Shields / Mbed 2 deprecated Seeed_SDCard_Shield

Example program for SD card shield on SPI pins D10-D13

Dependencies:   SDFileSystem mbed

The program uses the standard Arduino shields SPI pins:

SignalPin
SCKD13
MISOD12
MOSID11
CSD10

Note that this shield doesn't use the standard SPI pins, but relies on non-standard 6-pin SPI header located at the shield bottom. To make it work you will have to bridge those pins as shown on the image (the green SPI pins).

SignalPin 1Pin 2
MOSID11SPI4
MISOD12SPI1
SCKD13SPI3
CSD10D4

History

Update mbed library. default tip

2015-02-13, by screamer [Fri, 13 Feb 2015 09:40:18 +0000] rev 4

Update mbed library.

Add Apache2 license compatible header

2014-07-25, by screamer [Fri, 25 Jul 2014 12:26:55 +0000] rev 3

Add Apache2 license compatible header

Update mbed library to the latest revision

2014-07-25, by screamer [Fri, 25 Jul 2014 10:39:00 +0000] rev 2

Update mbed library to the latest revision

Remove LEDs utilization due to incompatibility with some boards (e.g. SPI pins are also LED pins)

2014-03-25, by screamer [Tue, 25 Mar 2014 17:39:19 +0000] rev 1

Remove LEDs utilization due to incompatibility with some boards (e.g. SPI pins are also LED pins)

Initial release

2014-03-17, by screamer [Mon, 17 Mar 2014 15:45:16 +0000] rev 0

Initial release