APS Lab
SmartMesh QSL for STM32F4 version
Fork of
COG-AD4050_QSL
by 
APS Lab
Revision 1:b909b8399252, committed 2018-07-12
- Comitter:
- APS_Lab
- Date:
- Thu Jul 12 09:19:12 2018 +0000
- Parent:
- 0:8ca1e814a851
- Commit message:
- SmartMesh for STM32F4 version
Changed in this revision
--- a/ADXL362.lib Wed May 02 09:26:10 2018 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1 +0,0 @@ -http://mbed.org/users/rmcwilliam101/code/ADXL362/#d9853774f233
--- a/dn_uart.cpp Wed May 02 09:26:10 2018 +0000 +++ b/dn_uart.cpp Thu Jul 12 09:19:12 2018 +0000 @@ -14,9 +14,9 @@ //=========================== defines ========================================= -// Set correct pins for external UART on your board (USART1 for NUCLEO-L053R8) -#define UART_MOTE_TX USBTX -#define UART_MOTE_RX USBRX +// Set correct pins for external UART on your board (USART1 for NUCLEO-F411) +#define UART_MOTE_TX PA_9 +#define UART_MOTE_RX PA_10 //=========================== variables =======================================
--- a/main.cpp Wed May 02 09:26:10 2018 +0000
+++ b/main.cpp Thu Jul 12 09:19:12 2018 +0000
@@ -13,7 +13,7 @@
#include "dn_debug.h" // Included to borrow debug macros
#include "dn_endianness.h" // Included to borrow array copying
#include "dn_time.h" // Included to borrow sleep function
-#include "ADXL362.h"
+//#include "ADXL362.h"
#define NETID 0 // Factory default value used if zero (1229)
#define JOINKEY NULL // Factory default value used if NULL (44 55 53 54 4E 45 54 57 4F 52 4B 53 52 4F 43 4B)
@@ -23,22 +23,22 @@
#define DATA_PERIOD_MS 500 // Should be longer than (or equal to) bandwidth
// We can use debug macros from dn_debug, as stdio defaults to this serial
-//Serial serialDebug(USBTX1, USBRX1);
+Serial serialDebug(USBTX, USBRX);
#define log_info serialDebug.printf
// LED2 is the green LED on the NUCLEO-L053R8; might change for other boards
DigitalOut myled(LED1);
DigitalOut status(LED2);
-ADXL362 Acc(P1_07, P1_08, P1_06, P1_10);
+//ADXL362 Acc(P1_07, P1_08, P1_06, P1_10);
static uint16_t randomWalk(void);
static void parsePayload(const uint8_t *payload, uint8_t size);
-void init_acc(void)
-{
- Acc.init_spi();
- Acc.init_adxl362();
-}
+//void init_acc(void)
+//{
+// Acc.init_spi();
+// Acc.init_adxl362();
+//}
int main()
{
@@ -46,7 +46,7 @@
uint8_t inboxBuf[DN_DEFAULT_PAYLOAD_SIZE_LIMIT];
uint8_t bytesRead;
uint8_t i,e;
- int8_t x0, y0, z0;
+ //int8_t x0, y0, z0;
myled=1;
status=1;
@@ -61,14 +61,15 @@
myled=1;
status=1;
- init_acc();
+ //init_acc();
// Configure SysTick for timing
millisStart();
// Set PC debug serial baudrate
- //serialDebug.baud(115200);
+ serialDebug.baud(115200);
+ serialDebug.printf("STM32F4 SmartMesh Demo\n");
- //log_info("Initializing...");
+ log_info("Initializing...");
dn_qsl_init();
// Flash LED to indicate start-up complete
@@ -82,25 +83,25 @@
while(TRUE) {
if (dn_qsl_isConnected())
{
- Acc.ACC_GetXYZ8(&x0, &y0, &z0);
- payload[0]=x0;
- payload[1]=y0;
- payload[2]=z0;
- //uint16_t val = randomWalk();
+ //Acc.ACC_GetXYZ8(&x0, &y0, &z0);
+ //payload[0]=x0;
+ //payload[1]=y0;
+ //payload[2]=z0;
+ uint16_t val = randomWalk();
static uint8_t count = 0;
myled = 1; // Turn off LED during send/read
status = 0;
- //dn_write_uint16_t(payload, val);
- payload[3] = count;
+ dn_write_uint16_t(payload, val);
+ payload[0] = count;
if (dn_qsl_send(payload, sizeof (payload), DEST_PORT))
{
- //log_info("Sent message nr %u: %u", count, val);
+ log_info("Sent message nr %u: %u", count, val);
count++;
status=1;
} else
{
- //log_info("Send failed");
+ log_info("Send failed");
status=0;
}
@@ -114,7 +115,7 @@
dn_sleep_ms(DATA_PERIOD_MS);
} else
{
- //log_info("Connecting...");
+ log_info("Connecting...");
myled = 1; // Not connected; turn off LED
if (dn_qsl_connect(NETID, JOINKEY, SRC_PORT, BANDWIDTH_MS))
{
@@ -122,7 +123,7 @@
status=1;//log_info("Connected to network");
} else
{
- //log_info("Failed to connect");
+ log_info("Failed to connect");
}
}
status=0;
@@ -165,8 +166,8 @@
for (i = 0; i < size; i++)
{
msg[i] = payload[i];
- //log_info("\tByte# %03u: %#.2x (%u)", i, payload[i], payload[i]);
+ log_info("\tByte# %03u: %#.2x (%u)", i, payload[i], payload[i]);
}
msg[size] = '\0';
- //log_info("\tMessage: %s", msg);
+ log_info("\tMessage: %s", msg);
}
--- a/mbed-os.lib Wed May 02 09:26:10 2018 +0000 +++ b/mbed-os.lib Thu Jul 12 09:19:12 2018 +0000 @@ -1,1 +1,1 @@ -https://github.com/ARMmbed/mbed-os/#f9ee4e849f8cbd64f1ec5fdd4ad256585a208360 +https://github.com/ARMmbed/mbed-os/#35fa909641fedcad9bbe0c7300d4ccdf15a2b71a
--- a/sm_qsl/dn_debug.h Wed May 02 09:26:10 2018 +0000
+++ b/sm_qsl/dn_debug.h Thu Jul 12 09:19:12 2018 +0000
@@ -19,9 +19,9 @@
/* Comment out this define to include log messages */
#define NLOG 0
-#if 0
+#if 1
#ifdef NDEBUG
-#define debug(M, ...) do {}while(0)
+//#define debug(M, ...) do {}while(0)
#else
#define debug(M, ...) fprintf(stderr, "DEBUG %s:%d: " M "\r\n", __FILE__, __LINE__, ##__VA_ARGS__)
#endif
@@ -29,9 +29,9 @@
#define clean_errno() (errno == 0 ? "None" : strerror(errno))
#ifdef NLOG
-#define log_err(M, ...) do {}while(0)
-#define log_warn(M, ...) do {}while(0)
-#define log_info(M, ...) do {}while(0)
+//#define log_err(M, ...) do {}while(0)
+//#define log_warn(M, ...) do {}while(0)
+//#define log_info(M, ...) do {}while(0)
#else
#define log_err(M, ...) fprintf(stderr, "[ERROR] (%s:%d: errno: %s) " M "\r\n", __FILE__, __LINE__, clean_errno(), ##__VA_ARGS__)
#define log_warn(M, ...) fprintf(stderr, "[WARN] (%s:%d: errno: %s) " M "\r\n", __FILE__, __LINE__, clean_errno(), ##__VA_ARGS__)