Diff: nexpaq_mdk.h

Revision:

0:9ac726a95d44

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nexpaq_mdk.h	Fri Sep 23 16:19:39 2016 +0000
@@ -0,0 +1,113 @@
+/*
+ * np_module_mdk_v1.h
+ *	developer call the API of MDK by the include file.
+ *  Created on: July 14, 2016
+ *      Author: Alan.Lin
+ *
+ *  Copyright: NexPack Ltd.
+ */
+
+#ifndef NP_MODULE_MDK_V1_H_
+#define NP_MODULE_MDK_V1_H_
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+	extern "C" {
+#endif
+
+typedef void (*my_VOID_UCUC)(uint8_t*, uint8_t);
+typedef void (*app_function)(void);
+
+typedef struct {
+	uint16_t	 	command;
+	my_VOID_UCUC	function;
+} MDK_REGISTER_CMD;
+
+#define MDK_REGISTER_SUCCESS	0x00
+#define MDK_REGISTER_FAILD		0x01
+
+void delay_ms(uint32_t t_ms);
+/*
+ * Description: API to make the app initial by the api
+ * Parameter: np_app_setup-the initial function of APP
+ * Return: null
+ */
+void np_api_setup(app_function np_app_setup);
+
+/*
+ * Description: initialize mdk
+ * Parameter: null
+ * Return: null
+ */
+void np_api_init();
+
+/*
+ * Description: signal ready to start
+ * Parameter: null
+ * Return: null
+ */
+void np_api_start();
+
+/*
+ * Description: check for bootloader request
+ * Parameter: null
+ * Return: null
+ */
+void np_api_bsl_chk();
+
+/*
+ * Description: API to run the loop function of APP, "np_app_loop()" will run on while(1),running forever when software on app mode
+ * Parameter: np_app_loop-the loop function of APP
+ * Return: null
+ */
+void np_api_loop(app_function np_app_loop);
+
+/*
+ * Description: API to set app firmware version
+ * Parameter: null
+ * Return: null
+ */
+void np_api_set_app_version(uint8_t HV, uint8_t MV, uint8_t LV);
+/*
+ * Description: API to register developer's command callback function
+ * Parameter  : 
+ * 		cmd_func_table:the callback function about the command. 
+ *			  		   The callback function will be called when MDK get the corresponding command. 
+ *		num           :The callback function number
+ * Return     : 0-success;  1-fail
+ */
+uint8_t np_api_register(MDK_REGISTER_CMD* cmd_func_table, uint8_t num);
+
+/*
+ * Description: API to upload data to Phone
+ * Parameter: 
+ *		rcmd : The command of the message.
+ *		pData: Pointer of the space for hold the parameter of the message.
+ *		pLen : The length of the "pData"
+ * Return    : 0-success;  1-fail
+ */
+uint8_t np_api_upload(uint16_t rcmd,uint8_t *pData, uint8_t pLen);
+
+/*
+ * Description: API to upload data to Gateway
+ *		rcmd : The command of the message.
+ *		pData: Pointer of the space for hold the parameter of the message.
+ *		pLen : The length of the "pData"
+ * Return    : 0-success;  1-fail
+ */
+uint8_t np_api_upload_to_station(uint16_t rcmd, uint8_t *pData, uint8_t pLen);
+
+/*
+ * Description: API to set a manually output address for next POST message
+ * Parameter: address-the source address of next message
+ * Return: null
+ */
+void np_api_set_post_address(uint8_t address);
+
+#ifdef __cplusplus
+	}
+#endif
+
+#endif /* NP_MODULE_MDK_V1_H_ */
+