Nanostack Border Router is a generic mbed border router implementation that provides the 6LoWPAN ND or Thread border router initialization logic.
configs/Thread_SLIP_Atmel_RF.json
- Committer:
- mbed_official
- Date:
- 2019-11-27
- Revision:
- 108:0c14bd1d3334
- Parent:
- 105:d9f83743ed4f
File content as of revision 108:0c14bd1d3334:
{ "config": { "radio-type":{ "help": "options are ATMEL, MCR20", "value": "ATMEL" }, "backhaul-driver": { "help": "options are ETH, SLIP, EMAC, CELL", "value": "SLIP" }, "mesh-mode": { "help": "Mesh networking mode. Options are LOWPAN_ND and THREAD", "value": "THREAD" }, "backhaul-mac-src": { "help": "Where to get EUI48 address. Options are BOARD, CONFIG", "value": "BOARD" }, "backhaul-mld": { "help": "Enable proxying Multicast Listener Discovery messages to backhaul network", "value": "false" }, "nanostack_extended_heap": { "help": "Add additional memory region to nanostack heap. Valid only for selected platforms. Region size may vary depending of the toolchain.", "value": false }, "backhaul-mac": "{0x02, 0x00, 0x00, 0x00, 0x00, 0x01}", "slip_hw_flow_control": "true", "slip_serial_baud_rate": "921600", "rf-channel": 22, "rf-channel-page": 0, "rf-channel-mask": "0x07fff800", "debug-trace": 1, "backhaul-dynamic-bootstrap": true, "backhaul-prefix": "\"fd00:300::\"", "backhaul-next-hop": "\"fe80::1\"", "backhaul-default-route": "\"::/0\"", "commissioning-dataset-timestamp": "0x00010000", "pan-id": "0x0700", "extended-pan-id": "{0xf1, 0xb5, 0xa1, 0xb2,0xc4, 0xd5, 0xa1, 0xbd }", "mesh-local-prefix": "{0xfd, 0x0, 0x0d, 0xb8, 0x0, 0x0, 0x0, 0x0}", "network-name": "\"Thread Network\"", "pskd": "\"ABCDEFGH\"", "pskc": "{0xc8, 0xa6, 0x2e, 0xae, 0xf3, 0x68, 0xf3, 0x46, 0xa9, 0x9e, 0x57, 0x85, 0x98, 0x9d, 0x1c, 0xd0}", "thread-master-key": "{0x10, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff}", "thread-use-static-link-config": true, "thread-security-policy": 255, "LED": "NC", "SERIAL_TX": "NC", "SERIAL_RX": "NC", "SERIAL_CTS": "NC", "SERIAL_RTS": "NC" }, "macros": ["MBEDTLS_USER_CONFIG_FILE=\"source/mbedtls_thread_config.h\"", "ATMEL_SPI_RST=PTD4"], "target_overrides": { "*": { "target.network-default-interface-type": "ETHERNET", "nsapi.default-stack": "NANOSTACK", "mbed-trace.enable": 1, "nanostack.configuration": "thread_border_router", "platform.stdio-convert-newlines": true, "platform.stdio-baud-rate": 115200, "mbed-mesh-api.heap-size": 65535, "mbed-mesh-api.heap-stat-info": "&memory_heap_stat", "mbed-mesh-api.heap-stat-info-definition": "mem_stat_t memory_heap_stat;" }, "K64F": { "LED": "LED_GREEN", "SERIAL_TX": "PTE0", "SERIAL_RX": "PTE1", "SERIAL_CTS": "PTE2", "SERIAL_RTS": "PTE3" }, "K66F": { "LED": "LED_GREEN" } } }