Revision 2:2872862bf1c0, committed 2017-12-11

Comitter:

ataphon21938

Date:

Mon Dec 11 09:18:34 2017 +0000

Parent:

1:486ccde79dc6

Commit message:

11/12/2560

Changed in this revision

--- a/main.cpp	Sat Nov 14 08:28:43 2015 +0000
+++ b/main.cpp	Mon Dec 11 09:18:34 2017 +0000
@@ -1,71 +1,63 @@
-//Test of cheap 13.56 Mhz RFID-RC522 module from eBay
-//This code is based on Martin Olejar's MFRC522 library. Minimal changes
-//Adapted for Nucleo STM32 F401RE. Should work on other Nucleos too
-
-//Connect as follows:
-//RFID pins        ->  Nucleo header CN5 (Arduino-compatible header)
-//----------------------------------------
-//RFID IRQ=pin5    ->   Not used. Leave open
-//RFID MISO=pin4   ->   Nucleo SPI_MISO=PA_6=D12
-//RFID MOSI=pin3   ->   Nucleo SPI_MOSI=PA_7=D11
-//RFID SCK=pin2    ->   Nucleo SPI_SCK =PA_5=D13
-//RFID SDA=pin1    ->   Nucleo SPI_CS  =PB_6=D10
-//RFID RST=pin7    ->   Nucleo         =PA_9=D8
-//3.3V and Gnd to the respective pins                              
-                              
 #include "mbed.h"
 #include "MFRC522.h"
 
-// Nucleo Pin for MFRC522 reset (pick another D pin if you need D8)
-#define MF_RESET    D8
+#define MF_RESET    D8  // pin du Nucleo branchée à la pin RST du RC522
 
-DigitalOut LedGreen(LED1);
-
-//Serial connection to PC for output
-Serial pc(SERIAL_TX, SERIAL_RX);
+const char bonUID[4] = {0x90, 0xCF, 0x94, 0x75};
 
 MFRC522    RfChip   (SPI_MOSI, SPI_MISO, SPI_SCK, SPI_CS, MF_RESET);
 
+DigitalOut led_1(D2);  // LED verte à la pin D2
+DigitalOut led_2(D3);  // LED rouge à la pin D3
+
 int main(void) {
-  char uidcheck[ 100 ];
-  pc.printf("starting...\n");
 
-  // Init. RC522 Chip
   RfChip.PCD_Init();
 
   while (true) {
-    LedGreen = 1;
-
-    // Look for new cards
+    
+    int refus = 0;  // demeure nul si l'UID est bon
+    
     if ( ! RfChip.PICC_IsNewCardPresent())
     {
       wait_ms(500);
       continue;
     }
 
-    // Select one of the cards
     if ( ! RfChip.PICC_ReadCardSerial())
     {
       wait_ms(500);
       continue;
     }
-
-    LedGreen = 0;
-
-    // Print Card UID
          
-    pc.printf("Card UID: ");
     for (uint8_t i = 0; i < RfChip.uid.size; i++)
     {
-      pc.printf(" %X02", RfChip.uid.uidByte[i]);
-      uidcheck[i] = RfChip.uid.uidByte[i];
+      if (RfChip.uid.uidByte[i] != bonUID[i]) {
+          refus++;
+        }
     }
-    pc.printf("\n\r");
-
-    // Print Card type
-    uint8_t piccType = RfChip.PICC_GetType(RfChip.uid.sak);
-    pc.printf("PICC Type: %s \n\r", RfChip.PICC_GetTypeName(piccType));
-    wait_ms(1000);
+    //printf("%d\n",refus);
+    printf("%d%d%d%d\n",RfChip.uid.uidByte[0],RfChip.uid.uidByte[1],RfChip.uid.uidByte[2],RfChip.uid.uidByte[3]);
+    /*printf("%d%d%d%d\n",bonUID[0],bonUID[1],bonUID[2],bonUID[3]);
+    printf("%d\n",RfChip.uid.size);*/
+    if (refus == 4) // UID accepté
+    {
+        printf("DATA1 OK \n");
+        printf("Temp = %d \n",RfChip.uid.uidByte[0]);
+        printf("Hum = %d \n",RfChip.uid.uidByte[1]);
+        printf("Lux = %d \n",RfChip.uid.uidByte[2]);
+        printf("water = %d \n",RfChip.uid.uidByte[3]);
+        // on allume la LED verte pendant quelques secondes
+    led_1 = 1; // On allume la LED 1
+    wait_ms(5000);
+    led_1 = 0; // On éteint la LED 1
+    }
+    else  {  // UID refusé
+        // on allume la LED rouge pendant quelques secondes
+        printf("DATA Error\n");
+    led_2 = 1;
+    wait_ms(5000);
+    led_2 = 0;
+    }     
   }
-   
 }
\ No newline at end of file