Egor Syomin / Mbed 2 deprecated LG

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependencies:   mbed

Fork of LG by igor Apu

commandset.c@0:8ad47e2b6f00, 2016-01-30 (annotated)

Committer:
igor_v
Date:
Sat Jan 30 13:00:39 2016 +0000
Revision:
0:8ad47e2b6f00
Child:
1:f2adcae3d304
2016_01_30;

Who changed what in which revision?

UserRevisionLine numberNew contents of line
igor_v 0:8ad47e2b6f00 1 #include <string.h>
igor_v 0:8ad47e2b6f00 2 #include "commandset.h"
igor_v 0:8ad47e2b6f00 3 #include "el_lin.h"
igor_v 0:8ad47e2b6f00 4 #include "CyclesSync.h"
igor_v 0:8ad47e2b6f00 5 #include "CntrlGLD.h"
igor_v 0:8ad47e2b6f00 6 #include "InputOutput.h"
igor_v 0:8ad47e2b6f00 7 #include "Parameters.h"
igor_v 0:8ad47e2b6f00 8
igor_v 0:8ad47e2b6f00 9 #define COMMAND_DEBUG
igor_v 0:8ad47e2b6f00 10
igor_v 0:8ad47e2b6f00 11 //++++++++++++++++debug++++++++++++++++
igor_v 0:8ad47e2b6f00 12 extern uint32_t In_Flag;
igor_v 0:8ad47e2b6f00 13 unsigned char BuffTemp1[100];
igor_v 0:8ad47e2b6f00 14 //e. +++++++++++++++++++ variables +++++++++++++++++++++++++++++++++++++++++++ //r. +++++++++++++++++++ ïåðåìåííûå +++++++++++++++++++++++++++++++++++++++++++
igor_v 0:8ad47e2b6f00 15 uint32_t CMD_Mode = 0; //e. operation mode of the device //r. ðåæèì ðàáîòû óñòðîéñòâà
igor_v 0:8ad47e2b6f00 16 uint32_t CMD_Code; //e. full code of the last recieved command //r. ïîëíûé êîä ïîñëåäíåé ïðèíÿòîé êîìàíäû
igor_v 0:8ad47e2b6f00 17 uint32_t wrk_period; //e. run period in cycles //r. ðàáî÷èé ïåðèîä â öèêëàõ
igor_v 0:8ad47e2b6f00 18 uint32_t blt_in_test;
igor_v 0:8ad47e2b6f00 19
igor_v 0:8ad47e2b6f00 20 int32_t ScopeMode; //e. mode of display for a control point of an scope //r. ðåæèì îòîáðàæåíèÿ äëÿ êîíòðîëüíîé òî÷êè îñöèëëîãðàôà
igor_v 0:8ad47e2b6f00 21
igor_v 0:8ad47e2b6f00 22
igor_v 0:8ad47e2b6f00 23 void SetSpeedPeriod(void) //e.============ procedure of set of rate and periodicity of answer ======== //r.============ ïðîöåäóðà óñòàíîâêè ñêîðîñòè è ïåðèîäè÷íîñòè îòâåòà ========
igor_v 0:8ad47e2b6f00 24 {
igor_v 0:8ad47e2b6f00 25 if ((rcv_buf[3] & 0x0080) != 0) //e. is periodic data transmission needed? //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à òðóáóåòñÿ?
igor_v 0:8ad47e2b6f00 26 {
igor_v 0:8ad47e2b6f00 27 trm_cycl = 1; //e. yes, set present flag //r. äà, óñòàíîâèòü äàííûé ôëàã
igor_v 0:8ad47e2b6f00 28 }
igor_v 0:8ad47e2b6f00 29 else
igor_v 0:8ad47e2b6f00 30 {
igor_v 0:8ad47e2b6f00 31 trm_cycl = 0; //e. no, reset present flag //r. íåò, ñáðîñèòü äàííûé ôëàã
igor_v 0:8ad47e2b6f00 32 }
igor_v 0:8ad47e2b6f00 33
igor_v 0:8ad47e2b6f00 34 SRgR &= 0xffcf; //e. clear the bit of transfer rate //r. î÷èñòêà áèò ñêîðîñòè ïåðåäà÷è
igor_v 0:8ad47e2b6f00 35 trm_rate = (rcv_buf[3] >> 1) & 0x0030;
igor_v 0:8ad47e2b6f00 36 SRgR |= trm_rate; //e. set present transfer rate //r. óñòàíîâèòü äàííóþ ñêîðîñòü ïåðåäà÷è
igor_v 0:8ad47e2b6f00 37 } // SetSpeedPeriod
igor_v 0:8ad47e2b6f00 38
igor_v 0:8ad47e2b6f00 39
igor_v 0:8ad47e2b6f00 40 void B_Delta_BINS(void) //r.===ïðîöåäóðà âûäà÷è íàêîïëåííûõ ðàçíîñòåé ñ÷åò÷èêîâ èìïóëüñîâ â ÈÍÑ â ôîðìàòå 14.18
igor_v 0:8ad47e2b6f00 41 {
igor_v 0:8ad47e2b6f00 42 Valid_Data = 0; // reset all bits of status word
igor_v 0:8ad47e2b6f00 43
igor_v 0:8ad47e2b6f00 44 num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü 2 ïàðàìåòðà
igor_v 0:8ad47e2b6f00 45 addr_param[0] = &Output.Str.BINS_dif; //e. set the first parameter address //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà
igor_v 0:8ad47e2b6f00 46 addr_param[1] = &Valid_Data; //e. set the second paremeter address //r. çàäàòü àäðåñ âòîðîãî ïàðàìåòðà
igor_v 0:8ad47e2b6f00 47 size_param[0] = 4; //e. the length of the 1st parameter is 4 bytes //r. ïàðàìåòð 1 èìåeò äëèíó 4 áàéòà
igor_v 0:8ad47e2b6f00 48 size_param[1] = 1; //e. the length of the 2nd parameter is 1 byte (!! - the high byte, instead of low is transmitted) //r. ïàðàìåòð 2 èìååò äëèíó 1 áàéò (!!! ïåðåäàåòñÿ ñòàðøèé áàéò, à íå ìëàäøèé)
igor_v 0:8ad47e2b6f00 49 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 50
igor_v 0:8ad47e2b6f00 51 } // B_Delta_BINS
igor_v 0:8ad47e2b6f00 52
igor_v 0:8ad47e2b6f00 53 void B_Delta_SF(void) //r.=== ïðîöåäóðà äëÿ èçìåðåíèÿ ìàñøòàáíîãî ìíîæèòåëÿ
igor_v 0:8ad47e2b6f00 54 {
igor_v 0:8ad47e2b6f00 55 //e. time for data transfer has come, we work only with dither counters //r. ïðèøëî âðåìÿ ïåðåäàâàòü äàííûå, ðàáîòàåì òîëüêî ñ âèáðî-ñ÷åò÷èêàìè
igor_v 0:8ad47e2b6f00 56 RgConB = RATE_VIBRO_1; //e. set in the additional register of device control the mode of work with dither counters and the filter of moving average //r. óñòàíàâëèâàåì â äîïîëíèòåëüíîì ðåãèñòðå óïðàâëåíèÿ ðåæèì ðàáîòû ñ âèáðîñ÷åò÷èêàìè è ôèëüòðîì ñêîëüçÿùåãî ñðåäíåãî
igor_v 0:8ad47e2b6f00 57
igor_v 0:8ad47e2b6f00 58 Valid_Data = 0; // reset all bits of status word
igor_v 0:8ad47e2b6f00 59
igor_v 0:8ad47e2b6f00 60 num_of_par = 5;//8; //e. 8 parameters output //r. âûâîäèòü 8 ïàðàìåòðà
igor_v 0:8ad47e2b6f00 61 addr_param[0] = &Output.Str.SF_dif; //e. set the first parameter address //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà
igor_v 0:8ad47e2b6f00 62 addr_param[1] = &Out_main_cycle_latch; //e. set the second paremeter address //r. çàäàòü àäðåñ âòîðîãî ïàðàìåòðà
igor_v 0:8ad47e2b6f00 63 addr_param[2] = &Out_T_latch;//F_ras;
igor_v 0:8ad47e2b6f00 64 addr_param[3] = &Output.Str.WP_reg;
igor_v 0:8ad47e2b6f00 65 addr_param[4] = &Output.Str.Tmp_Out;
igor_v 0:8ad47e2b6f00 66 size_param[0] = 8; //e. the length of the 1st parameter is 4 bytes //r. ïàðàìåòð 1 èìåeò äëèíó 4 áàéòà
igor_v 0:8ad47e2b6f00 67 size_param[1] = 4; //e. the length of the 2nd parameter is 1 byte (!! - the high byte, instead of low is transmitted) //r. ïàðàìåòð 2 èìååò äëèíó 1 áàéò (!!! ïåðåäàåòñÿ ñòàðøèé áàéò, à íå ìëàäøèé)
igor_v 0:8ad47e2b6f00 68 size_param[2] = 2;
igor_v 0:8ad47e2b6f00 69 size_param[3] = 2;
igor_v 0:8ad47e2b6f00 70 size_param[4] = 12;
igor_v 0:8ad47e2b6f00 71 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 72 } // B_Delta_SF
igor_v 0:8ad47e2b6f00 73
igor_v 0:8ad47e2b6f00 74 void B_Delta_PS_execution(void)
igor_v 0:8ad47e2b6f00 75 {
igor_v 0:8ad47e2b6f00 76 static void * paramTable[11] = {&(Output.Str.F_ras) , &(Output.Str.HF_reg), &(Output.Str.T_Vibro), &(Output.Str.L_Vibro), &(Output.Str.WP_reg), &(Output.Str.Tmp_Out[0]), &(Output.Str.Tmp_Out[1]), &(Output.Str.Tmp_Out[2]), &(Output.Str.Tmp_Out[3]), &(Output.Str.Tmp_Out[4]), &(Output.Str.Tmp_Out[5])};
igor_v 0:8ad47e2b6f00 77 static uint32_t val, paramTmpWord;
igor_v 0:8ad47e2b6f00 78 static uint32_t * ptr;
igor_v 0:8ad47e2b6f00 79 static uint32_t index = 0;
igor_v 0:8ad47e2b6f00 80
igor_v 0:8ad47e2b6f00 81 if ((index & 1) == 0) // high byte
igor_v 0:8ad47e2b6f00 82 {
igor_v 0:8ad47e2b6f00 83 ptr = (uint32_t*)paramTable[index >> 1];
igor_v 0:8ad47e2b6f00 84 val = *ptr;
igor_v 0:8ad47e2b6f00 85 paramTmpWord = val >> 8; // move it to low byte of word
igor_v 0:8ad47e2b6f00 86 }
igor_v 0:8ad47e2b6f00 87 else
igor_v 0:8ad47e2b6f00 88 {
igor_v 0:8ad47e2b6f00 89 paramTmpWord = val;
igor_v 0:8ad47e2b6f00 90 }
igor_v 0:8ad47e2b6f00 91 paramTmpWord &= 0xFF;
igor_v 0:8ad47e2b6f00 92 paramTmpWord |= index << 8;
igor_v 0:8ad47e2b6f00 93
igor_v 0:8ad47e2b6f00 94 Valid_Data = 0; // reset all bits of status word
igor_v 0:8ad47e2b6f00 95
igor_v 0:8ad47e2b6f00 96
igor_v 0:8ad47e2b6f00 97 num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü 2 ïàðàìåòðà
igor_v 0:8ad47e2b6f00 98 addr_param[0] = &Output.Str.PS_dif; //e. set the first parameter address //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà
igor_v 0:8ad47e2b6f00 99 addr_param[1] = &paramTmpWord;
igor_v 0:8ad47e2b6f00 100 size_param[0] = 2; //e. the 1st parameter has 2 bytes length //r. ïàðàìåòð 1 èìåeò äëèíó 2 áàéò
igor_v 0:8ad47e2b6f00 101 size_param[1] = 2; //e. the 2nd and 3rd parameters have 1 bytes length//r. ïàðàìåòðû 2,3 èìåþò äëèíó 1 áàéò
igor_v 0:8ad47e2b6f00 102 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 103
igor_v 0:8ad47e2b6f00 104 index++;
igor_v 0:8ad47e2b6f00 105 if (index > 21)
igor_v 0:8ad47e2b6f00 106 {
igor_v 0:8ad47e2b6f00 107 index = 0;
igor_v 0:8ad47e2b6f00 108 }
igor_v 0:8ad47e2b6f00 109 } // B_Delta_PS_execution
igor_v 0:8ad47e2b6f00 110
igor_v 0:8ad47e2b6f00 111 void M_Mirror(void) //e.---------------- prepare to transmission of the copy of receiving buffer ------------- //r.---------------- ïîäãîòîâêà ïåðåäà÷è êîïèè ïðèåìíîãî áóôåðà -------------
igor_v 0:8ad47e2b6f00 112 {
igor_v 0:8ad47e2b6f00 113 num_of_par = 1; //e. 1 parameter output //r. âûâîäèòü 1 ïàðàìåòð
igor_v 0:8ad47e2b6f00 114
igor_v 0:8ad47e2b6f00 115 addr_param[0] = &rcv_copy; //e. set the address of the receiving buffer //r. óñòàíîâêà àäðåñà ïðèåìíîãî áóôåðà
igor_v 0:8ad47e2b6f00 116
igor_v 0:8ad47e2b6f00 117 //e. multiply the number of copied words on 2, since each //r. óìíîæèòü ÷èñëî ñêîïèðîâàííûõ ñëîâ íà 2, ò.ê. êàæäîå
igor_v 0:8ad47e2b6f00 118 //e. will be trasferred in two steps: first zero, and then //r. áóäåò ïåðåäàâàòüñ÷ â äâà ïðèåìà: ñíà÷àëà íóëåâîé, à çàòåì
igor_v 0:8ad47e2b6f00 119 size_param[0] = rcv_byt_copy << 1; // multiplay by 2
igor_v 0:8ad47e2b6f00 120 if (size_param[0] >= 64)
igor_v 0:8ad47e2b6f00 121 {
igor_v 0:8ad47e2b6f00 122 size_param[0] = 64; //e. maximal amount - no more than double length of the copy buffer //r. ìàêñèìàëüíîå êîëè÷åñòâî - íå áîëåå äâîéíîé äëèíû áóôåðà-êîïèè
igor_v 0:8ad47e2b6f00 123 }
igor_v 0:8ad47e2b6f00 124 trm_rate = 0; //e. set the transfer rate to the 38400 bauds //r. óñòàíîâèòü ñêîðîñòü ïåðåäà÷è 38400 áîä
igor_v 0:8ad47e2b6f00 125 trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. çàïðåòèòü ïåðåäà÷ó ïàðàìåòðà â öèêëå
igor_v 0:8ad47e2b6f00 126 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 127 } // M_Mirror
igor_v 0:8ad47e2b6f00 128
igor_v 0:8ad47e2b6f00 129 void Mk_Ask1(void) //r.----------------- prepare of the standart answer 1 ---------------------- //r.----------------- ïîäãîòîâêà ñòàíäàðòíîãî îòâåòà 1 ----------------------
igor_v 0:8ad47e2b6f00 130 {
igor_v 0:8ad47e2b6f00 131 CMD_Code &= 0xff00; //e. clear bits of errors //r. î÷èñòèòü â íåì ïîëå îøèáîê
igor_v 0:8ad47e2b6f00 132 num_of_par = 1; //e. total amount parameters in aswer - 1 //r. âñåãî ïàðàìåòðîâ â îòâåòå - 1
igor_v 0:8ad47e2b6f00 133 addr_param[0] = &CMD_Code; //e. and this parameter - returnable command code //r. è ýòîò ïàðàìåòð - âîçâðàùàåìûé êîä êîìàíäû
igor_v 0:8ad47e2b6f00 134 size_param[0] = 2; //e. and both its bytes //r. ïðè÷åì îáà åãî áàéòà
igor_v 0:8ad47e2b6f00 135 trm_ena = 1; //e. allow operation of the transmitter of the device //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà óñòðîéñòâà
igor_v 0:8ad47e2b6f00 136 } // Mk_Ask1
igor_v 0:8ad47e2b6f00 137
igor_v 0:8ad47e2b6f00 138 void Mk_AskDev(void) //r.----------------- answer on a command for device mode set ------------ //r.----------------- Îòâåò íà êîìàíäó óñòàíîâêè ðåæèìà ïðèáîðà ------------
igor_v 0:8ad47e2b6f00 139 {
igor_v 0:8ad47e2b6f00 140 num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü äâà ïàðàìåòðà
igor_v 0:8ad47e2b6f00 141 addr_param[0] = &Device_Mode; //e. address of the counter mode register (intenal latch, external latch, etc.) //r. àäðåñ ðåãèñòðà ðåæèìà ñ÷åò÷èêîâ (âíóòð., âíåøíÿÿ çàùåëêà è ò.ä.)
igor_v 0:8ad47e2b6f00 142 addr_param[1] = &SRgR; //e. address of the mode register of the processor card //r. àäðåñ ðåãèñòðà ðåæèìà ïëàòû ïðîöåññîðà
igor_v 0:8ad47e2b6f00 143 size_param[0] = 2; //e. size of the counter mode register - 2 bytes //r. ðàçìåð ðåãèñòðà ðåæèìà ñ÷åò÷èêîâ - 2 áàéòà
igor_v 0:8ad47e2b6f00 144 size_param[1] = 2; //e. size of the mode register of the processor card //r. ðàçìåð ðåãèñòðà ðåæèìà ïëàòû ïðîöåññîðà
igor_v 0:8ad47e2b6f00 145 trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. çàïðåòèòü ïåðåäà÷ó ïàðàìåòðà â öèêëå
igor_v 0:8ad47e2b6f00 146 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 147 } // Mk_AskDev
igor_v 0:8ad47e2b6f00 148
igor_v 0:8ad47e2b6f00 149 void GLD_Output(void) //e. ----------- Output modes --------- //r. --------- Ðåæèìû âûâîäà ---------
igor_v 0:8ad47e2b6f00 150 {
igor_v 0:8ad47e2b6f00 151 if (Latch_Rdy) //latch appeared
igor_v 0:8ad47e2b6f00 152 {
igor_v 0:8ad47e2b6f00 153 if (trm_cycl)
igor_v 0:8ad47e2b6f00 154 trm_ena = 1; //enable packet generation
igor_v 0:8ad47e2b6f00 155
igor_v 0:8ad47e2b6f00 156 switch (CMD_Mode)
igor_v 0:8ad47e2b6f00 157 {
igor_v 0:8ad47e2b6f00 158 case 1: //e. Delta _PS mode
igor_v 0:8ad47e2b6f00 159 B_Delta_PS_execution();
igor_v 0:8ad47e2b6f00 160 break;
igor_v 0:8ad47e2b6f00 161
igor_v 0:8ad47e2b6f00 162 case 5:
igor_v 0:8ad47e2b6f00 163 CMD_Code &= 0xff1f; //e. reset bits of current command code settings of periodicity and transfer rate //r. ñáðîñèòü â òåêóùåì êîäå êîìàíäû áèòû óñòàíîâêè ïåðèîäè÷íîñòè è ñêîðîñòè ïåðåäà÷è
igor_v 0:8ad47e2b6f00 164 if (CMD_Code == 0xdd02) //e. is it the Rate2 mode? //r. ýòî ðåæèì Rate2?
igor_v 0:8ad47e2b6f00 165 {
igor_v 0:8ad47e2b6f00 166 if (data_Rdy & WHOLE_PERIOD)
igor_v 0:8ad47e2b6f00 167 {
igor_v 0:8ad47e2b6f00 168 trm_ena = 1;
igor_v 0:8ad47e2b6f00 169 }
igor_v 0:8ad47e2b6f00 170 else
igor_v 0:8ad47e2b6f00 171 trm_ena = 0;
igor_v 0:8ad47e2b6f00 172 }
igor_v 0:8ad47e2b6f00 173 break;
igor_v 0:8ad47e2b6f00 174 }
igor_v 0:8ad47e2b6f00 175 }
igor_v 0:8ad47e2b6f00 176 } // GLD_Delta
igor_v 0:8ad47e2b6f00 177
igor_v 0:8ad47e2b6f00 178
igor_v 0:8ad47e2b6f00 179
igor_v 0:8ad47e2b6f00 180 ///// -------- commands -------------------------------------------------------------
igor_v 0:8ad47e2b6f00 181 //e. set main device operation modes: //r. Óñòàíîâêà îñíîâíûõ ðåæèìîâ ðàáîòû ïðèáîðà:
igor_v 0:8ad47e2b6f00 182 //e. 1. acions with counters (internal latch, external latch with request over line, //r. 1. ðàáîòà ñî ñ÷åò÷èêàìè (âíóòðåííÿÿ çàùåëêà, âíåøíÿÿ çàùåëêè ñ çàïðîñîì ïî ëèíèè,
igor_v 0:8ad47e2b6f00 183 //e. external latch without request over line (instant answer after receiving of external latch pulse)) //r. âíåøíÿÿ çàùåëêà áåç çàïðîñà ïî ëèíèè (îòâåò ñðàçó ïîñëå ïðèõîäà èìïóëüñà âíåøí. çàùåëêè))
igor_v 0:8ad47e2b6f00 184 //e. 2. line receiving/transmission rate //r. 2. ñêîðîñòü ïðèåìà/ïåðåäà÷è ïî ëèíèè
igor_v 0:8ad47e2b6f00 185 void B_Dev_Mode(void)
igor_v 0:8ad47e2b6f00 186 {
igor_v 0:8ad47e2b6f00 187 Device_Mode = rcv_buf[3] & 0x00ff; //e. read the byte of command parameter from the receiver buffer //r. ñ÷èòàòü èç áóôåðà ïðèåìíèêà áàéò ïàðàìåòðà êîìàíäû
igor_v 0:8ad47e2b6f00 188 //e. and write it to the counter mode register //r. è çàïèñûâàåì â ðåãèñòð ðåæèìà ñ÷åò÷èêîâ
igor_v 0:8ad47e2b6f00 189 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 190 Mk_AskDev();
igor_v 0:8ad47e2b6f00 191 } // B_Dev_Mode
igor_v 0:8ad47e2b6f00 192
igor_v 0:8ad47e2b6f00 193 void B_BIT_Mode(void)
igor_v 0:8ad47e2b6f00 194 {
igor_v 0:8ad47e2b6f00 195 uint8_t temp;
igor_v 0:8ad47e2b6f00 196
igor_v 0:8ad47e2b6f00 197 temp = rcv_buf[3] & 0x000f & (~((rcv_buf[3] & 0x00f0) >> 4));
igor_v 0:8ad47e2b6f00 198 if (temp == 1) // 1 - const test
igor_v 0:8ad47e2b6f00 199 {
igor_v 0:8ad47e2b6f00 200 Is_BIT = 1;
igor_v 0:8ad47e2b6f00 201 BIT_number = (long)(rcv_buf[4] & 0x00FF) << 24;
igor_v 0:8ad47e2b6f00 202 BIT_number |= (long)(rcv_buf[5] & 0x00FF) << 16;
igor_v 0:8ad47e2b6f00 203 BIT_number |= (long)(rcv_buf[6] & 0x00FF) << 8;
igor_v 0:8ad47e2b6f00 204 BIT_number |= (long)(rcv_buf[7] & 0x00FF);
igor_v 0:8ad47e2b6f00 205 }
igor_v 0:8ad47e2b6f00 206 else
igor_v 0:8ad47e2b6f00 207 {
igor_v 0:8ad47e2b6f00 208 Is_BIT = 0;
igor_v 0:8ad47e2b6f00 209 }
igor_v 0:8ad47e2b6f00 210 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 211 Mk_AskDev();
igor_v 0:8ad47e2b6f00 212 } // B_BIT_Mode
igor_v 0:8ad47e2b6f00 213
igor_v 0:8ad47e2b6f00 214 void M_Stimul(void) //e. === procedure of output of analog (DAC) and digital (flags) stimuluses //r. === ïðîöåäóðà âûâîäà àíàëîãîâûõ (ÖÀÏ) è äèñêðåòíûõ (ôëàãè) ñòèìóëîâ
igor_v 0:8ad47e2b6f00 215 {
igor_v 0:8ad47e2b6f00 216 uint32_t chan;
igor_v 0:8ad47e2b6f00 217
igor_v 0:8ad47e2b6f00 218 ScopeMode = 4; //e. WP_PHASE_DETECTOR allocate a mode of display for a control point of an scope //r. WP_PHASE_DETECTOR íàçíà÷èòü ðåæèì îòîáðàæåíèÿ äëÿ êîíòðîëüíîé òî÷êè îñöèëëîãðàôà
igor_v 0:8ad47e2b6f00 219
igor_v 0:8ad47e2b6f00 220 chan = CMD_Code & 0x0007; //e. extracting the number of stimulus //r. âûäåëåíèå íîìåðà ñòèìóëà
igor_v 0:8ad47e2b6f00 221
igor_v 0:8ad47e2b6f00 222 Output.ArrayOut[chan] = (((int)rcv_buf[4] << 8) | (int)rcv_buf[5])-0x8000;
igor_v 0:8ad47e2b6f00 223
igor_v 0:8ad47e2b6f00 224 if ((CMD_Code & (1 << 7)) == 0) //e. to estimate: whether the answer is required //r. îöåíèòü: òðåáóåòñÿ ëè îòâåò
igor_v 0:8ad47e2b6f00 225 {
igor_v 0:8ad47e2b6f00 226 return; //e. if no - return //r. åñëè íåò - âîçâðàò
igor_v 0:8ad47e2b6f00 227 }
igor_v 0:8ad47e2b6f00 228 Mk_Ask1(); //e. otherwise - answer output //r. èíà÷å - âûäàòü îòâåò
igor_v 0:8ad47e2b6f00 229 } // M_Stymul
igor_v 0:8ad47e2b6f00 230
igor_v 0:8ad47e2b6f00 231 void M_Status(void) //e. === procedure of initialization of transmission of the device status //r. === ïðîöåäóðà èíèöèàëèçàöèè ïåðåäà÷è ñòàòóñà óñòðîéñòâà
igor_v 0:8ad47e2b6f00 232 {
igor_v 0:8ad47e2b6f00 233 SetSpeedPeriod(); //e. and set the answer transfer rate and its periodicity //r. è óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü
igor_v 0:8ad47e2b6f00 234
igor_v 0:8ad47e2b6f00 235 num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü äâà ïàðàìåòðà
igor_v 0:8ad47e2b6f00 236 addr_param[0] = &blt_in_test; //e. the register address of the self-testing result //r. àäðåñ ðåãèñòðà ðåçóëüòàòà ñàìîòåñòèðîâàíèÿ
igor_v 0:8ad47e2b6f00 237 addr_param[1] = &ser_num; //e. address of the register of errors of line //r. àäðåñ ðåãèñòðà îøèáîê ëèíèè
igor_v 0:8ad47e2b6f00 238 size_param[0] = 2; //e. size of the self-test register - 2 bytes //r. ðàçìåð ðåãèñòðà ñàìîòåñòèðîâàíèÿ - 2 áàéòà
igor_v 0:8ad47e2b6f00 239 size_param[1] = 2; //e. size of the register of errors of line //r. ðàçìåð ðåãèñòðà îøèáîê ëèíèè
igor_v 0:8ad47e2b6f00 240
igor_v 0:8ad47e2b6f00 241 trm_rate = 0; //e. set the transfer rate to the 38400 bauds //r. óñòàíîâèòü ñêîðîñòü ïåðåäà÷è 38400 áîä
igor_v 0:8ad47e2b6f00 242 trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. çàïðåòèòü ïåðåäà÷ó ïàðàìåòðà â öèêëå
igor_v 0:8ad47e2b6f00 243 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 244 } // M_Status
igor_v 0:8ad47e2b6f00 245
igor_v 0:8ad47e2b6f00 246 void M_Clear(void) //e.---------------- cleaning of the register of errors of line -------------------------- //r.---------------- î÷èñòêà ðåãèñòðà îøèáîê ëèíèè --------------------------
igor_v 0:8ad47e2b6f00 247 {
igor_v 0:8ad47e2b6f00 248 line_err = 0;
igor_v 0:8ad47e2b6f00 249 } // M_Clear
igor_v 0:8ad47e2b6f00 250
igor_v 0:8ad47e2b6f00 251 void M_Tmp_W(void) //e.----------------- write the command to the AD7714 IC ------------------------- //r.----------------- çàïèñü êîìàíäû â ñõåìû AD7714 -------------------------
igor_v 0:8ad47e2b6f00 252 {
igor_v 0:8ad47e2b6f00 253
igor_v 0:8ad47e2b6f00 254 Mk_Ask1();
igor_v 0:8ad47e2b6f00 255 }
igor_v 0:8ad47e2b6f00 256
igor_v 0:8ad47e2b6f00 257 void M_Tmp_R(void) //e.----------------- read the data from the AD7714 IC -------------------------- //r.----------------- ÷òåíèå äàííûõ èç ñõåì AD7714 --------------------------
igor_v 0:8ad47e2b6f00 258 {
igor_v 0:8ad47e2b6f00 259
igor_v 0:8ad47e2b6f00 260 } // M_Tmp_R
igor_v 0:8ad47e2b6f00 261
igor_v 0:8ad47e2b6f00 262 void M_ADC_R(void) //e.----------------- read the data from the ADCs ADS1250, ADS8321 --------- //r.----------------- ÷òåíèå äàííûõ èç êàíàëîâ ÀÖÏ ADS1250, ADS8321 ---------
igor_v 0:8ad47e2b6f00 263 {
igor_v 0:8ad47e2b6f00 264 SetSpeedPeriod(); //e. set the answer transfer rate and its periodicity //r. óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü
igor_v 0:8ad47e2b6f00 265 UART_SwitchSpeed(trm_rate);
igor_v 0:8ad47e2b6f00 266
igor_v 0:8ad47e2b6f00 267 num_of_par = 4; //e. 4 parameters output //r. âûâîäèòü ÷åòûðå ïàðàìåòðà
igor_v 0:8ad47e2b6f00 268 addr_param[0] = 0; //e. //r. <!-- èñïîëüçîâàëèñü äëÿ ÄÓÏ, òåïåðü íå èñïîëüçóþòñÿ
igor_v 0:8ad47e2b6f00 269 addr_param[1] = 0; //e. //r. -->
igor_v 0:8ad47e2b6f00 270 addr_param[2] = 0;
igor_v 0:8ad47e2b6f00 271 addr_param[3] = &(Input.StrIn.HF_out); //e. set the 4th parameter address _HF_out //r. çàäàòü àäðåñ ÷åòâåðòîãî ïàðàìåòðà _HF_out
igor_v 0:8ad47e2b6f00 272 size_param[0] = 2; //e. size of the parameters - 2 bytes //r. ðàçìåð ïàðàìåòðîâ - 2 áàéòà
igor_v 0:8ad47e2b6f00 273 size_param[1] = 2;
igor_v 0:8ad47e2b6f00 274 size_param[2] = 2;
igor_v 0:8ad47e2b6f00 275 size_param[3] = 2;
igor_v 0:8ad47e2b6f00 276 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 277 } // M_ADC_R
igor_v 0:8ad47e2b6f00 278
igor_v 0:8ad47e2b6f00 279 void M_Cnt_R(void) //r.----------------- read the counters of the Elio5 card -------------------------- //r.----------------- ÷òåíèå ñ÷åò÷èêîâ ïëàòû Elio5 --------------------------
igor_v 0:8ad47e2b6f00 280 {
igor_v 0:8ad47e2b6f00 281 SetSpeedPeriod(); //e. set the answer transfer rate and its periodicity //r. óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü
igor_v 0:8ad47e2b6f00 282 UART_SwitchSpeed(trm_rate);
igor_v 0:8ad47e2b6f00 283 num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü äâà ïàðàìåòðà
igor_v 0:8ad47e2b6f00 284
igor_v 0:8ad47e2b6f00 285 addr_param[0] = &(Output.Str.Cnt_Pls); //e. set the first parameter address //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà
igor_v 0:8ad47e2b6f00 286 addr_param[1] = &(Output.Str.Cnt_Mns); //e. set the second paremeter address //r. çàäàòü àäðåñ âòîðîãî ïàðàìåòðà
igor_v 0:8ad47e2b6f00 287 size_param[0] = 2; //e. size of the parameters - 2 bytes //r. ðàçìåð ïàðàìåòðîâ - 2 áàéòà
igor_v 0:8ad47e2b6f00 288 size_param[1] = 2;
igor_v 0:8ad47e2b6f00 289 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 290 } // M_Cnt_R
igor_v 0:8ad47e2b6f00 291
igor_v 0:8ad47e2b6f00 292 /*void M_e5r_W(void) //r.----------------- write to the mode register of the Elio5 card ------------------ //r.----------------- çàïèñü â ðåãèñòð ðåæèìà ïëàòû Elio5 ------------------
igor_v 0:8ad47e2b6f00 293 {
igor_v 0:8ad47e2b6f00 294 //e. read the byte of command parameter from the receiver buffer //r. ñ÷èòàòü èç áóôåðà ïðèåìíèêà áàéò ïàðàìåòðà êîìàíäû
igor_v 0:8ad47e2b6f00 295 //e. and write it to the card mode register and its copy //r. è çàïèñàòü åãî â ðåãèñòð ðåæèìà ïëàòû è â åãî êîïèþ
igor_v 0:8ad47e2b6f00 296 #if !defined COMMAND_DEBUG
igor_v 0:8ad47e2b6f00 297 Copy_e5_RgR = rcv_buf[3];
igor_v 0:8ad47e2b6f00 298 io_space_write(E5_RGR, Copy_e5_RgR);
igor_v 0:8ad47e2b6f00 299 #endif
igor_v 0:8ad47e2b6f00 300 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 301 Mk_Ask1();
igor_v 0:8ad47e2b6f00 302 } // M_e5r_W */
igor_v 0:8ad47e2b6f00 303 /*
igor_v 0:8ad47e2b6f00 304 void M_e5rA_W(void) //e.----- write to the 1st additional mode register of the Elio5 card ---------- //r.----- çàïèñü â 1-ûé äîïîëíèòåëüíûé ðåãèñòð ðåæèìà ïëàòû Elio5 ----------
igor_v 0:8ad47e2b6f00 305 {
igor_v 0:8ad47e2b6f00 306 //e. this command is used for switching a signal on which data counters are latched: //r. ýòà êîìàíäà èñïîëüçóåòñÿ äëÿ ïåðåêëþ÷åíèÿ ñèãíàëà, ïî êîòîðîìó çàùåëêèâàþòñÿ
igor_v 0:8ad47e2b6f00 307 //e. on the Reper signal or on Sign Meander //r. èíôîðìàöèîííûå ñ÷åò÷èêè: ëèáî ïî Reper`ó ëèáî ïî RefMeandr`ó
igor_v 0:8ad47e2b6f00 308
igor_v 0:8ad47e2b6f00 309 //e. read the byte of command parameter from the receiver buffer //r. ñ÷èòàòü èç áóôåðà ïðèåìíèêà áàéò ïàðàìåòðà êîìàíäû
igor_v 0:8ad47e2b6f00 310 //e. and write it to the card mode register and its copy //r. è çàïèñàòü åãî â ðåãèñòð ðåæèìà ïëàòû è â åãî êîïèþ
igor_v 0:8ad47e2b6f00 311 Copy_e5_RgRA = rcv_buf[3];
igor_v 0:8ad47e2b6f00 312 //??? Device_Mode = Copy_e5_RgRA; //e. and write it to the counter mode register //r. è çàïèñûâàåì â ðåãèñòð ðåæèìà ñ÷åò÷èêîâ
igor_v 0:8ad47e2b6f00 313 #if !defined COMMAND_DEBUG
igor_v 0:8ad47e2b6f00 314 io_space_write(E5_RGRA, Copy_e5_RgRA);
igor_v 0:8ad47e2b6f00 315 #endif
igor_v 0:8ad47e2b6f00 316 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 317 Mk_Ask1();
igor_v 0:8ad47e2b6f00 318 } // M_e5rA_W */
igor_v 0:8ad47e2b6f00 319
igor_v 0:8ad47e2b6f00 320 void M_Ctl_R(void) //r.----------------- reading the control register of the device ----------------- //r.----------------- ÷òåíèå ðåãèñòðà óïðàâëåíèÿ óñòðîéñòâà -----------------
igor_v 0:8ad47e2b6f00 321 {
igor_v 0:8ad47e2b6f00 322 num_of_par = 2; //e. 2 parameters transfer //r. ïåðåäàâàòü 2 ïàðàìåòðà
igor_v 0:8ad47e2b6f00 323 addr_param[0] = &CMD_Code; //e. the first parameter in answer - returned command code //r. ïåðâûé ïàðàìåòð â îòâåòå - âîçâðàùàåìûé êîä êîìàíäû
igor_v 0:8ad47e2b6f00 324 size_param[0] = 2;
igor_v 0:8ad47e2b6f00 325 size_param[1] = 2; //e. two bytes also have control registers //r. äâà áàéòà èìåþò òàêæå è ðåãèñòðû óïðàâëåíèÿ
igor_v 0:8ad47e2b6f00 326 if ((rcv_buf[3] & (1 << 4)) == 0) //e. is main control register needed? //r. òðåáóåòñÿ îñíîâíîé ðåãèñòð óïðàâëåíèÿ?
igor_v 0:8ad47e2b6f00 327 {
igor_v 0:8ad47e2b6f00 328 addr_param[1] = &RgConA; //e. yes //r. äà
igor_v 0:8ad47e2b6f00 329 }
igor_v 0:8ad47e2b6f00 330 else
igor_v 0:8ad47e2b6f00 331 {
igor_v 0:8ad47e2b6f00 332 addr_param[1] = &RgConB; //e. otherwise - load the address of the addititonal register //r. èíà÷å - çàãðóçèòü àäðåñ äîïîëíèòåëüíîãî ðåãèñòðà
igor_v 0:8ad47e2b6f00 333 }
igor_v 0:8ad47e2b6f00 334 CMD_Code &= 0xff10; //e. clear in it bit of errors and byte number //r. ñáðîñèòü â íåì ïîëÿ îøèáîê è íîìåðà áèòà
igor_v 0:8ad47e2b6f00 335 trm_ena = 1; //e. allow operation of the transmitter of line //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà ëèíèè
igor_v 0:8ad47e2b6f00 336 } // M_Ctl_R
igor_v 0:8ad47e2b6f00 337
igor_v 0:8ad47e2b6f00 338 void M_Ctl_M(void) //r.----------------- modification of the control register of the device ------------ //r.----------------- ìîäèôèêàöèÿ ðåãèñòðà óïðàâëåíèÿ óñòðîéñòâà ------------
igor_v 0:8ad47e2b6f00 339 {
igor_v 0:8ad47e2b6f00 340 uint32_t * ptr;
igor_v 0:8ad47e2b6f00 341 uint32_t bit_numb;
igor_v 0:8ad47e2b6f00 342
igor_v 0:8ad47e2b6f00 343 num_of_par = 2; //e. 2 parameters transfer //r. ïåðåäàâàòü 2 ïàðàìåòðà
igor_v 0:8ad47e2b6f00 344 addr_param[0] = &CMD_Code; //e. the first parameter in answer - returned command code //r. ïåðâûé ïàðàìåòð â îòâåòå - âîçâðàùàåìûé êîä êîìàíäû
igor_v 0:8ad47e2b6f00 345 size_param[0] = 2;
igor_v 0:8ad47e2b6f00 346 size_param[1] = 2; //e. two bytes also have control registers //r. äâà áàéòà èìåþò òàêæå è ðåãèñòðû óïðàâëåíèÿ
igor_v 0:8ad47e2b6f00 347 if ((CMD_Code & (1 << 4)) == 0) //e. is main control register needed? //r. òðåáóåòñÿ îñíîâíîé ðåãèñòð óïðàâëåíèÿ?
igor_v 0:8ad47e2b6f00 348 {
igor_v 0:8ad47e2b6f00 349 ptr = &RgConA; //e. yes //r. äà
igor_v 0:8ad47e2b6f00 350 }
igor_v 0:8ad47e2b6f00 351 else
igor_v 0:8ad47e2b6f00 352 {
igor_v 0:8ad47e2b6f00 353 ptr = &RgConB; //e. otherwise - load the address of the addititonal register //r. èíà÷å - çàãðóçèòü àäðåñ äîïîëíèòåëüíîãî ðåãèñòðà
igor_v 0:8ad47e2b6f00 354 }
igor_v 0:8ad47e2b6f00 355 addr_param[1] = ptr; //e. the second parameter in answer - modified register //r. âòîðîé ïàðàìåòð â îòâåòå - ìîäèôèöèðîâàííûé ðåãèñòð
igor_v 0:8ad47e2b6f00 356
igor_v 0:8ad47e2b6f00 357 bit_numb = CMD_Code & 0x000f; //e. extract the number of the changeable bit //r. âûäåëèòü íîìåð èçìåíÿåìîãî áèòà
igor_v 0:8ad47e2b6f00 358 if ((CMD_Code & (1 << 7)) == 0) // Is clear bit
igor_v 0:8ad47e2b6f00 359 {
igor_v 0:8ad47e2b6f00 360 *ptr &= ~(1 << bit_numb); // yes, clear bit
igor_v 0:8ad47e2b6f00 361 }
igor_v 0:8ad47e2b6f00 362 else
igor_v 0:8ad47e2b6f00 363 {
igor_v 0:8ad47e2b6f00 364 *ptr |= 1 << bit_numb; // no, set bit
igor_v 0:8ad47e2b6f00 365 }
igor_v 0:8ad47e2b6f00 366
igor_v 0:8ad47e2b6f00 367 CMD_Code &= 0xff10; //e. clear in command bit of errors and byte number //r. ñáðîñèòü â êîìàíäå ïîëÿ îøèáîê è íîìåðà áèòà
igor_v 0:8ad47e2b6f00 368 trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. çàïðåòèòü ïåðåäà÷ó ïàðàìåòðà â öèêëå
igor_v 0:8ad47e2b6f00 369 trm_ena = 1; //e. allow operation of the transmitter of line //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà ëèíèè
igor_v 0:8ad47e2b6f00 370 } // M_Ctl_M
igor_v 0:8ad47e2b6f00 371
igor_v 0:8ad47e2b6f00 372 void M_Flg_R(void) //e.------------ reading the register of input flags --------------------------- //r.------------ ÷òåíèå ðåãèñòðà âõîäíûõ ôëàãîâ ---------------------------
igor_v 0:8ad47e2b6f00 373 {
igor_v 0:8ad47e2b6f00 374
igor_v 0:8ad47e2b6f00 375 num_of_par = 1; //e. 1 parameter output //r. âûâîäèòü îäèí ïàðàìåòð
igor_v 0:8ad47e2b6f00 376 addr_param[0] = &In_Flag; //e. the address of the flag register copy //r. àäðåñ êîïèè ðåãèñòðà ôëàãîâ
igor_v 0:8ad47e2b6f00 377 size_param[0] = 2; //e. size of the buffer - 2 bytes //r. ðàçìåð áóôåðà - 2 áàéòà
igor_v 0:8ad47e2b6f00 378 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 379
igor_v 0:8ad47e2b6f00 380 } // M_Flg_R
igor_v 0:8ad47e2b6f00 381
igor_v 0:8ad47e2b6f00 382 void M_Vib_W(void) //r.------------ set the oscillation period of the dither drive ----------------- //r.------------ óñòàíîâêà ïåðèîäà êîëåáàíèé âèáðîïðèâîäà -----------------
igor_v 0:8ad47e2b6f00 383 {
igor_v 0:8ad47e2b6f00 384 ScopeMode = 1; //e. VB_PHASE_DETECTOR allocate a mode of display for a control point of an scope //r. VB_PHASE_DETECTOR íàçíà÷èòü ðåæèì îòîáðàæåíèÿ äëÿ êîíòðîëüíîé òî÷êè îñöèëëîãðàôà
igor_v 0:8ad47e2b6f00 385
igor_v 0:8ad47e2b6f00 386 Output.Str.T_Vibro = (rcv_buf[4] << 8) | (rcv_buf[5] & 0xFF); //e. new variable of the period //r. íîâàÿ ïåðåìåííàÿ ïåðèîäà
igor_v 0:8ad47e2b6f00 387 /* sprintf(BuffTemp1, "\n\r F = %d ", Output.Str.T_Vibro);
igor_v 0:8ad47e2b6f00 388 SendToBuff(BuffTemp1,15);*/
igor_v 0:8ad47e2b6f00 389 Output.Str.L_Vibro= (rcv_buf[6] << 8) | (rcv_buf[7] & 0xFF); //e. new variable of the pulse width //r. íîâàÿ ïåðåìåííàÿ äëèòåëüíîñòè èìïóëüñîâ
igor_v 0:8ad47e2b6f00 390 /*sprintf(BuffTemp1, "\n\r L = %d ", Output.Str.L_Vibro);
igor_v 0:8ad47e2b6f00 391 SendToBuff(BuffTemp1,15);*/
igor_v 0:8ad47e2b6f00 392 VibroDither_Set(); //e. and output its value to period registers on card //r. âûâåñòè åå çíà÷åíèå â ðåãèñòðû ïåðèîäà íà ïëàòå
igor_v 0:8ad47e2b6f00 393
igor_v 0:8ad47e2b6f00 394 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 395 Mk_Ask1();
igor_v 0:8ad47e2b6f00 396 } // M_Vib_W
igor_v 0:8ad47e2b6f00 397
igor_v 0:8ad47e2b6f00 398 void M_Gph_W(void) //e.------------ set the gain factor of photodetector channels ------------------- //r.------------ óñòàíîâêà óñèëåíèÿ êàíàëîâ ôîòîïðèåìíèêà -------------------
igor_v 0:8ad47e2b6f00 399 {
igor_v 0:8ad47e2b6f00 400 Device_blk.Str.Gain_Ph_A = rcv_buf[4]; //e. read from the receiver buffer the value of the gain factor of the A channel //r. ñ÷èòàòü èç áóôåðà ïðèåìíèêà çíà÷åíèå óñèëåíèÿ êàíàëà À
igor_v 0:8ad47e2b6f00 401 Device_blk.Str.Gain_Ph_B = rcv_buf[5]; //e. read from the receiver buffer the value of the gain factor of the B channel //r. ñ÷èòàòü èç áóôåðà ïðèåìíèêà çíà÷åíèå óñèëåíèÿ êàíàëà Â
igor_v 0:8ad47e2b6f00 402
igor_v 0:8ad47e2b6f00 403 Out_G_photo(Device_blk.Str.Gain_Ph_A, Device_blk.Str.Gain_Ph_B); //e. display these values to digital potentiometers //r. âûâåñòè ýòè çíà÷åíèÿ â öèôðîâûå ïîòåíöèîìåòðû
igor_v 0:8ad47e2b6f00 404
igor_v 0:8ad47e2b6f00 405 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 406 Mk_Ask1();
igor_v 0:8ad47e2b6f00 407 } // M_Gph_W
igor_v 0:8ad47e2b6f00 408
igor_v 0:8ad47e2b6f00 409 void M_Rate(void) //e.------------ start of transfer of the M_Rate parameters stack ------------------- //r.------------ çàïóñê ïåðåäà÷è íàáîðà ïàðàìåòðîâ M_Rate -------------------
igor_v 0:8ad47e2b6f00 410 {
igor_v 0:8ad47e2b6f00 411 uint8_t mode;
igor_v 0:8ad47e2b6f00 412
igor_v 0:8ad47e2b6f00 413 SetSpeedPeriod(); //e. set the answer transfer rate and its periodicity //r. óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü
igor_v 0:8ad47e2b6f00 414 UART_SwitchSpeed(trm_rate);
igor_v 0:8ad47e2b6f00 415
igor_v 0:8ad47e2b6f00 416 mode = rcv_buf[3] & 0x001f; //e. extract number of the parameters stack in the command //r. âûäåëèòü íîìåð íàáîðà ïàðàìåòðîâ â êîìàíäå
igor_v 0:8ad47e2b6f00 417
igor_v 0:8ad47e2b6f00 418 switch (mode) {
igor_v 0:8ad47e2b6f00 419 case 1: //e. it is the Rate stack //r. ýòî íàáîð Rate
igor_v 0:8ad47e2b6f00 420 RgConB = RATE_REPER_OR_REFMEANDR; //e. counter latch every vibro period
igor_v 0:8ad47e2b6f00 421 SwitchRefMeandInt(RATE_REPER_OR_REFMEANDR); //e. enable reference meander interrupt
igor_v 0:8ad47e2b6f00 422
igor_v 0:8ad47e2b6f00 423 wrk_period = 12500000; //e. load needed length of working period 1 ñ.//r. çàãðóçèòü òðåáóåìóþ äëèòåëüíîñòü ðàáî÷åãî ïåðèîäà 1 ñ.
igor_v 0:8ad47e2b6f00 424 num_of_par = 14; //e. 9 parameters or groups of parameters output //r. âûâîäèòü 9 ïàðàìåòðîâ èëè ãðóïï ïàðàìåòðîâ
igor_v 0:8ad47e2b6f00 425
igor_v 0:8ad47e2b6f00 426 Valid_Data = 0; // reset all bits of status word
igor_v 0:8ad47e2b6f00 427
igor_v 0:8ad47e2b6f00 428 addr_param[0] = &(Output.Str.Cnt_Pls); //e. set the address of the 1st parameter in the 1st group //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà â 1-îé ãðóïïå
igor_v 0:8ad47e2b6f00 429 addr_param[1] = &(Output.Str.Cnt_Mns); //e. set the address of the 1st parameter in the 2nd group //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà â 2-îé ãðóïïå
igor_v 0:8ad47e2b6f00 430 addr_param[2] = &(Output.Str.Cnt_Dif); //e. set the address of the 1st parameter in the 3rd group //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà â 3-îé ãðóïïå
igor_v 0:8ad47e2b6f00 431 addr_param[3] = &(Output.Str.F_ras); //e. set the address of the _F_ras parameter in the 4th group //r. çàäàòü àäðåñ ïàðàìåòðà _F_ras âî 4-îé ãðóïïå
igor_v 0:8ad47e2b6f00 432 addr_param[4] = &(Output.Str.HF_reg); //e. set the address of the _HF_reg parameter in the 5th group //r. çàäàòü àäðåñ ïàðàìåòðà _HF_reg â 5-åé ãðóïïå
igor_v 0:8ad47e2b6f00 433 addr_param[5] = &(Output.Str.HF_dif); //e. set the address of the _HF_dif parameter in the 6th group //r. çàäàòü àäðåñ ïàðàìåòðà _HF_dif â 6-îé ãðóïïå
igor_v 0:8ad47e2b6f00 434 addr_param[6] = &(Output.Str.T_Vibro); //e. parameter _T_Vibro //r. ïàðàìåòð _T_Vibro
igor_v 0:8ad47e2b6f00 435 addr_param[7] = &(Output.Str.T_VB_pll); //e. parameter _T_VB_pll //r.ïàðàìåòðâ _T_VB_pll
igor_v 0:8ad47e2b6f00 436 addr_param[8] = &(Output.Str.L_Vibro); //e. parameter _L_Vibro //r. ïàðàìåòð _L_Vibro
igor_v 0:8ad47e2b6f00 437 addr_param[9] = &(Input.StrIn.HF_out); //e. set the address of the _RI_reg parameter in the 8th group //r. çàäàòü àäðåñ ïàðàìåòðà _RI_reg â 8-îé ãðóïïå
igor_v 0:8ad47e2b6f00 438 addr_param[10] = &(Output.Str.WP_reg); //e. parameters: _WP_reg, _WP_pll //r. ïàðàìåòðîâ _WP_reg, _WP_pll
igor_v 0:8ad47e2b6f00 439 addr_param[11] = &(Output.Str.WP_pll); //e. parameters: _WP_reg, _WP_pll //r. ïàðàìåòðîâ _WP_reg, _WP_pll
igor_v 0:8ad47e2b6f00 440 addr_param[12] = &(Output.Str.Tmp_Out); //e. set the address of the temperature sensors array //r. çàäàòü àäðåñ ìàññèâà äàò÷èêîâ òåìïåðàòóðû
igor_v 0:8ad47e2b6f00 441 addr_param[13] = &(Output.Str.WP_scope1); //e. reserved //r. çàðåçåðâèðîâàíî äëÿ äàëüíåéøèõ ïðèìåíåíèé
igor_v 0:8ad47e2b6f00 442
igor_v 0:8ad47e2b6f00 443 size_param[0] = 2; //e. groups 1-6, 8-10 consists of one parameter ... //r. ãðóïïû 1-6, 8-10 ñîäåðæàò ïî îäíîìó ïàðàìåòðó
igor_v 0:8ad47e2b6f00 444 size_param[1] = 2; //e. and have 2 bytes length each //r. è èìåþò äëèíó 2 áàéòà êàæäàÿ
igor_v 0:8ad47e2b6f00 445 size_param[2] = 2;
igor_v 0:8ad47e2b6f00 446 size_param[3] = 2;
igor_v 0:8ad47e2b6f00 447 size_param[4] = 2;
igor_v 0:8ad47e2b6f00 448 size_param[5] = 2;
igor_v 0:8ad47e2b6f00 449 size_param[6] = 2;
igor_v 0:8ad47e2b6f00 450 size_param[7] = 2;
igor_v 0:8ad47e2b6f00 451 size_param[8] = 2;
igor_v 0:8ad47e2b6f00 452 size_param[9] = 2;
igor_v 0:8ad47e2b6f00 453 size_param[10] = 2;
igor_v 0:8ad47e2b6f00 454 size_param[11] = 2;
igor_v 0:8ad47e2b6f00 455
igor_v 0:8ad47e2b6f00 456 size_param[13] = 4; //e. the 11th group parameters has length of 4 bytes //r. 11-z ãðóïïà ïàðàìåòðîâ èìååò äëèíó 4 áàéòà
igor_v 0:8ad47e2b6f00 457
igor_v 0:8ad47e2b6f00 458 size_param[12] = 12; //e. format o the GLD array of temperatures - 12 bytes //r. ôîðìàò ìàññèâà òåìïåðàòóð ÃËÄ - 12 áàéò
igor_v 0:8ad47e2b6f00 459
igor_v 0:8ad47e2b6f00 460 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 461 break;
igor_v 0:8ad47e2b6f00 462
igor_v 0:8ad47e2b6f00 463 case 2: //e. it is the Rate2 stack //r. ýòî íàáîð Rate2
igor_v 0:8ad47e2b6f00 464 RgConB = RATE_REPER_OR_REFMEANDR;
igor_v 0:8ad47e2b6f00 465 SwitchRefMeandInt(RATE_REPER_OR_REFMEANDR); //e. enable interrupt from ref. meander
igor_v 0:8ad47e2b6f00 466 wrk_period = 0; //e. frequency of output = fvibro //r. ÷àñòîòà âûâîäà ðàâíà ÷àñòîòå ÂÏ
igor_v 0:8ad47e2b6f00 467
igor_v 0:8ad47e2b6f00 468 num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü 2 ïàðàìåòðà
igor_v 0:8ad47e2b6f00 469
igor_v 0:8ad47e2b6f00 470 addr_param[0] = &(Output.Str.Cnt_Pls); //e. set the first parameter address //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà
igor_v 0:8ad47e2b6f00 471 addr_param[1] = &(Output.Str.Cnt_Mns); //e. and the 2nd //r. è âòîðîãî
igor_v 0:8ad47e2b6f00 472 size_param[0] = 2; //e. parameters has 2 bytes length //r. ïàðàìåòðû èìååò äëèíó 2 áàéòà
igor_v 0:8ad47e2b6f00 473 size_param[1] = 2;
igor_v 0:8ad47e2b6f00 474 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 475 break;
igor_v 0:8ad47e2b6f00 476
igor_v 0:8ad47e2b6f00 477 case 3: //e. it is the Rate3 stack //r. ýòî íàáîð Rate3
igor_v 0:8ad47e2b6f00 478
igor_v 0:8ad47e2b6f00 479 wrk_period = 2500; //e. frequency of output = 10000 Hz //r. n=1, ÷àñòîòà âûâîäà = 10000 Hz
igor_v 0:8ad47e2b6f00 480 num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü 2 ïàðàìåòðà
igor_v 0:8ad47e2b6f00 481
igor_v 0:8ad47e2b6f00 482 addr_param[0] = &(Output.Str.WP_scope1); //e. set the addresses of output parameters //r. çàäàòü àäðåñà âûâîäèìûõ ïàðàìåòðîâ
igor_v 0:8ad47e2b6f00 483 addr_param[1] = &(Output.Str.WP_scope2);
igor_v 0:8ad47e2b6f00 484 size_param[0] = 2; //e. all parameters has 2 bytes length //r. âñå ïàðàìåòðû èìåþò äëèíó 2 áàéòà
igor_v 0:8ad47e2b6f00 485 size_param[1] = 2;
igor_v 0:8ad47e2b6f00 486 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 487 break;
igor_v 0:8ad47e2b6f00 488
igor_v 0:8ad47e2b6f00 489 case 4: //e. it is the Rate4 stack //r. ýòî íàáîð Rate4
igor_v 0:8ad47e2b6f00 490 wrk_period = 20000; //e. correspond to output frequency 1.25 kHz //r. ñîîòâåñòâóåò ÷àñòîòå âûâîäà 1.25 kHz
igor_v 0:8ad47e2b6f00 491 num_of_par = 4; //e. 4 parameters output //r. âûâîäèòü 4 ïàðàìåòðà
igor_v 0:8ad47e2b6f00 492
igor_v 0:8ad47e2b6f00 493 //e. set the addresses of output parameters //r. çàäàòü àäðåñà âûâîäèìûõ ïàðàìåòðîâ
igor_v 0:8ad47e2b6f00 494 // --- raw data array of numbers ---
igor_v 0:8ad47e2b6f00 495 // addr_param[0] = &Dif_Curr_Array;
igor_v 0:8ad47e2b6f00 496 // --- filtered array of numbers ---
igor_v 0:8ad47e2b6f00 497 // addr_param[1] = &Dif_Filt_Array;
igor_v 0:8ad47e2b6f00 498 // ---------------------------------
igor_v 0:8ad47e2b6f00 499 addr_param[2] = &(Output.Str.HF_reg); //e. HFO regulator //r. íàïðÿæåíèå ÃÂ×
igor_v 0:8ad47e2b6f00 500 addr_param[3] = &(Output.Str.WP_reg); //e. CPLC heater regulator //r. íàïðÿæåíèå íàãðåâàòåëÿ
igor_v 0:8ad47e2b6f00 501 size_param[0] = 16;
igor_v 0:8ad47e2b6f00 502 size_param[1] = 32;
igor_v 0:8ad47e2b6f00 503 size_param[2] = 2;
igor_v 0:8ad47e2b6f00 504 size_param[3] = 2;
igor_v 0:8ad47e2b6f00 505 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 506 break;
igor_v 0:8ad47e2b6f00 507 case 7:
igor_v 0:8ad47e2b6f00 508 wrk_period = 20000; //e. correspond to output frequency 1250 Hz //r. ñîîòâåñòâóåò ÷àñòîòå âûâîäà 1.25 kHz
igor_v 0:8ad47e2b6f00 509 num_of_par = 5; //e. 4 parameters output //r. âûâîäèòü 5 ïàðàìåòðà
igor_v 0:8ad47e2b6f00 510
igor_v 0:8ad47e2b6f00 511 //e. set the addresses of output parameters //r. çàäàòü àäðåñà âûâîäèìûõ ïàðàìåòðîâ
igor_v 0:8ad47e2b6f00 512 // --- raw data array of PLC phase ---
igor_v 0:8ad47e2b6f00 513 addr_param[0] = &(Output.Str.WP_Phase_Det_Array);
igor_v 0:8ad47e2b6f00 514 // --- filtered array of reference sin---
igor_v 0:8ad47e2b6f00 515 addr_param[1] = &(Output.Str.WP_sin_Array);
igor_v 0:8ad47e2b6f00 516 // ---------------------------------
igor_v 0:8ad47e2b6f00 517 addr_param[2] = &(Output.Str.WP_reg); //e. CPLC heater regulator //r. íàïðÿæåíèå íàãðåâàòåëÿ
igor_v 0:8ad47e2b6f00 518 addr_param[3] = &(Output.Str.WP_pll); //e. CPLC phase //r. ôàçà
igor_v 0:8ad47e2b6f00 519 addr_param[4] = &(Output.Str.HF_reg); //e. set the address of the _HF_reg parameter in the 5th group //r. çàäàòü àäðåñ ïàðàìåòðà _HF_reg â 5-åé ãðóïïå
igor_v 0:8ad47e2b6f00 520 size_param[0] = 16;
igor_v 0:8ad47e2b6f00 521 size_param[1] = 16;
igor_v 0:8ad47e2b6f00 522 size_param[2] = 2;
igor_v 0:8ad47e2b6f00 523 size_param[3] = 2;
igor_v 0:8ad47e2b6f00 524 size_param[4] = 2;
igor_v 0:8ad47e2b6f00 525 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 526 break;
igor_v 0:8ad47e2b6f00 527 }
igor_v 0:8ad47e2b6f00 528 SetIntLatch(wrk_period);
igor_v 0:8ad47e2b6f00 529 } // M_Rate
igor_v 0:8ad47e2b6f00 530
igor_v 0:8ad47e2b6f00 531 void M_Reset(void)
igor_v 0:8ad47e2b6f00 532 {
igor_v 0:8ad47e2b6f00 533 while(1);
igor_v 0:8ad47e2b6f00 534 } // will not achieve
igor_v 0:8ad47e2b6f00 535
igor_v 0:8ad47e2b6f00 536 void M_Param_R(void) //e. ------------ read the parameter of the GLD from the data memory ---------------------- //r.------------ ÷òåíèå ïàðàìåòðà GLD èç ïàìÿòè äàííûõ ----------------------
igor_v 0:8ad47e2b6f00 537 {
igor_v 0:8ad47e2b6f00 538 num_of_par = 1; //e. 1 parameter output //r. âûâîäèòü îäèí ïàðàìåòð
igor_v 0:8ad47e2b6f00 539 addr_param[0] = (void *)(&Device_blk.Str.My_Addres + rcv_buf[3]); //e. address of the needed parameter in the block //r. àäðåñ òðåáóåìîãî ïàðàìåòðà â áëîêå
igor_v 0:8ad47e2b6f00 540 size_param[0] = 2; //e. size of the buffer - 2 bytes //r. ðàçìåð áóôåðà - 2 áàéòà
igor_v 0:8ad47e2b6f00 541
igor_v 0:8ad47e2b6f00 542 trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà
igor_v 0:8ad47e2b6f00 543 } // M_Param_R
igor_v 0:8ad47e2b6f00 544
igor_v 0:8ad47e2b6f00 545 void M_Param_W(void) //e.------------ write the parameter of the GLD from the data memory ----------------------- //r.------------ çàïèñü ïàðàìåòðà GLD â ïàìÿòü äàííûõ -----------------------
igor_v 0:8ad47e2b6f00 546 {
igor_v 0:8ad47e2b6f00 547 int * ptr;
igor_v 0:8ad47e2b6f00 548
igor_v 0:8ad47e2b6f00 549 ScopeMode = 0; //e. VB_DELAY_MEANDER allocate a mode of display for a control point of an scope //r. VB_DELAY_MEANDER íàçíà÷èòü ðåæèì îòîáðàæåíèÿ äëÿ êîíòðîëüíîé òî÷êè îñöèëëîãðàôà
igor_v 0:8ad47e2b6f00 550
igor_v 0:8ad47e2b6f00 551 ptr = (int *)&Device_blk.Str.My_Addres; // pointer to Parameters block
igor_v 0:8ad47e2b6f00 552 ptr += rcv_buf[3]; // calculate offset
igor_v 0:8ad47e2b6f00 553 *ptr = (rcv_buf[4] << 8) | (rcv_buf[5] & 0xFF); // write new parameter value
igor_v 0:8ad47e2b6f00 554
igor_v 0:8ad47e2b6f00 555 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 556 Mk_Ask1();
igor_v 0:8ad47e2b6f00 557 } // M_Param_W
igor_v 0:8ad47e2b6f00 558
igor_v 0:8ad47e2b6f00 559 void M_LdPar_F() //e.============ procedure for load the GLD parameters from the flash-memory =========== //r.============ ïðîöåäóðà çàãðóçêè ïàðàìåòðîâ ÃËÄ èç ôëýø-ïàìÿòè ===========
igor_v 0:8ad47e2b6f00 560 {
igor_v 0:8ad47e2b6f00 561
igor_v 0:8ad47e2b6f00 562 LoadFlashParam(FromFLASH); //e. load the GLD parameters from the flash-memory //r. çàãðóçèòü ïàðàìåòðû ÃËÄ èç ôäýø-ïàìÿòè
igor_v 0:8ad47e2b6f00 563 blt_in_test = ((uint32_t)FIRMWARE_VER << 8) | (Device_blk.Str.Device_SerialNumber & 0x00FF);
igor_v 0:8ad47e2b6f00 564 // Init_software();
igor_v 0:8ad47e2b6f00 565
igor_v 0:8ad47e2b6f00 566 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 567 Mk_Ask1();
igor_v 0:8ad47e2b6f00 568 } // M_LdPar_F
igor_v 0:8ad47e2b6f00 569
igor_v 0:8ad47e2b6f00 570 void M_LdPar_D(void) //e.============ procedure for set parameters of the GLD by default ============ //r.============ ïðîöåäóðà óñòàíîâêè ïàðàìåòðîâ ÃËÄ ïî óìîë÷àíèþ ============
igor_v 0:8ad47e2b6f00 571 {
igor_v 0:8ad47e2b6f00 572 #if !defined COMMAND_DEBUG
igor_v 0:8ad47e2b6f00 573 LoadFlashParam(ByDefault); //e. define parameters of the GLD by default //r. îïðåäåëèòü ïàðàìåòðû ÃËÄ ïî óìîë÷àíèþ (default)
igor_v 0:8ad47e2b6f00 574 Init_software();
igor_v 0:8ad47e2b6f00 575 #endif
igor_v 0:8ad47e2b6f00 576 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 577 Mk_Ask1();
igor_v 0:8ad47e2b6f00 578 } // M_LdPar_D
igor_v 0:8ad47e2b6f00 579
igor_v 0:8ad47e2b6f00 580 void M_Start(void) //e.============ initialization of the GLD switch on ================================= //r.============ èíèöèàëèçàöèÿ çàïóñêà ÃËÄ =================================
igor_v 0:8ad47e2b6f00 581 {
igor_v 0:8ad47e2b6f00 582 start_Rq = 1; //e. set the flag of the GLD switch on request //r. óñòàíîâèòü ôëàã çàïðîñà ñòàðòà ÃËÄ
igor_v 0:8ad47e2b6f00 583 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 584 Mk_Ask1();
igor_v 0:8ad47e2b6f00 585 } // M_Start
igor_v 0:8ad47e2b6f00 586
igor_v 0:8ad47e2b6f00 587 void M_Stop(void) //e.============ initialization of the GLD switch off ============================== //r.============ èíèöèàëèçàöèÿ âûêëþ÷åíèÿ ÃËÄ ==============================
igor_v 0:8ad47e2b6f00 588 {
igor_v 0:8ad47e2b6f00 589 stop_Rq = 1; //e. set the flag of the GLD switch off request //r. óñòàíîâèòü ôëàã çàïðîñà âûêëþ÷åíèÿ ÃËÄ
igor_v 0:8ad47e2b6f00 590 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 591 Mk_Ask1();
igor_v 0:8ad47e2b6f00 592 } // M_Stop
igor_v 0:8ad47e2b6f00 593
igor_v 0:8ad47e2b6f00 594 void M_Pulse(void) //e.============ generetion of the light-up pulse ========================= //r.============ ãåíåðàöèÿ èìïóëüñà çàïóñêà ëàçåðà =========================
igor_v 0:8ad47e2b6f00 595 {
igor_v 0:8ad47e2b6f00 596 pulse_Rq = 1; //e. set the flag of the GLD switch on request //r. óñòàíîâèòü ôëàã çàïðîñà ñòàðòà ÃËÄ
igor_v 0:8ad47e2b6f00 597 trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ
igor_v 0:8ad47e2b6f00 598 Mk_Ask1();
igor_v 0:8ad47e2b6f00 599 } // M_Pulse
igor_v 0:8ad47e2b6f00 600
igor_v 0:8ad47e2b6f00 601 void B_Rate(void) //e. === procedure of device operation in a mode of continuous output of raw data //r. === ïðîöåäóðà ðàáîòû ïðèáîðà â ðåæèìå íåïðåðûâíîé âûäà÷è "ñûðûõ" äàííûõ
igor_v 0:8ad47e2b6f00 602 {
igor_v 0:8ad47e2b6f00 603 } // B_Rate
igor_v 0:8ad47e2b6f00 604
igor_v 0:8ad47e2b6f00 605 void B_Delta(void) //e. === procedure not used //r. === ïðîöåäóðà íå èñïîëüçóåòñÿ
igor_v 0:8ad47e2b6f00 606 {
igor_v 0:8ad47e2b6f00 607 } // B_Delta
igor_v 0:8ad47e2b6f00 608
igor_v 0:8ad47e2b6f00 609 void D_Period_W(void) //e. === set the period of the angle increase output //r. === óñòàíîâêà ïåðèîäà âûäà÷è ïðèðàùåíèÿ óãëà
igor_v 0:8ad47e2b6f00 610 {
igor_v 0:8ad47e2b6f00 611 } // D_Period_W
igor_v 0:8ad47e2b6f00 612
igor_v 0:8ad47e2b6f00 613 // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
igor_v 0:8ad47e2b6f00 614 void exec_CMD(void) //e. === the final decoding and command execution procedure //r. === ïðîöåäóðà îêîí÷àòåëüíîé äåøèôðàöèè è èñïîëíåíèÿ êîìàíäû
igor_v 0:8ad47e2b6f00 615 {
igor_v 0:8ad47e2b6f00 616 uint32_t wcode;
igor_v 0:8ad47e2b6f00 617
igor_v 0:8ad47e2b6f00 618 rx_buf_copy = 1; //e. initialization of the flag of copying of receiving buffer //r. ïðåäóñòàíîâ ôëàãà êîïèðîâàíèÿ ïðèåìíîãî áóôåðà
igor_v 0:8ad47e2b6f00 619
igor_v 0:8ad47e2b6f00 620 wcode = (rcv_buf[2] & 0xFF) << 8;
igor_v 0:8ad47e2b6f00 621 CMD_Code = wcode | (rcv_buf[3] & 0xFF); //e. save it in the memory for echo-transmission //r. ñîõðàíèòü åãî â ïàìÿòè äëÿ îáðàòíîé ïåðåäà÷è
igor_v 0:8ad47e2b6f00 622
igor_v 0:8ad47e2b6f00 623 if (wcode == CMD_RATE) //e. is it Rate command? //r. ýòî êîìàíäà Rate?
igor_v 0:8ad47e2b6f00 624 {
igor_v 0:8ad47e2b6f00 625 B_Rate();
igor_v 0:8ad47e2b6f00 626 return;
igor_v 0:8ad47e2b6f00 627 }
igor_v 0:8ad47e2b6f00 628 else if (wcode == CMD_DEV_MODE) //e. is it the Device_Mode command? //r. ýòî êîìàíäà óñòàíîâêè ðåæèìà ïðèáîðà?
igor_v 0:8ad47e2b6f00 629 {
igor_v 0:8ad47e2b6f00 630 CMD_Mode = 3;
igor_v 0:8ad47e2b6f00 631 B_Dev_Mode();
igor_v 0:8ad47e2b6f00 632 return;
igor_v 0:8ad47e2b6f00 633 }
igor_v 0:8ad47e2b6f00 634 else if (wcode == CMD_DELTA_BINS) //e. is it the B_DeltaBINS command (command of request for data transfer to the navigation system)? //r. ýòî êîìàíäà çàïðîñà ïåðåäà÷è äàííûõ â íàâèã.ñèñòåìó?
igor_v 0:8ad47e2b6f00 635 {
igor_v 0:8ad47e2b6f00 636 RgConB = RATE_VIBRO_1; //e. set in the additional register of device control the mode of work with dither counters and the filter of moving average //r. óñòàíàâëèâàåì â äîïîëíèòåëüíîì ðåãèñòðå óïðàâëåíèÿ ðåæèì ðàáîòû ñ âèáðîñ÷åò÷èêàìè è ôèëüòðîì ñêîëüçÿùåãî ñðåäíåãî
igor_v 0:8ad47e2b6f00 637 SetSpeedPeriod();
igor_v 0:8ad47e2b6f00 638 UART_SwitchSpeed(trm_rate);
igor_v 0:8ad47e2b6f00 639 CMD_Mode = 4;
igor_v 0:8ad47e2b6f00 640 B_Delta_BINS();
igor_v 0:8ad47e2b6f00 641 return;
igor_v 0:8ad47e2b6f00 642 }
igor_v 0:8ad47e2b6f00 643 else if (wcode == CMD_DELTA_PS) //e. is it the B_DeltaPS command (command of request for data transfer to the uPC)? //r. ýòî êîìàíäà çàïðîñà ïåðåäà÷è äàííûõ â MkPC?
igor_v 0:8ad47e2b6f00 644 {
igor_v 0:8ad47e2b6f00 645 SetSpeedPeriod(); //e. and set the answer transfer rate and its periodicity //r. è óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü (_trm_cycl)
igor_v 0:8ad47e2b6f00 646 UART_SwitchSpeed(trm_rate);
igor_v 0:8ad47e2b6f00 647 if (Device_Mode < 4) //e. work with internal latch
igor_v 0:8ad47e2b6f00 648 Device_Mode = DM_INT_LATCH_DELTA_PS;
igor_v 0:8ad47e2b6f00 649 else
igor_v 0:8ad47e2b6f00 650 Device_Mode = DM_EXT_LATCH_DELTA_PS_PULSE;
igor_v 0:8ad47e2b6f00 651 CMD_Mode = 1;
igor_v 0:8ad47e2b6f00 652 // B_Delta_PS();
igor_v 0:8ad47e2b6f00 653 return;
igor_v 0:8ad47e2b6f00 654 }
igor_v 0:8ad47e2b6f00 655 else if (wcode == CMD_DELTA_SF) // is it the B_DeltaSF command?
igor_v 0:8ad47e2b6f00 656 {
igor_v 0:8ad47e2b6f00 657 SetSpeedPeriod(); //e. and set the answer transfer rate and its periodicity //r. è óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü (_trm_cycl)
igor_v 0:8ad47e2b6f00 658 CMD_Mode = 7;
igor_v 0:8ad47e2b6f00 659 if ((rcv_buf[3] & 0x0001) != 0) //e.reset of accumulated number is disabled //r. ñáðîñ íàêîïëåííîãî ìåæäó çàùåëêàìè ÷èñëà çàïðåùåí
igor_v 0:8ad47e2b6f00 660 Ext_Latch_ResetEnable = 0;
igor_v 0:8ad47e2b6f00 661 else
igor_v 0:8ad47e2b6f00 662 Ext_Latch_ResetEnable = 1;
igor_v 0:8ad47e2b6f00 663 B_Delta_SF();
igor_v 0:8ad47e2b6f00 664 return;
igor_v 0:8ad47e2b6f00 665 }
igor_v 0:8ad47e2b6f00 666 else if (wcode == CMD_BIT_MODE) //e. is this the BIT mode command? //r. ýòî êîìàíäà òåñòèðîâàíèÿ?
igor_v 0:8ad47e2b6f00 667 {
igor_v 0:8ad47e2b6f00 668 CMD_Mode = 6; //e. set the value of the Delta mode//r. óñòàíîâèòü çíà÷åíèå ðåæèìà Delta
igor_v 0:8ad47e2b6f00 669 B_BIT_Mode();
igor_v 0:8ad47e2b6f00 670 return;
igor_v 0:8ad47e2b6f00 671 }
igor_v 0:8ad47e2b6f00 672 else if (wcode == CMD_DELTA) //e. is this the B_Delta command? //r. ýòî êîìàíäà B_Delta?
igor_v 0:8ad47e2b6f00 673 {
igor_v 0:8ad47e2b6f00 674 CMD_Mode = 2; //e. set the value of the Delta mode//r. óñòàíîâèòü çíà÷åíèå ðåæèìà Delta
igor_v 0:8ad47e2b6f00 675 B_Delta(); //e. output calculated value of angle increase //r. âûâîäèòü âû÷èñëåííîå çíà÷åíèå ïðèðàùåíèÿ óãëà
igor_v 0:8ad47e2b6f00 676 return;
igor_v 0:8ad47e2b6f00 677 }
igor_v 0:8ad47e2b6f00 678 else if (CMD_Code == CMD_MAINT) //e. is this the Maintenance mode command? //r. ýòî êîìàíäà Maintenance mode?
igor_v 0:8ad47e2b6f00 679 {
igor_v 0:8ad47e2b6f00 680 if (!RgConB)
igor_v 0:8ad47e2b6f00 681 {
igor_v 0:8ad47e2b6f00 682 RgConB = RATE_VIBRO_1;
igor_v 0:8ad47e2b6f00 683 SwitchRefMeandInt(RATE_VIBRO_1); //e. disable interrupt from referense meander
igor_v 0:8ad47e2b6f00 684 }
igor_v 0:8ad47e2b6f00 685 CMD_Mode = 5; //e. yes, switch on present mode //r. äà, âêëþ÷èòü äàííûé ðåæèì
igor_v 0:8ad47e2b6f00 686 M_Status(); //e. output the status stack of registers //r. âûâåñòè ñòàòóñíûé íàáîð ðåãèñòðîâ
igor_v 0:8ad47e2b6f00 687 if (Device_Mode != DM_INT_10KHZ_LATCH) //e. mode of internal latch 10 kHz //r. ðåæèì âíóòðåííåé çàùåëêè 10 êÃö
igor_v 0:8ad47e2b6f00 688 {
igor_v 0:8ad47e2b6f00 689 Device_Mode = DM_INT_10KHZ_LATCH;
igor_v 0:8ad47e2b6f00 690 trm_ena = 0;
igor_v 0:8ad47e2b6f00 691 }
igor_v 0:8ad47e2b6f00 692 else
igor_v 0:8ad47e2b6f00 693 UART_SwitchSpeed(trm_rate);
igor_v 0:8ad47e2b6f00 694 return;
igor_v 0:8ad47e2b6f00 695 }
igor_v 0:8ad47e2b6f00 696 else if (wcode == SUBCMD_M_RESET) //e. is this subcommand for modification of the device control register? //r. ýòî ïîäêîìàíäà ìîäèôèêàöèè ðåãèñòðà óïðàâëåíèÿ ó-âà?
igor_v 0:8ad47e2b6f00 697 {
igor_v 0:8ad47e2b6f00 698 // Mk_AskDev();
igor_v 0:8ad47e2b6f00 699 M_Reset();
igor_v 0:8ad47e2b6f00 700 return;
igor_v 0:8ad47e2b6f00 701 }
igor_v 0:8ad47e2b6f00 702 else // subcommand analyse
igor_v 0:8ad47e2b6f00 703 {
igor_v 0:8ad47e2b6f00 704 if (CMD_Mode == 2) //e. is this the 2(Delta) mode? //r. ýòî ðåæèì 2? (Delta)
igor_v 0:8ad47e2b6f00 705 {
igor_v 0:8ad47e2b6f00 706 if (CMD_Code == CMD_D_PERIOD_W) //e. the Delta mode, check the subcommand ... //r. ðåæèì DElta, ïðîâåðèòü ïîäêîìàíäó çàãðóçêè ïåðèîäà
igor_v 0:8ad47e2b6f00 707 {
igor_v 0:8ad47e2b6f00 708 D_Period_W(); //e. otherwise - set the data transfer period //r. èíà÷å óñòàíîâèòèü ïåðèîä âûäà÷è äàííûõ
igor_v 0:8ad47e2b6f00 709 return;
igor_v 0:8ad47e2b6f00 710 }
igor_v 0:8ad47e2b6f00 711 else
igor_v 0:8ad47e2b6f00 712 {
igor_v 0:8ad47e2b6f00 713 line_sts = line_sts | CODE_ERR; // invalid command code
igor_v 0:8ad47e2b6f00 714 return;
igor_v 0:8ad47e2b6f00 715 }
igor_v 0:8ad47e2b6f00 716 }
igor_v 0:8ad47e2b6f00 717 else if (CMD_Mode == 5) //e. check the 5 mode (Maintenance) //r. ïðîâåðêà ðåæèìà 5 (Maintenance)
igor_v 0:8ad47e2b6f00 718 {
igor_v 0:8ad47e2b6f00 719 if (CMD_Code == SUBCMD_M_CLEAR) //e. is this subcommand of cleaning of the error register? //r. ýòî ïîäêîìàíäà î÷èñòêè ðåãèñòðà îøèáîê ëèíèè?
igor_v 0:8ad47e2b6f00 720 {
igor_v 0:8ad47e2b6f00 721 M_Clear(); //e. yes, cleaning the error register //r. äà, î÷èñòêà ðåãèñòðà îøèáîê
igor_v 0:8ad47e2b6f00 722 M_Status(); //e. preparing for trabsfer of the device status //r. ïîäãîòîâêà ïåðåäà÷è ñòàòóñà óñòðîéñòâà
igor_v 0:8ad47e2b6f00 723 UART_SwitchSpeed(trm_rate);
igor_v 0:8ad47e2b6f00 724 return;
igor_v 0:8ad47e2b6f00 725 }
igor_v 0:8ad47e2b6f00 726 else if (CMD_Code == SUBCMD_M_MIRR) //e. is this subcommand of return of previous command? //r. ýòî ïîäêîìàíäà âîçâðàòà ïðåäûäóùåé êîìàíäû?
igor_v 0:8ad47e2b6f00 727 {
igor_v 0:8ad47e2b6f00 728 rx_buf_copy = 0; //e. yes, forbid copying of command on saving previous //r. äà, çàïðåòèòü êîïèðîâàíèå êîìàíäû äëÿ ñîõðàíåíèÿ ïðåäûäóùåé
igor_v 0:8ad47e2b6f00 729 M_Mirror(); //e. prepare transfer of the receiving buffer copy //r. ïîäãîòîâèòü ïåðåäà÷ó êîïèè ïðèåìíîãî áóôåðà
igor_v 0:8ad47e2b6f00 730 return;
igor_v 0:8ad47e2b6f00 731 }
igor_v 0:8ad47e2b6f00 732 /* else if (wcode == SUBCMD_M_TMP_W) //e. is this subcommand for writing instructions to the AD7714? //r. ýòî ïîäêîìàíäà çàïèñè èíñòðóêöèé â AD7714?
igor_v 0:8ad47e2b6f00 733 {
igor_v 0:8ad47e2b6f00 734 // M_Tmp_W(); //e. yes, procedure call of write of the command //r. äà, âûçîâ ïðîöåäóðû çàïèñè êîìàíäû
igor_v 0:8ad47e2b6f00 735 return;
igor_v 0:8ad47e2b6f00 736 } */
igor_v 0:8ad47e2b6f00 737 else if (wcode == SUBCMD_M_TMP_R) //e. is this subcommand for data read from the AD7714? //r. ýòî ïîäêîìàíäà ÷òåíèÿ äàííûõ èç AD7714?
igor_v 0:8ad47e2b6f00 738 {
igor_v 0:8ad47e2b6f00 739 M_Tmp_R(); //r. yes, call the procedure for data read //e. äà, âûçîâ ïðîöåäóðû ÷òåíèÿ äàííûõ
igor_v 0:8ad47e2b6f00 740 return;
igor_v 0:8ad47e2b6f00 741 }
igor_v 0:8ad47e2b6f00 742 /* else if (wcode == SUBCMD_M_E5R_W) //e. is this subcommand for write to the mode register? //r. ýòî ïîäêîìàíäà çàïèñè â ðåãèñòð ðåæèìà?
igor_v 0:8ad47e2b6f00 743 {
igor_v 0:8ad47e2b6f00 744 M_e5r_W(); //e. yes, write data to the mode register of the Elio5 card //r. äà, çàïèñàòü äàííûå â ðåãèñòð ðåæèìà ïëàòû Elio5
igor_v 0:8ad47e2b6f00 745 return;
igor_v 0:8ad47e2b6f00 746 }
igor_v 0:8ad47e2b6f00 747 else if (wcode == SUBCMD_M_E5RA_W) //e. is this subcommand for write to the mode register? //r. ýòî ïîäêîìàíäà çàïèñè â ðåãèñòð ðåæèìà?
igor_v 0:8ad47e2b6f00 748 {
igor_v 0:8ad47e2b6f00 749 M_e5rA_W(); //e. yes, write data to the mode register of the Elio5 card //r. äà, çàïèñàòü äàííûå â ðåãèñòð ðåæèìà ïëàòû Elio5
igor_v 0:8ad47e2b6f00 750 return;
igor_v 0:8ad47e2b6f00 751 } */
igor_v 0:8ad47e2b6f00 752 else if (wcode == SUBCMD_M_ADC_R) //e. is t the subcommand for data read from ADCs ADS1250 and ADS8321 ? //r. ýòî ïîäêîìàíäà ÷òåíèÿ äàííûõ èç ÀÖÏ ADS1250 è ADS8321?
igor_v 0:8ad47e2b6f00 753 {
igor_v 0:8ad47e2b6f00 754 M_ADC_R(); //e. read of ADC channels //r. ÷òåíèå êàíàëîâ ÀÖÏ
igor_v 0:8ad47e2b6f00 755 return;
igor_v 0:8ad47e2b6f00 756 }
igor_v 0:8ad47e2b6f00 757 else if (wcode == SUBCMD_M_CNT_R) //e. is this subcommand of data read from pulse counters? //r. ýòî ïîäêîìàíäà ÷òåíèÿ äàííûõ èç ñ÷åò÷èêîâ èìïóëüñîâ?
igor_v 0:8ad47e2b6f00 758 {
igor_v 0:8ad47e2b6f00 759 M_Cnt_R(); //e. read of counters //r. ÷òåíèå ñ÷åò÷èêîâ
igor_v 0:8ad47e2b6f00 760 return;
igor_v 0:8ad47e2b6f00 761 }
igor_v 0:8ad47e2b6f00 762 else if (wcode == SUBCMD_M_FLG_R) //e. is it the command of data read about input flags? //r. ýòî ïîäêîìàíäà ÷òåíèÿ äàííûõ î âõîäíûõ ôëàãàõ?
igor_v 0:8ad47e2b6f00 763 {
igor_v 0:8ad47e2b6f00 764 M_Flg_R(); //e. read the input flags //r. ÷èòàòü âõîäíûå ôëàãè
igor_v 0:8ad47e2b6f00 765 return;
igor_v 0:8ad47e2b6f00 766 }
igor_v 0:8ad47e2b6f00 767 else if (wcode == SUBCMD_M_VIB_W) //e. is this subcommand for load the dither drive period? //r. ýòî ïîäêîìàíäà çàãðóçêè ïåðèîäà âèáðîïðèâîäà?
igor_v 0:8ad47e2b6f00 768 {
igor_v 0:8ad47e2b6f00 769 M_Vib_W(); //e. set the new value of the period //r. óñòàíîâèòü íîâîå çíà÷åíèå ïåðèîäà
igor_v 0:8ad47e2b6f00 770 return;
igor_v 0:8ad47e2b6f00 771 }
igor_v 0:8ad47e2b6f00 772 else if (wcode == SUBCMD_M_GPH_W) //e. is this subcommand for set the gain factor of photodetector channels? //r. ýòî ïîäêîìàíäà óñòàíîâêè óñèëåíèÿ êàíàëîâ ôîòîïðèåìíèêà ?
igor_v 0:8ad47e2b6f00 773 {
igor_v 0:8ad47e2b6f00 774 M_Gph_W(); //e. set the new values of gain factor //r. óñòàíîâèòü íîâûå çíà÷åíèÿ óñèëåíèÿ
igor_v 0:8ad47e2b6f00 775 return;
igor_v 0:8ad47e2b6f00 776 }
igor_v 0:8ad47e2b6f00 777 else if (wcode == SUBCMD_M_STIMUL) //e. is this subcommand for set the values of the DACs and flags? //r. ýòî ïîäêîìàíäà óñòàíîâêè çíà÷åíèÿ ÖÀÏîâ è ôäàãîâ ?
igor_v 0:8ad47e2b6f00 778 {
igor_v 0:8ad47e2b6f00 779 M_Stimul(); //e. set the new values //r. óñòàíîâèòü íîâûå çíà÷åíèÿ
igor_v 0:8ad47e2b6f00 780 return;
igor_v 0:8ad47e2b6f00 781 }
igor_v 0:8ad47e2b6f00 782 else if (wcode == SUBCMD_M_RATE) //e. is this subcommand for set the M_Rate output stack //r. ýòî ïîäêîìàíäà óñòàíîâêè âûäà÷è íàáîðà M_Rate ?
igor_v 0:8ad47e2b6f00 783 {
igor_v 0:8ad47e2b6f00 784 M_Rate(); //e. switch on the M_Rate data transfer //r. âêëþ÷èòü ïåðåäà÷ó äàííûõ M_Rate
igor_v 0:8ad47e2b6f00 785 return;
igor_v 0:8ad47e2b6f00 786 }
igor_v 0:8ad47e2b6f00 787 else if (wcode == SUBCMD_M_PARAM_W) //e. is this subcommand for write the new value of the GLD parameter ... //r. ýòî ïîäêîìàíäà çàïèñè íîâîãî çíà÷åíèÿ ïàðàìåòðà GLD
igor_v 0:8ad47e2b6f00 788 {
igor_v 0:8ad47e2b6f00 789 M_Param_W(); //e. write the new value of the parameter //r. çàïèñàòü íîâîå çíà÷åíèå ïàðàìåòðà
igor_v 0:8ad47e2b6f00 790 return;
igor_v 0:8ad47e2b6f00 791 }
igor_v 0:8ad47e2b6f00 792 else if (wcode == SUBCMD_M_PARAM_R) //e. is this subcommand for read the value of the GLD parameter? //r. ýòî ïîäêîìàíäà ÷òåíèÿ çíà÷åíèÿ ïàðàìåòðà GLD?
igor_v 0:8ad47e2b6f00 793 {
igor_v 0:8ad47e2b6f00 794 M_Param_R(); //e. read the value from the data memory //r. ñ÷èòàòü çíà÷åíèå ïàðàìåòðà èç ïàìÿòè äàíûõ
igor_v 0:8ad47e2b6f00 795 return;
igor_v 0:8ad47e2b6f00 796 }
igor_v 0:8ad47e2b6f00 797 else if (CMD_Code == SUBCMD_M_LDPAR_F) //e. is this subcommand for load GLD parameters ... //r. ýòî ïîäêîìàíäà çàãðóçêè ïàðàìåòðîâ GLD
igor_v 0:8ad47e2b6f00 798 {
igor_v 0:8ad47e2b6f00 799 M_LdPar_F(); //e. start the loading of parameters //r. çàïóñòèòü çàãðóçêó ïàðàìåòðîâ
igor_v 0:8ad47e2b6f00 800 return;
igor_v 0:8ad47e2b6f00 801 }
igor_v 0:8ad47e2b6f00 802 else if (CMD_Code == SUBCMD_M_LDPAR_D) //e. is this subcommand for direct setting of the GLD parameters ... //r. ýòî ïîäêîìàíäà ïðÿìîãî íàçíà÷åíèÿ ïàðàìåòðîâ GLD
igor_v 0:8ad47e2b6f00 803 {
igor_v 0:8ad47e2b6f00 804 M_LdPar_D(); //e. read the value of the parameter from the data memory //r. ñ÷èòàòü çíà÷åíèå ïàðàìåòðà èç ïàìÿòè äàíûõ
igor_v 0:8ad47e2b6f00 805 return;
igor_v 0:8ad47e2b6f00 806 }
igor_v 0:8ad47e2b6f00 807 else if (CMD_Code == SUBCMD_M_START) //e. is this subcommand for GLD starting? //r. ýòî ïîäêîìàíäà çàïóñêà GLD?
igor_v 0:8ad47e2b6f00 808 {
igor_v 0:8ad47e2b6f00 809 M_Start(); //e. call the procedure of start //r. çàïóñòèòü ïðîöåäóðó ñòàðòà
igor_v 0:8ad47e2b6f00 810 return;
igor_v 0:8ad47e2b6f00 811 }
igor_v 0:8ad47e2b6f00 812 else if (CMD_Code == SUBCMD_M_PULSE) //e. is this subcommand for GLD starting? //r. ýòî ïîäêîìàíäà çàïóñêà GLD?
igor_v 0:8ad47e2b6f00 813 {
igor_v 0:8ad47e2b6f00 814 M_Pulse(); //e. call light-up function //r. âûäàòü èìïóëüñ ïîäæèãà
igor_v 0:8ad47e2b6f00 815 return;
igor_v 0:8ad47e2b6f00 816 }
igor_v 0:8ad47e2b6f00 817 else if (CMD_Code == SUBCMD_M_STOP) //e. is this subcommand for GLD switch off? //r. ýòî ïîäêîìàíäà âûêëþ÷åíèÿ GLD?
igor_v 0:8ad47e2b6f00 818 {
igor_v 0:8ad47e2b6f00 819 M_Stop(); //e. otherwise- switch off all regulators and stop device //r. âûêëþ÷èòü âñå êîíòóðû è îñòàíîâèòü ïðèáîð
igor_v 0:8ad47e2b6f00 820 return;
igor_v 0:8ad47e2b6f00 821 }
igor_v 0:8ad47e2b6f00 822 else if (wcode == SUBCMD_M_CTL_R) //e. is this subcommand for read the device control register? //r. ýòî ïîäêîìàíäà ÷òåíèÿ ðåãèñòðà óïðàâëåíèÿ ó-âà?
igor_v 0:8ad47e2b6f00 823 {
igor_v 0:8ad47e2b6f00 824 M_Ctl_R();
igor_v 0:8ad47e2b6f00 825 return;
igor_v 0:8ad47e2b6f00 826 }
igor_v 0:8ad47e2b6f00 827 else if (wcode == SUBCMD_M_CTL_M) //e. is this subcommand for modification of the device control register? //r. ýòî ïîäêîìàíäà ìîäèôèêàöèè ðåãèñòðà óïðàâëåíèÿ ó-âà?
igor_v 0:8ad47e2b6f00 828 {
igor_v 0:8ad47e2b6f00 829 M_Ctl_M();
igor_v 0:8ad47e2b6f00 830 return;
igor_v 0:8ad47e2b6f00 831 }
igor_v 0:8ad47e2b6f00 832 /* else if (wcode == SUBCMD_M_RESET) //e. is this subcommand for modification of the device control register? //r. ýòî ïîäêîìàíäà ìîäèôèêàöèè ðåãèñòðà óïðàâëåíèÿ ó-âà?
igor_v 0:8ad47e2b6f00 833 {
igor_v 0:8ad47e2b6f00 834 M_Reset();
igor_v 0:8ad47e2b6f00 835 return;
igor_v 0:8ad47e2b6f00 836 }*/
igor_v 0:8ad47e2b6f00 837 else
igor_v 0:8ad47e2b6f00 838 {
igor_v 0:8ad47e2b6f00 839 line_sts = line_sts | MODE_ERR; // mode error
igor_v 0:8ad47e2b6f00 840 return;
igor_v 0:8ad47e2b6f00 841 }
igor_v 0:8ad47e2b6f00 842 }
igor_v 0:8ad47e2b6f00 843 }
igor_v 0:8ad47e2b6f00 844 } // exec_CMD
igor_v 0:8ad47e2b6f00 845
igor_v 0:8ad47e2b6f00 846 void decode_CMD(void)
igor_v 0:8ad47e2b6f00 847 {
igor_v 0:8ad47e2b6f00 848 int size;
igor_v 0:8ad47e2b6f00 849
igor_v 0:8ad47e2b6f00 850 if (!rcv_Rdy) //e. is data in receive buffer? //r. â ïðèåìíîì áóôåðå åñòü èíôîðìàöèÿ?
igor_v 0:8ad47e2b6f00 851 {
igor_v 0:8ad47e2b6f00 852 return; //e. if no, stop processing //r. åñëè íåò, çàêîí÷èòü îáðàáîòêó
igor_v 0:8ad47e2b6f00 853 }
igor_v 0:8ad47e2b6f00 854
igor_v 0:8ad47e2b6f00 855 if (!line_sts) //e. Whether there were errors of receiving of start-bit? //r. áûëè ëè îøèáêè ïðèåìà ñòàðò-áèòà ?
igor_v 0:8ad47e2b6f00 856 {
igor_v 0:8ad47e2b6f00 857 //e. there were not errors of receiving of bytes, check the device address //r. îøèáîê ïðèåìà áàéòîâ íå áûëî, ïðîâåðèòü àäðåñ îáðàùåíèÿ
igor_v 0:8ad47e2b6f00 858 //Is_Brodcast_Req = 0; //e. reset the flag of broadcasting request //r. ñáðîñèòü ôëàã øèðîêîâåùàòåëüíîãî çàïðîñà
igor_v 0:8ad47e2b6f00 859 if (rcv_buf[1] != Device_blk.Str.My_Addres)
igor_v 0:8ad47e2b6f00 860 {
igor_v 0:8ad47e2b6f00 861 if (rcv_buf[1] != BROADCAST_ADDRESS)
igor_v 0:8ad47e2b6f00 862 {
igor_v 0:8ad47e2b6f00 863 goto end;
igor_v 0:8ad47e2b6f00 864 }
igor_v 0:8ad47e2b6f00 865 }
igor_v 0:8ad47e2b6f00 866
igor_v 0:8ad47e2b6f00 867 if (rcv_buf[0] == COMMAND_PREFIX)
igor_v 0:8ad47e2b6f00 868 { //e. there is new command in the receiver buffer, stop the transfer //r. â áóôåðå ïðèåìíèêà åñòü íîâàÿ êîìàíäà, ïðåêðàòèòü ïåðåäà÷ó
igor_v 0:8ad47e2b6f00 869 trm_ena = 0; //e. reset the flag of transmission allowing //r. ñáðîñèòü ôëàã ðàçðåøåíèÿ ïåðåäà÷è
igor_v 0:8ad47e2b6f00 870
igor_v 0:8ad47e2b6f00 871 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
igor_v 0:8ad47e2b6f00 872
igor_v 0:8ad47e2b6f00 873 exec_CMD(); // øåé êîìàíäû
igor_v 0:8ad47e2b6f00 874
igor_v 0:8ad47e2b6f00 875 //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
igor_v 0:8ad47e2b6f00 876
igor_v 0:8ad47e2b6f00 877
igor_v 0:8ad47e2b6f00 878 //e. check up presence of errors in operation of this procedure //r. ïðîâåðèòü, íàëè÷èå îøèáîê â ðàáîòå äàííîé ïîöåäóðû
igor_v 0:8ad47e2b6f00 879 //e. did is the "unknown code of a command" or "parameters were set incorrectly" error? //r. áûëà îøèáêà "íåèçâåñòíûé êîä êîìàíäû" èëè "íåâåðíî çàäàííûå ïàðàìåòðû"?
igor_v 0:8ad47e2b6f00 880 if ( ((line_sts & CODE_ERR) == CODE_ERR) || ((line_sts & PARAM_ERR) == PARAM_ERR) )
igor_v 0:8ad47e2b6f00 881 {
igor_v 0:8ad47e2b6f00 882 line_err = line_sts; //e. set error bits in the error register of the line //r. óñòàíîâèòü áèòû îøèáîê â ðåãèñòðå îøèáîê ëèíèè
igor_v 0:8ad47e2b6f00 883 }
igor_v 0:8ad47e2b6f00 884 }
igor_v 0:8ad47e2b6f00 885 else
igor_v 0:8ad47e2b6f00 886 {
igor_v 0:8ad47e2b6f00 887 line_err = line_sts | NO_CMD_ERR; // äîáàâëåíèå îøèáêè â ðåãèñòð îøèáîê
igor_v 0:8ad47e2b6f00 888 }
igor_v 0:8ad47e2b6f00 889
igor_v 0:8ad47e2b6f00 890 }
igor_v 0:8ad47e2b6f00 891 else
igor_v 0:8ad47e2b6f00 892 {
igor_v 0:8ad47e2b6f00 893 line_err = line_sts;
igor_v 0:8ad47e2b6f00 894 }
igor_v 0:8ad47e2b6f00 895 end:
igor_v 0:8ad47e2b6f00 896 if (rx_buf_copy) //e. is copying of present received packet needed? //r. òðåáóåòñÿ êîïèðîâàíèå äàííîãî ïðèíÿòîãî ïàêåòà?
igor_v 0:8ad47e2b6f00 897 {
igor_v 0:8ad47e2b6f00 898 size = rcv_num_byt;
igor_v 0:8ad47e2b6f00 899 rcv_byt_copy = rcv_num_byt; //e. save the size of copy //r. çàïîìíèòü ðàçìåð êîïèè
igor_v 0:8ad47e2b6f00 900 if (rcv_num_byt > sizeof(rcv_buf)) //e. compare the size of receiving buffer with amount of received bytes //r. êîïèðîâàíèå òðåáóåòñÿ, ñðàâíèòü ðàçìåð ïðèåìíîãî áóôåðà ñ ÷èñëîì ïðèíÿòûõ áàéò
igor_v 0:8ad47e2b6f00 901 {
igor_v 0:8ad47e2b6f00 902 size = sizeof(rcv_buf);
igor_v 0:8ad47e2b6f00 903 }
igor_v 0:8ad47e2b6f00 904 memcpy(rcv_copy, rcv_buf, size); //e. copy of received amount of bytes, but no more than buffer size //r. êîïèðîâàòü ïðèíÿòîå ÷èñëî áàéò, íî íå áîëåå ðàçìåðà áóôåðà
igor_v 0:8ad47e2b6f00 905 }
igor_v 0:8ad47e2b6f00 906 rx_buf_copy = 0; //e. reset the flag of necessity of copying of receiving buffer //r. ñáðîñèòü ôëàã íåîáõîäèìîñòè êîïèðîâàíèÿ ïðèåìíîãî áóôåðà
igor_v 0:8ad47e2b6f00 907
igor_v 0:8ad47e2b6f00 908 do
igor_v 0:8ad47e2b6f00 909 rcv_buf[--rcv_num_byt] = 0;
igor_v 0:8ad47e2b6f00 910 while(rcv_num_byt);
igor_v 0:8ad47e2b6f00 911 rcv_num_byt_old = rcv_num_byt;
igor_v 0:8ad47e2b6f00 912 line_sts = 0; //e. reset the line status register //r. ñáðîñèòü ðåãèñòð ñòàòóñà ëèíèè
igor_v 0:8ad47e2b6f00 913 rcv_Rdy = 0; //e. allow further data reception //r. ðàçðåøèòü äàëüíåéøèé ïðèåì äàííûõ
igor_v 0:8ad47e2b6f00 914 } // decode_CMD
igor_v 0:8ad47e2b6f00 915
igor_v 0:8ad47e2b6f00 916