsPrescaling (5UL) /*!< Use supply with a 6/8 prescaler as reference. */
02965 #define LPCOMP_REFSEL_REFSEL_SupplySevenEighthsPrescaling (6UL) /*!< Use supply with a 7/8 prescaler as reference. */
02966 #define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< Use external analog reference as reference. */
02967 
02968 /* Register: LPCOMP_EXTREFSEL */
02969 /* Description: External reference select. */
02970 
02971 /* Bit 0 : External analog reference pin selection. */
02972 #define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */
02973 #define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */
02974 #define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */
02975 #define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */
02976 
02977 /* Register: LPCOMP_ANADETECT */
02978 /* Description: Analog detect configuration. */
02979 
02980 /* Bits 1..0 : Analog detect configuration. */
02981 #define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */
02982 #define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */
02983 #define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETEC on crossing, both upwards and downwards crossing. */
02984 #define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETEC on upwards crossing only. */
02985 #define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETEC on downwards crossing only. */
02986 
02987 /* Register: LPCOMP_POWER */
02988 /* Description: Peripheral power control. */
02989 
02990 /* Bit 0 : Peripheral power control. */
02991 #define LPCOMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
02992 #define LPCOMP_POWER_POWER_Msk (0x1UL << LPCOMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
02993 #define LPCOMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
02994 #define LPCOMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
02995 
02996 
02997 /* Peripheral: MPU */
02998 /* Description: Memory Protection Unit. */
02999 
03000 /* Register: MPU_PERR0 */
03001 /* Description: Configuration of peripherals in mpu regions. */
03002 
03003 /* Bit 31 : PPI region configuration. */
03004 #define MPU_PERR0_PPI_Pos (31UL) /*!< Position of PPI field. */
03005 #define MPU_PERR0_PPI_Msk (0x1UL << MPU_PERR0_PPI_Pos) /*!< Bit mask of PPI field. */
03006 #define MPU_PERR0_PPI_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03007 #define MPU_PERR0_PPI_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03008 
03009 /* Bit 30 : NVMC region configuration. */
03010 #define MPU_PERR0_NVMC_Pos (30UL) /*!< Position of NVMC field. */
03011 #define MPU_PERR0_NVMC_Msk (0x1UL << MPU_PERR0_NVMC_Pos) /*!< Bit mask of NVMC field. */
03012 #define MPU_PERR0_NVMC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03013 #define MPU_PERR0_NVMC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03014 
03015 /* Bit 19 : LPCOMP region configuration. */
03016 #define MPU_PERR0_LPCOMP_Pos (19UL) /*!< Position of LPCOMP field. */
03017 #define MPU_PERR0_LPCOMP_Msk (0x1UL << MPU_PERR0_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */
03018 #define MPU_PERR0_LPCOMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03019 #define MPU_PERR0_LPCOMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03020 
03021 /* Bit 18 : QDEC region configuration. */
03022 #define MPU_PERR0_QDEC_Pos (18UL) /*!< Position of QDEC field. */
03023 #define MPU_PERR0_QDEC_Msk (0x1UL << MPU_PERR0_QDEC_Pos) /*!< Bit mask of QDEC field. */
03024 #define MPU_PERR0_QDEC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03025 #define MPU_PERR0_QDEC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03026 
03027 /* Bit 17 : RTC1 region configuration. */
03028 #define MPU_PERR0_RTC1_Pos (17UL) /*!< Position of RTC1 field. */
03029 #define MPU_PERR0_RTC1_Msk (0x1UL << MPU_PERR0_RTC1_Pos) /*!< Bit mask of RTC1 field. */
03030 #define MPU_PERR0_RTC1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03031 #define MPU_PERR0_RTC1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03032 
03033 /* Bit 16 : WDT region configuration. */
03034 #define MPU_PERR0_WDT_Pos (16UL) /*!< Position of WDT field. */
03035 #define MPU_PERR0_WDT_Msk (0x1UL << MPU_PERR0_WDT_Pos) /*!< Bit mask of WDT field. */
03036 #define MPU_PERR0_WDT_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03037 #define MPU_PERR0_WDT_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03038 
03039 /* Bit 15 : CCM and AAR region configuration. */
03040 #define MPU_PERR0_CCM_AAR_Pos (15UL) /*!< Position of CCM_AAR field. */
03041 #define MPU_PERR0_CCM_AAR_Msk (0x1UL << MPU_PERR0_CCM_AAR_Pos) /*!< Bit mask of CCM_AAR field. */
03042 #define MPU_PERR0_CCM_AAR_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03043 #define MPU_PERR0_CCM_AAR_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03044 
03045 /* Bit 14 : ECB region configuration. */
03046 #define MPU_PERR0_ECB_Pos (14UL) /*!< Position of ECB field. */
03047 #define MPU_PERR0_ECB_Msk (0x1UL << MPU_PERR0_ECB_Pos) /*!< Bit mask of ECB field. */
03048 #define MPU_PERR0_ECB_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03049 #define MPU_PERR0_ECB_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03050 
03051 /* Bit 13 : RNG region configuration. */
03052 #define MPU_PERR0_RNG_Pos (13UL) /*!< Position of RNG field. */
03053 #define MPU_PERR0_RNG_Msk (0x1UL << MPU_PERR0_RNG_Pos) /*!< Bit mask of RNG field. */
03054 #define MPU_PERR0_RNG_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03055 #define MPU_PERR0_RNG_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03056 
03057 /* Bit 12 : TEMP region configuration. */
03058 #define MPU_PERR0_TEMP_Pos (12UL) /*!< Position of TEMP field. */
03059 #define MPU_PERR0_TEMP_Msk (0x1UL << MPU_PERR0_TEMP_Pos) /*!< Bit mask of TEMP field. */
03060 #define MPU_PERR0_TEMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03061 #define MPU_PERR0_TEMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03062 
03063 /* Bit 11 : RTC0 region configuration. */
03064 #define MPU_PERR0_RTC0_Pos (11UL) /*!< Position of RTC0 field. */
03065 #define MPU_PERR0_RTC0_Msk (0x1UL << MPU_PERR0_RTC0_Pos) /*!< Bit mask of RTC0 field. */
03066 #define MPU_PERR0_RTC0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03067 #define MPU_PERR0_RTC0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03068 
03069 /* Bit 10 : TIMER2 region configuration. */
03070 #define MPU_PERR0_TIMER2_Pos (10UL) /*!< Position of TIMER2 field. */
03071 #define MPU_PERR0_TIMER2_Msk (0x1UL << MPU_PERR0_TIMER2_Pos) /*!< Bit mask of TIMER2 field. */
03072 #define MPU_PERR0_TIMER2_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03073 #define MPU_PERR0_TIMER2_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03074 
03075 /* Bit 9 : TIMER1 region configuration. */
03076 #define MPU_PERR0_TIMER1_Pos (9UL) /*!< Position of TIMER1 field. */
03077 #define MPU_PERR0_TIMER1_Msk (0x1UL << MPU_PERR0_TIMER1_Pos) /*!< Bit mask of TIMER1 field. */
03078 #define MPU_PERR0_TIMER1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03079 #define MPU_PERR0_TIMER1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03080 
03081 /* Bit 8 : TIMER0 region configuration. */
03082 #define MPU_PERR0_TIMER0_Pos (8UL) /*!< Position of TIMER0 field. */
03083 #define MPU_PERR0_TIMER0_Msk (0x1UL << MPU_PERR0_TIMER0_Pos) /*!< Bit mask of TIMER0 field. */
03084 #define MPU_PERR0_TIMER0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03085 #define MPU_PERR0_TIMER0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03086 
03087 /* Bit 7 : ADC region configuration. */
03088 #define MPU_PERR0_ADC_Pos (7UL) /*!< Position of ADC field. */
03089 #define MPU_PERR0_ADC_Msk (0x1UL << MPU_PERR0_ADC_Pos) /*!< Bit mask of ADC field. */
03090 #define MPU_PERR0_ADC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03091 #define MPU_PERR0_ADC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03092 
03093 /* Bit 6 : GPIOTE region configuration. */
03094 #define MPU_PERR0_GPIOTE_Pos (6UL) /*!< Position of GPIOTE field. */
03095 #define MPU_PERR0_GPIOTE_Msk (0x1UL << MPU_PERR0_GPIOTE_Pos) /*!< Bit mask of GPIOTE field. */
03096 #define MPU_PERR0_GPIOTE_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03097 #define MPU_PERR0_GPIOTE_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03098 
03099 /* Bit 4 : SPI1 and TWI1 region configuration. */
03100 #define MPU_PERR0_SPI1_TWI1_Pos (4UL) /*!< Position of SPI1_TWI1 field. */
03101 #define MPU_PERR0_SPI1_TWI1_Msk (0x1UL << MPU_PERR0_SPI1_TWI1_Pos) /*!< Bit mask of SPI1_TWI1 field. */
03102 #define MPU_PERR0_SPI1_TWI1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03103 #define MPU_PERR0_SPI1_TWI1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03104 
03105 /* Bit 3 : SPI0 and TWI0 region configuration. */
03106 #define MPU_PERR0_SPI0_TWI0_Pos (3UL) /*!< Position of SPI0_TWI0 field. */
03107 #define MPU_PERR0_SPI0_TWI0_Msk (0x1UL << MPU_PERR0_SPI0_TWI0_Pos) /*!< Bit mask of SPI0_TWI0 field. */
03108 #define MPU_PERR0_SPI0_TWI0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03109 #define MPU_PERR0_SPI0_TWI0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03110 
03111 /* Bit 2 : UART0 region configuration. */
03112 #define MPU_PERR0_UART0_Pos (2UL) /*!< Position of UART0 field. */
03113 #define MPU_PERR0_UART0_Msk (0x1UL << MPU_PERR0_UART0_Pos) /*!< Bit mask of UART0 field. */
03114 #define MPU_PERR0_UART0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03115 #define MPU_PERR0_UART0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03116 
03117 /* Bit 1 : RADIO region configuration. */
03118 #define MPU_PERR0_RADIO_Pos (1UL) /*!< Position of RADIO field. */
03119 #define MPU_PERR0_RADIO_Msk (0x1UL << MPU_PERR0_RADIO_Pos) /*!< Bit mask of RADIO field. */
03120 #define MPU_PERR0_RADIO_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03121 #define MPU_PERR0_RADIO_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03122 
03123 /* Bit 0 : POWER_CLOCK region configuration. */
03124 #define MPU_PERR0_POWER_CLOCK_Pos (0UL) /*!< Position of POWER_CLOCK field. */
03125 #define MPU_PERR0_POWER_CLOCK_Msk (0x1UL << MPU_PERR0_POWER_CLOCK_Pos) /*!< Bit mask of POWER_CLOCK field. */
03126 #define MPU_PERR0_POWER_CLOCK_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
03127 #define MPU_PERR0_POWER_CLOCK_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
03128 
03129 /* Register: MPU_PROTENSET0 */
03130 /* Description: Erase and write protection bit enable set register. */
03131 
03132 /* Bit 31 : Protection enable for region 31. */
03133 #define MPU_PROTENSET0_PROTREG31_Pos (31UL) /*!< Position of PROTREG31 field. */
03134 #define MPU_PROTENSET0_PROTREG31_Msk (0x1UL << MPU_PROTENSET0_PROTREG31_Pos) /*!< Bit mask of PROTREG31 field. */
03135 #define MPU_PROTENSET0_PROTREG31_Disabled (0UL) /*!< Protection disabled. */
03136 #define MPU_PROTENSET0_PROTREG31_Enabled (1UL) /*!< Protection enabled. */
03137 #define MPU_PROTENSET0_PROTREG31_Set (1UL) /*!< Enable protection on write. */
03138 
03139 /* Bit 30 : Protection enable for region 30. */
03140 #define MPU_PROTENSET0_PROTREG30_Pos (30UL) /*!< Position of PROTREG30 field. */
03141 #define MPU_PROTENSET0_PROTREG30_Msk (0x1UL << MPU_PROTENSET0_PROTREG30_Pos) /*!< Bit mask of PROTREG30 field. */
03142 #define MPU_PROTENSET0_PROTREG30_Disabled (0UL) /*!< Protection disabled. */
03143 #define MPU_PROTENSET0_PROTREG30_Enabled (1UL) /*!< Protection enabled. */
03144 #define MPU_PROTENSET0_PROTREG30_Set (1UL) /*!< Enable protection on write. */
03145 
03146 /* Bit 29 : Protection enable for region 29. */
03147 #define MPU_PROTENSET0_PROTREG29_Pos (29UL) /*!< Position of PROTREG29 field. */
03148 #define MPU_PROTENSET0_PROTREG29_Msk (0x1UL << MPU_PROTENSET0_PROTREG29_Pos) /*!< Bit mask of PROTREG29 field. */
03149 #define MPU_PROTENSET0_PROTREG29_Disabled (0UL) /*!< Protection disabled. */
03150 #define MPU_PROTENSET0_PROTREG29_Enabled (1UL) /*!< Protection enabled. */
03151 #define MPU_PROTENSET0_PROTREG29_Set (1UL) /*!< Enable protection on write. */
03152 
03153 /* Bit 28 : Protection enable for region 28. */
03154 #define MPU_PROTENSET0_PROTREG28_Pos (28UL) /*!< Position of PROTREG28 field. */
03155 #define MPU_PROTENSET0_PROTREG28_Msk (0x1UL << MPU_PROTENSET0_PROTREG28_Pos) /*!< Bit mask of PROTREG28 field. */
03156 #define MPU_PROTENSET0_PROTREG28_Disabled (0UL) /*!< Protection disabled. */
03157 #define MPU_PROTENSET0_PROTREG28_Enabled (1UL) /*!< Protection enabled. */
03158 #define MPU_PROTENSET0_PROTREG28_Set (1UL) /*!< Enable protection on write. */
03159 
03160 /* Bit 27 : Protection enable for region 27. */
03161 #define MPU_PROTENSET0_PROTREG27_Pos (27UL) /*!< Position of PROTREG27 field. */
03162 #define MPU_PROTENSET0_PROTREG27_Msk (0x1UL << MPU_PROTENSET0_PROTREG27_Pos) /*!< Bit mask of PROTREG27 field. */
03163 #define MPU_PROTENSET0_PROTREG27_Disabled (0UL) /*!< Protection disabled. */
03164 #define MPU_PROTENSET0_PROTREG27_Enabled (1UL) /*!< Protection enabled. */
03165 #define MPU_PROTENSET0_PROTREG27_Set (1UL) /*!< Enable protection on write. */
03166 
03167 /* Bit 26 : Protection enable for region 26. */
03168 #define MPU_PROTENSET0_PROTREG26_Pos (26UL) /*!< Position of PROTREG26 field. */
03169 #define MPU_PROTENSET0_PROTREG26_Msk (0x1UL << MPU_PROTENSET0_PROTREG26_Pos) /*!< Bit mask of PROTREG26 field. */
03170 #define MPU_PROTENSET0_PROTREG26_Disabled (0UL) /*!< Protection disabled. */
03171 #define MPU_PROTENSET0_PROTREG26_Enabled (1UL) /*!< Protection enabled. */
03172 #define MPU_PROTENSET0_PROTREG26_Set (1UL) /*!< Enable protection on write. */
03173 
03174 /* Bit 25 : Protection enable for region 25. */
03175 #define MPU_PROTENSET0_PROTREG25_Pos (25UL) /*!< Position of PROTREG25 field. */
03176 #define MPU_PROTENSET0_PROTREG25_Msk (0x1UL << MPU_PROTENSET0_PROTREG25_Pos) /*!< Bit mask of PROTREG25 field. */
03177 #define MPU_PROTENSET0_PROTREG25_Disabled (0UL) /*!< Protection disabled. */
03178 #define MPU_PROTENSET0_PROTREG25_Enabled (1UL) /*!< Protection enabled. */
03179 #define MPU_PROTENSET0_PROTREG25_Set (1UL) /*!< Enable protection on write. */
03180 
03181 /* Bit 24 : Protection enable for region 24. */
03182 #define MPU_PROTENSET0_PROTREG24_Pos (24UL) /*!< Position of PROTREG24 field. */
03183 #define MPU_PROTENSET0_PROTREG24_Msk (0x1UL << MPU_PROTENSET0_PROTREG24_Pos) /*!< Bit mask of PROTREG24 field. */
03184 #define MPU_PROTENSET0_PROTREG24_Disabled (0UL) /*!< Protection disabled. */
03185 #define MPU_PROTENSET0_PROTREG24_Enabled (1UL) /*!< Protection enabled. */
03186 #define MPU_PROTENSET0_PROTREG24_Set (1UL) /*!< Enable protection on write. */
03187 
03188 /* Bit 23 : Protection enable for region 23. */
03189 #define MPU_PROTENSET0_PROTREG23_Pos (23UL) /*!< Position of PROTREG23 field. */
03190 #define MPU_PROTENSET0_PROTREG23_Msk (0x1UL << MPU_PROTENSET0_PROTREG23_Pos) /*!< Bit mask of PROTREG23 field. */
03191 #define MPU_PROTENSET0_PROTREG23_Disabled (0UL) /*!< Protection disabled. */
03192 #define MPU_PROTENSET0_PROTREG23_Enabled (1UL) /*!< Protection enabled. */
03193 #define MPU_PROTENSET0_PROTREG23_Set (1UL) /*!< Enable protection on write. */
03194 
03195 /* Bit 22 : Protection enable for region 22. */
03196 #define MPU_PROTENSET0_PROTREG22_Pos (22UL) /*!< Position of PROTREG22 field. */
03197 #define MPU_PROTENSET0_PROTREG22_Msk (0x1UL << MPU_PROTENSET0_PROTREG22_Pos) /*!< Bit mask of PROTREG22 field. */
03198 #define MPU_PROTENSET0_PROTREG22_Disabled (0UL) /*!< Protection disabled. */
03199 #define MPU_PROTENSET0_PROTREG22_Enabled (1UL) /*!< Protection enabled. */
03200 #define MPU_PROTENSET0_PROTREG22_Set (1UL) /*!< Enable protection on write. */
03201 
03202 /* Bit 21 : Protection enable for region 21. */
03203 #define MPU_PROTENSET0_PROTREG21_Pos (21UL) /*!< Position of PROTREG21 field. */
03204 #define MPU_PROTENSET0_PROTREG21_Msk (0x1UL << MPU_PROTENSET0_PROTREG21_Pos) /*!< Bit mask of PROTREG21 field. */
03205 #define MPU_PROTENSET0_PROTREG21_Disabled (0UL) /*!< Protection disabled. */
03206 #define MPU_PROTENSET0_PROTREG21_Enabled (1UL) /*!< Protection enabled. */
03207 #define MPU_PROTENSET0_PROTREG21_Set (1UL) /*!< Enable protection on write. */
03208 
03209 /* Bit 20 : Protection enable for region 20. */
03210 #define MPU_PROTENSET0_PROTREG20_Pos (20UL) /*!< Position of PROTREG20 field. */
03211 #define MPU_PROTENSET0_PROTREG20_Msk (0x1UL << MPU_PROTENSET0_PROTREG20_Pos) /*!< Bit mask of PROTREG20 field. */
03212 #define MPU_PROTENSET0_PROTREG20_Disabled (0UL) /*!< Protection disabled. */
03213 #define MPU_PROTENSET0_PROTREG20_Enabled (1UL) /*!< Protection enabled. */
03214 #define MPU_PROTENSET0_PROTREG20_Set (1UL) /*!< Enable protection on write. */
03215 
03216 /* Bit 19 : Protection enable for region 19. */
03217 #define MPU_PROTENSET0_PROTREG19_Pos (19UL) /*!< Position of PROTREG19 field. */
03218 #define MPU_PROTENSET0_PROTREG19_Msk (0x1UL << MPU_PROTENSET0_PROTREG19_Pos) /*!< Bit mask of PROTREG19 field. */
03219 #define MPU_PROTENSET0_PROTREG19_Disabled (0UL) /*!< Protection disabled. */
03220 #define MPU_PROTENSET0_PROTREG19_Enabled (1UL) /*!< Protection enabled. */
03221 #define MPU_PROTENSET0_PROTREG19_Set (1UL) /*!< Enable protection on write. */
03222 
03223 /* Bit 18 : Protection enable for region 18. */
03224 #define MPU_PROTENSET0_PROTREG18_Pos (18UL) /*!< Position of PROTREG18 field. */
03225 #define MPU_PROTENSET0_PROTREG18_Msk (0x1UL << MPU_PROTENSET0_PROTREG18_Pos) /*!< Bit mask of PROTREG18 field. */
03226 #define MPU_PROTENSET0_PROTREG18_Disabled (0UL) /*!< Protection disabled. */
03227 #define MPU_PROTENSET0_PROTREG18_Enabled (1UL) /*!< Protection enabled. */
03228 #define MPU_PROTENSET0_PROTREG18_Set (1UL) /*!< Enable protection on write. */
03229 
03230 /* Bit 17 : Protection enable for region 17. */
03231 #define MPU_PROTENSET0_PROTREG17_Pos (17UL) /*!< Position of PROTREG17 field. */
03232 #define MPU_PROTENSET0_PROTREG17_Msk (0x1UL << MPU_PROTENSET0_PROTREG17_Pos) /*!< Bit mask of PROTREG17 field. */
03233 #define MPU_PROTENSET0_PROTREG17_Disabled (0UL) /*!< Protection disabled. */
03234 #define MPU_PROTENSET0_PROTREG17_Enabled (1UL) /*!< Protection enabled. */
03235 #define MPU_PROTENSET0_PROTREG17_Set (1UL) /*!< Enable protection on write. */
03236 
03237 /* Bit 16 : Protection enable for region 16. */
03238 #define MPU_PROTENSET0_PROTREG16_Pos (16UL) /*!< Position of PROTREG16 field. */
03239 #define MPU_PROTENSET0_PROTREG16_Msk (0x1UL << MPU_PROTENSET0_PROTREG16_Pos) /*!< Bit mask of PROTREG16 field. */
03240 #define MPU_PROTENSET0_PROTREG16_Disabled (0UL) /*!< Protection disabled. */
03241 #define MPU_PROTENSET0_PROTREG16_Enabled (1UL) /*!< Protection enabled. */
03242 #define MPU_PROTENSET0_PROTREG16_Set (1UL) /*!< Enable protection on write. */
03243 
03244 /* Bit 15 : Protection enable for region 15. */
03245 #define MPU_PROTENSET0_PROTREG15_Pos (15UL) /*!< Position of PROTREG15 field. */
03246 #define MPU_PROTENSET0_PROTREG15_Msk (0x1UL << MPU_PROTENSET0_PROTREG15_Pos) /*!< Bit mask of PROTREG15 field. */
03247 #define MPU_PROTENSET0_PROTREG15_Disabled (0UL) /*!< Protection disabled. */
03248 #define MPU_PROTENSET0_PROTREG15_Enabled (1UL) /*!< Protection enabled. */
03249 #define MPU_PROTENSET0_PROTREG15_Set (1UL) /*!< Enable protection on write. */
03250 
03251 /* Bit 14 : Protection enable for region 14. */
03252 #define MPU_PROTENSET0_PROTREG14_Pos (14UL) /*!< Position of PROTREG14 field. */
03253 #define MPU_PROTENSET0_PROTREG14_Msk (0x1UL << MPU_PROTENSET0_PROTREG14_Pos) /*!< Bit mask of PROTREG14 field. */
03254 #define MPU_PROTENSET0_PROTREG14_Disabled (0UL) /*!< Protection disabled. */
03255 #define MPU_PROTENSET0_PROTREG14_Enabled (1UL) /*!< Protection enabled. */
03256 #define MPU_PROTENSET0_PROTREG14_Set (1UL) /*!< Enable protection on write. */
03257 
03258 /* Bit 13 : Protection enable for region 13. */
03259 #define MPU_PROTENSET0_PROTREG13_Pos (13UL) /*!< Position of PROTREG13 field. */
03260 #define MPU_PROTENSET0_PROTREG13_Msk (0x1UL << MPU_PROTENSET0_PROTREG13_Pos) /*!< Bit mask of PROTREG13 field. */
03261 #define MPU_PROTENSET0_PROTREG13_Disabled (0UL) /*!< Protection disabled. */
03262 #define MPU_PROTENSET0_PROTREG13_Enabled (1UL) /*!< Protection enabled. */
03263 #define MPU_PROTENSET0_PROTREG13_Set (1UL) /*!< Enable protection on write. */
03264 
03265 /* Bit 12 : Protection enable for region 12. */
03266 #define MPU_PROTENSET0_PROTREG12_Pos (12UL) /*!< Position of PROTREG12 field. */
03267 #define MPU_PROTENSET0_PROTREG12_Msk (0x1UL << MPU_PROTENSET0_PROTREG12_Pos) /*!< Bit mask of PROTREG12 field. */
03268 #define MPU_PROTENSET0_PROTREG12_Disabled (0UL) /*!< Protection disabled. */
03269 #define MPU_PROTENSET0_PROTREG12_Enabled (1UL) /*!< Protection enabled. */
03270 #define MPU_PROTENSET0_PROTREG12_Set (1UL) /*!< Enable protection on write. */
03271 
03272 /* Bit 11 : Protection enable for region 11. */
03273 #define MPU_PROTENSET0_PROTREG11_Pos (11UL) /*!< Position of PROTREG11 field. */
03274 #define MPU_PROTENSET0_PROTREG11_Msk (0x1UL << MPU_PROTENSET0_PROTREG11_Pos) /*!< Bit mask of PROTREG11 field. */
03275 #define MPU_PROTENSET0_PROTREG11_Disabled (0UL) /*!< Protection disabled. */
03276 #define MPU_PROTENSET0_PROTREG11_Enabled (1UL) /*!< Protection enabled. */
03277 #define MPU_PROTENSET0_PROTREG11_Set (1UL) /*!< Enable protection on write. */
03278 
03279 /* Bit 10 : Protection enable for region 10. */
03280 #define MPU_PROTENSET0_PROTREG10_Pos (10UL) /*!< Position of PROTREG10 field. */
03281 #define MPU_PROTENSET0_PROTREG10_Msk (0x1UL << MPU_PROTENSET0_PROTREG10_Pos) /*!< Bit mask of PROTREG10 field. */
03282 #define MPU_PROTENSET0_PROTREG10_Disabled (0UL) /*!< Protection disabled. */
03283 #define MPU_PROTENSET0_PROTREG10_Enabled (1UL) /*!< Protection enabled. */
03284 #define MPU_PROTENSET0_PROTREG10_Set (1UL) /*!< Enable protection on write. */
03285 
03286 /* Bit 9 : Protection enable for region 9. */
03287 #define MPU_PROTENSET0_PROTREG9_Pos (9UL) /*!< Position of PROTREG9 field. */
03288 #define MPU_PROTENSET0_PROTREG9_Msk (0x1UL << MPU_PROTENSET0_PROTREG9_Pos) /*!< Bit mask of PROTREG9 field. */
03289 #define MPU_PROTENSET0_PROTREG9_Disabled (0UL) /*!< Protection disabled. */
03290 #define MPU_PROTENSET0_PROTREG9_Enabled (1UL) /*!< Protection enabled. */
03291 #define MPU_PROTENSET0_PROTREG9_Set (1UL) /*!< Enable protection on write. */
03292 
03293 /* Bit 8 : Protection enable for region 8. */
03294 #define MPU_PROTENSET0_PROTREG8_Pos (8UL) /*!< Position of PROTREG8 field. */
03295 #define MPU_PROTENSET0_PROTREG8_Msk (0x1UL << MPU_PROTENSET0_PROTREG8_Pos) /*!< Bit mask of PROTREG8 field. */
03296 #define MPU_PROTENSET0_PROTREG8_Disabled (0UL) /*!< Protection disabled. */
03297 #define MPU_PROTENSET0_PROTREG8_Enabled (1UL) /*!< Protection enabled. */
03298 #define MPU_PROTENSET0_PROTREG8_Set (1UL) /*!< Enable protection on write. */
03299 
03300 /* Bit 7 : Protection enable for region 7. */
03301 #define MPU_PROTENSET0_PROTREG7_Pos (7UL) /*!< Position of PROTREG7 field. */
03302 #define MPU_PROTENSET0_PROTREG7_Msk (0x1UL << MPU_PROTENSET0_PROTREG7_Pos) /*!< Bit mask of PROTREG7 field. */
03303 #define MPU_PROTENSET0_PROTREG7_Disabled (0UL) /*!< Protection disabled. */
03304 #define MPU_PROTENSET0_PROTREG7_Enabled (1UL) /*!< Protection enabled. */
03305 #define MPU_PROTENSET0_PROTREG7_Set (1UL) /*!< Enable protection on write. */
03306 
03307 /* Bit 6 : Protection enable for region 6. */
03308 #define MPU_PROTENSET0_PROTREG6_Pos (6UL) /*!< Position of PROTREG6 field. */
03309 #define MPU_PROTENSET0_PROTREG6_Msk (0x1UL << MPU_PROTENSET0_PROTREG6_Pos) /*!< Bit mask of PROTREG6 field. */
03310 #define MPU_PROTENSET0_PROTREG6_Disabled (0UL) /*!< Protection disabled. */
03311 #define MPU_PROTENSET0_PROTREG6_Enabled (1UL) /*!< Protection enabled. */
03312 #define MPU_PROTENSET0_PROTREG6_Set (1UL) /*!< Enable protection on write. */
03313 
03314 /* Bit 5 : Protection enable for region 5. */
03315 #define MPU_PROTENSET0_PROTREG5_Pos (5UL) /*!< Position of PROTREG5 field. */
03316 #define MPU_PROTENSET0_PROTREG5_Msk (0x1UL << MPU_PROTENSET0_PROTREG5_Pos) /*!< Bit mask of PROTREG5 field. */
03317 #define MPU_PROTENSET0_PROTREG5_Disabled (0UL) /*!< Protection disabled. */
03318 #define MPU_PROTENSET0_PROTREG5_Enabled (1UL) /*!< Protection enabled. */
03319 #define MPU_PROTENSET0_PROTREG5_Set (1UL) /*!< Enable protection on write. */
03320 
03321 /* Bit 4 : Protection enable for region 4. */
03322 #define MPU_PROTENSET0_PROTREG4_Pos (4UL) /*!< Position of PROTREG4 field. */
03323 #define MPU_PROTENSET0_PROTREG4_Msk (0x1UL << MPU_PROTENSET0_PROTREG4_Pos) /*!< Bit mask of PROTREG4 field. */
03324 #define MPU_PROTENSET0_PROTREG4_Disabled (0UL) /*!< Protection disabled. */
03325 #define MPU_PROTENSET0_PROTREG4_Enabled (1UL) /*!< Protection enabled. */
03326 #define MPU_PROTENSET0_PROTREG4_Set (1UL) /*!< Enable protection on write. */
03327 
03328 /* Bit 3 : Protection enable for region 3. */
03329 #define MPU_PROTENSET0_PROTREG3_Pos (3UL) /*!< Position of PROTREG3 field. */
03330 #define MPU_PROTENSET0_PROTREG3_Msk (0x1UL << MPU_PROTENSET0_PROTREG3_Pos) /*!< Bit mask of PROTREG3 field. */
03331 #define MPU_PROTENSET0_PROTREG3_Disabled (0UL) /*!< Protection disabled. */
03332 #define MPU_PROTENSET0_PROTREG3_Enabled (1UL) /*!< Protection enabled. */
03333 #define MPU_PROTENSET0_PROTREG3_Set (1UL) /*!< Enable protection on write. */
03334 
03335 /* Bit 2 : Protection enable for region 2. */
03336 #define MPU_PROTENSET0_PROTREG2_Pos (2UL) /*!< Position of PROTREG2 field. */
03337 #define MPU_PROTENSET0_PROTREG2_Msk (0x1UL << MPU_PROTENSET0_PROTREG2_Pos) /*!< Bit mask of PROTREG2 field. */
03338 #define MPU_PROTENSET0_PROTREG2_Disabled (0UL) /*!< Protection disabled. */
03339 #define MPU_PROTENSET0_PROTREG2_Enabled (1UL) /*!< Protection enabled. */
03340 #define MPU_PROTENSET0_PROTREG2_Set (1UL) /*!< Enable protection on write. */
03341 
03342 /* Bit 1 : Protection enable for region 1. */
03343 #define MPU_PROTENSET0_PROTREG1_Pos (1UL) /*!< Position of PROTREG1 field. */
03344 #define MPU_PROTENSET0_PROTREG1_Msk (0x1UL << MPU_PROTENSET0_PROTREG1_Pos) /*!< Bit mask of PROTREG1 field. */
03345 #define MPU_PROTENSET0_PROTREG1_Disabled (0UL) /*!< Protection disabled. */
03346 #define MPU_PROTENSET0_PROTREG1_Enabled (1UL) /*!< Protection enabled. */
03347 #define MPU_PROTENSET0_PROTREG1_Set (1UL) /*!< Enable protection on write. */
03348 
03349 /* Bit 0 : Protection enable for region 0. */
03350 #define MPU_PROTENSET0_PROTREG0_Pos (0UL) /*!< Position of PROTREG0 field. */
03351 #define MPU_PROTENSET0_PROTREG0_Msk (0x1UL << MPU_PROTENSET0_PROTREG0_Pos) /*!< Bit mask of PROTREG0 field. */
03352 #define MPU_PROTENSET0_PROTREG0_Disabled (0UL) /*!< Protection disabled. */
03353 #define MPU_PROTENSET0_PROTREG0_Enabled (1UL) /*!< Protection enabled. */
03354 #define MPU_PROTENSET0_PROTREG0_Set (1UL) /*!< Enable protection on write. */
03355 
03356 /* Register: MPU_PROTENSET1 */
03357 /* Description: Erase and write protection bit enable set register. */
03358 
03359 /* Bit 31 : Protection enable for region 63. */
03360 #define MPU_PROTENSET1_PROTREG63_Pos (31UL) /*!< Position of PROTREG63 field. */
03361 #define MPU_PROTENSET1_PROTREG63_Msk (0x1UL << MPU_PROTENSET1_PROTREG63_Pos) /*!< Bit mask of PROTREG63 field. */
03362 #define MPU_PROTENSET1_PROTREG63_Disabled (0UL) /*!< Protection disabled. */
03363 #define MPU_PROTENSET1_PROTREG63_Enabled (1UL) /*!< Protection enabled. */
03364 #define MPU_PROTENSET1_PROTREG63_Set (1UL) /*!< Enable protection on write. */
03365 
03366 /* Bit 30 : Protection enable for region 62. */
03367 #define MPU_PROTENSET1_PROTREG62_Pos (30UL) /*!< Position of PROTREG62 field. */
03368 #define MPU_PROTENSET1_PROTREG62_Msk (0x1UL << MPU_PROTENSET1_PROTREG62_Pos) /*!< Bit mask of PROTREG62 field. */
03369 #define MPU_PROTENSET1_PROTREG62_Disabled (0UL) /*!< Protection disabled. */
03370 #define MPU_PROTENSET1_PROTREG62_Enabled (1UL) /*!< Protection enabled. */
03371 #define MPU_PROTENSET1_PROTREG62_Set (1UL) /*!< Enable protection on write. */
03372 
03373 /* Bit 29 : Protection enable for region 61. */
03374 #define MPU_PROTENSET1_PROTREG61_Pos (29UL) /*!< Position of PROTREG61 field. */
03375 #define MPU_PROTENSET1_PROTREG61_Msk (0x1UL << MPU_PROTENSET1_PROTREG61_Pos) /*!< Bit mask of PROTREG61 field. */
03376 #define MPU_PROTENSET1_PROTREG61_Disabled (0UL) /*!< Protection disabled. */
03377 #define MPU_PROTENSET1_PROTREG61_Enabled (1UL) /*!< Protection enabled. */
03378 #define MPU_PROTENSET1_PROTREG61_Set (1UL) /*!< Enable protection on write. */
03379 
03380 /* Bit 28 : Protection enable for region 60. */
03381 #define MPU_PROTENSET1_PROTREG60_Pos (28UL) /*!< Position of PROTREG60 field. */
03382 #define MPU_PROTENSET1_PROTREG60_Msk (0x1UL << MPU_PROTENSET1_PROTREG60_Pos) /*!< Bit mask of PROTREG60 field. */
03383 #define MPU_PROTENSET1_PROTREG60_Disabled (0UL) /*!< Protection disabled. */
03384 #define MPU_PROTENSET1_PROTREG60_Enabled (1UL) /*!< Protection enabled. */
03385 #define MPU_PROTENSET1_PROTREG60_Set (1UL) /*!< Enable protection on write. */
03386 
03387 /* Bit 27 : Protection enable for region 59. */
03388 #define MPU_PROTENSET1_PROTREG59_Pos (27UL) /*!< Position of PROTREG59 field. */
03389 #define MPU_PROTENSET1_PROTREG59_Msk (0x1UL << MPU_PROTENSET1_PROTREG59_Pos) /*!< Bit mask of PROTREG59 field. */
03390 #define MPU_PROTENSET1_PROTREG59_Disabled (0UL) /*!< Protection disabled. */
03391 #define MPU_PROTENSET1_PROTREG59_Enabled (1UL) /*!< Protection enabled. */
03392 #define MPU_PROTENSET1_PROTREG59_Set (1UL) /*!< Enable protection on write. */
03393 
03394 /* Bit 26 : Protection enable for region 58. */
03395 #define MPU_PROTENSET1_PROTREG58_Pos (26UL) /*!< Position of PROTREG58 field. */
03396 #define MPU_PROTENSET1_PROTREG58_Msk (0x1UL << MPU_PROTENSET1_PROTREG58_Pos) /*!< Bit mask of PROTREG58 field. */
03397 #define MPU_PROTENSET1_PROTREG58_Disabled (0UL) /*!< Protection disabled. */
03398 #define MPU_PROTENSET1_PROTREG58_Enabled (1UL) /*!< Protection enabled. */
03399 #define MPU_PROTENSET1_PROTREG58_Set (1UL) /*!< Enable protection on write. */
03400 
03401 /* Bit 25 : Protection enable for region 57. */
03402 #define MPU_PROTENSET1_PROTREG57_Pos (25UL) /*!< Position of PROTREG57 field. */
03403 #define MPU_PROTENSET1_PROTREG57_Msk (0x1UL << MPU_PROTENSET1_PROTREG57_Pos) /*!< Bit mask of PROTREG57 field. */
03404 #define MPU_PROTENSET1_PROTREG57_Disabled (0UL) /*!< Protection disabled. */
03405 #define MPU_PROTENSET1_PROTREG57_Enabled (1UL) /*!< Protection enabled. */
03406 #define MPU_PROTENSET1_PROTREG57_Set (1UL) /*!< Enable protection on write. */
03407 
03408 /* Bit 24 : Protection enable for region 56. */
03409 #define MPU_PROTENSET1_PROTREG56_Pos (24UL) /*!< Position of PROTREG56 field. */
03410 #define MPU_PROTENSET1_PROTREG56_Msk (0x1UL << MPU_PROTENSET1_PROTREG56_Pos) /*!< Bit mask of PROTREG56 field. */
03411 #define MPU_PROTENSET1_PROTREG56_Disabled (0UL) /*!< Protection disabled. */
03412 #define MPU_PROTENSET1_PROTREG56_Enabled (1UL) /*!< Protection enabled. */
03413 #define MPU_PROTENSET1_PROTREG56_Set (1UL) /*!< Enable protection on write. */
03414 
03415 /* Bit 23 : Protection enable for region 55. */
03416 #define MPU_PROTENSET1_PROTREG55_Pos (23UL) /*!< Position of PROTREG55 field. */
03417 #define MPU_PROTENSET1_PROTREG55_Msk (0x1UL << MPU_PROTENSET1_PROTREG55_Pos) /*!< Bit mask of PROTREG55 field. */
03418 #define MPU_PROTENSET1_PROTREG55_Disabled (0UL) /*!< Protection disabled. */
03419 #define MPU_PROTENSET1_PROTREG55_Enabled (1UL) /*!< Protection enabled. */
03420 #define MPU_PROTENSET1_PROTREG55_Set (1UL) /*!< Enable protection on write. */
03421 
03422 /* Bit 22 : Protection enable for region 54. */
03423 #define MPU_PROTENSET1_PROTREG54_Pos (22UL) /*!< Position of PROTREG54 field. */
03424 #define MPU_PROTENSET1_PROTREG54_Msk (0x1UL << MPU_PROTENSET1_PROTREG54_Pos) /*!< Bit mask of PROTREG54 field. */
03425 #define MPU_PROTENSET1_PROTREG54_Disabled (0UL) /*!< Protection disabled. */
03426 #define MPU_PROTENSET1_PROTREG54_Enabled (1UL) /*!< Protection enabled. */
03427 #define MPU_PROTENSET1_PROTREG54_Set (1UL) /*!< Enable protection on write. */
03428 
03429 /* Bit 21 : Protection enable for region 53. */
03430 #define MPU_PROTENSET1_PROTREG53_Pos (21UL) /*!< Position of PROTREG53 field. */
03431 #define MPU_PROTENSET1_PROTREG53_Msk (0x1UL << MPU_PROTENSET1_PROTREG53_Pos) /*!< Bit mask of PROTREG53 field. */
03432 #define MPU_PROTENSET1_PROTREG53_Disabled (0UL) /*!< Protection disabled. */
03433 #define MPU_PROTENSET1_PROTREG53_Enabled (1UL) /*!< Protection enabled. */
03434 #define MPU_PROTENSET1_PROTREG53_Set (1UL) /*!< Enable protection on write. */
03435 
03436 /* Bit 20 : Protection enable for region 52. */
03437 #define MPU_PROTENSET1_PROTREG52_Pos (20UL) /*!< Position of PROTREG52 field. */
03438 #define MPU_PROTENSET1_PROTREG52_Msk (0x1UL << MPU_PROTENSET1_PROTREG52_Pos) /*!< Bit mask of PROTREG52 field. */
03439 #define MPU_PROTENSET1_PROTREG52_Disabled (0UL) /*!< Protection disabled. */
03440 #define MPU_PROTENSET1_PROTREG52_Enabled (1UL) /*!< Protection enabled. */
03441 #define MPU_PROTENSET1_PROTREG52_Set (1UL) /*!< Enable protection on write. */
03442 
03443 /* Bit 19 : Protection enable for region 51. */
03444 #define MPU_PROTENSET1_PROTREG51_Pos (19UL) /*!< Position of PROTREG51 field. */
03445 #define MPU_PROTENSET1_PROTREG51_Msk (0x1UL << MPU_PROTENSET1_PROTREG51_Pos) /*!< Bit mask of PROTREG51 field. */
03446 #define MPU_PROTENSET1_PROTREG51_Disabled (0UL) /*!< Protection disabled. */
03447 #define MPU_PROTENSET1_PROTREG51_Enabled (1UL) /*!< Protection enabled. */
03448 #define MPU_PROTENSET1_PROTREG51_Set (1UL) /*!< Enable protection on write. */
03449 
03450 /* Bit 18 : Protection enable for region 50. */
03451 #define MPU_PROTENSET1_PROTREG50_Pos (18UL) /*!< Position of PROTREG50 field. */
03452 #define MPU_PROTENSET1_PROTREG50_Msk (0x1UL << MPU_PROTENSET1_PROTREG50_Pos) /*!< Bit mask of PROTREG50 field. */
03453 #define MPU_PROTENSET1_PROTREG50_Disabled (0UL) /*!< Protection disabled. */
03454 #define MPU_PROTENSET1_PROTREG50_Enabled (1UL) /*!< Protection enabled. */
03455 #define MPU_PROTENSET1_PROTREG50_Set (1UL) /*!< Enable protection on write. */
03456 
03457 /* Bit 17 : Protection enable for region 49. */
03458 #define MPU_PROTENSET1_PROTREG49_Pos (17UL) /*!< Position of PROTREG49 field. */
03459 #define MPU_PROTENSET1_PROTREG49_Msk (0x1UL << MPU_PROTENSET1_PROTREG49_Pos) /*!< Bit mask of PROTREG49 field. */
03460 #define MPU_PROTENSET1_PROTREG49_Disabled (0UL) /*!< Protection disabled. */
03461 #define MPU_PROTENSET1_PROTREG49_Enabled (1UL) /*!< Protection enabled. */
03462 #define MPU_PROTENSET1_PROTREG49_Set (1UL) /*!< Enable protection on write. */
03463 
03464 /* Bit 16 : Protection enable for region 48. */
03465 #define MPU_PROTENSET1_PROTREG48_Pos (16UL) /*!< Position of PROTREG48 field. */
03466 #define MPU_PROTENSET1_PROTREG48_Msk (0x1UL << MPU_PROTENSET1_PROTREG48_Pos) /*!< Bit mask of PROTREG48 field. */
03467 #define MPU_PROTENSET1_PROTREG48_Disabled (0UL) /*!< Protection disabled. */
03468 #define MPU_PROTENSET1_PROTREG48_Enabled (1UL) /*!< Protection enabled. */
03469 #define MPU_PROTENSET1_PROTREG48_Set (1UL) /*!< Enable protection on write. */
03470 
03471 /* Bit 15 : Protection enable for region 47. */
03472 #define MPU_PROTENSET1_PROTREG47_Pos (15UL) /*!< Position of PROTREG47 field. */
03473 #define MPU_PROTENSET1_PROTREG47_Msk (0x1UL << MPU_PROTENSET1_PROTREG47_Pos) /*!< Bit mask of PROTREG47 field. */
03474 #define MPU_PROTENSET1_PROTREG47_Disabled (0UL) /*!< Protection disabled. */
03475 #define MPU_PROTENSET1_PROTREG47_Enabled (1UL) /*!< Protection enabled. */
03476 #define MPU_PROTENSET1_PROTREG47_Set (1UL) /*!< Enable protection on write. */
03477 
03478 /* Bit 14 : Protection enable for region 46. */
03479 #define MPU_PROTENSET1_PROTREG46_Pos (14UL) /*!< Position of PROTREG46 field. */
03480 #define MPU_PROTENSET1_PROTREG46_Msk (0x1UL << MPU_PROTENSET1_PROTREG46_Pos) /*!< Bit mask of PROTREG46 field. */
03481 #define MPU_PROTENSET1_PROTREG46_Disabled (0UL) /*!< Protection disabled. */
03482 #define MPU_PROTENSET1_PROTREG46_Enabled (1UL) /*!< Protection enabled. */
03483 #define MPU_PROTENSET1_PROTREG46_Set (1UL) /*!< Enable protection on write. */
03484 
03485 /* Bit 13 : Protection enable for region 45. */
03486 #define MPU_PROTENSET1_PROTREG45_Pos (13UL) /*!< Position of PROTREG45 field. */
03487 #define MPU_PROTENSET1_PROTREG45_Msk (0x1UL << MPU_PROTENSET1_PROTREG45_Pos) /*!< Bit mask of PROTREG45 field. */
03488 #define MPU_PROTENSET1_PROTREG45_Disabled (0UL) /*!< Protection disabled. */
03489 #define MPU_PROTENSET1_PROTREG45_Enabled (1UL) /*!< Protection enabled. */
03490 #define MPU_PROTENSET1_PROTREG45_Set (1UL) /*!< Enable protection on write. */
03491 
03492 /* Bit 12 : Protection enable for region 44. */
03493 #define MPU_PROTENSET1_PROTREG44_Pos (12UL) /*!< Position of PROTREG44 field. */
03494 #define MPU_PROTENSET1_PROTREG44_Msk (0x1UL << MPU_PROTENSET1_PROTREG44_Pos) /*!< Bit mask of PROTREG44 field. */
03495 #define MPU_PROTENSET1_PROTREG44_Disabled (0UL) /*!< Protection disabled. */
03496 #define MPU_PROTENSET1_PROTREG44_Enabled (1UL) /*!< Protection enabled. */
03497 #define MPU_PROTENSET1_PROTREG44_Set (1UL) /*!< Enable protection on write. */
03498 
03499 /* Bit 11 : Protection enable for region 43. */
03500 #define MPU_PROTENSET1_PROTREG43_Pos (11UL) /*!< Position of PROTREG43 field. */
03501 #define MPU_PROTENSET1_PROTREG43_Msk (0x1UL << MPU_PROTENSET1_PROTREG43_Pos) /*!< Bit mask of PROTREG43 field. */
03502 #define MPU_PROTENSET1_PROTREG43_Disabled (0UL) /*!< Protection disabled. */
03503 #define MPU_PROTENSET1_PROTREG43_Enabled (1UL) /*!< Protection enabled. */
03504 #define MPU_PROTENSET1_PROTREG43_Set (1UL) /*!< Enable protection on write. */
03505 
03506 /* Bit 10 : Protection enable for region 42. */
03507 #define MPU_PROTENSET1_PROTREG42_Pos (10UL) /*!< Position of PROTREG42 field. */
03508 #define MPU_PROTENSET1_PROTREG42_Msk (0x1UL << MPU_PROTENSET1_PROTREG42_Pos) /*!< Bit mask of PROTREG42 field. */
03509 #define MPU_PROTENSET1_PROTREG42_Disabled (0UL) /*!< Protection disabled. */
03510 #define MPU_PROTENSET1_PROTREG42_Enabled (1UL) /*!< Protection enabled. */
03511 #define MPU_PROTENSET1_PROTREG42_Set (1UL) /*!< Enable protection on write. */
03512 
03513 /* Bit 9 : Protection enable for region 41. */
03514 #define MPU_PROTENSET1_PROTREG41_Pos (9UL) /*!< Position of PROTREG41 field. */
03515 #define MPU_PROTENSET1_PROTREG41_Msk (0x1UL << MPU_PROTENSET1_PROTREG41_Pos) /*!< Bit mask of PROTREG41 field. */
03516 #define MPU_PROTENSET1_PROTREG41_Disabled (0UL) /*!< Protection disabled. */
03517 #define MPU_PROTENSET1_PROTREG41_Enabled (1UL) /*!< Protection enabled. */
03518 #define MPU_PROTENSET1_PROTREG41_Set (1UL) /*!< Enable protection on write. */
03519 
03520 /* Bit 8 : Protection enable for region 40. */
03521 #define MPU_PROTENSET1_PROTREG40_Pos (8UL) /*!< Position of PROTREG40 field. */
03522 #define MPU_PROTENSET1_PROTREG40_Msk (0x1UL << MPU_PROTENSET1_PROTREG40_Pos) /*!< Bit mask of PROTREG40 field. */
03523 #define MPU_PROTENSET1_PROTREG40_Disabled (0UL) /*!< Protection disabled. */
03524 #define MPU_PROTENSET1_PROTREG40_Enabled (1UL) /*!< Protection enabled. */
03525 #define MPU_PROTENSET1_PROTREG40_Set (1UL) /*!< Enable protection on write. */
03526 
03527 /* Bit 7 : Protection enable for region 39. */
03528 #define MPU_PROTENSET1_PROTREG39_Pos (7UL) /*!< Position of PROTREG39 field. */
03529 #define MPU_PROTENSET1_PROTREG39_Msk (0x1UL << MPU_PROTENSET1_PROTREG39_Pos) /*!< Bit mask of PROTREG39 field. */
03530 #define MPU_PROTENSET1_PROTREG39_Disabled (0UL) /*!< Protection disabled. */
03531 #define MPU_PROTENSET1_PROTREG39_Enabled (1UL) /*!< Protection enabled. */
03532 #define MPU_PROTENSET1_PROTREG39_Set (1UL) /*!< Enable protection on write. */
03533 
03534 /* Bit 6 : Protection enable for region 38. */
03535 #define MPU_PROTENSET1_PROTREG38_Pos (6UL) /*!< Position of PROTREG38 field. */
03536 #define MPU_PROTENSET1_PROTREG38_Msk (0x1UL << MPU_PROTENSET1_PROTREG38_Pos) /*!< Bit mask of PROTREG38 field. */
03537 #define MPU_PROTENSET1_PROTREG38_Disabled (0UL) /*!< Protection disabled. */
03538 #define MPU_PROTENSET1_PROTREG38_Enabled (1UL) /*!< Protection enabled. */
03539 #define MPU_PROTENSET1_PROTREG38_Set (1UL) /*!< Enable protection on write. */
03540 
03541 /* Bit 5 : Protection enable for region 37. */
03542 #define MPU_PROTENSET1_PROTREG37_Pos (5UL) /*!< Position of PROTREG37 field. */
03543 #define MPU_PROTENSET1_PROTREG37_Msk (0x1UL << MPU_PROTENSET1_PROTREG37_Pos) /*!< Bit mask of PROTREG37 field. */
03544 #define MPU_PROTENSET1_PROTREG37_Disabled (0UL) /*!< Protection disabled. */
03545 #define MPU_PROTENSET1_PROTREG37_Enabled (1UL) /*!< Protection enabled. */
03546 #define MPU_PROTENSET1_PROTREG37_Set (1UL) /*!< Enable protection on write. */
03547 
03548 /* Bit 4 : Protection enable for region 36. */
03549 #define MPU_PROTENSET1_PROTREG36_Pos (4UL) /*!< Position of PROTREG36 field. */
03550 #define MPU_PROTENSET1_PROTREG36_Msk (0x1UL << MPU_PROTENSET1_PROTREG36_Pos) /*!< Bit mask of PROTREG36 field. */
03551 #define MPU_PROTENSET1_PROTREG36_Disabled (0UL) /*!< Protection disabled. */
03552 #define MPU_PROTENSET1_PROTREG36_Enabled (1UL) /*!< Protection enabled. */
03553 #define MPU_PROTENSET1_PROTREG36_Set (1UL) /*!< Enable protection on write. */
03554 
03555 /* Bit 3 : Protection enable for region 35. */
03556 #define MPU_PROTENSET1_PROTREG35_Pos (3UL) /*!< Position of PROTREG35 field. */
03557 #define MPU_PROTENSET1_PROTREG35_Msk (0x1UL << MPU_PROTENSET1_PROTREG35_Pos) /*!< Bit mask of PROTREG35 field. */
03558 #define MPU_PROTENSET1_PROTREG35_Disabled (0UL) /*!< Protection disabled. */
03559 #define MPU_PROTENSET1_PROTREG35_Enabled (1UL) /*!< Protection enabled. */
03560 #define MPU_PROTENSET1_PROTREG35_Set (1UL) /*!< Enable protection on write. */
03561 
03562 /* Bit 2 : Protection enable for region 34. */
03563 #define MPU_PROTENSET1_PROTREG34_Pos (2UL) /*!< Position of PROTREG34 field. */
03564 #define MPU_PROTENSET1_PROTREG34_Msk (0x1UL << MPU_PROTENSET1_PROTREG34_Pos) /*!< Bit mask of PROTREG34 field. */
03565 #define MPU_PROTENSET1_PROTREG34_Disabled (0UL) /*!< Protection disabled. */
03566 #define MPU_PROTENSET1_PROTREG34_Enabled (1UL) /*!< Protection enabled. */
03567 #define MPU_PROTENSET1_PROTREG34_Set (1UL) /*!< Enable protection on write. */
03568 
03569 /* Bit 1 : Protection enable for region 33. */
03570 #define MPU_PROTENSET1_PROTREG33_Pos (1UL) /*!< Position of PROTREG33 field. */
03571 #define MPU_PROTENSET1_PROTREG33_Msk (0x1UL << MPU_PROTENSET1_PROTREG33_Pos) /*!< Bit mask of PROTREG33 field. */
03572 #define MPU_PROTENSET1_PROTREG33_Disabled (0UL) /*!< Protection disabled. */
03573 #define MPU_PROTENSET1_PROTREG33_Enabled (1UL) /*!< Protection enabled. */
03574 #define MPU_PROTENSET1_PROTREG33_Set (1UL) /*!< Enable protection on write. */
03575 
03576 /* Bit 0 : Protection enable for region 32. */
03577 #define MPU_PROTENSET1_PROTREG32_Pos (0UL) /*!< Position of PROTREG32 field. */
03578 #define MPU_PROTENSET1_PROTREG32_Msk (0x1UL << MPU_PROTENSET1_PROTREG32_Pos) /*!< Bit mask of PROTREG32 field. */
03579 #define MPU_PROTENSET1_PROTREG32_Disabled (0UL) /*!< Protection disabled. */
03580 #define MPU_PROTENSET1_PROTREG32_Enabled (1UL) /*!< Protection enabled. */
03581 #define MPU_PROTENSET1_PROTREG32_Set (1UL) /*!< Enable protection on write. */
03582 
03583 /* Register: MPU_DISABLEINDEBUG */
03584 /* Description: Disable erase and write protection mechanism in debug mode. */
03585 
03586 /* Bit 0 : Disable protection mechanism in debug mode. */
03587 #define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */
03588 #define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */
03589 #define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Protection enabled. */
03590 #define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Protection disabled. */
03591 
03592 /* Register: MPU_PROTBLOCKSIZE */
03593 /* Description: Erase and write protection block size. */
03594 
03595 /* Bits 1..0 : Erase and write protection block size. */
03596 #define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos (0UL) /*!< Position of PROTBLOCKSIZE field. */
03597 #define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Msk (0x3UL << MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos) /*!< Bit mask of PROTBLOCKSIZE field. */
03598 #define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_4k (0UL) /*!< Erase and write protection block size is 4k. */
03599 
03600 
03601 /* Peripheral: NVMC */
03602 /* Description: Non Volatile Memory Controller. */
03603 
03604 /* Register: NVMC_READY */
03605 /* Description: Ready flag. */
03606 
03607 /* Bit 0 : NVMC ready. */
03608 #define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */
03609 #define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */
03610 #define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */
03611 #define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready. */
03612 
03613 /* Register: NVMC_CONFIG */
03614 /* Description: Configuration register. */
03615 
03616 /* Bits 1..0 : Program write enable. */
03617 #define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */
03618 #define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */
03619 #define NVMC_CONFIG_WEN_Ren (0x00UL) /*!< Read only access. */
03620 #define NVMC_CONFIG_WEN_Wen (0x01UL) /*!< Write enabled. */
03621 #define NVMC_CONFIG_WEN_Een (0x02UL) /*!< Erase enabled. */
03622 
03623 /* Register: NVMC_ERASEALL */
03624 /* Description: Register for erasing all non-volatile user memory. */
03625 
03626 /* Bit 0 : Starts the erasing of all user NVM (code region 0/1 and UICR registers). */
03627 #define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */
03628 #define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */
03629 #define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation. */
03630 #define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase. */
03631 
03632 /* Register: NVMC_ERASEUICR */
03633 /* Description: Register for start erasing User Information Congfiguration Registers. */
03634 
03635 /* Bit 0 : It can only be used when all contents of code region 1 are erased. */
03636 #define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */
03637 #define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */
03638 #define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation. */
03639 #define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start UICR erase. */
03640 
03641 
03642 /* Peripheral: POWER */
03643 /* Description: Power Control. */
03644 
03645 /* Register: POWER_INTENSET */
03646 /* Description: Interrupt enable set register. */
03647 
03648 /* Bit 2 : Enable interrupt on POFWARN event. */
03649 #define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */
03650 #define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */
03651 #define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */
03652 #define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */
03653 #define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable interrupt on write. */
03654 
03655 /* Register: POWER_INTENCLR */
03656 /* Description: Interrupt enable clear register. */
03657 
03658 /* Bit 2 : Disable interrupt on POFWARN event. */
03659 #define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */
03660 #define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */
03661 #define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */
03662 #define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */
03663 #define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable interrupt on write. */
03664 
03665 /* Register: POWER_RESETREAS */
03666 /* Description: Reset reason. */
03667 
03668 /* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */
03669 #define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */
03670 #define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */
03671 #define POWER_RESETREAS_DIF_NotDetected (0UL) /*!< Reset not detected. */
03672 #define POWER_RESETREAS_DIF_Detected (1UL) /*!< Reset detected. */
03673 
03674 /* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */
03675 #define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */
03676 #define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */
03677 #define POWER_RESETREAS_LPCOMP_NotDetected (0UL) /*!< Reset not detected. */
03678 #define POWER_RESETREAS_LPCOMP_Detected (1UL) /*!< Reset detected. */
03679 
03680 /* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */
03681 #define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */
03682 #define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */
03683 #define POWER_RESETREAS_OFF_NotDetected (0UL) /*!< Reset not detected. */
03684 #define POWER_RESETREAS_OFF_Detected (1UL) /*!< Reset detected. */
03685 
03686 /* Bit 3 : Reset from CPU lock-up detected. */
03687 #define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */
03688 #define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */
03689 #define POWER_RESETREAS_LOCKUP_NotDetected (0UL) /*!< Reset not detected. */
03690 #define POWER_RESETREAS_LOCKUP_Detected (1UL) /*!< Reset detected. */
03691 
03692 /* Bit 2 : Reset from AIRCR.SYSRESETREQ detected. */
03693 #define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */
03694 #define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */
03695 #define POWER_RESETREAS_SREQ_NotDetected (0UL) /*!< Reset not detected. */
03696 #define POWER_RESETREAS_SREQ_Detected (1UL) /*!< Reset detected. */
03697 
03698 /* Bit 1 : Reset from watchdog detected. */
03699 #define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */
03700 #define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */
03701 #define POWER_RESETREAS_DOG_NotDetected (0UL) /*!< Reset not detected. */
03702 #define POWER_RESETREAS_DOG_Detected (1UL) /*!< Reset detected. */
03703 
03704 /* Bit 0 : Reset from pin-reset detected. */
03705 #define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */
03706 #define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */
03707 #define POWER_RESETREAS_RESETPIN_NotDetected (0UL) /*!< Reset not detected. */
03708 #define POWER_RESETREAS_RESETPIN_Detected (1UL) /*!< Reset detected. */
03709 
03710 /* Register: POWER_RAMSTATUS */
03711 /* Description: Ram status register. */
03712 
03713 /* Bit 3 : RAM block 3 status. */
03714 #define POWER_RAMSTATUS_RAMBLOCK3_Pos (3UL) /*!< Position of RAMBLOCK3 field. */
03715 #define POWER_RAMSTATUS_RAMBLOCK3_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK3_Pos) /*!< Bit mask of RAMBLOCK3 field. */
03716 #define POWER_RAMSTATUS_RAMBLOCK3_Off (0UL) /*!< RAM block 3 is off or powering up. */
03717 #define POWER_RAMSTATUS_RAMBLOCK3_On (1UL) /*!< RAM block 3 is on. */
03718 
03719 /* Bit 2 : RAM block 2 status. */
03720 #define POWER_RAMSTATUS_RAMBLOCK2_Pos (2UL) /*!< Position of RAMBLOCK2 field. */
03721 #define POWER_RAMSTATUS_RAMBLOCK2_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK2_Pos) /*!< Bit mask of RAMBLOCK2 field. */
03722 #define POWER_RAMSTATUS_RAMBLOCK2_Off (0UL) /*!< RAM block 2 is off or powering up. */
03723 #define POWER_RAMSTATUS_RAMBLOCK2_On (1UL) /*!< RAM block 2 is on. */
03724 
03725 /* Bit 1 : RAM block 1 status. */
03726 #define POWER_RAMSTATUS_RAMBLOCK1_Pos (1UL) /*!< Position of RAMBLOCK1 field. */
03727 #define POWER_RAMSTATUS_RAMBLOCK1_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK1_Pos) /*!< Bit mask of RAMBLOCK1 field. */
03728 #define POWER_RAMSTATUS_RAMBLOCK1_Off (0UL) /*!< RAM block 1 is off or powering up. */
03729 #define POWER_RAMSTATUS_RAMBLOCK1_On (1UL) /*!< RAM block 1 is on. */
03730 
03731 /* Bit 0 : RAM block 0 status. */
03732 #define POWER_RAMSTATUS_RAMBLOCK0_Pos (0UL) /*!< Position of RAMBLOCK0 field. */
03733 #define POWER_RAMSTATUS_RAMBLOCK0_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK0_Pos) /*!< Bit mask of RAMBLOCK0 field. */
03734 #define POWER_RAMSTATUS_RAMBLOCK0_Off (0UL) /*!< RAM block 0 is off or powering up. */
03735 #define POWER_RAMSTATUS_RAMBLOCK0_On (1UL) /*!< RAM block 0 is on. */
03736 
03737 /* Register: POWER_SYSTEMOFF */
03738 /* Description: System off register. */
03739 
03740 /* Bit 0 : Enter system off mode. */
03741 #define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */
03742 #define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */
03743 #define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enter system off mode. */
03744 
03745 /* Register: POWER_POFCON */
03746 /* Description: Power failure configuration. */
03747 
03748 /* Bits 2..1 : Set threshold level. */
03749 #define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */
03750 #define POWER_POFCON_THRESHOLD_Msk (0x3UL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */
03751 #define POWER_POFCON_THRESHOLD_V21 (0x00UL) /*!< Set threshold to 2.1Volts. */
03752 #define POWER_POFCON_THRESHOLD_V23 (0x01UL) /*!< Set threshold to 2.3Volts. */
03753 #define POWER_POFCON_THRESHOLD_V25 (0x02UL) /*!< Set threshold to 2.5Volts. */
03754 #define POWER_POFCON_THRESHOLD_V27 (0x03UL) /*!< Set threshold to 2.7Volts. */
03755 
03756 /* Bit 0 : Power failure comparator enable. */
03757 #define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */
03758 #define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */
03759 #define POWER_POFCON_POF_Disabled (0UL) /*!< Disabled. */
03760 #define POWER_POFCON_POF_Enabled (1UL) /*!< Enabled. */
03761 
03762 /* Register: POWER_GPREGRET */
03763 /* Description: General purpose retention register. This register is a retained register. */
03764 
03765 /* Bits 7..0 : General purpose retention register. */
03766 #define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */
03767 #define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */
03768 
03769 /* Register: POWER_RAMON */
03770 /* Description: Ram on/off. */
03771 
03772 /* Bit 17 : RAM block 1 behaviour in OFF mode. */
03773 #define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */
03774 #define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */
03775 #define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in OFF mode. */
03776 #define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< RAM block 1 ON in OFF mode. */
03777 
03778 /* Bit 16 : RAM block 0 behaviour in OFF mode. */
03779 #define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */
03780 #define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */
03781 #define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in OFF mode. */
03782 #define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< RAM block 0 ON in OFF mode. */
03783 
03784 /* Bit 1 : RAM block 1 behaviour in ON mode. */
03785 #define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */
03786 #define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */
03787 #define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in ON mode. */
03788 #define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< RAM block 1 ON in ON mode. */
03789 
03790 /* Bit 0 : RAM block 0 behaviour in ON mode. */
03791 #define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */
03792 #define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */
03793 #define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in ON mode. */
03794 #define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< RAM block 0 ON in ON mode. */
03795 
03796 /* Register: POWER_RESET */
03797 /* Description: Pin reset functionality configuration register. This register is a retained register. */
03798 
03799 /* Bit 0 : Enable or disable pin reset in debug interface mode. */
03800 #define POWER_RESET_RESET_Pos (0UL) /*!< Position of RESET field. */
03801 #define POWER_RESET_RESET_Msk (0x1UL << POWER_RESET_RESET_Pos) /*!< Bit mask of RESET field. */
03802 #define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */
03803 #define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */
03804 
03805 /* Register: POWER_RAMONB */
03806 /* Description: Ram on/off. */
03807 
03808 /* Bit 17 : RAM block 3 behaviour in OFF mode. */
03809 #define POWER_RAMONB_OFFRAM3_Pos (17UL) /*!< Position of OFFRAM3 field. */
03810 #define POWER_RAMONB_OFFRAM3_Msk (0x1UL << POWER_RAMONB_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */
03811 #define POWER_RAMONB_OFFRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in OFF mode. */
03812 #define POWER_RAMONB_OFFRAM3_RAM3On (1UL) /*!< RAM block 3 ON in OFF mode. */
03813 
03814 /* Bit 16 : RAM block 2 behaviour in OFF mode. */
03815 #define POWER_RAMONB_OFFRAM2_Pos (16UL) /*!< Position of OFFRAM2 field. */
03816 #define POWER_RAMONB_OFFRAM2_Msk (0x1UL << POWER_RAMONB_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */
03817 #define POWER_RAMONB_OFFRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in OFF mode. */
03818 #define POWER_RAMONB_OFFRAM2_RAM2On (1UL) /*!< RAM block 2 ON in OFF mode. */
03819 
03820 /* Bit 1 : RAM block 3 behaviour in ON mode. */
03821 #define POWER_RAMONB_ONRAM3_Pos (1UL) /*!< Position of ONRAM3 field. */
03822 #define POWER_RAMONB_ONRAM3_Msk (0x1UL << POWER_RAMONB_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */
03823 #define POWER_RAMONB_ONRAM3_RAM3Off (0UL) /*!< RAM block 33 OFF in ON mode. */
03824 #define POWER_RAMONB_ONRAM3_RAM3On (1UL) /*!< RAM block 3 ON in ON mode. */
03825 
03826 /* Bit 0 : RAM block 2 behaviour in ON mode. */
03827 #define POWER_RAMONB_ONRAM2_Pos (0UL) /*!< Position of ONRAM2 field. */
03828 #define POWER_RAMONB_ONRAM2_Msk (0x1UL << POWER_RAMONB_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */
03829 #define POWER_RAMONB_ONRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in ON mode. */
03830 #define POWER_RAMONB_ONRAM2_RAM2On (1UL) /*!< RAM block 2 ON in ON mode. */
03831 
03832 /* Register: POWER_DCDCEN */
03833 /* Description: DCDC converter enable configuration register. */
03834 
03835 /* Bit 0 : Enable DCDC converter. */
03836 #define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */
03837 #define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */
03838 #define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< DCDC converter disabled. */
03839 #define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< DCDC converter enabled. */
03840 
03841 /* Register: POWER_DCDCFORCE */
03842 /* Description: DCDC power-up force register. */
03843 
03844 /* Bit 1 : DCDC power-up force on. */
03845 #define POWER_DCDCFORCE_FORCEON_Pos (1UL) /*!< Position of FORCEON field. */
03846 #define POWER_DCDCFORCE_FORCEON_Msk (0x1UL << POWER_DCDCFORCE_FORCEON_Pos) /*!< Bit mask of FORCEON field. */
03847 #define POWER_DCDCFORCE_FORCEON_NoForce (0UL) /*!< No force. */
03848 #define POWER_DCDCFORCE_FORCEON_Force (1UL) /*!< Force. */
03849 
03850 /* Bit 0 : DCDC power-up force off. */
03851 #define POWER_DCDCFORCE_FORCEOFF_Pos (0UL) /*!< Position of FORCEOFF field. */
03852 #define POWER_DCDCFORCE_FORCEOFF_Msk (0x1UL << POWER_DCDCFORCE_FORCEOFF_Pos) /*!< Bit mask of FORCEOFF field. */
03853 #define POWER_DCDCFORCE_FORCEOFF_NoForce (0UL) /*!< No force. */
03854 #define POWER_DCDCFORCE_FORCEOFF_Force (1UL) /*!< Force. */
03855 
03856 
03857 /* Peripheral: PPI */
03858 /* Description: PPI controller. */
03859 
03860 /* Register: PPI_CHEN */
03861 /* Description: Channel enable. */
03862 
03863 /* Bit 31 : Enable PPI channel 31. */
03864 #define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */
03865 #define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */
03866 #define PPI_CHEN_CH31_Disabled (0UL) /*!< Channel disabled. */
03867 #define PPI_CHEN_CH31_Enabled (1UL) /*!< Channel enabled. */
03868 
03869 /* Bit 30 : Enable PPI channel 30. */
03870 #define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */
03871 #define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */
03872 #define PPI_CHEN_CH30_Disabled (0UL) /*!< Channel disabled. */
03873 #define PPI_CHEN_CH30_Enabled (1UL) /*!< Channel enabled. */
03874 
03875 /* Bit 29 : Enable PPI channel 29. */
03876 #define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */
03877 #define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */
03878 #define PPI_CHEN_CH29_Disabled (0UL) /*!< Channel disabled. */
03879 #define PPI_CHEN_CH29_Enabled (1UL) /*!< Channel enabled. */
03880 
03881 /* Bit 28 : Enable PPI channel 28. */
03882 #define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */
03883 #define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */
03884 #define PPI_CHEN_CH28_Disabled (0UL) /*!< Channel disabled. */
03885 #define PPI_CHEN_CH28_Enabled (1UL) /*!< Channel enabled. */
03886 
03887 /* Bit 27 : Enable PPI channel 27. */
03888 #define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */
03889 #define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */
03890 #define PPI_CHEN_CH27_Disabled (0UL) /*!< Channel disabled. */
03891 #define PPI_CHEN_CH27_Enabled (1UL) /*!< Channel enabled. */
03892 
03893 /* Bit 26 : Enable PPI channel 26. */
03894 #define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */
03895 #define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */
03896 #define PPI_CHEN_CH26_Disabled (0UL) /*!< Channel disabled. */
03897 #define PPI_CHEN_CH26_Enabled (1UL) /*!< Channel enabled. */
03898 
03899 /* Bit 25 : Enable PPI channel 25. */
03900 #define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */
03901 #define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */
03902 #define PPI_CHEN_CH25_Disabled (0UL) /*!< Channel disabled. */
03903 #define PPI_CHEN_CH25_Enabled (1UL) /*!< Channel enabled. */
03904 
03905 /* Bit 24 : Enable PPI channel 24. */
03906 #define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */
03907 #define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */
03908 #define PPI_CHEN_CH24_Disabled (0UL) /*!< Channel disabled. */
03909 #define PPI_CHEN_CH24_Enabled (1UL) /*!< Channel enabled. */
03910 
03911 /* Bit 23 : Enable PPI channel 23. */
03912 #define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */
03913 #define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */
03914 #define PPI_CHEN_CH23_Disabled (0UL) /*!< Channel disabled. */
03915 #define PPI_CHEN_CH23_Enabled (1UL) /*!< Channel enabled. */
03916 
03917 /* Bit 22 : Enable PPI channel 22. */
03918 #define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */
03919 #define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */
03920 #define PPI_CHEN_CH22_Disabled (0UL) /*!< Channel disabled. */
03921 #define PPI_CHEN_CH22_Enabled (1UL) /*!< Channel enabled. */
03922 
03923 /* Bit 21 : Enable PPI channel 21. */
03924 #define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */
03925 #define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */
03926 #define PPI_CHEN_CH21_Disabled (0UL) /*!< Channel disabled. */
03927 #define PPI_CHEN_CH21_Enabled (1UL) /*!< Channel enabled. */
03928 
03929 /* Bit 20 : Enable PPI channel 20. */
03930 #define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */
03931 #define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */
03932 #define PPI_CHEN_CH20_Disabled (0UL) /*!< Channel disabled. */
03933 #define PPI_CHEN_CH20_Enabled (1UL) /*!< Channel enabled. */
03934 
03935 /* Bit 15 : Enable PPI channel 15. */
03936 #define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */
03937 #define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */
03938 #define PPI_CHEN_CH15_Disabled (0UL) /*!< Channel disabled. */
03939 #define PPI_CHEN_CH15_Enabled (1UL) /*!< Channel enabled. */
03940 
03941 /* Bit 14 : Enable PPI channel 14. */
03942 #define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */
03943 #define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */
03944 #define PPI_CHEN_CH14_Disabled (0UL) /*!< Channel disabled. */
03945 #define PPI_CHEN_CH14_Enabled (1UL) /*!< Channel enabled. */
03946 
03947 /* Bit 13 : Enable PPI channel 13. */
03948 #define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */
03949 #define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */
03950 #define PPI_CHEN_CH13_Disabled (0UL) /*!< Channel disabled. */
03951 #define PPI_CHEN_CH13_Enabled (1UL) /*!< Channel enabled. */
03952 
03953 /* Bit 12 : Enable PPI channel 12. */
03954 #define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */
03955 #define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */
03956 #define PPI_CHEN_CH12_Disabled (0UL) /*!< Channel disabled. */
03957 #define PPI_CHEN_CH12_Enabled (1UL) /*!< Channel enabled. */
03958 
03959 /* Bit 11 : Enable PPI channel 11. */
03960 #define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */
03961 #define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */
03962 #define PPI_CHEN_CH11_Disabled (0UL) /*!< Channel disabled. */
03963 #define PPI_CHEN_CH11_Enabled (1UL) /*!< Channel enabled. */
03964 
03965 /* Bit 10 : Enable PPI channel 10. */
03966 #define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */
03967 #define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */
03968 #define PPI_CHEN_CH10_Disabled (0UL) /*!< Channel disabled. */
03969 #define PPI_CHEN_CH10_Enabled (1UL) /*!< Channel enabled. */
03970 
03971 /* Bit 9 : Enable PPI channel 9. */
03972 #define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */
03973 #define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */
03974 #define PPI_CHEN_CH9_Disabled (0UL) /*!< Channel disabled. */
03975 #define PPI_CHEN_CH9_Enabled (1UL) /*!< Channel enabled. */
03976 
03977 /* Bit 8 : Enable PPI channel 8. */
03978 #define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */
03979 #define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */
03980 #define PPI_CHEN_CH8_Disabled (0UL) /*!< Channel disabled. */
03981 #define PPI_CHEN_CH8_Enabled (1UL) /*!< Channel enabled. */
03982 
03983 /* Bit 7 : Enable PPI channel 7. */
03984 #define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */
03985 #define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */
03986 #define PPI_CHEN_CH7_Disabled (0UL) /*!< Channel disabled. */
03987 #define PPI_CHEN_CH7_Enabled (1UL) /*!< Channel enabled. */
03988 
03989 /* Bit 6 : Enable PPI channel 6. */
03990 #define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */
03991 #define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */
03992 #define PPI_CHEN_CH6_Disabled (0UL) /*!< Channel disabled. */
03993 #define PPI_CHEN_CH6_Enabled (1UL) /*!< Channel enabled. */
03994 
03995 /* Bit 5 : Enable PPI channel 5. */
03996 #define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */
03997 #define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */
03998 #define PPI_CHEN_CH5_Disabled (0UL) /*!< Channel disabled. */
03999 #define PPI_CHEN_CH5_Enabled (1UL) /*!< Channel enabled. */
04000 
04001 /* Bit 4 : Enable PPI channel 4. */
04002 #define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */
04003 #define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */
04004 #define PPI_CHEN_CH4_Disabled (0UL) /*!< Channel disabled. */
04005 #define PPI_CHEN_CH4_Enabled (1UL) /*!< Channel enabled. */
04006 
04007 /* Bit 3 : Enable PPI channel 3. */
04008 #define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */
04009 #define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */
04010 #define PPI_CHEN_CH3_Disabled (0UL) /*!< Channel disabled */
04011 #define PPI_CHEN_CH3_Enabled (1UL) /*!< Channel enabled */
04012 
04013 /* Bit 2 : Enable PPI channel 2. */
04014 #define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */
04015 #define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */
04016 #define PPI_CHEN_CH2_Disabled (0UL) /*!< Channel disabled. */
04017 #define PPI_CHEN_CH2_Enabled (1UL) /*!< Channel enabled. */
04018 
04019 /* Bit 1 : Enable PPI channel 1. */
04020 #define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */
04021 #define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */
04022 #define PPI_CHEN_CH1_Disabled (0UL) /*!< Channel disabled. */
04023 #define PPI_CHEN_CH1_Enabled (1UL) /*!< Channel enabled. */
04024 
04025 /* Bit 0 : Enable PPI channel 0. */
04026 #define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */
04027 #define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */
04028 #define PPI_CHEN_CH0_Disabled (0UL) /*!< Channel disabled. */
04029 #define PPI_CHEN_CH0_Enabled (1UL) /*!< Channel enabled. */
04030 
04031 /* Register: PPI_CHENSET */
04032 /* Description: Channel enable set. */
04033 
04034 /* Bit 31 : Enable PPI channel 31. */
04035 #define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */
04036 #define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */
04037 #define PPI_CHENSET_CH31_Disabled (0UL) /*!< Channel disabled. */
04038 #define PPI_CHENSET_CH31_Enabled (1UL) /*!< Channel enabled. */
04039 #define PPI_CHENSET_CH31_Set (1UL) /*!< Enable channel on write. */
04040 
04041 /* Bit 30 : Enable PPI channel 30. */
04042 #define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */
04043 #define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */
04044 #define PPI_CHENSET_CH30_Disabled (0UL) /*!< Channel disabled. */
04045 #define PPI_CHENSET_CH30_Enabled (1UL) /*!< Channel enabled. */
04046 #define PPI_CHENSET_CH30_Set (1UL) /*!< Enable channel on write. */
04047 
04048 /* Bit 29 : Enable PPI channel 29. */
04049 #define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */
04050 #define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */
04051 #define PPI_CHENSET_CH29_Disabled (0UL) /*!< Channel disabled. */
04052 #define PPI_CHENSET_CH29_Enabled (1UL) /*!< Channel enabled. */
04053 #define PPI_CHENSET_CH29_Set (1UL) /*!< Enable channel on write. */
04054 
04055 /* Bit 28 : Enable PPI channel 28. */
04056 #define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */
04057 #define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */
04058 #define PPI_CHENSET_CH28_Disabled (0UL) /*!< Channel disabled. */
04059 #define PPI_CHENSET_CH28_Enabled (1UL) /*!< Channel enabled. */
04060 #define PPI_CHENSET_CH28_Set (1UL) /*!< Enable channel on write. */
04061 
04062 /* Bit 27 : Enable PPI channel 27. */
04063 #define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */
04064 #define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */
04065 #define PPI_CHENSET_CH27_Disabled (0UL) /*!< Channel disabled. */
04066 #define PPI_CHENSET_CH27_Enabled (1UL) /*!< Channel enabled. */
04067 #define PPI_CHENSET_CH27_Set (1UL) /*!< Enable channel on write. */
04068 
04069 /* Bit 26 : Enable PPI channel 26. */
04070 #define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */
04071 #define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */
04072 #define PPI_CHENSET_CH26_Disabled (0UL) /*!< Channel disabled. */
04073 #define PPI_CHENSET_CH26_Enabled (1UL) /*!< Channel enabled. */
04074 #define PPI_CHENSET_CH26_Set (1UL) /*!< Enable channel on write. */
04075 
04076 /* Bit 25 : Enable PPI channel 25. */
04077 #define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */
04078 #define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */
04079 #define PPI_CHENSET_CH25_Disabled (0UL) /*!< Channel disabled. */
04080 #define PPI_CHENSET_CH25_Enabled (1UL) /*!< Channel enabled. */
04081 #define PPI_CHENSET_CH25_Set (1UL) /*!< Enable channel on write. */
04082 
04083 /* Bit 24 : Enable PPI channel 24. */
04084 #define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */
04085 #define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */
04086 #define PPI_CHENSET_CH24_Disabled (0UL) /*!< Channel disabled. */
04087 #define PPI_CHENSET_CH24_Enabled (1UL) /*!< Channel enabled. */
04088 #define PPI_CHENSET_CH24_Set (1UL) /*!< Enable channel on write. */
04089 
04090 /* Bit 23 : Enable PPI channel 23. */
04091 #define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */
04092 #define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */
04093 #define PPI_CHENSET_CH23_Disabled (0UL) /*!< Channel disabled. */
04094 #define PPI_CHENSET_CH23_Enabled (1UL) /*!< Channel enabled. */
04095 #define PPI_CHENSET_CH23_Set (1UL) /*!< Enable channel on write. */
04096 
04097 /* Bit 22 : Enable PPI channel 22. */
04098 #define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */
04099 #define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */
04100 #define PPI_CHENSET_CH22_Disabled (0UL) /*!< Channel disabled. */
04101 #define PPI_CHENSET_CH22_Enabled (1UL) /*!< Channel enabled. */
04102 #define PPI_CHENSET_CH22_Set (1UL) /*!< Enable channel on write. */
04103 
04104 /* Bit 21 : Enable PPI channel 21. */
04105 #define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */
04106 #define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */
04107 #define PPI_CHENSET_CH21_Disabled (0UL) /*!< Channel disabled. */
04108 #define PPI_CHENSET_CH21_Enabled (1UL) /*!< Channel enabled. */
04109 #define PPI_CHENSET_CH21_Set (1UL) /*!< Enable channel on write. */
04110 
04111 /* Bit 20 : Enable PPI channel 20. */
04112 #define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */
04113 #define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */
04114 #define PPI_CHENSET_CH20_Disabled (0UL) /*!< Channel disabled. */
04115 #define PPI_CHENSET_CH20_Enabled (1UL) /*!< Channel enabled. */
04116 #define PPI_CHENSET_CH20_Set (1UL) /*!< Enable channel on write. */
04117 
04118 /* Bit 15 : Enable PPI channel 15. */
04119 #define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */
04120 #define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */
04121 #define PPI_CHENSET_CH15_Disabled (0UL) /*!< Channel disabled. */
04122 #define PPI_CHENSET_CH15_Enabled (1UL) /*!< Channel enabled. */
04123 #define PPI_CHENSET_CH15_Set (1UL) /*!< Enable channel on write. */
04124 
04125 /* Bit 14 : Enable PPI channel 14. */
04126 #define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */
04127 #define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */
04128 #define PPI_CHENSET_CH14_Disabled (0UL) /*!< Channel disabled. */
04129 #define PPI_CHENSET_CH14_Enabled (1UL) /*!< Channel enabled. */
04130 #define PPI_CHENSET_CH14_Set (1UL) /*!< Enable channel on write. */
04131 
04132 /* Bit 13 : Enable PPI channel 13. */
04133 #define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */
04134 #define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */
04135 #define PPI_CHENSET_CH13_Disabled (0UL) /*!< Channel disabled. */
04136 #define PPI_CHENSET_CH13_Enabled (1UL) /*!< Channel enabled. */
04137 #define PPI_CHENSET_CH13_Set (1UL) /*!< Enable channel on write. */
04138 
04139 /* Bit 12 : Enable PPI channel 12. */
04140 #define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */
04141 #define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */
04142 #define PPI_CHENSET_CH12_Disabled (0UL) /*!< Channel disabled. */
04143 #define PPI_CHENSET_CH12_Enabled (1UL) /*!< Channel enabled. */
04144 #define PPI_CHENSET_CH12_Set (1UL) /*!< Enable channel on write. */
04145 
04146 /* Bit 11 : Enable PPI channel 11. */
04147 #define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */
04148 #define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */
04149 #define PPI_CHENSET_CH11_Disabled (0UL) /*!< Channel disabled. */
04150 #define PPI_CHENSET_CH11_Enabled (1UL) /*!< Channel enabled. */
04151 #define PPI_CHENSET_CH11_Set (1UL) /*!< Enable channel on write. */
04152 
04153 /* Bit 10 : Enable PPI channel 10. */
04154 #define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */
04155 #define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */
04156 #define PPI_CHENSET_CH10_Disabled (0UL) /*!< Channel disabled. */
04157 #define PPI_CHENSET_CH10_Enabled (1UL) /*!< Channel enabled. */
04158 #define PPI_CHENSET_CH10_Set (1UL) /*!< Enable channel on write. */
04159 
04160 /* Bit 9 : Enable PPI channel 9. */
04161 #define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */
04162 #define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */
04163 #define PPI_CHENSET_CH9_Disabled (0UL) /*!< Channel disabled. */
04164 #define PPI_CHENSET_CH9_Enabled (1UL) /*!< Channel enabled. */
04165 #define PPI_CHENSET_CH9_Set (1UL) /*!< Enable channel on write. */
04166 
04167 /* Bit 8 : Enable PPI channel 8. */
04168 #define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */
04169 #define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */
04170 #define PPI_CHENSET_CH8_Disabled (0UL) /*!< Channel disabled. */
04171 #define PPI_CHENSET_CH8_Enabled (1UL) /*!< Channel enabled. */
04172 #define PPI_CHENSET_CH8_Set (1UL) /*!< Enable channel on write. */
04173 
04174 /* Bit 7 : Enable PPI channel 7. */
04175 #define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */
04176 #define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */
04177 #define PPI_CHENSET_CH7_Disabled (0UL) /*!< Channel disabled. */
04178 #define PPI_CHENSET_CH7_Enabled (1UL) /*!< Channel enabled. */
04179 #define PPI_CHENSET_CH7_Set (1UL) /*!< Enable channel on write. */
04180 
04181 /* Bit 6 : Enable PPI channel 6. */
04182 #define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */
04183 #define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */
04184 #define PPI_CHENSET_CH6_Disabled (0UL) /*!< Channel disabled. */
04185 #define PPI_CHENSET_CH6_Enabled (1UL) /*!< Channel enabled. */
04186 #define PPI_CHENSET_CH6_Set (1UL) /*!< Enable channel on write. */
04187 
04188 /* Bit 5 : Enable PPI channel 5. */
04189 #define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */
04190 #define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */
04191 #define PPI_CHENSET_CH5_Disabled (0UL) /*!< Channel disabled. */
04192 #define PPI_CHENSET_CH5_Enabled (1UL) /*!< Channel enabled. */
04193 #define PPI_CHENSET_CH5_Set (1UL) /*!< Enable channel on write. */
04194 
04195 /* Bit 4 : Enable PPI channel 4. */
04196 #define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */
04197 #define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */
04198 #define PPI_CHENSET_CH4_Disabled (0UL) /*!< Channel disabled. */
04199 #define PPI_CHENSET_CH4_Enabled (1UL) /*!< Channel enabled. */
04200 #define PPI_CHENSET_CH4_Set (1UL) /*!< Enable channel on write. */
04201 
04202 /* Bit 3 : Enable PPI channel 3. */
04203 #define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */
04204 #define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */
04205 #define PPI_CHENSET_CH3_Disabled (0UL) /*!< Channel disabled. */
04206 #define PPI_CHENSET_CH3_Enabled (1UL) /*!< Channel enabled. */
04207 #define PPI_CHENSET_CH3_Set (1UL) /*!< Enable channel on write. */
04208 
04209 /* Bit 2 : Enable PPI channel 2. */
04210 #define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */
04211 #define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */
04212 #define PPI_CHENSET_CH2_Disabled (0UL) /*!< Channel disabled. */
04213 #define PPI_CHENSET_CH2_Enabled (1UL) /*!< Channel enabled. */
04214 #define PPI_CHENSET_CH2_Set (1UL) /*!< Enable channel on write. */
04215 
04216 /* Bit 1 : Enable PPI channel 1. */
04217 #define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */
04218 #define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */
04219 #define PPI_CHENSET_CH1_Disabled (0UL) /*!< Channel disabled. */
04220 #define PPI_CHENSET_CH1_Enabled (1UL) /*!< Channel enabled. */
04221 #define PPI_CHENSET_CH1_Set (1UL) /*!< Enable channel on write. */
04222 
04223 /* Bit 0 : Enable PPI channel 0. */
04224 #define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */
04225 #define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */
04226 #define PPI_CHENSET_CH0_Disabled (0UL) /*!< Channel disabled. */
04227 #define PPI_CHENSET_CH0_Enabled (1UL) /*!< Channel enabled. */
04228 #define PPI_CHENSET_CH0_Set (1UL) /*!< Enable channel on write. */
04229 
04230 /* Register: PPI_CHENCLR */
04231 /* Description: Channel enable clear. */
04232 
04233 /* Bit 31 : Disable PPI channel 31. */
04234 #define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */
04235 #define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */
04236 #define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Channel disabled. */
04237 #define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Channel enabled. */
04238 #define PPI_CHENCLR_CH31_Clear (1UL) /*!< Disable channel on write. */
04239 
04240 /* Bit 30 : Disable PPI channel 30. */
04241 #define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */
04242 #define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */
04243 #define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Channel disabled. */
04244 #define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Channel enabled. */
04245 #define PPI_CHENCLR_CH30_Clear (1UL) /*!< Disable channel on write. */
04246 
04247 /* Bit 29 : Disable PPI channel 29. */
04248 #define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */
04249 #define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */
04250 #define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Channel disabled. */
04251 #define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Channel enabled. */
04252 #define PPI_CHENCLR_CH29_Clear (1UL) /*!< Disable channel on write. */
04253 
04254 /* Bit 28 : Disable PPI channel 28. */
04255 #define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */
04256 #define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */
04257 #define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Channel disabled. */
04258 #define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Channel enabled. */
04259 #define PPI_CHENCLR_CH28_Clear (1UL) /*!< Disable channel on write. */
04260 
04261 /* Bit 27 : Disable PPI channel 27. */
04262 #define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */
04263 #define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */
04264 #define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Channel disabled. */
04265 #define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Channel enabled. */
04266 #define PPI_CHENCLR_CH27_Clear (1UL) /*!< Disable channel on write. */
04267 
04268 /* Bit 26 : Disable PPI channel 26. */
04269 #define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */
04270 #define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */
04271 #define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Channel disabled. */
04272 #define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Channel enabled. */
04273 #define PPI_CHENCLR_CH26_Clear (1UL) /*!< Disable channel on write. */
04274 
04275 /* Bit 25 : Disable PPI channel 25. */
04276 #define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */
04277 #define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */
04278 #define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Channel disabled. */
04279 #define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Channel enabled. */
04280 #define PPI_CHENCLR_CH25_Clear (1UL) /*!< Disable channel on write. */
04281 
04282 /* Bit 24 : Disable PPI channel 24. */
04283 #define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */
04284 #define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */
04285 #define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Channel disabled. */
04286 #define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Channel enabled. */
04287 #define PPI_CHENCLR_CH24_Clear (1UL) /*!< Disable channel on write. */
04288 
04289 /* Bit 23 : Disable PPI channel 23. */
04290 #define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */
04291 #define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */
04292 #define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Channel disabled. */
04293 #define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Channel enabled. */
04294 #define PPI_CHENCLR_CH23_Clear (1UL) /*!< Disable channel on write. */
04295 
04296 /* Bit 22 : Disable PPI channel 22. */
04297 #define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */
04298 #define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */
04299 #define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Channel disabled. */
04300 #define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Channel enabled. */
04301 #define PPI_CHENCLR_CH22_Clear (1UL) /*!< Disable channel on write. */
04302 
04303 /* Bit 21 : Disable PPI channel 21. */
04304 #define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */
04305 #define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */
04306 #define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Channel disabled. */
04307 #define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Channel enabled. */
04308 #define PPI_CHENCLR_CH21_Clear (1UL) /*!< Disable channel on write. */
04309 
04310 /* Bit 20 : Disable PPI channel 20. */
04311 #define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */
04312 #define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */
04313 #define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Channel disabled. */
04314 #define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Channel enabled. */
04315 #define PPI_CHENCLR_CH20_Clear (1UL) /*!< Disable channel on write. */
04316 
04317 /* Bit 15 : Disable PPI channel 15. */
04318 #define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */
04319 #define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */
04320 #define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Channel disabled. */
04321 #define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Channel enabled. */
04322 #define PPI_CHENCLR_CH15_Clear (1UL) /*!< Disable channel on write. */
04323 
04324 /* Bit 14 : Disable PPI channel 14. */
04325 #define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */
04326 #define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */
04327 #define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Channel disabled. */
04328 #define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Channel enabled. */
04329 #define PPI_CHENCLR_CH14_Clear (1UL) /*!< Disable channel on write. */
04330 
04331 /* Bit 13 : Disable PPI channel 13. */
04332 #define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */
04333 #define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */
04334 #define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Channel disabled. */
04335 #define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Channel enabled. */
04336 #define PPI_CHENCLR_CH13_Clear (1UL) /*!< Disable channel on write. */
04337 
04338 /* Bit 12 : Disable PPI channel 12. */
04339 #define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */
04340 #define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */
04341 #define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Channel disabled. */
04342 #define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Channel enabled. */
04343 #define PPI_CHENCLR_CH12_Clear (1UL) /*!< Disable channel on write. */
04344 
04345 /* Bit 11 : Disable PPI channel 11. */
04346 #define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */
04347 #define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */
04348 #define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Channel disabled. */
04349 #define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Channel enabled. */
04350 #define PPI_CHENCLR_CH11_Clear (1UL) /*!< Disable channel on write. */
04351 
04352 /* Bit 10 : Disable PPI channel 10. */
04353 #define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */
04354 #define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */
04355 #define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Channel disabled. */
04356 #define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Channel enabled. */
04357 #define PPI_CHENCLR_CH10_Clear (1UL) /*!< Disable channel on write. */
04358 
04359 /* Bit 9 : Disable PPI channel 9. */
04360 #define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */
04361 #define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */
04362 #define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Channel disabled. */
04363 #define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Channel enabled. */
04364 #define PPI_CHENCLR_CH9_Clear (1UL) /*!< Disable channel on write. */
04365 
04366 /* Bit 8 : Disable PPI channel 8. */
04367 #define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */
04368 #define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */
04369 #define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Channel disabled. */
04370 #define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Channel enabled. */
04371 #define PPI_CHENCLR_CH8_Clear (1UL) /*!< Disable channel on write. */
04372 
04373 /* Bit 7 : Disable PPI channel 7. */
04374 #define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */
04375 #define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */
04376 #define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Channel disabled. */
04377 #define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Channel enabled. */
04378 #define PPI_CHENCLR_CH7_Clear (1UL) /*!< Disable channel on write. */
04379 
04380 /* Bit 6 : Disable PPI channel 6. */
04381 #define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */
04382 #define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */
04383 #define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Channel disabled. */
04384 #define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Channel enabled. */
04385 #define PPI_CHENCLR_CH6_Clear (1UL) /*!< Disable channel on write. */
04386 
04387 /* Bit 5 : Disable PPI channel 5. */
04388 #define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */
04389 #define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */
04390 #define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Channel disabled. */
04391 #define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Channel enabled. */
04392 #define PPI_CHENCLR_CH5_Clear (1UL) /*!< Disable channel on write. */
04393 
04394 /* Bit 4 : Disable PPI channel 4. */
04395 #define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */
04396 #define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */
04397 #define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Channel disabled. */
04398 #define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Channel enabled. */
04399 #define PPI_CHENCLR_CH4_Clear (1UL) /*!< Disable channel on write. */
04400 
04401 /* Bit 3 : Disable PPI channel 3. */
04402 #define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */
04403 #define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */
04404 #define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Channel disabled. */
04405 #define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Channel enabled. */
04406 #define PPI_CHENCLR_CH3_Clear (1UL) /*!< Disable channel on write. */
04407 
04408 /* Bit 2 : Disable PPI channel 2. */
04409 #define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */
04410 #define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */
04411 #define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Channel disabled. */
04412 #define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Channel enabled. */
04413 #define PPI_CHENCLR_CH2_Clear (1UL) /*!< Disable channel on write. */
04414 
04415 /* Bit 1 : Disable PPI channel 1. */
04416 #define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */
04417 #define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */
04418 #define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Channel disabled. */
04419 #define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Channel enabled. */
04420 #define PPI_CHENCLR_CH1_Clear (1UL) /*!< Disable channel on write. */
04421 
04422 /* Bit 0 : Disable PPI channel 0. */
04423 #define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */
04424 #define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */
04425 #define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Channel disabled. */
04426 #define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Channel enabled. */
04427 #define PPI_CHENCLR_CH0_Clear (1UL) /*!< Disable channel on write. */
04428 
04429 /* Register: PPI_CHG */
04430 /* Description: Channel group configuration. */
04431 
04432 /* Bit 31 : Include CH31 in channel group. */
04433 #define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */
04434 #define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */
04435 #define PPI_CHG_CH31_Excluded (0UL) /*!< Channel excluded. */
04436 #define PPI_CHG_CH31_Included (1UL) /*!< Channel included. */
04437 
04438 /* Bit 30 : Include CH30 in channel group. */
04439 #define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */
04440 #define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */
04441 #define PPI_CHG_CH30_Excluded (0UL) /*!< Channel excluded. */
04442 #define PPI_CHG_CH30_Included (1UL) /*!< Channel included. */
04443 
04444 /* Bit 29 : Include CH29 in channel group. */
04445 #define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */
04446 #define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */
04447 #define PPI_CHG_CH29_Excluded (0UL) /*!< Channel excluded. */
04448 #define PPI_CHG_CH29_Included (1UL) /*!< Channel included. */
04449 
04450 /* Bit 28 : Include CH28 in channel group. */
04451 #define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */
04452 #define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */
04453 #define PPI_CHG_CH28_Excluded (0UL) /*!< Channel excluded. */
04454 #define PPI_CHG_CH28_Included (1UL) /*!< Channel included. */
04455 
04456 /* Bit 27 : Include CH27 in channel group. */
04457 #define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */
04458 #define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */
04459 #define PPI_CHG_CH27_Excluded (0UL) /*!< Channel excluded. */
04460 #define PPI_CHG_CH27_Included (1UL) /*!< Channel included. */
04461 
04462 /* Bit 26 : Include CH26 in channel group. */
04463 #define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */
04464 #define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */
04465 #define PPI_CHG_CH26_Excluded (0UL) /*!< Channel excluded. */
04466 #define PPI_CHG_CH26_Included (1UL) /*!< Channel included. */
04467 
04468 /* Bit 25 : Include CH25 in channel group. */
04469 #define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */
04470 #define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */
04471 #define PPI_CHG_CH25_Excluded (0UL) /*!< Channel excluded. */
04472 #define PPI_CHG_CH25_Included (1UL) /*!< Channel included. */
04473 
04474 /* Bit 24 : Include CH24 in channel group. */
04475 #define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */
04476 #define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */
04477 #define PPI_CHG_CH24_Excluded (0UL) /*!< Channel excluded. */
04478 #define PPI_CHG_CH24_Included (1UL) /*!< Channel included. */
04479 
04480 /* Bit 23 : Include CH23 in channel group. */
04481 #define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */
04482 #define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */
04483 #define PPI_CHG_CH23_Excluded (0UL) /*!< Channel excluded. */
04484 #define PPI_CHG_CH23_Included (1UL) /*!< Channel included. */
04485 
04486 /* Bit 22 : Include CH22 in channel group. */
04487 #define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */
04488 #define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */
04489 #define PPI_CHG_CH22_Excluded (0UL) /*!< Channel excluded. */
04490 #define PPI_CHG_CH22_Included (1UL) /*!< Channel included. */
04491 
04492 /* Bit 21 : Include CH21 in channel group. */
04493 #define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */
04494 #define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */
04495 #define PPI_CHG_CH21_Excluded (0UL) /*!< Channel excluded. */
04496 #define PPI_CHG_CH21_Included (1UL) /*!< Channel included. */
04497 
04498 /* Bit 20 : Include CH20 in channel group. */
04499 #define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */
04500 #define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */
04501 #define PPI_CHG_CH20_Excluded (0UL) /*!< Channel excluded. */
04502 #define PPI_CHG_CH20_Included (1UL) /*!< Channel included. */
04503 
04504 /* Bit 15 : Include CH15 in channel group. */
04505 #define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */
04506 #define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */
04507 #define PPI_CHG_CH15_Excluded (0UL) /*!< Channel excluded. */
04508 #define PPI_CHG_CH15_Included (1UL) /*!< Channel included. */
04509 
04510 /* Bit 14 : Include CH14 in channel group. */
04511 #define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */
04512 #define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */
04513 #define PPI_CHG_CH14_Excluded (0UL) /*!< Channel excluded. */
04514 #define PPI_CHG_CH14_Included (1UL) /*!< Channel included. */
04515 
04516 /* Bit 13 : Include CH13 in channel group. */
04517 #define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */
04518 #define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */
04519 #define PPI_CHG_CH13_Excluded (0UL) /*!< Channel excluded. */
04520 #define PPI_CHG_CH13_Included (1UL) /*!< Channel included. */
04521 
04522 /* Bit 12 : Include CH12 in channel group. */
04523 #define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */
04524 #define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */
04525 #define PPI_CHG_CH12_Excluded (0UL) /*!< Channel excluded. */
04526 #define PPI_CHG_CH12_Included (1UL) /*!< Channel included. */
04527 
04528 /* Bit 11 : Include CH11 in channel group. */
04529 #define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */
04530 #define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */
04531 #define PPI_CHG_CH11_Excluded (0UL) /*!< Channel excluded. */
04532 #define PPI_CHG_CH11_Included (1UL) /*!< Channel included. */
04533 
04534 /* Bit 10 : Include CH10 in channel group. */
04535 #define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */
04536 #define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */
04537 #define PPI_CHG_CH10_Excluded (0UL) /*!< Channel excluded. */
04538 #define PPI_CHG_CH10_Included (1UL) /*!< Channel included. */
04539 
04540 /* Bit 9 : Include CH9 in channel group. */
04541 #define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */
04542 #define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */
04543 #define PPI_CHG_CH9_Excluded (0UL) /*!< Channel excluded. */
04544 #define PPI_CHG_CH9_Included (1UL) /*!< Channel included. */
04545 
04546 /* Bit 8 : Include CH8 in channel group. */
04547 #define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */
04548 #define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */
04549 #define PPI_CHG_CH8_Excluded (0UL) /*!< Channel excluded. */
04550 #define PPI_CHG_CH8_Included (1UL) /*!< Channel included. */
04551 
04552 /* Bit 7 : Include CH7 in channel group. */
04553 #define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */
04554 #define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */
04555 #define PPI_CHG_CH7_Excluded (0UL) /*!< Channel excluded. */
04556 #define PPI_CHG_CH7_Included (1UL) /*!< Channel included. */
04557 
04558 /* Bit 6 : Include CH6 in channel group. */
04559 #define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */
04560 #define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */
04561 #define PPI_CHG_CH6_Excluded (0UL) /*!< Channel excluded. */
04562 #define PPI_CHG_CH6_Included (1UL) /*!< Channel included. */
04563 
04564 /* Bit 5 : Include CH5 in channel group. */
04565 #define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */
04566 #define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */
04567 #define PPI_CHG_CH5_Excluded (0UL) /*!< Channel excluded. */
04568 #define PPI_CHG_CH5_Included (1UL) /*!< Channel included. */
04569 
04570 /* Bit 4 : Include CH4 in channel group. */
04571 #define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */
04572 #define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */
04573 #define PPI_CHG_CH4_Excluded (0UL) /*!< Channel excluded. */
04574 #define PPI_CHG_CH4_Included (1UL) /*!< Channel included. */
04575 
04576 /* Bit 3 : Include CH3 in channel group. */
04577 #define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */
04578 #define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */
04579 #define PPI_CHG_CH3_Excluded (0UL) /*!< Channel excluded. */
04580 #define PPI_CHG_CH3_Included (1UL) /*!< Channel included. */
04581 
04582 /* Bit 2 : Include CH2 in channel group. */
04583 #define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */
04584 #define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */
04585 #define PPI_CHG_CH2_Excluded (0UL) /*!< Channel excluded. */
04586 #define PPI_CHG_CH2_Included (1UL) /*!< Channel included. */
04587 
04588 /* Bit 1 : Include CH1 in channel group. */
04589 #define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */
04590 #define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */
04591 #define PPI_CHG_CH1_Excluded (0UL) /*!< Channel excluded. */
04592 #define PPI_CHG_CH1_Included (1UL) /*!< Channel included. */
04593 
04594 /* Bit 0 : Include CH0 in channel group. */
04595 #define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */
04596 #define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */
04597 #define PPI_CHG_CH0_Excluded (0UL) /*!< Channel excluded. */
04598 #define PPI_CHG_CH0_Included (1UL) /*!< Channel included. */
04599 
04600 
04601 /* Peripheral: QDEC */
04602 /* Description: Rotary decoder. */
04603 
04604 /* Register: QDEC_SHORTS */
04605 /* Description: Shortcuts for the QDEC. */
04606 
04607 /* Bit 1 : Shortcut between SAMPLERDY event and STOP task. */
04608 #define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */
04609 #define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */
04610 #define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */
04611 #define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */
04612 
04613 /* Bit 0 : Shortcut between REPORTRDY event and READCLRACC task. */
04614 #define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */
04615 #define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */
04616 #define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Shortcut disabled. */
04617 #define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Shortcut enabled. */
04618 
04619 /* Register: QDEC_INTENSET */
04620 /* Description: Interrupt enable set register. */
04621 
04622 /* Bit 2 : Enable interrupt on ACCOF event. */
04623 #define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */
04624 #define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */
04625 #define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */
04626 #define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */
04627 #define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable interrupt on write. */
04628 
04629 /* Bit 1 : Enable interrupt on REPORTRDY event. */
04630 #define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */
04631 #define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */
04632 #define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */
04633 #define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */
04634 #define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable interrupt on write. */
04635 
04636 /* Bit 0 : Enable interrupt on SAMPLERDY event. */
04637 #define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */
04638 #define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */
04639 #define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */
04640 #define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */
04641 #define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable interrupt on write. */
04642 
04643 /* Register: QDEC_INTENCLR */
04644 /* Description: Interrupt enable clear register. */
04645 
04646 /* Bit 2 : Disable interrupt on ACCOF event. */
04647 #define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */
04648 #define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */
04649 #define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */
04650 #define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */
04651 #define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable interrupt on write. */
04652 
04653 /* Bit 1 : Disable interrupt on REPORTRDY event. */
04654 #define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */
04655 #define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */
04656 #define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */
04657 #define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */
04658 #define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable interrupt on write. */
04659 
04660 /* Bit 0 : Disable interrupt on SAMPLERDY event. */
04661 #define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */
04662 #define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */
04663 #define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */
04664 #define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */
04665 #define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable interrupt on write. */
04666 
04667 /* Register: QDEC_ENABLE */
04668 /* Description: Enable the QDEC. */
04669 
04670 /* Bit 0 : Enable or disable QDEC. */
04671 #define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
04672 #define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
04673 #define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled QDEC. */
04674 #define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable QDEC. */
04675 
04676 /* Register: QDEC_LEDPOL */
04677 /* Description: LED output pin polarity. */
04678 
04679 /* Bit 0 : LED output pin polarity. */
04680 #define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */
04681 #define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */
04682 #define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< LED output is active low. */
04683 #define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */
04684 
04685 /* Register: QDEC_SAMPLEPER */
04686 /* Description: Sample period. */
04687 
04688 /* Bits 2..0 : Sample period. */
04689 #define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */
04690 #define QDEC_SAMPLEPER_SAMPLEPER_Msk (0x7UL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */
04691 #define QDEC_SAMPLEPER_SAMPLEPER_128us (0x00UL) /*!< 128us sample period. */
04692 #define QDEC_SAMPLEPER_SAMPLEPER_256us (0x01UL) /*!< 256us sample period. */
04693 #define QDEC_SAMPLEPER_SAMPLEPER_512us (0x02UL) /*!< 512us sample period. */
04694 #define QDEC_SAMPLEPER_SAMPLEPER_1024us (0x03UL) /*!< 1024us sample period. */
04695 #define QDEC_SAMPLEPER_SAMPLEPER_2048us (0x04UL) /*!< 2048us sample period. */
04696 #define QDEC_SAMPLEPER_SAMPLEPER_4096us (0x05UL) /*!< 4096us sample period. */
04697 #define QDEC_SAMPLEPER_SAMPLEPER_8192us (0x06UL) /*!< 8192us sample period. */
04698 #define QDEC_SAMPLEPER_SAMPLEPER_16384us (0x07UL) /*!< 16384us sample period. */
04699 
04700 /* Register: QDEC_SAMPLE */
04701 /* Description: Motion sample value. */
04702 
04703 /* Bits 31..0 : Last sample taken in compliment to 2. */
04704 #define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */
04705 #define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */
04706 
04707 /* Register: QDEC_REPORTPER */
04708 /* Description: Number of samples to generate an EVENT_REPORTRDY. */
04709 
04710 /* Bits 2..0 : Number of samples to generate an EVENT_REPORTRDY. */
04711 #define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */
04712 #define QDEC_REPORTPER_REPORTPER_Msk (0x7UL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */
04713 #define QDEC_REPORTPER_REPORTPER_10Smpl (0x00UL) /*!< 10 samples per report. */
04714 #define QDEC_REPORTPER_REPORTPER_40Smpl (0x01UL) /*!< 40 samples per report. */
04715 #define QDEC_REPORTPER_REPORTPER_80Smpl (0x02UL) /*!< 80 samples per report. */
04716 #define QDEC_REPORTPER_REPORTPER_120Smpl (0x03UL) /*!< 120 samples per report. */
04717 #define QDEC_REPORTPER_REPORTPER_160Smpl (0x04UL) /*!< 160 samples per report. */
04718 #define QDEC_REPORTPER_REPORTPER_200Smpl (0x05UL) /*!< 200 samples per report. */
04719 #define QDEC_REPORTPER_REPORTPER_240Smpl (0x06UL) /*!< 240 samples per report. */
04720 #define QDEC_REPORTPER_REPORTPER_280Smpl (0x07UL) /*!< 280 samples per report. */
04721 
04722 /* Register: QDEC_DBFEN */
04723 /* Description: Enable debouncer input filters. */
04724 
04725 /* Bit 0 : Enable debounce input filters. */
04726 #define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */
04727 #define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */
04728 #define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */
04729 #define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */
04730 
04731 /* Register: QDEC_LEDPRE */
04732 /* Description: Time LED is switched ON before the sample. */
04733 
04734 /* Bits 8..0 : Period in us the LED in switched on prior to sampling. */
04735 #define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */
04736 #define QDEC_LEDPRE_LEDPRE_Msk (0x1FFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */
04737 
04738 /* Register: QDEC_ACCDBL */
04739 /* Description: Accumulated double (error) transitions register. */
04740 
04741 /* Bits 3..0 : Accumulated double (error) transitions. */
04742 #define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */
04743 #define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */
04744 
04745 /* Register: QDEC_ACCDBLREAD */
04746 /* Description: Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */
04747 
04748 /* Bits 3..0 : Snapshot of accumulated double (error) transitions. */
04749 #define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */
04750 #define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */
04751 
04752 /* Register: QDEC_POWER */
04753 /* Description: Peripheral power control. */
04754 
04755 /* Bit 0 : Peripheral power control. */
04756 #define QDEC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
04757 #define QDEC_POWER_POWER_Msk (0x1UL << QDEC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
04758 #define QDEC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
04759 #define QDEC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
04760 
04761 
04762 /* Peripheral: RADIO */
04763 /* Description: The radio. */
04764 
04765 /* Register: RADIO_SHORTS */
04766 /* Description: Shortcuts for the radio. */
04767 
04768 /* Bit 8 : Shortcut between DISABLED event and RSSISTOP task. */
04769 #define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */
04770 #define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */
04771 #define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Shortcut disabled. */
04772 #define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Shortcut enabled. */
04773 
04774 /* Bit 6 : Shortcut between ADDRESS event and BCSTART task. */
04775 #define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */
04776 #define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */
04777 #define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Shortcut disabled. */
04778 #define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Shortcut enabled. */
04779 
04780 /* Bit 5 : Shortcut between END event and START task. */
04781 #define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */
04782 #define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */
04783 #define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */
04784 #define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */
04785 
04786 /* Bit 4 : Shortcut between ADDRESS event and RSSISTART task. */
04787 #define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */
04788 #define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */
04789 #define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Shortcut disabled. */
04790 #define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Shortcut enabled. */
04791 
04792 /* Bit 3 : Shortcut between DISABLED event and RXEN task. */
04793 #define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */
04794 #define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */
04795 #define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Shortcut disabled. */
04796 #define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Shortcut enabled. */
04797 
04798 /* Bit 2 : Shortcut between DISABLED event and TXEN task.  */
04799 #define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */
04800 #define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */
04801 #define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Shortcut disabled. */
04802 #define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Shortcut enabled. */
04803 
04804 /* Bit 1 : Shortcut between END event and DISABLE task. */
04805 #define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */
04806 #define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */
04807 #define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Shortcut disabled. */
04808 #define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Shortcut enabled. */
04809 
04810 /* Bit 0 : Shortcut between READY event and START task. */
04811 #define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */
04812 #define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */
04813 #define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Shortcut disabled. */
04814 #define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Shortcut enabled. */
04815 
04816 /* Register: RADIO_INTENSET */
04817 /* Description: Interrupt enable set register. */
04818 
04819 /* Bit 10 : Enable interrupt on BCMATCH event. */
04820 #define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */
04821 #define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */
04822 #define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */
04823 #define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */
04824 #define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable interrupt on write. */
04825 
04826 /* Bit 7 : Enable interrupt on RSSIEND event. */
04827 #define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */
04828 #define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */
04829 #define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */
04830 #define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */
04831 #define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable interrupt on write. */
04832 
04833 /* Bit 6 : Enable interrupt on DEVMISS event. */
04834 #define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */
04835 #define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */
04836 #define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */
04837 #define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */
04838 #define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable interrupt on write. */
04839 
04840 /* Bit 5 : Enable interrupt on DEVMATCH event. */
04841 #define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */
04842 #define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */
04843 #define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */
04844 #define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */
04845 #define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable interrupt on write. */
04846 
04847 /* Bit 4 : Enable interrupt on DISABLED event. */
04848 #define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */
04849 #define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */
04850 #define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */
04851 #define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */
04852 #define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable interrupt on write. */
04853 
04854 /* Bit 3 : Enable interrupt on END event. */
04855 #define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */
04856 #define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */
04857 #define RADIO_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
04858 #define RADIO_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
04859 #define RADIO_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
04860 
04861 /* Bit 2 : Enable interrupt on PAYLOAD event. */
04862 #define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */
04863 #define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */
04864 #define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */
04865 #define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */
04866 #define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable interrupt on write. */
04867 
04868 /* Bit 1 : Enable interrupt on ADDRESS event. */
04869 #define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */
04870 #define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
04871 #define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */
04872 #define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */
04873 #define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable interrupt on write. */
04874 
04875 /* Bit 0 : Enable interrupt on READY event. */
04876 #define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */
04877 #define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
04878 #define RADIO_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */
04879 #define RADIO_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */
04880 #define RADIO_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */
04881 
04882 /* Register: RADIO_INTENCLR */
04883 /* Description: Interrupt enable clear register. */
04884 
04885 /* Bit 10 : Disable interrupt on BCMATCH event. */
04886 #define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */
04887 #define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */
04888 #define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */
04889 #define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */
04890 #define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable interrupt on write. */
04891 
04892 /* Bit 7 : Disable interrupt on RSSIEND event. */
04893 #define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */
04894 #define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */
04895 #define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */
04896 #define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */
04897 #define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable interrupt on write. */
04898 
04899 /* Bit 6 : Disable interrupt on DEVMISS event. */
04900 #define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */
04901 #define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */
04902 #define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */
04903 #define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */
04904 #define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable interrupt on write. */
04905 
04906 /* Bit 5 : Disable interrupt on DEVMATCH event. */
04907 #define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */
04908 #define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */
04909 #define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */
04910 #define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */
04911 #define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable interrupt on write. */
04912 
04913 /* Bit 4 : Disable interrupt on DISABLED event. */
04914 #define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */
04915 #define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */
04916 #define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */
04917 #define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */
04918 #define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable interrupt on write. */
04919 
04920 /* Bit 3 : Disable interrupt on END event. */
04921 #define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */
04922 #define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */
04923 #define RADIO_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
04924 #define RADIO_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
04925 #define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
04926 
04927 /* Bit 2 : Disable interrupt on PAYLOAD event. */
04928 #define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */
04929 #define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */
04930 #define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */
04931 #define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */
04932 #define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable interrupt on write. */
04933 
04934 /* Bit 1 : Disable interrupt on ADDRESS event. */
04935 #define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */
04936 #define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
04937 #define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */
04938 #define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */
04939 #define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable interrupt on write. */
04940 
04941 /* Bit 0 : Disable interrupt on READY event. */
04942 #define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */
04943 #define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
04944 #define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */
04945 #define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */
04946 #define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */
04947 
04948 /* Register: RADIO_CRCSTATUS */
04949 /* Description: CRC status of received packet. */
04950 
04951 /* Bit 0 : CRC status of received packet. */
04952 #define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */
04953 #define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */
04954 #define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error. */
04955 #define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok. */
04956 
04957 /* Register: RADIO_RXMATCH */
04958 /* Description: Received address. */
04959 
04960 /* Bits 2..0 : Logical address in which previous packet was received. */
04961 #define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */
04962 #define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */
04963 
04964 /* Register: RADIO_RXCRC */
04965 /* Description: Received CRC. */
04966 
04967 /* Bits 23..0 : CRC field of previously received packet. */
04968 #define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */
04969 #define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */
04970 
04971 /* Register: RADIO_DAI */
04972 /* Description: Device address match index. */
04973 
04974 /* Bits 2..0 : Index (n) of device address (see DAB[n] and DAP[n]) that obtained an address match. */
04975 #define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */
04976 #define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */
04977 
04978 /* Register: RADIO_FREQUENCY */
04979 /* Description: Frequency. */
04980 
04981 /* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decision point: TXEN or RXEN task.  */
04982 #define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
04983 #define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
04984 
04985 /* Register: RADIO_TXPOWER */
04986 /* Description: Output power. */
04987 
04988 /* Bits 7..0 : Radio output power. Decision point: TXEN task. */
04989 #define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */
04990 #define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */
04991 #define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0dBm. */
04992 #define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4dBm. */
04993 #define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */
04994 #define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */
04995 #define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */
04996 #define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */
04997 #define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */
04998 #define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */
04999 
05000 /* Register: RADIO_MODE */
05001 /* Description: Data rate and modulation. */
05002 
05003 /* Bits 1..0 : Radio data rate and modulation setting. Decision point: TXEN or RXEN task. */
05004 #define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
05005 #define RADIO_MODE_MODE_Msk (0x3UL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
05006 #define RADIO_MODE_MODE_Nrf_1Mbit (0x00UL) /*!< 1Mbit/s Nordic propietary radio mode. */
05007 #define RADIO_MODE_MODE_Nrf_2Mbit (0x01UL) /*!< 2Mbit/s Nordic propietary radio mode. */
05008 #define RADIO_MODE_MODE_Nrf_250Kbit (0x02UL) /*!< 250kbit/s Nordic propietary radio mode. */
05009 #define RADIO_MODE_MODE_Ble_1Mbit (0x03UL) /*!< 1Mbit/s Bluetooth Low Energy */
05010 
05011 /* Register: RADIO_PCNF0 */
05012 /* Description: Packet configuration 0. */
05013 
05014 /* Bits 19..16 : Length of S1 field in number of bits. Decision point: START task. */
05015 #define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */
05016 #define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */
05017 
05018 /* Bit 8 : Length of S0 field in number of bytes. Decision point: START task. */
05019 #define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */
05020 #define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */
05021 
05022 /* Bits 3..0 : Length of length field in number of bits. Decision point: START task. */
05023 #define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */
05024 #define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */
05025 
05026 /* Register: RADIO_PCNF1 */
05027 /* Description: Packet configuration 1. */
05028 
05029 /* Bit 25 : Packet whitening enable. */
05030 #define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */
05031 #define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */
05032 #define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Whitening disabled. */
05033 #define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Whitening enabled. */
05034 
05035 /* Bit 24 : On air endianness of packet length field. Decision point: START task. */
05036 #define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */
05037 #define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */
05038 #define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least significant bit on air first */
05039 #define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */
05040 
05041 /* Bits 18..16 : Base address length in number of bytes. Decision point: START task. */
05042 #define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */
05043 #define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */
05044 
05045 /* Bits 15..8 : Static length in number of bytes. Decision point: START task. */
05046 #define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */
05047 #define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */
05048 
05049 /* Bits 7..0 : Maximum length of packet payload in number of bytes. */
05050 #define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */
05051 #define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */
05052 
05053 /* Register: RADIO_PREFIX0 */
05054 /* Description: Prefixes bytes for logical addresses 0 to 3. */
05055 
05056 /* Bits 31..24 : Address prefix 3. Decision point: START task. */
05057 #define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */
05058 #define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */
05059 
05060 /* Bits 23..16 : Address prefix 2. Decision point: START task. */
05061 #define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */
05062 #define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */
05063 
05064 /* Bits 15..8 : Address prefix 1. Decision point: START task. */
05065 #define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */
05066 #define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */
05067 
05068 /* Bits 7..0 : Address prefix 0. Decision point: START task. */
05069 #define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */
05070 #define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */
05071 
05072 /* Register: RADIO_PREFIX1 */
05073 /* Description: Prefixes bytes for logical addresses 4 to 7. */
05074 
05075 /* Bits 31..24 : Address prefix 7. Decision point: START task. */
05076 #define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */
05077 #define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */
05078 
05079 /* Bits 23..16 : Address prefix 6. Decision point: START task. */
05080 #define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */
05081 #define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */
05082 
05083 /* Bits 15..8 : Address prefix 5. Decision point: START task. */
05084 #define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */
05085 #define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */
05086 
05087 /* Bits 7..0 : Address prefix 4. Decision point: START task. */
05088 #define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */
05089 #define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */
05090 
05091 /* Register: RADIO_TXADDRESS */
05092 /* Description: Transmit address select. */
05093 
05094 /* Bits 2..0 : Logical address to be used when transmitting a packet. Decision point: START task. */
05095 #define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */
05096 #define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */
05097 
05098 /* Register: RADIO_RXADDRESSES */
05099 /* Description: Receive address select. */
05100 
05101 /* Bit 7 : Enable reception on logical address 7. Decision point: START task. */
05102 #define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */
05103 #define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */
05104 #define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Reception disabled. */
05105 #define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Reception enabled. */
05106 
05107 /* Bit 6 : Enable reception on logical address 6. Decision point: START task. */
05108 #define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */
05109 #define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */
05110 #define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Reception disabled. */
05111 #define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Reception enabled. */
05112 
05113 /* Bit 5 : Enable reception on logical address 5. Decision point: START task. */
05114 #define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */
05115 #define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */
05116 #define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Reception disabled. */
05117 #define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Reception enabled. */
05118 
05119 /* Bit 4 : Enable reception on logical address 4. Decision point: START task. */
05120 #define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */
05121 #define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */
05122 #define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Reception disabled. */
05123 #define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Reception enabled. */
05124 
05125 /* Bit 3 : Enable reception on logical address 3. Decision point: START task. */
05126 #define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */
05127 #define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */
05128 #define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Reception disabled. */
05129 #define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Reception enabled. */
05130 
05131 /* Bit 2 : Enable reception on logical address 2. Decision point: START task. */
05132 #define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */
05133 #define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */
05134 #define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Reception disabled. */
05135 #define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Reception enabled. */
05136 
05137 /* Bit 1 : Enable reception on logical address 1. Decision point: START task. */
05138 #define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */
05139 #define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */
05140 #define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Reception disabled. */
05141 #define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Reception enabled. */
05142 
05143 /* Bit 0 : Enable reception on logical address 0. Decision point: START task. */
05144 #define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */
05145 #define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */
05146 #define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Reception disabled. */
05147 #define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Reception enabled. */
05148 
05149 /* Register: RADIO_CRCCNF */
05150 /* Description: CRC configuration. */
05151 
05152 /* Bit 8 : Leave packet address field out of the CRC calculation. Decision point: START task. */
05153 #define RADIO_CRCCNF_SKIPADDR_Pos (8UL) /*!< Position of SKIPADDR field. */
05154 #define RADIO_CRCCNF_SKIPADDR_Msk (0x1UL << RADIO_CRCCNF_SKIPADDR_Pos) /*!< Bit mask of SKIPADDR field. */
05155 #define RADIO_CRCCNF_SKIPADDR_Include (0UL) /*!< Include packet address in CRC calculation. */
05156 #define RADIO_CRCCNF_SKIPADDR_Skip (1UL) /*!< Packet address is skipped in CRC calculation. The CRC calculation will start at the first byte after the address. */
05157 
05158 /* Bits 1..0 : CRC length. Decision point: START task. */
05159 #define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */
05160 #define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */
05161 #define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC calculation disabled. */
05162 #define RADIO_CRCCNF_LEN_One (1UL) /*!< One byte long CRC. */
05163 #define RADIO_CRCCNF_LEN_Two (2UL) /*!< Two bytes long CRC. */
05164 #define RADIO_CRCCNF_LEN_Three (3UL) /*!< Three bytes long CRC. */
05165 
05166 /* Register: RADIO_CRCPOLY */
05167 /* Description: CRC polynomial. */
05168 
05169 /* Bits 23..0 : CRC polynomial. Decision point: START task. */
05170 #define RADIO_CRCPOLY_CRCPOLY_Pos (0UL) /*!< Position of CRCPOLY field. */
05171 #define RADIO_CRCPOLY_CRCPOLY_Msk (0xFFFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */
05172 
05173 /* Register: RADIO_CRCINIT */
05174 /* Description: CRC initial value. */
05175 
05176 /* Bits 23..0 : Initial value for CRC calculation. Decision point: START task. */
05177 #define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */
05178 #define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */
05179 
05180 /* Register: RADIO_TEST */
05181 /* Description: Test features enable register. */
05182 
05183 /* Bit 1 : PLL lock. Decision point: TXEN or RXEN task. */
05184 #define RADIO_TEST_PLLLOCK_Pos (1UL) /*!< Position of PLLLOCK field. */
05185 #define RADIO_TEST_PLLLOCK_Msk (0x1UL << RADIO_TEST_PLLLOCK_Pos) /*!< Bit mask of PLLLOCK field. */
05186 #define RADIO_TEST_PLLLOCK_Disabled (0UL) /*!< PLL lock disabled. */
05187 #define RADIO_TEST_PLLLOCK_Enabled (1UL) /*!< PLL lock enabled. */
05188 
05189 /* Bit 0 : Constant carrier. Decision point: TXEN task. */
05190 #define RADIO_TEST_CONSTCARRIER_Pos (0UL) /*!< Position of CONSTCARRIER field. */
05191 #define RADIO_TEST_CONSTCARRIER_Msk (0x1UL << RADIO_TEST_CONSTCARRIER_Pos) /*!< Bit mask of CONSTCARRIER field. */
05192 #define RADIO_TEST_CONSTCARRIER_Disabled (0UL) /*!< Constant carrier disabled. */
05193 #define RADIO_TEST_CONSTCARRIER_Enabled (1UL) /*!< Constant carrier enabled. */
05194 
05195 /* Register: RADIO_TIFS */
05196 /* Description: Inter Frame Spacing in microseconds. */
05197 
05198 /* Bits 7..0 : Inter frame spacing in microseconds. Decision point: START rask */
05199 #define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */
05200 #define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */
05201 
05202 /* Register: RADIO_RSSISAMPLE */
05203 /* Description: RSSI sample. */
05204 
05205 /* Bits 6..0 : RSSI sample result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */
05206 #define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */
05207 #define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */
05208 
05209 /* Register: RADIO_STATE */
05210 /* Description: Current radio state. */
05211 
05212 /* Bits 3..0 : Current radio state. */
05213 #define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */
05214 #define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */
05215 #define RADIO_STATE_STATE_Disabled (0x00UL) /*!< Radio is in the Disabled state. */
05216 #define RADIO_STATE_STATE_RxRu (0x01UL) /*!< Radio is in the Rx Ramp Up state. */
05217 #define RADIO_STATE_STATE_RxIdle (0x02UL) /*!< Radio is in the Rx Idle state. */
05218 #define RADIO_STATE_STATE_Rx (0x03UL) /*!< Radio is in the Rx state. */
05219 #define RADIO_STATE_STATE_RxDisable (0x04UL) /*!< Radio is in the Rx Disable state. */
05220 #define RADIO_STATE_STATE_TxRu (0x09UL) /*!< Radio is in the Tx Ramp Up state. */
05221 #define RADIO_STATE_STATE_TxIdle (0x0AUL) /*!< Radio is in the Tx Idle state. */
05222 #define RADIO_STATE_STATE_Tx (0x0BUL) /*!< Radio is in the Tx state. */
05223 #define RADIO_STATE_STATE_TxDisable (0x0CUL) /*!< Radio is in the Tx Disable state. */
05224 
05225 /* Register: RADIO_DATAWHITEIV */
05226 /* Description: Data whitening initial value. */
05227 
05228 /* Bits 6..0 : Data whitening initial value. Bit 0 corresponds to Position 0 of the LSFR, Bit 1 to position 5... Decision point: TXEN or RXEN task. */
05229 #define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */
05230 #define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x7FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */
05231 
05232 /* Register: RADIO_DAP */
05233 /* Description: Device address prefix. */
05234 
05235 /* Bits 15..0 : Device address prefix. */
05236 #define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */
05237 #define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */
05238 
05239 /* Register: RADIO_DACNF */
05240 /* Description: Device address match configuration. */
05241 
05242 /* Bit 15 : TxAdd for device address 7. */
05243 #define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */
05244 #define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */
05245 
05246 /* Bit 14 : TxAdd for device address 6. */
05247 #define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */
05248 #define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */
05249 
05250 /* Bit 13 : TxAdd for device address 5. */
05251 #define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */
05252 #define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */
05253 
05254 /* Bit 12 : TxAdd for device address 4. */
05255 #define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */
05256 #define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */
05257 
05258 /* Bit 11 : TxAdd for device address 3. */
05259 #define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */
05260 #define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */
05261 
05262 /* Bit 10 : TxAdd for device address 2. */
05263 #define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */
05264 #define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */
05265 
05266 /* Bit 9 : TxAdd for device address 1. */
05267 #define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */
05268 #define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */
05269 
05270 /* Bit 8 : TxAdd for device address 0. */
05271 #define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */
05272 #define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */
05273 
05274 /* Bit 7 : Enable or disable device address matching using device address 7. */
05275 #define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */
05276 #define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */
05277 #define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled. */
05278 #define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled. */
05279 
05280 /* Bit 6 : Enable or disable device address matching using device address 6. */
05281 #define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */
05282 #define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */
05283 #define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled. */
05284 #define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled. */
05285 
05286 /* Bit 5 : Enable or disable device address matching using device address 5. */
05287 #define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */
05288 #define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */
05289 #define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled. */
05290 #define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled. */
05291 
05292 /* Bit 4 : Enable or disable device address matching using device address 4. */
05293 #define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */
05294 #define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */
05295 #define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled. */
05296 #define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled. */
05297 
05298 /* Bit 3 : Enable or disable device address matching using device address 3. */
05299 #define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */
05300 #define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */
05301 #define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled. */
05302 #define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled. */
05303 
05304 /* Bit 2 : Enable or disable device address matching using device address 2. */
05305 #define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */
05306 #define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */
05307 #define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled. */
05308 #define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled. */
05309 
05310 /* Bit 1 : Enable or disable device address matching using device address 1. */
05311 #define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */
05312 #define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */
05313 #define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled. */
05314 #define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled. */
05315 
05316 /* Bit 0 : Enable or disable device address matching using device address 0. */
05317 #define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */
05318 #define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */
05319 #define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled. */
05320 #define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled. */
05321 
05322 /* Register: RADIO_OVERRIDE0 */
05323 /* Description: Trim value override register 0. */
05324 
05325 /* Bits 31..0 : Trim value override 0. */
05326 #define RADIO_OVERRIDE0_OVERRIDE0_Pos (0UL) /*!< Position of OVERRIDE0 field. */
05327 #define RADIO_OVERRIDE0_OVERRIDE0_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE0_OVERRIDE0_Pos) /*!< Bit mask of OVERRIDE0 field. */
05328 
05329 /* Register: RADIO_OVERRIDE1 */
05330 /* Description: Trim value override register 1. */
05331 
05332 /* Bits 31..0 : Trim value override 1. */
05333 #define RADIO_OVERRIDE1_OVERRIDE1_Pos (0UL) /*!< Position of OVERRIDE1 field. */
05334 #define RADIO_OVERRIDE1_OVERRIDE1_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE1_OVERRIDE1_Pos) /*!< Bit mask of OVERRIDE1 field. */
05335 
05336 /* Register: RADIO_OVERRIDE2 */
05337 /* Description: Trim value override register 2. */
05338 
05339 /* Bits 31..0 : Trim value override 2. */
05340 #define RADIO_OVERRIDE2_OVERRIDE2_Pos (0UL) /*!< Position of OVERRIDE2 field. */
05341 #define RADIO_OVERRIDE2_OVERRIDE2_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE2_OVERRIDE2_Pos) /*!< Bit mask of OVERRIDE2 field. */
05342 
05343 /* Register: RADIO_OVERRIDE3 */
05344 /* Description: Trim value override register 3. */
05345 
05346 /* Bits 31..0 : Trim value override 3. */
05347 #define RADIO_OVERRIDE3_OVERRIDE3_Pos (0UL) /*!< Position of OVERRIDE3 field. */
05348 #define RADIO_OVERRIDE3_OVERRIDE3_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE3_OVERRIDE3_Pos) /*!< Bit mask of OVERRIDE3 field. */
05349 
05350 /* Register: RADIO_OVERRIDE4 */
05351 /* Description: Trim value override register 4. */
05352 
05353 /* Bit 31 : Enable or disable override of default trim values. */
05354 #define RADIO_OVERRIDE4_ENABLE_Pos (31UL) /*!< Position of ENABLE field. */
05355 #define RADIO_OVERRIDE4_ENABLE_Msk (0x1UL << RADIO_OVERRIDE4_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
05356 #define RADIO_OVERRIDE4_ENABLE_Disabled (0UL) /*!< Override trim values disabled. */
05357 #define RADIO_OVERRIDE4_ENABLE_Enabled (1UL) /*!< Override trim values enabled. */
05358 
05359 /* Bits 27..0 : Trim value override 4. */
05360 #define RADIO_OVERRIDE4_OVERRIDE4_Pos (0UL) /*!< Position of OVERRIDE4 field. */
05361 #define RADIO_OVERRIDE4_OVERRIDE4_Msk (0xFFFFFFFUL << RADIO_OVERRIDE4_OVERRIDE4_Pos) /*!< Bit mask of OVERRIDE4 field. */
05362 
05363 /* Register: RADIO_POWER */
05364 /* Description: Peripheral power control. */
05365 
05366 /* Bit 0 : Peripheral power control. */
05367 #define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
05368 #define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
05369 #define RADIO_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
05370 #define RADIO_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
05371 
05372 
05373 /* Peripheral: RNG */
05374 /* Description: Random Number Generator. */
05375 
05376 /* Register: RNG_SHORTS */
05377 /* Description: Shortcuts for the RNG. */
05378 
05379 /* Bit 0 : Shortcut between VALRDY event and STOP task. */
05380 #define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */
05381 #define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */
05382 #define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */
05383 #define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */
05384 
05385 /* Register: RNG_INTENSET */
05386 /* Description: Interrupt enable set register */
05387 
05388 /* Bit 0 : Enable interrupt on VALRDY event. */
05389 #define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */
05390 #define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */
05391 #define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */
05392 #define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */
05393 #define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable interrupt on write. */
05394 
05395 /* Register: RNG_INTENCLR */
05396 /* Description: Interrupt enable clear register */
05397 
05398 /* Bit 0 : Disable interrupt on VALRDY event. */
05399 #define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */
05400 #define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */
05401 #define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */
05402 #define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */
05403 #define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable interrupt on write. */
05404 
05405 /* Register: RNG_CONFIG */
05406 /* Description: Configuration register. */
05407 
05408 /* Bit 0 : Digital error correction enable. */
05409 #define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */
05410 #define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */
05411 #define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Digital error correction disabled. */
05412 #define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Digital error correction enabled. */
05413 
05414 /* Register: RNG_VALUE */
05415 /* Description: RNG random number. */
05416 
05417 /* Bits 7..0 : Generated random number. */
05418 #define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */
05419 #define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */
05420 
05421 /* Register: RNG_POWER */
05422 /* Description: Peripheral power control. */
05423 
05424 /* Bit 0 : Peripheral power control. */
05425 #define RNG_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
05426 #define RNG_POWER_POWER_Msk (0x1UL << RNG_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
05427 #define RNG_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
05428 #define RNG_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
05429 
05430 
05431 /* Peripheral: RTC */
05432 /* Description: Real time counter 0. */
05433 
05434 /* Register: RTC_INTENSET */
05435 /* Description: Interrupt enable set register. */
05436 
05437 /* Bit 19 : Enable interrupt on COMPARE[3] event. */
05438 #define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
05439 #define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
05440 #define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */
05441 #define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */
05442 #define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */
05443 
05444 /* Bit 18 : Enable interrupt on COMPARE[2] event. */
05445 #define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
05446 #define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
05447 #define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */
05448 #define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */
05449 #define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */
05450 
05451 /* Bit 17 : Enable interrupt on COMPARE[1] event. */
05452 #define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
05453 #define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
05454 #define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */
05455 #define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */
05456 #define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */
05457 
05458 /* Bit 16 : Enable interrupt on COMPARE[0] event. */
05459 #define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
05460 #define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
05461 #define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */
05462 #define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */
05463 #define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */
05464 
05465 /* Bit 1 : Enable interrupt on OVRFLW event. */
05466 #define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
05467 #define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
05468 #define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */
05469 #define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */
05470 #define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable interrupt on write. */
05471 
05472 /* Bit 0 : Enable interrupt on TICK event. */
05473 #define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */
05474 #define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */
05475 #define RTC_INTENSET_TICK_Disabled (0UL) /*!< Interrupt disabled. */
05476 #define RTC_INTENSET_TICK_Enabled (1UL) /*!< Interrupt enabled. */
05477 #define RTC_INTENSET_TICK_Set (1UL) /*!< Enable interrupt on write. */
05478 
05479 /* Register: RTC_INTENCLR */
05480 /* Description: Interrupt enable clear register. */
05481 
05482 /* Bit 19 : Disable interrupt on COMPARE[3] event. */
05483 #define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
05484 #define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
05485 #define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */
05486 #define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */
05487 #define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */
05488 
05489 /* Bit 18 : Disable interrupt on COMPARE[2] event. */
05490 #define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
05491 #define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
05492 #define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */
05493 #define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */
05494 #define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */
05495 
05496 /* Bit 17 : Disable interrupt on COMPARE[1] event. */
05497 #define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
05498 #define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
05499 #define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */
05500 #define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */
05501 #define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */
05502 
05503 /* Bit 16 : Disable interrupt on COMPARE[0] event. */
05504 #define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
05505 #define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
05506 #define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */
05507 #define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */
05508 #define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */
05509 
05510 /* Bit 1 : Disable interrupt on OVRFLW event. */
05511 #define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
05512 #define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
05513 #define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */
05514 #define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */
05515 #define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable interrupt on write. */
05516 
05517 /* Bit 0 : Disable interrupt on TICK event. */
05518 #define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */
05519 #define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */
05520 #define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Interrupt disabled. */
05521 #define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Interrupt enabled. */
05522 #define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable interrupt on write. */
05523 
05524 /* Register: RTC_EVTEN */
05525 /* Description: Configures event enable routing to PPI for each RTC event. */
05526 
05527 /* Bit 19 : COMPARE[3] event enable. */
05528 #define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
05529 #define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
05530 #define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Event disabled. */
05531 #define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Event enabled. */
05532 
05533 /* Bit 18 : COMPARE[2] event enable. */
05534 #define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
05535 #define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
05536 #define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Event disabled. */
05537 #define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Event enabled. */
05538 
05539 /* Bit 17 : COMPARE[1] event enable. */
05540 #define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
05541 #define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
05542 #define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Event disabled. */
05543 #define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Event enabled. */
05544 
05545 /* Bit 16 : COMPARE[0] event enable. */
05546 #define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
05547 #define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
05548 #define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Event disabled. */
05549 #define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Event enabled. */
05550 
05551 /* Bit 1 : OVRFLW event enable. */
05552 #define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
05553 #define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
05554 #define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Event disabled. */
05555 #define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Event enabled. */
05556 
05557 /* Bit 0 : TICK event enable. */
05558 #define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */
05559 #define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */
05560 #define RTC_EVTEN_TICK_Disabled (0UL) /*!< Event disabled. */
05561 #define RTC_EVTEN_TICK_Enabled (1UL) /*!< Event enabled. */
05562 
05563 /* Register: RTC_EVTENSET */
05564 /* Description: Enable events routing to PPI. The reading of this register gives the value of EVTEN. */
05565 
05566 /* Bit 19 : Enable routing to PPI of COMPARE[3] event. */
05567 #define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
05568 #define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
05569 #define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Event disabled. */
05570 #define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Event enabled. */
05571 #define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable event on write. */
05572 
05573 /* Bit 18 : Enable routing to PPI of COMPARE[2] event. */
05574 #define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
05575 #define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
05576 #define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Event disabled. */
05577 #define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Event enabled. */
05578 #define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable event on write. */
05579 
05580 /* Bit 17 : Enable routing to PPI of COMPARE[1] event. */
05581 #define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
05582 #define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
05583 #define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Event disabled. */
05584 #define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Event enabled. */
05585 #define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable event on write. */
05586 
05587 /* Bit 16 : Enable routing to PPI of COMPARE[0] event. */
05588 #define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
05589 #define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
05590 #define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Event disabled. */
05591 #define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Event enabled. */
05592 #define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable event on write. */
05593 
05594 /* Bit 1 : Enable routing to PPI of OVRFLW event. */
05595 #define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
05596 #define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
05597 #define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Event disabled. */
05598 #define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Event enabled. */
05599 #define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable event on write. */
05600 
05601 /* Bit 0 : Enable routing to PPI of TICK event. */
05602 #define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */
05603 #define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */
05604 #define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Event disabled. */
05605 #define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Event enabled. */
05606 #define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable event on write. */
05607 
05608 /* Register: RTC_EVTENCLR */
05609 /* Description: Disable events routing to PPI. The reading of this register gives the value of EVTEN. */
05610 
05611 /* Bit 19 : Disable routing to PPI of COMPARE[3] event. */
05612 #define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
05613 #define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
05614 #define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Event disabled. */
05615 #define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Event enabled. */
05616 #define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable event on write. */
05617 
05618 /* Bit 18 : Disable routing to PPI of COMPARE[2] event. */
05619 #define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
05620 #define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
05621 #define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Event disabled. */
05622 #define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Event enabled. */
05623 #define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable event on write. */
05624 
05625 /* Bit 17 : Disable routing to PPI of COMPARE[1] event. */
05626 #define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
05627 #define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
05628 #define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Event disabled. */
05629 #define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Event enabled. */
05630 #define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable event on write. */
05631 
05632 /* Bit 16 : Disable routing to PPI of COMPARE[0] event. */
05633 #define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
05634 #define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
05635 #define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Event disabled. */
05636 #define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Event enabled. */
05637 #define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable event on write. */
05638 
05639 /* Bit 1 : Disable routing to PPI of OVRFLW event. */
05640 #define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
05641 #define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
05642 #define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Event disabled. */
05643 #define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Event enabled. */
05644 #define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable event on write. */
05645 
05646 /* Bit 0 : Disable routing to PPI of TICK event. */
05647 #define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */
05648 #define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */
05649 #define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Event disabled. */
05650 #define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Event enabled. */
05651 #define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable event on write. */
05652 
05653 /* Register: RTC_COUNTER */
05654 /* Description: Current COUNTER value. */
05655 
05656 /* Bits 23..0 : Counter value. */
05657 #define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */
05658 #define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */
05659 
05660 /* Register: RTC_PRESCALER */
05661 /* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */
05662 
05663 /* Bits 11..0 : RTC PRESCALER value. */
05664 #define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */
05665 #define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */
05666 
05667 /* Register: RTC_CC */
05668 /* Description: Capture/compare registers. */
05669 
05670 /* Bits 23..0 : Compare value. */
05671 #define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */
05672 #define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */
05673 
05674 /* Register: RTC_POWER */
05675 /* Description: Peripheral power control. */
05676 
05677 /* Bit 0 : Peripheral power control. */
05678 #define RTC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
05679 #define RTC_POWER_POWER_Msk (0x1UL << RTC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
05680 #define RTC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
05681 #define RTC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
05682 
05683 
05684 /* Peripheral: SPI */
05685 /* Description: SPI master 0. */
05686 
05687 /* Register: SPI_INTENSET */
05688 /* Description: Interrupt enable set register. */
05689 
05690 /* Bit 2 : Enable interrupt on READY event. */
05691 #define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */
05692 #define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
05693 #define SPI_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */
05694 #define SPI_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */
05695 #define SPI_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */
05696 
05697 /* Register: SPI_INTENCLR */
05698 /* Description: Interrupt enable clear register. */
05699 
05700 /* Bit 2 : Disable interrupt on READY event. */
05701 #define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */
05702 #define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
05703 #define SPI_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */
05704 #define SPI_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */
05705 #define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */
05706 
05707 /* Register: SPI_ENABLE */
05708 /* Description: Enable SPI. */
05709 
05710 /* Bits 2..0 : Enable or disable SPI. */
05711 #define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
05712 #define SPI_ENABLE_ENABLE_Msk (0x7UL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
05713 #define SPI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPI. */
05714 #define SPI_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable SPI. */
05715 
05716 /* Register: SPI_RXD */
05717 /* Description: RX data. */
05718 
05719 /* Bits 7..0 : RX data from last transfer. */
05720 #define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */
05721 #define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */
05722 
05723 /* Register: SPI_TXD */
05724 /* Description: TX data. */
05725 
05726 /* Bits 7..0 : TX data for next transfer. */
05727 #define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */
05728 #define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */
05729 
05730 /* Register: SPI_FREQUENCY */
05731 /* Description: SPI frequency */
05732 
05733 /* Bits 31..0 : SPI data rate. */
05734 #define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
05735 #define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
05736 #define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125kbps. */
05737 #define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250kbps. */
05738 #define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500kbps. */
05739 #define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1Mbps. */
05740 #define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2Mbps. */
05741 #define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4Mbps. */
05742 #define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8Mbps. */
05743 
05744 /* Register: SPI_CONFIG */
05745 /* Description: Configuration register. */
05746 
05747 /* Bit 2 : Serial clock (SCK) polarity. */
05748 #define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */
05749 #define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */
05750 #define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */
05751 #define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */
05752 
05753 /* Bit 1 : Serial clock (SCK) phase. */
05754 #define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */
05755 #define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */
05756 #define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */
05757 #define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */
05758 
05759 /* Bit 0 : Bit order. */
05760 #define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */
05761 #define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */
05762 #define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */
05763 #define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */
05764 
05765 /* Register: SPI_POWER */
05766 /* Description: Peripheral power control. */
05767 
05768 /* Bit 0 : Peripheral power control. */
05769 #define SPI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
05770 #define SPI_POWER_POWER_Msk (0x1UL << SPI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
05771 #define SPI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
05772 #define SPI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
05773 
05774 
05775 /* Peripheral: SPIM */
05776 /* Description: SPI master with easyDMA 1. */
05777 
05778 /* Register: SPIM_INTENSET */
05779 /* Description: Interrupt enable set register. */
05780 
05781 /* Bit 19 : Enable interrupt on STARTED event. */
05782 #define SPIM_INTENSET_STARTED_Pos (19UL) /*!< Position of STARTED field. */
05783 #define SPIM_INTENSET_STARTED_Msk (0x1UL << SPIM_INTENSET_STARTED_Pos) /*!< Bit mask of STARTED field. */
05784 #define SPIM_INTENSET_STARTED_Disabled (0UL) /*!< Interrupt disabled. */
05785 #define SPIM_INTENSET_STARTED_Enabled (1UL) /*!< Interrupt enabled. */
05786 #define SPIM_INTENSET_STARTED_Set (1UL) /*!< Enable interrupt on write. */
05787 
05788 /* Bit 8 : Enable interrupt on ENDTX event. */
05789 #define SPIM_INTENSET_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */
05790 #define SPIM_INTENSET_ENDTX_Msk (0x1UL << SPIM_INTENSET_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
05791 #define SPIM_INTENSET_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */
05792 #define SPIM_INTENSET_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */
05793 #define SPIM_INTENSET_ENDTX_Set (1UL) /*!< Enable interrupt on write. */
05794 
05795 /* Bit 4 : Enable interrupt on ENDRX event. */
05796 #define SPIM_INTENSET_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
05797 #define SPIM_INTENSET_ENDRX_Msk (0x1UL << SPIM_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
05798 #define SPIM_INTENSET_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */
05799 #define SPIM_INTENSET_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */
05800 #define SPIM_INTENSET_ENDRX_Set (1UL) /*!< Enable interrupt on write. */
05801 
05802 /* Bit 1 : Enable interrupt on STOPPED event. */
05803 #define SPIM_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
05804 #define SPIM_INTENSET_STOPPED_Msk (0x1UL << SPIM_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
05805 #define SPIM_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */
05806 #define SPIM_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */
05807 #define SPIM_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */
05808 
05809 /* Register: SPIM_INTENCLR */
05810 /* Description: Interrupt enable clear register. */
05811 
05812 /* Bit 19 : Disable interrupt on STARTED event. */
05813 #define SPIM_INTENCLR_STARTED_Pos (19UL) /*!< Position of STARTED field. */
05814 #define SPIM_INTENCLR_STARTED_Msk (0x1UL << SPIM_INTENCLR_STARTED_Pos) /*!< Bit mask of STARTED field. */
05815 #define SPIM_INTENCLR_STARTED_Disabled (0UL) /*!< Interrupt disabled. */
05816 #define SPIM_INTENCLR_STARTED_Enabled (1UL) /*!< Interrupt enabled. */
05817 #define SPIM_INTENCLR_STARTED_Clear (1UL) /*!< Disable interrupt on write. */
05818 
05819 /* Bit 8 : Disable interrupt on ENDTX event. */
05820 #define SPIM_INTENCLR_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */
05821 #define SPIM_INTENCLR_ENDTX_Msk (0x1UL << SPIM_INTENCLR_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
05822 #define SPIM_INTENCLR_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */
05823 #define SPIM_INTENCLR_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */
05824 #define SPIM_INTENCLR_ENDTX_Clear (1UL) /*!< Disable interrupt on write. */
05825 
05826 /* Bit 4 : Disable interrupt on ENDRX event. */
05827 #define SPIM_INTENCLR_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
05828 #define SPIM_INTENCLR_ENDRX_Msk (0x1UL << SPIM_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
05829 #define SPIM_INTENCLR_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */
05830 #define SPIM_INTENCLR_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */
05831 #define SPIM_INTENCLR_ENDRX_Clear (1UL) /*!< Disable interrupt on write. */
05832 
05833 /* Bit 1 : Disable interrupt on STOPPED event. */
05834 #define SPIM_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
05835 #define SPIM_INTENCLR_STOPPED_Msk (0x1UL << SPIM_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
05836 #define SPIM_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */
05837 #define SPIM_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */
05838 #define SPIM_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */
05839 
05840 /* Register: SPIM_ENABLE */
05841 /* Description: Enable SPIM. */
05842 
05843 /* Bits 3..0 : Enable or disable SPIM. */
05844 #define SPIM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
05845 #define SPIM_ENABLE_ENABLE_Msk (0xFUL << SPIM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
05846 #define SPIM_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIM. */
05847 #define SPIM_ENABLE_ENABLE_Enabled (0x07UL) /*!< Enable SPIM. */
05848 
05849 /* Register: SPIM_FREQUENCY */
05850 /* Description: SPI frequency. */
05851 
05852 /* Bits 31..0 : SPI master data rate. */
05853 #define SPIM_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
05854 #define SPIM_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPIM_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
05855 #define SPIM_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125 kbps. */
05856 #define SPIM_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */
05857 #define SPIM_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500 kbps. */
05858 #define SPIM_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1 Mbps. */
05859 #define SPIM_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2 Mbps. */
05860 #define SPIM_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4 Mbps. */
05861 #define SPIM_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8 Mbps. */
05862 
05863 /* Register: SPIM_RXD_PTR */
05864 /* Description: Data pointer. */
05865 
05866 /* Bits 31..0 : Data pointer. */
05867 #define SPIM_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
05868 #define SPIM_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
05869 
05870 /* Register: SPIM_RXD_MAXCNT */
05871 /* Description: Maximum number of buffer bytes to receive. */
05872 
05873 /* Bits 7..0 : Maximum number of buffer bytes to receive. */
05874 #define SPIM_RXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
05875 #define SPIM_RXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_RXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
05876 
05877 /* Register: SPIM_RXD_AMOUNT */
05878 /* Description: Number of bytes received in the last transaction. */
05879 
05880 /* Bits 7..0 : Number of bytes received in the last transaction. */
05881 #define SPIM_RXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
05882 #define SPIM_RXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_RXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
05883 
05884 /* Register: SPIM_TXD_PTR */
05885 /* Description: Data pointer. */
05886 
05887 /* Bits 31..0 : Data pointer. */
05888 #define SPIM_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
05889 #define SPIM_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
05890 
05891 /* Register: SPIM_TXD_MAXCNT */
05892 /* Description: Maximum number of buffer bytes to send. */
05893 
05894 /* Bits 7..0 : Maximum number of buffer bytes to send. */
05895 #define SPIM_TXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
05896 #define SPIM_TXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_TXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
05897 
05898 /* Register: SPIM_TXD_AMOUNT */
05899 /* Description: Number of bytes sent in the last transaction. */
05900 
05901 /* Bits 7..0 : Number of bytes sent in the last transaction. */
05902 #define SPIM_TXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
05903 #define SPIM_TXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_TXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
05904 
05905 /* Register: SPIM_CONFIG */
05906 /* Description: Configuration register. */
05907 
05908 /* Bit 2 : Serial clock (SCK) polarity. */
05909 #define SPIM_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */
05910 #define SPIM_CONFIG_CPOL_Msk (0x1UL << SPIM_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */
05911 #define SPIM_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */
05912 #define SPIM_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */
05913 
05914 /* Bit 1 : Serial clock (SCK) phase. */
05915 #define SPIM_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */
05916 #define SPIM_CONFIG_CPHA_Msk (0x1UL << SPIM_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */
05917 #define SPIM_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */
05918 #define SPIM_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */
05919 
05920 /* Bit 0 : Bit order. */
05921 #define SPIM_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */
05922 #define SPIM_CONFIG_ORDER_Msk (0x1UL << SPIM_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */
05923 #define SPIM_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */
05924 #define SPIM_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */
05925 
05926 /* Register: SPIM_ORC */
05927 /* Description: Over-read character. */
05928 
05929 /* Bits 7..0 : Over-read character. */
05930 #define SPIM_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */
05931 #define SPIM_ORC_ORC_Msk (0xFFUL << SPIM_ORC_ORC_Pos) /*!< Bit mask of ORC field. */
05932 
05933 /* Register: SPIM_POWER */
05934 /* Description: Peripheral power control. */
05935 
05936 /* Bit 0 : Peripheral power control. */
05937 #define SPIM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
05938 #define SPIM_POWER_POWER_Msk (0x1UL << SPIM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
05939 #define SPIM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
05940 #define SPIM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
05941 
05942 
05943 /* Peripheral: SPIS */
05944 /* Description: SPI slave 1. */
05945 
05946 /* Register: SPIS_SHORTS */
05947 /* Description: Shortcuts for SPIS. */
05948 
05949 /* Bit 2 : Shortcut between END event and the ACQUIRE task. */
05950 #define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */
05951 #define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */
05952 #define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Shortcut disabled. */
05953 #define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Shortcut enabled. */
05954 
05955 /* Register: SPIS_INTENSET */
05956 /* Description: Interrupt enable set register. */
05957 
05958 /* Bit 10 : Enable interrupt on ACQUIRED event. */
05959 #define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */
05960 #define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */
05961 #define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */
05962 #define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */
05963 #define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable interrupt on write. */
05964 
05965 /* Bit 4 : enable interrupt on ENDRX event. */
05966 #define SPIS_INTENSET_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
05967 #define SPIS_INTENSET_ENDRX_Msk (0x1UL << SPIS_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
05968 #define SPIS_INTENSET_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */
05969 #define SPIS_INTENSET_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */
05970 #define SPIS_INTENSET_ENDRX_Set (1UL) /*!< Enable interrupt on write. */
05971 
05972 /* Bit 1 : Enable interrupt on END event. */
05973 #define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */
05974 #define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */
05975 #define SPIS_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
05976 #define SPIS_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
05977 #define SPIS_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
05978 
05979 /* Register: SPIS_INTENCLR */
05980 /* Description: Interrupt enable clear register. */
05981 
05982 /* Bit 10 : Disable interrupt on ACQUIRED event. */
05983 #define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */
05984 #define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */
05985 #define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */
05986 #define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */
05987 #define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable interrupt on write. */
05988 
05989 /* Bit 4 : Disable interrupt on ENDRX event. */
05990 #define SPIS_INTENCLR_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
05991 #define SPIS_INTENCLR_ENDRX_Msk (0x1UL << SPIS_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
05992 #define SPIS_INTENCLR_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */
05993 #define SPIS_INTENCLR_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */
05994 #define SPIS_INTENCLR_ENDRX_Clear (1UL) /*!< Disable interrupt on write. */
05995 
05996 /* Bit 1 : Disable interrupt on END event. */
05997 #define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */
05998 #define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */
05999 #define SPIS_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
06000 #define SPIS_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
06001 #define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
06002 
06003 /* Register: SPIS_SEMSTAT */
06004 /* Description: Semaphore status. */
06005 
06006 /* Bits 1..0 : Semaphore status. */
06007 #define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */
06008 #define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */
06009 #define SPIS_SEMSTAT_SEMSTAT_Free (0x00UL) /*!< Semaphore is free. */
06010 #define SPIS_SEMSTAT_SEMSTAT_CPU (0x01UL) /*!< Semaphore is assigned to the CPU. */
06011 #define SPIS_SEMSTAT_SEMSTAT_SPIS (0x02UL) /*!< Semaphore is assigned to the SPIS. */
06012 #define SPIS_SEMSTAT_SEMSTAT_CPUPending (0x03UL) /*!< Semaphore is assigned to the SPIS, but a handover to the CPU is pending. */
06013 
06014 /* Register: SPIS_STATUS */
06015 /* Description: Status from last transaction. */
06016 
06017 /* Bit 1 : RX buffer overflow detected, and prevented. */
06018 #define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */
06019 #define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */
06020 #define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Error not present. */
06021 #define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Error present. */
06022 #define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Clear on write. */
06023 
06024 /* Bit 0 : TX buffer overread detected, and prevented. */
06025 #define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */
06026 #define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */
06027 #define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Error not present. */
06028 #define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Error present. */
06029 #define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Clear on write. */
06030 
06031 /* Register: SPIS_ENABLE */
06032 /* Description: Enable SPIS. */
06033 
06034 /* Bits 2..0 : Enable or disable SPIS. */
06035 #define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
06036 #define SPIS_ENABLE_ENABLE_Msk (0x7UL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
06037 #define SPIS_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIS. */
06038 #define SPIS_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable SPIS. */
06039 
06040 /* Register: SPIS_MAXRX */
06041 /* Description: Maximum number of bytes in the receive buffer. */
06042 
06043 /* Bits 7..0 : Maximum number of bytes in the receive buffer. */
06044 #define SPIS_MAXRX_MAXRX_Pos (0UL) /*!< Position of MAXRX field. */
06045 #define SPIS_MAXRX_MAXRX_Msk (0xFFUL << SPIS_MAXRX_MAXRX_Pos) /*!< Bit mask of MAXRX field. */
06046 
06047 /* Register: SPIS_AMOUNTRX */
06048 /* Description: Number of bytes received in last granted transaction. */
06049 
06050 /* Bits 7..0 : Number of bytes received in last granted transaction. */
06051 #define SPIS_AMOUNTRX_AMOUNTRX_Pos (0UL) /*!< Position of AMOUNTRX field. */
06052 #define SPIS_AMOUNTRX_AMOUNTRX_Msk (0xFFUL << SPIS_AMOUNTRX_AMOUNTRX_Pos) /*!< Bit mask of AMOUNTRX field. */
06053 
06054 /* Register: SPIS_MAXTX */
06055 /* Description: Maximum number of bytes in the transmit buffer. */
06056 
06057 /* Bits 7..0 : Maximum number of bytes in the transmit buffer. */
06058 #define SPIS_MAXTX_MAXTX_Pos (0UL) /*!< Position of MAXTX field. */
06059 #define SPIS_MAXTX_MAXTX_Msk (0xFFUL << SPIS_MAXTX_MAXTX_Pos) /*!< Bit mask of MAXTX field. */
06060 
06061 /* Register: SPIS_AMOUNTTX */
06062 /* Description: Number of bytes transmitted in last granted transaction. */
06063 
06064 /* Bits 7..0 : Number of bytes transmitted in last granted transaction. */
06065 #define SPIS_AMOUNTTX_AMOUNTTX_Pos (0UL) /*!< Position of AMOUNTTX field. */
06066 #define SPIS_AMOUNTTX_AMOUNTTX_Msk (0xFFUL << SPIS_AMOUNTTX_AMOUNTTX_Pos) /*!< Bit mask of AMOUNTTX field. */
06067 
06068 /* Register: SPIS_CONFIG */
06069 /* Description: Configuration register. */
06070 
06071 /* Bit 2 : Serial clock (SCK) polarity. */
06072 #define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */
06073 #define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */
06074 #define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */
06075 #define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */
06076 
06077 /* Bit 1 : Serial clock (SCK) phase. */
06078 #define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */
06079 #define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */
06080 #define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */
06081 #define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */
06082 
06083 /* Bit 0 : Bit order. */
06084 #define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */
06085 #define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */
06086 #define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */
06087 #define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */
06088 
06089 /* Register: SPIS_DEF */
06090 /* Description: Default character. */
06091 
06092 /* Bits 7..0 : Default character. */
06093 #define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */
06094 #define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */
06095 
06096 /* Register: SPIS_ORC */
06097 /* Description: Over-read character. */
06098 
06099 /* Bits 7..0 : Over-read character. */
06100 #define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */
06101 #define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */
06102 
06103 /* Register: SPIS_POWER */
06104 /* Description: Peripheral power control. */
06105 
06106 /* Bit 0 : Peripheral power control. */
06107 #define SPIS_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
06108 #define SPIS_POWER_POWER_Msk (0x1UL << SPIS_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
06109 #define SPIS_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
06110 #define SPIS_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
06111 
06112 
06113 /* Peripheral: TEMP */
06114 /* Description: Temperature Sensor. */
06115 
06116 /* Register: TEMP_INTENSET */
06117 /* Description: Interrupt enable set register. */
06118 
06119 /* Bit 0 : Enable interrupt on DATARDY event. */
06120 #define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */
06121 #define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */
06122 #define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */
06123 #define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */
06124 #define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable interrupt on write. */
06125 
06126 /* Register: TEMP_INTENCLR */
06127 /* Description: Interrupt enable clear register. */
06128 
06129 /* Bit 0 : Disable interrupt on DATARDY event. */
06130 #define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */
06131 #define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */
06132 #define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */
06133 #define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */
06134 #define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable interrupt on write. */
06135 
06136 /* Register: TEMP_POWER */
06137 /* Description: Peripheral power control. */
06138 
06139 /* Bit 0 : Peripheral power control. */
06140 #define TEMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
06141 #define TEMP_POWER_POWER_Msk (0x1UL << TEMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
06142 #define TEMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
06143 #define TEMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
06144 
06145 
06146 /* Peripheral: TIMER */
06147 /* Description: Timer 0. */
06148 
06149 /* Register: TIMER_SHORTS */
06150 /* Description: Shortcuts for Timer. */
06151 
06152 /* Bit 11 : Shortcut between CC[3] event and the STOP task. */
06153 #define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */
06154 #define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */
06155 #define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Shortcut disabled. */
06156 #define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Shortcut enabled. */
06157 
06158 /* Bit 10 : Shortcut between CC[2] event and the STOP task. */
06159 #define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */
06160 #define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */
06161 #define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Shortcut disabled. */
06162 #define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Shortcut enabled. */
06163 
06164 /* Bit 9 : Shortcut between CC[1] event and the STOP task. */
06165 #define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */
06166 #define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */
06167 #define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Shortcut disabled. */
06168 #define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Shortcut enabled. */
06169 
06170 /* Bit 8 : Shortcut between CC[0] event and the STOP task. */
06171 #define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */
06172 #define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */
06173 #define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Shortcut disabled. */
06174 #define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Shortcut enabled. */
06175 
06176 /* Bit 3 : Shortcut between CC[3] event and the CLEAR task. */
06177 #define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */
06178 #define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */
06179 #define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
06180 #define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
06181 
06182 /* Bit 2 : Shortcut between CC[2] event and the CLEAR task. */
06183 #define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */
06184 #define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */
06185 #define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
06186 #define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
06187 
06188 /* Bit 1 : Shortcut between CC[1] event and the CLEAR task. */
06189 #define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */
06190 #define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */
06191 #define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
06192 #define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
06193 
06194 /* Bit 0 : Shortcut between CC[0] event and the CLEAR task. */
06195 #define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */
06196 #define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */
06197 #define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
06198 #define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
06199 
06200 /* Register: TIMER_INTENSET */
06201 /* Description: Interrupt enable set register. */
06202 
06203 /* Bit 19 : Enable interrupt on COMPARE[3] */
06204 #define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
06205 #define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
06206