test / mbed-src

mbed library sources

Dependents:   bare

Fork of mbed-src by mbed official

Auto generated API documentation and code listings for mbed-src

Classes

AnalogIn An analog input, used for reading the voltage on a pin
AnalogOut An analog output, used for setting the voltage on a pin
APSR_Type Union type to access the Application Program Status Register (APSR)
BusIn A digital input bus, used for reading the state of a collection of pins
BusInOut A digital input output bus, used for setting the state of a collection of pins
BusOut A digital output bus, used for setting the state of a collection of pins
CAN A can bus client, used for communicating with can devices
CANMessage CANMessage class
CONTROL_Type Union type to access the Control Registers (CONTROL)
CoreDebug_Type Structure type to access the Core Debug Register (CoreDebug)
DigitalIn A digital input, used for reading the state of a pin
DigitalInOut A digital input/output, used for setting or reading a bi-directional pin
DigitalOut A digital output, used for setting the state of a pin
DirHandle Represents a directory stream
DWT_Type Structure type to access the Data Watchpoint and Trace Register (DWT)
Ethernet An ethernet interface, to use with the ethernet pins
FileHandle An OO equivalent of the internal FILEHANDLE variable and associated _sys_* functions
FileSystemLike A filesystem-like object is one that can be used to open files though it by fopen("/name/filename", mode)
FPU_Type Structure type to access the Floating Point Unit (FPU)
FunctionPointer A class for storing and calling a pointer to a static or member void function
I2C An I2C Master, used for communicating with I2C slave devices
I2CSlave An I2C Slave, used for communicating with an I2C Master device
InterruptIn A digital interrupt input, used to call a function on a rising or falling edge
InterruptManager Use this singleton if you need to chain interrupt handlers
IPSR_Type Union type to access the Interrupt Program Status Register (IPSR)
ITM_Type Structure type to access the Instrumentation Trace Macrocell Register (ITM)
LocalFileSystem A filesystem for accessing the local mbed Microcontroller USB disk drive
MPU_Type Structure type to access the Memory Protection Unit (MPU)
NVIC_Type Structure type to access the Nested Vectored Interrupt Controller (NVIC)
PortIn A multiple pin digital input
PortInOut A multiple pin digital in/out used to set/read multiple bi-directional pins
PortOut A multiple pin digital out
PwmOut A pulse-width modulation digital output
RawSerial A serial port (UART) for communication with other serial devices This is a variation of the Serial class that doesn't use streams, thus making it safe to use in interrupt handlers with the RTOS
SCB_Type Structure type to access the System Control Block (SCB)
SCnSCB_Type Structure type to access the System Control and ID Register not in the SCB
Serial A serial port (UART) for communication with other serial devices
SerialBase A base class for serial port implementations Can't be instantiated directly (use Serial or RawSerial )
SPI A SPI Master, used for communicating with SPI slave devices
SPISlave A SPI slave, used for communicating with a SPI Master device
SysTick_Type Structure type to access the System Timer (SysTick)
Ticker A Ticker is used to call a function at a recurring interval
Timeout A Timeout is used to call a function at a point in the future
Timer A general purpose timer
TimerEvent Base abstraction for timer interrupts
TPI_Type Structure type to access the Trace Port Interface Register (TPI)
xPSR_Type Union type to access the Special-Purpose Program Status Registers (xPSR)

Code
AnalogIn.h [code]
analogin_api.h [code]
AnalogOut.h [code]
analogout_api.h [code]
board.c [code]
BusIn.cpp [code]
BusIn.h [code]
BusInOut.cpp [code]
BusInOut.h [code]
BusOut.cpp [code]
BusOut.h [code]
CallChain.cpp [code]
CallChain.h [code]
CAN.cpp [code]
CAN.h [code]
can_api.h [code]
can_helper.h [code]
core_cm4.h [code] CMSIS Cortex-M4 Core Peripheral Access Layer Header File
core_cm4_simd.h [code] CMSIS Cortex-M4 SIMD Header File
core_cmFunc.h [code] CMSIS Cortex-M Core Function Access Header File
core_cmInstr.h [code] CMSIS Cortex-M Core Instruction Access Header File
DigitalIn.h [code]
DigitalInOut.h [code]
DigitalOut.h [code]
DirHandle.h [code]
error.h [code]
Ethernet.cpp [code]
Ethernet.h [code]
ethernet_api.h [code]
exit.c [code]
FileBase.cpp [code]
FileBase.h [code]
FileHandle.h [code]
FileLike.cpp [code]
FileLike.h [code]
FilePath.cpp [code]
FilePath.h [code]
FileSystemLike.cpp [code]
FileSystemLike.h [code]
FunctionPointer.cpp [code]
FunctionPointer.h [code]
gpio.c [code]
gpio_api.h [code]
gpio_irq_api.h [code]
I2C.cpp [code]
I2C.h [code]
i2c_api.h [code]
I2CSlave.cpp [code]
I2CSlave.h [code]
InterruptIn.cpp [code]
InterruptIn.h [code]
InterruptManager.cpp [code]
InterruptManager.h [code]
LocalFileSystem.cpp [code]
LocalFileSystem.h [code]
mbed.h [code]
mbed_debug.h [code]
mbed_interface.c [code]
mbed_interface.h [code]
pinmap.h [code]
pinmap_common.c [code]
platform.h [code]
port_api.h [code]
PortIn.h [code]
PortInOut.h [code]
PortOut.h [code]
PwmOut.h [code]
pwmout_api.h [code]
RawSerial.cpp [code]
RawSerial.h [code]
retarget.cpp [code]
rtc_api.h [code]
rtc_time.c [code]
rtc_time.h [code]
semihost_api.c [code]
semihost_api.h [code]
Serial.cpp [code]
Serial.h [code]
serial_api.h [code]
SerialBase.cpp [code]
SerialBase.h [code]
sleep_api.h [code]
SPI.cpp [code]
SPI.h [code]
spi_api.h [code]
SPISlave.cpp [code]
SPISlave.h [code]
Stream.cpp [code]
Stream.h [code]
Ticker.cpp [code]
Ticker.h [code]
Timeout.cpp [code]
Timeout.h [code]
Timer.cpp [code]
Timer.h [code]
TimerEvent.cpp [code]
TimerEvent.h [code]
toolchain.h [code]
us_ticker_api.c [code]
us_ticker_api.h [code]
wait_api.c [code]
wait_api.h [code]