A quick example of a simple WiFi application using the WiFi and network-socket APIs that is provided as a part of mbed-os.
The program brings up the WiFi and the underlying network interface, and uses it to scans available networks, connects to a network, prints interface and connection details and performs simple HTTP operation.
Supported hardware:
- UBLOX Odin board built-in WiFi module
- REALTEK_RTL8195AM built-in WiFi module
- NUCLEO_F401RE with X-NUCLEO-IDW01M1 WiFi expansion board using pins D8 D2
- NUCLEO_F429ZI with ESP8266-01 module using pins D1 D0
- NUCLEO_L476RG with ESP8266-01 module using pins D8 D2
- Other mbed targets with ESP8266 module or X-NUCLEO-IDW01M1 expansion board
Not that the mbed target board the WiFi shield gets connected to shouldn't have any other network interface e.g. Ethernet.
ESP8266 is a fallback option and will be used if the build is for unsupported platform.
Diff: README.md
- Revision:
- 6:9944c5308062
- Parent:
- 0:857719181846
- Child:
- 10:5b5beb106156
--- a/README.md Wed Nov 23 13:00:04 2016 +0000 +++ b/README.md Fri Dec 09 11:15:04 2016 +0000 @@ -15,6 +15,14 @@ ESP2866 is a fallback option and will be used if the build is for unsupported platform. +#### Connecting the ESP2866 #### + +ESP module needs to be connected to RX and TX UART pins (+ power and ground) on your target board. That can be achieved using Grove shield or connected directly using jumper wires, please note that not all Arduino form factor boards have UART compatible with the Grove shiled. + +For Grove shield TX has to be connected to D1 and RX to D0. + +Make sure that UART module you're connecting ESP to is different than the debug UART connected to your USB port. + ## Getting started 1. Import the example