AppNearMe Official / AppNearMe_MuNFC_PN532 Featured

AppNearMe µNFC stack for the NXP PN532 chip License: You can use the stack free of charge to prototype with mbed; if you want to use the stack with your commercial product, get in touch!

Dependents:   IOT_sensor_nfc AppNearMe_MuNFC_PN532_Test p2p_nfc_test NFCMoodLamp ... more

Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers pn532_registers.h Source File

pn532_registers.h

00001 /*
00002     pn532_registers.h 
00003     Copyright (c) Donatien Garnier 2012
00004     donatien.garnier@appnearme.com
00005     http://www.appnearme.com/
00006 */
00007 
00008 
00009 #ifndef PN532_REGISTERS_H_
00010 #define PN532_REGISTERS_H_
00011 
00012 
00013 #ifdef __cplusplus
00014 extern "C" {
00015 #endif
00016 
00017 //We only place common SFR-accessible registers here for now
00018 #define PN532_REG_CLU_STATUS2 0x6338 //Contains status flags of the receiver, transmitter and Data Mode Detector
00019 #define PN532_REG_CLU_CONTROL 0x633C//0xFFED //Contains miscellaneous Control Registers
00020 #define PN532_REG_CLU_BITFRAMING 0x633D//0xFFEE //Adjustments for bit oriented frames
00021 #define PN532_REG_CLU_MANUALRCV 0x630D //Tuning of the internal receiver
00022 #define PN532_REG_CLU_TXMODE 0x6302 //Defines the transmission data rate and framing during transmission
00023 #define PN532_REG_CLU_RXMODE 0x6303 //Defines the reception data rate and framing during receiving
00024 #define PN532_REG_CLU_TXAUTO 0x6305 //Controls the setting of the antenna driver
00025 #define PN532_REG_CLU_MODE 0x6301 //Defines general modes for transmitting and receiving.
00026 #define PN532_REG_CLU_MIFNFC 0x630C //Defines ISO/IEC 14443A/MIFARE/NFC specific settings in target or card operating mode.
00027 
00028 #ifdef __cplusplus
00029 }
00030 #endif
00031 
00032 
00033 #endif /* PN532_REGISTERS_H_ */