Alejandro Zamudio
Este programa lee la temperatura de un sensor y la despliega en un display
Dependencies: Hotboards_SpiLcd Hotboards_temp mbed
Revision 0:145a79fbba51, committed 2016-06-16
- Comitter:
- AlejandroZamudio
- Date:
- Thu Jun 16 18:41:30 2016 +0000
- Commit message:
- Version1
Changed in this revision
diff -r 000000000000 -r 145a79fbba51 Hotboards_SpiLcd.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Hotboards_SpiLcd.lib Thu Jun 16 18:41:30 2016 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/Hotboards/code/Hotboards_SpiLcd/#e16488b64ef7
diff -r 000000000000 -r 145a79fbba51 Hotboards_temp.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Hotboards_temp.lib Thu Jun 16 18:41:30 2016 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/Hotboards/code/Hotboards_temp/#f850ee1083ba
diff -r 000000000000 -r 145a79fbba51 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Thu Jun 16 18:41:30 2016 +0000
@@ -0,0 +1,78 @@
+/*
+ Hotboards_SpiLcd Library - Hello World
+
+ Demonstrates the use a 16x2 LCD display. The Hotboards_SpiLcd
+ library works with all LCD displays that are compatible with the
+ SP7032 driver presented on Spi Lcd board (http://www.hotboards.org).
+
+ This sketch prints "Hello World!" to the LCD
+ and shows the time.
+
+ The circuit:
+ * BKL --> GND
+ * VDD --> 3.3v
+ * GND --> GND
+ * SCLK --> PB_3
+ * SI --> PB_5
+ * CS --> PC_0
+ * RS --> PC_1
+ * RST --> PC_2
+
+ Library and example ported by Diego from Hotboards and originally cretaed by
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe
+ modified 22 Nov 2010
+ by Tom Igoe
+ This example code is in the public domain.
+ */
+
+#include "mbed.h"
+#include "Hotboards_SpiLcd.h"
+#include "Hotboards_temp.h"
+
+// new instance of serial port
+Serial pc(USBTX, USBRX);
+//I2C instance for the library
+I2C device1( I2C_SDA, I2C_SCL );
+// instance a sensor with address number 7 (none of the jumpers on the board is short circuted)
+// and also 0.5 celsius degrees resolution
+Hotboards_temp sensor( device1, Sensor_7);
+
+
+// initialize the spi peripherals, setting the spi pins
+SPI device( PB_5, NC, PB_3 ); // mosi, miso, sclk
+// initialize the library with the numbers of the interface pins
+Hotboards_SpiLcd display( device, PC_0, PC_1, PC_2 ); //spi, cs, rs, rst
+
+int main( void )
+{
+ // sensor init
+ sensor.init();
+ sensor.setResolution(_0p0625C);
+
+ uint8_t milis = 0;
+ // set the spi frequency to 5MHz
+ device.frequency(5000000);
+ // initialize internal lcd controller:
+ display.init();
+ // Print a message to the LCD.
+ display.printf( "Temperatura" );
+
+ while(1)
+
+ {
+ // read temperature in celcius degrees
+ float temp = sensor.read();
+ // set the cursor to column 0, line 1
+ // (note: line 1 is the second row, since counting begins with 0):
+ display.setCursor( 0, 1 );
+ wait( 1 );
+ milis++;
+ // print the number of seconds since reset:
+ display.printf( "Grados: %3.3f C", temp);
+ }
+}
+
\ No newline at end of file
diff -r 000000000000 -r 145a79fbba51 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Thu Jun 16 18:41:30 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/6c34061e7c34 \ No newline at end of file