Shields / Mbed 2 deprecated Seeed_NFC_Shield_write

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependencies:   PN532 mbed

You are viewing an older revision! See the latest version

Homepage

The program uses the standard Arduino shields SPI pins:

  • D13 - sck
  • D12 - miso
  • D11 - mosi
  • D10 - sel

Note that the shield doesn't use the standard SPI pins by default, but relies on non-standard SPI pinout connector located at the shield bottom. To make it work you will have to bridge those pins as shown on this image (the green SPI pins)

All wikipages