A simple library for SSH1106 controlled GLCDs
SSH1106.h
- Committer:
- Anaesthetix
- Date:
- 2016-12-19
- Revision:
- 0:3cd0a11a2f91
- Child:
- 1:ac9efaadd666
File content as of revision 0:3cd0a11a2f91:
/** * This is a simple library for SSH1106 controlled graphic LCD's. * Written for a 1.3" OLED GLCD * See http://www.banggood.com/1_3-Inch-7Pin-White-OLED-12864-SPI-Interface-LCD-Display-Module-For-Arduino-p-1067872.html * * Written by: Erik van de Coevering * With thanks to Tim Barr from whom I've reused some code * Use this code in whatever way you like, as long as it stays free of charge! */ #ifndef SSH1106_H #define SSH1106_H #include "mbed.h" #include "font_4x5.h" #include "font_5x8.h" #include "font_6x6.h" #include "font_6x8.h" #include "font_7x7.h" #include "font_8x8.h" #include "font_8x8_1.h" #include "bold_font.h" #include "font2d_hunter.h" #include "font2d_formplex12.h" #include "biohazard.h" #include "highvoltage.h" #include "einstein.h" #include "test.h" #include "copter.h" #define LCDWIDTH 128 #define LCDHEIGHT 64 #define LCDPAGES 8 class SSH1106 { public: // Constructor SSH1106(SPI &spi, DigitalOut &lcd_cs, DigitalOut &cd, DigitalOut &rst); // Initialize LCD void init(void); // Set contrast (0 - 63), initialized to 40 void setContrast(char contrast); // Place cursor at position void setCursor(char column, char line); // Clear screen void clear(void); // Write text to LCD where font format is a 2-dimensional array (only 96x8, 8x8 pixel fonts supported) void writeText2d(char column, char page, const char font_address[96][8], const char *text, int size); // Write text to LCD where font format is a 1-dimensional array. Fonts bigger than 8 pix high should work but isn't tested void writeText(char column, char page, const char *font_address, const char *str, const uint8_t size); // Draw a 128x64 pixel bitmap void drawBitmap(const char *data); private: SPI *_lcd; DigitalOut *_lcd_cs; DigitalOut *_lcd_cd; DigitalOut *_lcd_rst; uint8_t _lcdbuffer[LCDWIDTH*LCDPAGES]; }; #endif