Alex K

Public Repositories (19)

Sort by: Date Alphabetical Imports Commits
  • mbed-os5-press_26

    Added integration of analog channels, introduced three new setpoints (Pb_1, Pb_2, Tp) for automatic compressor operation.

    # compressor, #integration
    Last updated: 24 Dec 2021 14 0
  • mbed-os5-press_24

    The weight is now transmitted in Newtons. For this, two bytes are transferred over the i2c bus instead of one.

    I2S, n, weight
    Last updated: 15 Oct 2021 13 0
  • Mbed OS
    mbed-os5-press_23

    On the i2c bus, Arduino Nano with address 2, transmits the weight value with a resolution of 1 kg.

    I2C, master-slave
    Last updated: 08 Oct 2021 12 3
  • Mbed OS
    mbed-os5-press_22

    digital pin 11, pin 12 as an input limit switches are now normally closed. Returned timer_4. He now periodically opens the outlet valve to control water leaks. New variables are …

    control, H2O
    Last updated: 12 Mar 2021 11 2
  • mbed-os5-press_21

    Removed pc.printf command that sends empty string once per second and associated timer_4, since the operator program was changed, a new operator Loc () was introduced into it. Instead of …

    Last updated: 11 Nov 2020 10 0
  • mbed-os5-press_16

    Messages transmitted via pc.printf to PC are supplemented with checksums to increase the reliability of communication.The pc.printf command was introduced, which sends an empty string once per second in case …

    Last updated: 11 Sep 2020 9 0
  • mbed-os5-press_13

    The values of the EEPROM2 settings are displayed in pc.print in a special line with the current diagnostic data. An additional block has been made in the parser for decoding …

    Last updated: 19 Jun 2020 8 0
  • Mbed OS
    mbed-os5-press_10

    An additional block has been made in the parser for decoding incoming alarm settings for writing to the EEPROM. Additional digital inputs are activated.

    Last updated: 11 Jun 2020 7 0
  • Mbed OS
    mbed-os5-press_7

    The flag of the Stop button is accepted - closing of 4 valves, and the flag of the compressor buttons is a command for discrete output PB_10. The num_chan setting …

    Last updated: 04 Jun 2020 6 1
  • Mbed OS
    mbed-os5-press_5

    When receiving a command line with a zero sum (empty lines), the flag_zerostart flag is set, and the current settings and values are transferred to the series. These zero settings …

    Last updated: 27 May 2020 5 0