File content as of revision 15:e901aff1f5b3:

// Here are the functions to generate the CAN messages
#include "CANParserBMU.h"
#include "mbed.h"
#include "Data_Types_BMU.h"


using namespace CAN_IDs;

/**
* This function is rewritten to give readings for individual probes rather than
* for specific CMU. As a consequence, 0x800 onwards is being used for these probes,
* as everything above about 0x700 is unused by the Tritium standard. The ID value
* for the probe is based on the ROM field of DS1820, entries 1-6 being the unique
* serial value.
*/
CANMessage createTemperatureTelemetry(uint8_t offset, char ProbeROM[8], float Temperature)
{
    CANMessage msg;
    msg.len = 8;
    msg.id = TEMPERATURE_BASE_ID + offset; // for temp it is 0x800 onwards
    CAN_Data data;

    //data.setLower_uLong(ProbeID);
    //data.setUpperFloat(Temperature);

    for(int i = 1; i <= 6; i++) //ID portion of ROM array
    {
        data.set_u8(i - 1, ProbeROM[i]);
    }
    //Conversion of float to a short, requires multiplying by 100 to not lose precision
    float temp100 = Temperature * 100;
    short shortTemp = (short) temp100;
    data.set_16(3, shortTemp);//There seems to be an error in the function definition for set_16, (ushort instead of short)
    
    for (int i = 0; i<8; i++) {
        msg.data[i] = data.get_u8(i);
    }

    return msg;
}
/**
* Takes a CANMessage with precondition that it stores temperature of an individual
* probe and returns an individual_temperature object containing ID and reading.
* The ID is stores in ROM array entry 1-6, other entries may be invalid.
*/
individual_temperature decodeTemperatureTelemetry(CANMessage msg)
{
    individual_temperature probe_reading;
    CAN_Data decode;
    
    decode.importCANData(msg);
    short shortTemp = decode.get_16(3);
    probe_reading.measurement = ((float)shortTemp) / 100;
    
    for(int i = 1; i <=6; i++)
    {
        probe_reading.ROMID[i] = decode.get_u8(i-1);    
    }
    
    return probe_reading;
}

CANMessage createVoltageTelemetry(int offset_id, uint16_t voltage[])
{
    CANMessage msg;
    msg.len = 8;
    msg.id = BMS_BASE_ID + offset_id; // for voltage 0x601 - 0x6EF @TODO
    CAN_Data data;

    data.set_u16(0, voltage[0]);
    data.set_u16(1, voltage[1]);
    data.set_u16(2, voltage[2]);
    data.set_u16(3, voltage[3]);

    for (int i = 0; i<8; i++) {
        msg.data[i] = data.get_u8(i);
    }

    return msg;
}

CANMessage createPackSOC(float SOC, float percentageCharge)
{
    CANMessage msg;
    msg.len = 8;
    msg.id = BMS_BASE_ID + BATTERY_SOC_ID;
    CAN_Data data;
    data.setLowerFloat(SOC);
    data.setUpperFloat(percentageCharge);
    for(int i=0; i<8; i++) {
        msg.data[i] = data.get_u8(i);
    }

    return msg;
}

CANMessage createPackBalanceSOC(float SOC, float percentageCharge)
{
    // @TODO - check is this being used?? section 5.4 trituim BMU CAN data sheet
    CANMessage msg;
    msg.len = 8;
    msg.id = BMS_BASE_ID + BATTERY_SOC_BASE_ID;

    CAN_Data data;
    data.setLowerFloat(SOC);
    data.setUpperFloat(percentageCharge);
    for(int i=0; i<8; i++) {
        msg.data[i] = data.get_u8(i);
    }

    return msg;
}

CANMessage createCellVoltageMAXMIN(pack_voltage_extremes max_voltage, pack_voltage_extremes min_voltage)
{
    CANMessage msg;
    msg.len = 8;
    msg.id = BMS_BASE_ID + MAX_MIN_VOLTAGE;

    CAN_Data data;
    data.set_u16(0,min_voltage.voltage);   //Min voltage
    data.set_u16(1,max_voltage.voltage);   //Max voltage
    data.set_u8(4,min_voltage.CMU_number);  //CMU number of lowest cell
    data.set_u8(5,min_voltage.cell_number);  //Cell number in CMU with lowest voltage
    data.set_u8(6,min_voltage.CMU_number);  //CMU number of maxiumum cell
    data.set_u8(7,min_voltage.cell_number);  //Cell number in CMU with highest voltage

    for(int i=0; i<8; i++) {
        msg.data[i] = data.get_u8(i);
    }

    return msg;
}

CANMessage createCellTemperatureMAXMIN(pack_temperature_extremes min_temperature, pack_temperature_extremes max_temperature)
{
    CANMessage msg;
    msg.len = 8;
    msg.id = BMS_BASE_ID + MAX_MIN_TEMPERATURE;

    CAN_Data data;
    data.set_u16(0,min_temperature.temperature);   //Min temperature
    data.set_u16(1,max_temperature.temperature);   //Max temperature
    data.set_u8(4,min_temperature.CMU_number);  //CMU number of lowest temperature cell
    data.set_u8(5,BLANK_DATA);  //Dummy data
    data.set_u8(6,max_temperature.CMU_number);  //CMU number of maxiumum temperature cell
    data.set_u8(7,BLANK_DATA);  //Dummy data

    for(int i=0; i<8; i++) {
        msg.data[i] = data.get_u8(i);
    }

    return msg;
}

CANMessage createBatteryVI(uint32_t batteryVoltage,uint32_t batteryCurrent)
{
    CANMessage msg;
    msg.len = 8;
    msg.id = BMS_BASE_ID + BATTERY_VI_ID;

    CAN_Data data;
    data.setLower_uLong(batteryVoltage);
    data.setHigher_uLong(batteryCurrent);

    for(int i=0; i<8; i++) {
        msg.data[i] = data.get_u8(i);
    }
    return msg;
}

CANMessage createBatteryPackStatus(uint16_t voltageThreshold[], uint8_t statusFlag,uint8_t BMS_CMU_Count,uint16_t BMS_Firmware_Build)
{
    CANMessage msg;
    msg.len = 8;
    msg.id = BMS_BASE_ID + BATTERY_PACK_STATUS_ID;

    CAN_Data data;
    data.set_u16(0,voltageThreshold[0]);
    data.set_u16(1,voltageThreshold[1]);
    data.set_16(3,BMS_Firmware_Build);
    data.set_u8(4,statusFlag);
    data.set_u8(5,BMS_CMU_Count);

    for(int i=0; i<8; i++) {
        msg.data[i] = data.get_u8(i);
    }
    return msg;
}

CANMessage createExtendedBatteryPackStatus(uint32_t status)
{
    CANMessage msg;
    msg.len = 8;
    msg.id = BMS_BASE_ID + BATTERY_STATUS_ID;

    CAN_Data data;
    data.setLower_uLong(status); //@TODO see the data sheet for this
    data.set_u8(4,0x00);//Hardware version random data @TODO check this
    data.set_u8(5,0x00);//Model ID @TODO check this
    data.set_u16(3,0x00); // Unused

    for(int i=0; i<8; i++) {
        msg.data[i] = data.get_u8(i);
    }
    return msg;
}

void convertFloatFloat(float lower, float upper, CANMessage& msg, bool littleEndian)
{
    // Code taken from driver_controls
    //two converters for lower and higher float
    float2byte convL;
    float2byte convH;
    convL.f = lower;
    convH.f = upper;
    if(littleEndian) {
        for(int i=0; i<4; i++) {
            msg.data[i] = convL.b[i];
            //offset for upper float
            msg.data[i+4]=convH.b[i];
        }
    } else {
        for(int i=0; i<4; i++) {
            /*
            * Subtract because output data is Big Endian
            * i.e. convL/H is LSB --> MSB
            * output is       MSB --> LSB
            */

            msg.data[4-i] = convL.b[i];
            msg.data[7-i] = convH.b[i];
        }
    }

}