mbed-os-examples / Mbed OS mbed-os-example-mbed5-blinky Featured

This is a very simple guide, reviewing the steps required to get Blinky working on an Mbed OS platform.

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. mbed OS Blinky
  2. Building this example

mbed OS Blinky

This example shows the use of a DigitalOut object to represent an LED and use of the nonblocking Thread::wait() call. Using nonblocking calls is good practice because mbed OS can schedule and run other threads while the first thread is waiting.

Building this example

Building with mbed CLI

To use mbed CLI to build this example, follow the instructions in the Handbook. The instructions here relate to using the os.mbed.com Online Compiler.

To use the Online Compiler, import this code into the Online Compiler, and select your platform from the top right. Compile the code using the compile button, load it onto your board, and press the reset button on the board. The code will run on the board, and you will see the LED blink.

You can find more instructions for using the mbed Online Compiler in the Handbook.

All wikipages