File content as of revision 5:5fa655d7212c:

/**
 * @file ESP8266.h
 * @brief The definition of class ESP8266. 
 * @author Wu Pengfei<pengfei.wu@itead.cc> 
 * @date 2015.02
 * 
 * @par Copyright:
 * Copyright (c) 2015 ITEAD Intelligent Systems Co., Ltd. \n\n
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version. \n\n
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
#ifndef __ESP8266_H__
#define __ESP8266_H__

#include "ArduinoAPI.h"

/**
 * Provide an easy-to-use way to manipulate ESP8266. 
 */
class ESP8266 {
 public:
 
    /**
     * Constuctor. 
     *
     * @param uart - an reference of ArduinoSerial object with baud 9600. 
     */
    ESP8266(ArduinoSerial &uart); /* baud rate is 9600 */
    
    /** 
     * Verify ESP8266 whether live or not. 
     *
     * Actually, this method will send command "AT" to ESP8266 and waiting for "OK". 
     * 
     * @retval true - alive.
     * @retval false - dead.
     */
    bool kick(void);
    
    /**
     * Restart ESP8266 by "AT+RST". 
     *
     * This method will take 3 seconds or more. 
     *
     * @retval true - success.
     * @retval false - failure.
     */
    bool restart(void);
    
    /**
     * Get the version of AT Command Set. 
     * 
     * @return the string of version. 
     */
    String getVersion(void);
    
    /**
     * Set operation mode to staion. 
     * 
     * @retval true - success.
     * @retval false - failure.
     */
    bool setOprToStation(void);
    
    /**
     * Set operation mode to softap. 
     * 
     * @retval true - success.
     * @retval false - failure.
     */
    bool setOprToSoftAP(void);
    
    /**
     * Set operation mode to station + softap. 
     * 
     * @retval true - success.
     * @retval false - failure.
     */
    bool setOprToStationSoftAP(void);
    
    /**
     * Search available AP list and return it.
     * 
     * @return the list of available APs. 
     * @note This method will occupy a lot of memeory(hundreds of Bytes to a couple of KBytes). 
     *  Do not call this method unless you must and ensure that your board has enough memery left.
     */
    String getAPList(void);
    
    /**
     * Join in AP. 
     *
     * @param ssid - SSID of AP to join in. 
     * @param pwd - Password of AP to join in. 
     * @retval true - success.
     * @retval false - failure.
     * @note This method will take a couple of seconds. 
     */
    bool joinAP(String ssid, String pwd);
    
    /**
     * Leave AP joined before. 
     *
     * @retval true - success.
     * @retval false - failure.
     */
    bool leaveAP(void);
    
    /**
     * Set SoftAP parameters. 
     * 
     * @param ssid - SSID of SoftAP. 
     * @param pwd - PASSWORD of SoftAP. 
     * @param chl - the channel (1 - 13, default: 7). 
     * @param ecn - the way of encrypstion (0 - OPEN, 1 - WEP, 
     *  2 - WPA_PSK, 3 - WPA2_PSK, 4 - WPA_WPA2_PSK, default: 0). 
     * @note This method should not be called when station mode. 
     */
    bool setSoftAPParam(String ssid, String pwd, uint8_t chl = 7, uint8_t ecn = 0);
    
    /**
     * Get the IP list of devices connected to SoftAP. 
     * 
     * @return the list of IP.
     * @note This method should not be called when station mode. 
     */
    String getJoinedDeviceIP(void);
    
    /**
     * Get the current status of connection(UDP and TCP). 
     * 
     * @return the status. 
     */
    String getIPStatus(void);
    
    /**
     * Get the IP address of ESP8266. 
     *
     * @return the IP list. 
     */
    String getLocalIP(void);
    
    /**
     * Enable IP MUX(multiple connection mode). 
     *
     * In multiple connection mode, a couple of TCP and UDP communication can be builded. 
     * They can be distinguished by the identifier of TCP or UDP named mux_id. 
     * 
     * @retval true - success.
     * @retval false - failure.
     */
    bool enableMUX(void);
    
    /**
     * Disable IP MUX(single connection mode). 
     *
     * In single connection mode, only one TCP or UDP communication can be builded. 
     * 
     * @retval true - success.
     * @retval false - failure.
     */
    bool disableMUX(void);
    
    
    /**
     * Create TCP connection in single mode. 
     * 
     * @param addr - the IP or domain name of the target host. 
     * @param port - the port number of the target host. 
     * @retval true - success.
     * @retval false - failure.
     */
    bool createTCP(String addr, uint32_t port);
    
    /**
     * Release TCP connection in single mode. 
     * 
     * @retval true - success.
     * @retval false - failure.
     */
    bool releaseTCP(void);
    
    /**
     * Register UDP port number in single mode.
     * 
     * @param addr - the IP or domain name of the target host. 
     * @param port - the port number of the target host. 
     * @retval true - success.
     * @retval false - failure.
     */
    bool registerUDP(String addr, uint32_t port);
    
    /**
     * Unregister UDP port number in single mode. 
     * 
     * @retval true - success.
     * @retval false - failure.
     */
    bool unregisterUDP(void);
  
    /**
     * Create TCP connection in multiple mode. 
     * 
     * @param mux_id - the identifier of this TCP(available value: 0 - 4). 
     * @param addr - the IP or domain name of the target host. 
     * @param port - the port number of the target host. 
     * @retval true - success.
     * @retval false - failure.
     */
    bool createTCP(uint8_t mux_id, String addr, uint32_t port);
    
    /**
     * Release TCP connection in multiple mode. 
     * 
     * @param mux_id - the identifier of this TCP(available value: 0 - 4). 
     * @retval true - success.
     * @retval false - failure.
     */
    bool releaseTCP(uint8_t mux_id);
    
    /**
     * Register UDP port number in multiple mode.
     * 
     * @param mux_id - the identifier of this TCP(available value: 0 - 4). 
     * @param addr - the IP or domain name of the target host. 
     * @param port - the port number of the target host. 
     * @retval true - success.
     * @retval false - failure.
     */
    bool registerUDP(uint8_t mux_id, String addr, uint32_t port);
    
    /**
     * Unregister UDP port number in multiple mode. 
     * 
     * @param mux_id - the identifier of this TCP(available value: 0 - 4). 
     * @retval true - success.
     * @retval false - failure.
     */
    bool unregisterUDP(uint8_t mux_id);


    /**
     * Set the timeout of TCP Server. 
     * 
     * @param timeout - the duration for timeout by second(0 ~ 28800, default:180). 
     * @retval true - success.
     * @retval false - failure.
     */
    bool setTCPServerTimeout(uint32_t timeout = 180);
    
    /**
     * Start TCP Server(Only in multiple mode). 
     * 
     * After started, user should call method: getIPStatus to know the status of TCP connections. 
     * The methods of receiving data can be called for user's any purpose. After communication, 
     * release the TCP connection is needed by calling method: releaseTCP with mux_id. 
     *
     * @param port - the port number to listen(default: 333).
     * @retval true - success.
     * @retval false - failure.
     *
     * @see String getIPStatus(void);
     * @see uint32_t recv(uint8_t *coming_mux_id, uint8_t *buffer, uint32_t len, uint32_t timeout);
     * @see bool releaseTCP(uint8_t mux_id);
     */
    bool startTCPServer(uint32_t port = 333);

    /**
     * Stop TCP Server(Only in multiple mode). 
     * 
     * @retval true - success.
     * @retval false - failure.
     */
    bool stopTCPServer(void);

    /**
     * Send data based on TCP or UDP builded already in single mode. 
     * 
     * @param buffer - the buffer of data to send. 
     * @param len - the length of data to send. 
     * @retval true - success.
     * @retval false - failure.
     */
    bool send(const uint8_t *buffer, uint32_t len);
            
    /**
     * Send data based on one of TCP or UDP builded already in multiple mode. 
     * 
     * @param mux_id - the identifier of this TCP(available value: 0 - 4). 
     * @param buffer - the buffer of data to send. 
     * @param len - the length of data to send. 
     * @retval true - success.
     * @retval false - failure.
     */
    bool send(uint8_t mux_id, const char *buffer, uint32_t len);
    
    /**
     * Receive data from TCP or UDP builded already in single mode. 
     *
     * @param buffer - the buffer for storing data. 
     * @param len - the length of the buffer. 
     * @param timeout - the time waiting data. 
     * @return the length of data received actually. 
     */
    uint32_t recv(uint8_t *buffer, uint32_t len, uint32_t timeout = 1000);
    
    /**
     * Receive data from one of TCP or UDP builded already in multiple mode. 
     *
     * @param mux_id - the identifier of this TCP(available value: 0 - 4). 
     * @param buffer - the buffer for storing data. 
     * @param len - the length of the buffer. 
     * @param timeout - the time waiting data. 
     * @return the length of data received actually. 
     */
    uint32_t recv(uint8_t mux_id, uint8_t *buffer, uint32_t len, uint32_t timeout = 1000);
    
    /**
     * Receive data from all of TCP or UDP builded already in multiple mode. 
     *
     * After return, coming_mux_id store the id of TCP or UDP from which data coming. 
     * User should read the value of coming_mux_id and decide what next to do. 
     * 
     * @param coming_mux_id - the identifier of TCP or UDP. 
     * @param buffer - the buffer for storing data. 
     * @param len - the length of the buffer. 
     * @param timeout - the time waiting data. 
     * @return the length of data received actually. 
     */
    uint32_t recv(uint8_t *coming_mux_id, uint8_t *buffer, uint32_t len, uint32_t timeout = 1000);

 private:
    String recvFind(String target, uint32_t timeout = 1000);
    String recvFind(String target1, String target2, uint32_t timeout = 1000);
    String recvFind(String target1, String target2, String target3, uint32_t timeout = 1000);
    
    bool eAT(void);
    bool eATRST(void);
    String eATGMR(void);
    
    bool sATCWMODE(uint8_t mode);
    ArduinoSerial *m_puart; /* The UART to communicate with ESP8266 */
 
};

#endif /* #ifndef __ESP8266_H__ */