Diff: main.cpp

Revision:

1:0535928f65ca

Parent:

0:d87e01c5969f

Child:

2:26b2e25d323a

--- a/main.cpp	Thu Jun 04 23:36:46 2015 +0000
+++ b/main.cpp	Mon Jun 08 20:06:56 2015 +0000
@@ -1,17 +1,10 @@
 /*  All modem code Aeris code and have been removed to get the ST Mems sensor board to function initially.
  *  This was done to see if anything was working at all.  Currently the sensors are read every 33 seconds.
  *  This can be changed to a higher speed to capture more interesting events.
- *  The oringinal code worked for a Future FAE training event utilizing a st411 processor and a Multitech
- *  socket modem H5 version.
  */ 
 
-
-
-
-
 /* This is an example program which reads in the 3-axis acceleration, pressure, and temperature data from
- * a sensor board. It then uses an MTSAS SocketModem Shield board to send the read data over
- * a cellular connection to Aeris AerCloud using an MQTT client protocol.
+ * a sensor board. It then uses the Dragonfly board to send the read data over a cellular connection to Aeris AerCloud using an MQTT client protocol.
  */
 
 #include "mbed.h"
@@ -60,23 +53,23 @@
 // const char _APN[] = "aer.aerisapn.net";                                    //  Cellular provider APN address for data services
 // const char _APN[] = "aer05.aerisapn.net";
 
-char _AERCLOUD_API_KEY[] ="_Click_On_KEY_AerCloud_Tab";
-char _AERCLOUD_ACCOUNT_ID[] = "_Company_Number_Top_of_Page";        //  account ID.
-char _AERCLOUD_CONTAINER[] = "_From_Container_Page";                //  new container name
-char _AERCLOUD_DEVICE_ID[] = "_Random_Title";                       //  title with unique identifier, i.e. last 4 digits of IMEI
-char _AERCLOUD_SUBSCRIPTION_ID[] = "_Random_Subscription_ID";          // created at Continer Name then Subscription ID for LongPoll
-
-char _host[] = "mqtt.aercloud.aeris.com";
-int _port = 1883;
+//char _AERCLOUD_API_KEY[] ="_Click_On_KEY_AerCloud_Tab";
+//char _AERCLOUD_ACCOUNT_ID[] = "_Company_Number_Top_of_Page";        //  account ID.
+//char _AERCLOUD_CONTAINER[] = "_From_Container_Page";                //  new container name
+//char _AERCLOUD_DEVICE_ID[] = "_Random_Title";                       //  title with unique identifier, i.e. last 4 digits of IMEI
+//char _AERCLOUD_SUBSCRIPTION_ID[] = "_Random_Subscription_ID";          // created at Continer Name then Subscription ID for LongPoll
+//
+//char _host[] = "mqtt.aercloud.aeris.com";
+//int _port = 1883;
 
 
 #define DATA_INTERVAL 30                                            // delay between samples, could be reduced for quicker response and more data
 
-void callback(char* topic, char* payload, unsigned int len)
-{
-    logInfo("topic: [%s]\r\npayload: [%s]", topic, payload);
-}
-
+//void callback(char* topic, char* payload, unsigned int len)
+//{
+//    logInfo("topic: [%s]\r\npayload: [%s]", topic, payload);
+//}
+//
 DigitalOut myled(PA_0);                 // D3
 //Serial pc(PA_2, PA_3);        // D1-PA_2-SERIAL_TX, D0-PA_3-SERIAL_RX
 volatile float TEMPERATURE_Value_C;
@@ -89,7 +82,7 @@
 
 int main()
 {
-    printf("\r\n\r\nHello FUTURE!\r\n\r\n");
+    printf("\r\n\r\nHello!\r\n\r\n");
     MTSLog::setLogLevel(MTSLog::TRACE_LEVEL);
 
     // for Nucleo boards
@@ -167,9 +160,9 @@
         printf("Temperature:\t\t %f C\r\n", TEMPERATURE_Value_C );
         printf("Pressure:\t\t %f hPa\r\n", PRESSURE_Value);
         printf("Accelerometer (mg):\t X: %d, Y: %d, Z: %d\r\n", ACC_Value.AXIS_X, ACC_Value.AXIS_Y, ACC_Value.AXIS_Z);
-//        pc.printf("Humidity:\t\t %f%%\r\n", HUMIDITY_Value);
-//        pc.printf("Magnetometer (mGauss):\t mX: %d, mY: %d, mZ: %d\r\n", MAG_Value.AXIS_X, MAG_Value.AXIS_Y, MAG_Value.AXIS_Z);
-//        pc.printf("Gyroscope (mdps):\t X: %d, Y: %d, Z: %d\r\n", GYR_Value.AXIS_X, GYR_Value.AXIS_Y, GYR_Value.AXIS_Z);
+//        printf("Humidity:\t\t %f%%\r\n", HUMIDITY_Value);
+//        printf("Magnetometer (mGauss):\t mX: %d, mY: %d, mZ: %d\r\n", MAG_Value.AXIS_X, MAG_Value.AXIS_Y, MAG_Value.AXIS_Z);
+//        printf("Gyroscope (mdps):\t X: %d, Y: %d, Z: %d\r\n", GYR_Value.AXIS_X, GYR_Value.AXIS_Y, GYR_Value.AXIS_Z);
         printf("\r\n");
 
         myled = 1; // LED is ON