Revision 1:452282f5895f, committed 2017-12-10

Comitter:

Aussawin

Date:

Sun Dec 10 06:11:35 2017 +0000

Parent:

0:28f3c9274ea7

Commit message:

test

Changed in this revision

diff -r 28f3c9274ea7 -r 452282f5895f LCD4884.cpp
--- a/LCD4884.cpp	Sat Mar 09 21:07:35 2013 +0000
+++ b/LCD4884.cpp	Sun Dec 10 06:11:35 2017 +0000
@@ -14,18 +14,18 @@
 #include "font_6x8.h"
 #include "font_big.h"
 
-DigitalOut SpiClk(SPI_SCK);    //2- Serial Clock(Master Output)
-DigitalOut SpiMosi(SPI_MOSI);  //3- Master Output,Slave Input
-DigitalOut LcdDC(LCD_DC);      //4- Data/Command(command active low)
-DigitalOut SpiCS(SPI_CS);      //5- Chip Select,Slave Transmit Enable(active low,Master Output)
-DigitalOut LcdRst(LCD_RST);    //6- One Reset button
-PwmOut     LcdBl(LCD_BL);      //7- LCD backlight
+DigitalOut SpiClk(D2);    //2- Serial Clock(Master Output)
+DigitalOut SpiMosi(D3);  //3- Master Output,Slave Input
+DigitalOut LcdDC(D4);      //4- Data/Command(command active low)
+DigitalOut SpiCS(D5);      //5- Chip Select,Slave Transmit Enable(active low,Master Output)
+DigitalOut LcdRst(D6);    //6- One Reset button
+PwmOut     LcdBl(D7);      //7- LCD backlight
 
 LCD4884::LCD4884()
 {};
 
 /******************************************************************/
-void LCD4884::backlight(float dat)
+void LCD4884::backlight(int dat)
 {
     LcdBl = dat;
 }

diff -r 28f3c9274ea7 -r 452282f5895f LCD4884.h
--- a/LCD4884.h	Sat Mar 09 21:07:35 2013 +0000
+++ b/LCD4884.h	Sun Dec 10 06:11:35 2017 +0000
@@ -16,12 +16,12 @@
 #include "mbed.h"
 
 // SPI Interface --- (on arduino Arduino Digital Pin 2,3,4,5,6)
-#define SPI_SCK  PTD4   //Serial Clock(Master Output)
-#define SPI_MOSI PTA12  //Master Output,Slave Input
-#define LCD_DC   PTA4   //Data/Command(command active low)
-#define SPI_CS   PTA5   //Chip Select,Slave Transmit Enable(active low,Master Output)
-#define LCD_RST  PTC8   //One Reset button
-#define LCD_BL   PTC9   //PWM Backlit control (Arduino DIO Pin 7)
+#define SPI_SCK  D2   //Serial Clock(Master Output)
+#define SPI_MOSI D3  //Master Output,Slave Input
+#define LCD_DC   D4   //Data/Command(command active low)
+#define SPI_CS   D5   //Chip Select,Slave Transmit Enable(active low,Master Output)
+#define LCD_RST  D6   //One Reset button
+#define LCD_BL   D7   //PWM Backlit control (Arduino DIO Pin 7)
 
 
 //display mode -- normal / highlight
@@ -41,7 +41,7 @@
     public:
     LCD4884();
     void LCD_init(void);
-    void backlight(float dat);
+    void backlight(int dat);
     void LCD_write_byte(unsigned char dat, unsigned char dat_type);
     void LCD_draw_bmp_pixel(unsigned char X,unsigned char Y,unsigned char *map,unsigned char Pix_x,unsigned char Pix_y);
     void LCD_write_string(unsigned char X,unsigned char Y,char *s, char mode);

diff -r 28f3c9274ea7 -r 452282f5895f main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Dec 10 06:11:35 2017 +0000
@@ -0,0 +1,359 @@
+#include "mbed.h"
+#include "LCD4884.h"
+
+AnalogIn   input(A0);
+LCD4884 show;
+float analong_data; 
+int state_menu =0; 
+
+void menu();
+void menu_status();
+void menu_RFID();
+void menu_pass();
+void menu_register();
+
+int main(){
+    char buttom[10];
+    show.LCD_init();
+        while(1){
+                analong_data = input.read();
+                sprintf(buttom, "%.3f", analong_data);  
+                show.backlight(0);
+                            
+            if(state_menu == 0){      
+                show.LCD_write_string( 36, 0,"<Hello>", MENU_NORMAL);
+                show.LCD_write_string( 0, 0,buttom, MENU_NORMAL);
+                wait(0.2);
+                menu();
+            }else if(state_menu == 1){
+                show.LCD_write_string( 0, 1,buttom, MENU_NORMAL);  wait(0.2);
+                menu_status();
+            }else if(state_menu == 2){
+                show.LCD_write_string( 0, 1,buttom, MENU_NORMAL);  wait(0.2);
+                menu_RFID();
+            }else if(state_menu == 3){
+                show.LCD_write_string( 0, 1,buttom, MENU_NORMAL);  wait(0.2);
+                menu_pass();
+            }else if(state_menu == 4){
+                show.LCD_write_string( 0, 1,buttom, MENU_NORMAL);  wait(0.2);
+                menu_register();
+            }else{
+                show.LCD_clear();
+            }
+        }      
+}
+
+int HL[4]={0,0,0,0};   //MENU_NORMAL 0    //MENU_HIGHLIGHT 1  // ประกาศไว้แบบ globeเพราะถ้าอยู่ใน while(1)มันจะรีเซ็ตทุกครั้ง    
+int count_menu =0;
+float test;
+
+void menu(){
+////////////////////////////5 menu in one function ////////////////////////////////////////
+    if(analong_data>0.98){
+        count_menu -= 1;
+    }else if(analong_data<0.55 && analong_data>0.3){
+       count_menu += 1;
+    }
+    
+    if(count_menu == 1){
+        HL[0] = 1; HL[1] = 0; HL[2] = 0; HL[3] = 0;
+        }
+    if(count_menu == 2){
+        HL[0] = 0; HL[1] = 1; HL[2] = 0; HL[3] = 0;
+        }
+    if(count_menu == 3){
+        HL[0] = 0; HL[1] = 0; HL[2] = 1; HL[3] = 0;
+        }
+    if(count_menu == 4){
+        HL[0] = 0; HL[1] = 0; HL[2] = 0; HL[3] = 1;
+        }
+    if(count_menu ==-1){
+        count_menu = 0;
+    }
+    if(count_menu ==5){
+        count_menu = 4;
+    }
+/////////////////////////////Hightlight //////////////////////////////////////////// 
+    show.LCD_write_string( 0, 2, "1.Status Lock-", HL[0]);
+    show.LCD_write_string( 0, 3, "2.Open by RFID", HL[1]);
+    show.LCD_write_string( 0, 4, "3.Open by pass", HL[2]);
+    show.LCD_write_string( 0, 5, "4.Register", HL[3]);
+    
+//////////////////////////call new function (branch menu)////////////////////////////
+     if(HL[0]==1 ){
+        if(analong_data>0.15 && analong_data<0.3){
+            show.LCD_clear();
+            count_menu = 0;                                //Status
+            state_menu =1;  
+        }
+    }
+     if(HL[1]==1 ){
+        if(analong_data>0.15 && analong_data<0.3){
+            show.LCD_clear();
+            count_menu = 0;                               //Open by RFID
+            state_menu =2;
+        }
+    }
+     if(HL[2]==1 ){
+        if(analong_data>0.15 && analong_data<0.3){
+            show.LCD_clear();
+            count_menu = 0;                               //Open by pass
+            state_menu =3;    
+        }
+    }
+     if(HL[3]==1 ){
+        if(analong_data>0.15 && analong_data<0.3){
+            show.LCD_clear();
+            count_menu = 0;                               //Register
+            state_menu =4;
+        }
+    }   
+}
+
+int h_s=0;
+int h_s1 =0;
+void menu_status(){
+    if(analong_data>0.98){
+        count_menu -= 1;
+    }else if(analong_data<0.55 && analong_data>0.3){
+       count_menu += 1;
+    }
+    
+    if(count_menu == 1){
+         h_s=1;
+        }
+    else if(count_menu == 0){
+         h_s=0;
+   }else{
+         count_menu = 0;
+        }
+    show.LCD_write_string( 0, 0,"Status-Locker", MENU_NORMAL);
+    show.LCD_write_string( 0, 5,"<Back", h_s);
+    
+    if(h_s == 1 ){
+        if(analong_data>0.15 && analong_data<0.3){
+            show.LCD_clear();
+            state_menu =0;
+        }
+    } 
+    
+}
+
+void menu_RFID(){
+    if(analong_data>0.98){
+        count_menu -= 1;
+    }else if(analong_data<0.55 && analong_data>0.3){
+       count_menu += 1;
+    }
+    
+    if(count_menu == 1){
+         h_s=1;
+        }
+    else if(count_menu == 0){
+         h_s=0;
+   }else{
+         count_menu = 0;
+        }
+    show.LCD_write_string( 0, 0,"Open-RFID", MENU_NORMAL);
+    show.LCD_write_string( 0, 5,"<Back", h_s);
+    
+    if(h_s == 1 ){
+        if(analong_data>0.15 && analong_data<0.3){
+            show.LCD_clear();
+            state_menu =0;
+        }
+    }    
+}
+int HL1[6]={0,0,0,0,0,0};   //MENU_NORMAL 0    //MENU_HIGHLIGHT 1  // ประกาศไว้แบบ globeเพราะถ้าอยู่ใน while(1)มันจะรีเซ็ตทุกครั้ง    
+char pass1[2]="0";  char pass2[2]="0"; char pass3[2]="0"; char pass4[2]="0"; char pass5[2]="0"; char pass6[2]="0";
+
+int num1 = 0; int num2 = 0; int num3 = 0; int num4 = 0; int num5 = 0; int num6 = 0;
+
+void menu_pass(){
+    if(analong_data<0.1){
+        count_menu -= 1;
+    }else if(analong_data<0.75 && analong_data>0.70){
+       count_menu += 1;
+    }
+    
+    
+    if(count_menu ==0){
+       HL1[0] = 1; HL1[1] = 0; HL1[2] = 0; HL1[3] = 0; HL1[4] = 0; HL1[5] = 0; 
+       h_s1=0;     h_s =0;
+    }
+   if(count_menu == 1){
+       HL1[0] = 0; HL1[1] = 1; HL1[2] = 0; HL1[3] = 0; HL1[4] = 0; HL1[5] = 0; 
+       h_s1=0;     h_s =0;
+        }
+    if(count_menu == 2){
+       HL1[0] = 0; HL1[1] = 0; HL1[2] = 1; HL1[3] = 0; HL1[4] = 0; HL1[5] = 0; 
+       h_s1=0;     h_s =0;
+        }
+    if(count_menu == 3){
+       HL1[0] = 0; HL1[1] = 0; HL1[2] = 0; HL1[3] = 1; HL1[4] = 0; HL1[5] = 0; 
+       h_s1=0;     h_s =0;
+        }
+    if(count_menu == 4){
+       HL1[0] = 0; HL1[1] = 0; HL1[2] = 0; HL1[3] = 0; HL1[4] = 1; HL1[5] = 0; 
+       h_s1=0;     h_s =0;
+
+        }
+    if(count_menu == 5){
+       HL1[0] = 0; HL1[1] = 0; HL1[2] = 0; HL1[3] = 0; HL1[4] = 0; HL1[5] = 1;      
+       h_s1=0;     h_s =0;
+        }
+    if(count_menu ==6){
+       HL1[0] = 0; HL1[1] = 0; HL1[2] = 0; HL1[3] = 0; HL1[4] = 0; HL1[5] = 0; 
+       h_s1=1;     h_s =0;
+        }
+     if(count_menu ==7){
+       HL1[0] = 0; HL1[1] = 0; HL1[2] = 0; HL1[3] = 0; HL1[4] = 0; HL1[5] = 0; 
+       h_s1=0;     h_s =1;
+        }       
+    if(count_menu ==-1){
+        count_menu = 0;
+    }
+    if(count_menu ==8){
+        count_menu = 7;
+    }
+    
+    if(HL1[0]==1){
+    if(analong_data>0.98){
+        num1 -= 1;
+    }else if(analong_data<0.55 && analong_data>0.3){
+       num1 += 1;
+    }
+    if(num1 == -1){
+         num1 =9;
+    }
+    if(num1 == 10){
+         num1 =0;
+    }
+        sprintf(pass1, "%d", num1);      
+    }
+    
+    if(HL1[1]==1){
+    if(analong_data>0.98){
+        num2 -= 1;
+    }else if(analong_data<0.55 && analong_data>0.3){
+       num2 += 1;
+    }
+    if(num2 == -1){
+         num2 =9;
+    }
+    if(num2 == 10){
+         num2 =0;
+    }
+        sprintf(pass2, "%d", num2);      
+    }
+    
+    if(HL1[2]==1){
+    if(analong_data>0.98){
+        num3 -= 1;
+    }else if(analong_data<0.55 && analong_data>0.3){
+       num3 += 1;
+    }
+    if(num3 == -1){
+         num3 =9;
+    }
+    if(num3 == 10){
+         num3 =0;
+    }
+        sprintf(pass3, "%d", num3);      
+    }
+    
+    if(HL1[3]==1){
+    if(analong_data>0.98){
+        num4 -= 1;
+    }else if(analong_data<0.55 && analong_data>0.3){
+       num4 += 1;
+    }
+    if(num4 == -1){
+         num4 =9;
+    }
+    if(num4 == 10){
+         num4 =0;
+    }
+        sprintf(pass4, "%d", num4);      
+    }
+    
+    if(HL1[4]==1){
+    if(analong_data>0.98){
+        num5 -= 1;
+    }else if(analong_data<0.55 && analong_data>0.3){
+       num5 += 1;
+    }
+    if(num5 == -1){
+         num5 =9;
+    }
+    if(num5 == 10){
+         num5 =0;
+    }
+        sprintf(pass5, "%d", num5);      
+    }
+    
+    if(HL1[5]==1){
+    if(analong_data>0.98){
+        num6 -= 1;
+    }else if(analong_data<0.55 && analong_data>0.3){
+       num6 += 1;
+    }
+    if(num6 == -1){
+         num6 =9;
+    }
+    if(num6 == 10){
+         num6 =0;
+    }
+        sprintf(pass6, "%d", num6);      
+    }
+////////////////////////////////check with another nucleo/////////////////////////////////////////////    
+    show.LCD_write_string( 0, 0,"Open-Password", MENU_NORMAL);
+    show.LCD_write_string( 0, 2,pass1,HL1[0] );
+     show.LCD_write_string( 6, 2,"-",MENU_NORMAL);
+      show.LCD_write_string( 12, 2,pass2,HL1[1] );
+      show.LCD_write_string( 18, 2,"-",MENU_NORMAL );
+       show.LCD_write_string( 24, 2,pass3,HL1[2] );
+        show.LCD_write_string( 30, 2,"-",MENU_NORMAL);
+        show.LCD_write_string( 36, 2,pass4,HL1[3] );
+        show.LCD_write_string( 42, 2,"-",MENU_NORMAL );
+         show.LCD_write_string( 48, 2,pass5,HL1[4] );
+                 show.LCD_write_string( 54, 2,"-",MENU_NORMAL );
+          show.LCD_write_string( 60, 2,pass6,HL1[5] );
+    show.LCD_write_string( 0, 4,"<OK>", h_s1);
+    show.LCD_write_string( 0, 5,"<Back", h_s);
+
+    if(h_s == 1 ){
+        if(analong_data>0.15 && analong_data<0.3){
+            show.LCD_clear();
+            count_menu =0;
+            state_menu =0;
+        }
+    }
+}
+
+void menu_register(){
+    if(analong_data>0.98){
+        count_menu -= 1;
+    }else if(analong_data<0.55 && analong_data>0.3){
+       count_menu += 1;
+    }
+    
+    if(count_menu == 1){
+         h_s=1;
+        }
+    else if(count_menu == 0){
+         h_s=0;
+   }else{
+         count_menu = 0;
+        }
+    show.LCD_write_string( 0, 0,"Register-RFID", MENU_NORMAL);
+    show.LCD_write_string( 0, 5,"<Back", h_s);
+    
+    if(h_s == 1 ){
+        if(analong_data>0.15 && analong_data<0.3){
+            show.LCD_clear();
+            state_menu =0;
+        }
+    }
+
+}
\ No newline at end of file

diff -r 28f3c9274ea7 -r 452282f5895f mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Sun Dec 10 06:11:35 2017 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/e7ca05fa8600
\ No newline at end of file

diff -r 28f3c9274ea7 -r 452282f5895f mbed.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.lib	Sun Dec 10 06:11:35 2017 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/gokmenascioglu/code/mbed/#a8fa94490a0a