Alex K / Mbed OS mbed-os5-press_16

Messages transmitted via pc.printf to PC are supplemented with checksums to increase the reliability of communication.The pc.printf command was introduced, which sends an empty string once per second in case of data loss (corruption) during transfer

Dependencies:   _24LCXXX

Changes

RevisionDateWhoCommit message
8:bf73cc68a823 2020-09-11 Aleksk Messages transmitted via pc.printf to PC are supplemented with checksums to increase the reliability of communication.The pc.printf command was introduced, which sends an empty string once per second in case of data loss (corruption) during transfer default tip
7:97881cd71b31 2020-06-19 Aleksk The values of the EEPROM2 settings are displayed in pc.print in a special line with the current diagnostic data.; An additional block has been made in the parser for decoding incoming alarm settings; they are written in EEPROM2.
6:fe0a7180ebb7 2020-06-11 Aleksk An additional block has been made in the parser for decoding incoming alarm settings for writing to the EEPROM. Additional digital inputs are activated.
5:bb595cde0c82 2020-06-04 Aleksk The flag of the Stop button is accepted - closing of 4 valves,; and the flag of the compressor buttons is a command for discrete output PB_10. The num_chan setting is switching the channel number for the feedback of the controller, written in EEPROM
4:c34b84bfa2fb 2020-05-27 Aleksk When receiving a command line with a zero sum (empty lines), the flag_zerostart flag is set, and the current settings and values are transferred to the series. These zero settings are not entered into the controller and are not written to the EEPROM.
3:712f751b4974 2020-05-15 Aleksk Continuation (clone) mbed-os5-inerrupt_serial_readable_FIFO_12; Connected EEPROM. Now the settings are retrieved from it upon reboot. A watchdog timer has been created that expires after 100ms.
2:8230a5a4cc13 2020-05-15 Aleksk creates eeprom a watchdog timer that expires after 100 ms
1:1d4ec28f17c4 2020-05-08 Aleksk The microcontroller program has been changed so that when restarting or turning on the power, all valves are closed.
0:f2aaa8c6decf 2020-05-01 Aleksk The new parser with the FIFO buffer is very fast. You can send data every 20 ms, this does not affect the cycle time of the relay controller. CR LF line ending characters are desirable but not required.