Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
Program3_Servo
by 
Robotics Kit Workshop
You are viewing an older revision! See the latest version
Homepage
Seeed_Arch_link_Servo¶
Setup¶
- Connect the Temperature sensor as well as the Servo to the Seeeduino-Arch-Link board, and then connect the board to you PC using the micro-USB cable.
- The board mounts as a mass-storage device (like a USB drive). Verify that you can see it (drive name will be MBED).
- Go to http://developer.mbed.org
- Create an ARM mbed account if you do not have one.
- On the top right corner, click the Compiler button.
An IDE should open. Congratulations!
On Windows: To see debug messages, install the serial driver.
Debug messages: We can talk to the board via a serial port, but you might need some software. Read this doc and install required software (like PuTTY or CoolTermon Windows).
Locally: If you like things locally, you can do so by exporting to a supported toolchain.
I very much recommend to just use the online IDE, as it makes it easier for us, but if you want to continue hacking in the future, this is a nice way.