Components
Tests for the ESP8266Interface running Espressif Firmware
Dependencies: ESP8266Interface NSAPITests NetworkSocketAPI mbed
Fork of
ESP8266InterfaceTests
by 
NetworkSocketAPI
Note
This example code assumes your ESP8266 is running the Espressif Firmware. For instructions on how to update your ESP8266 to use the correct firmware see the Firmware Update Wiki Page.
Revision 0:99f47847188c, committed 2016-03-03
- Comitter:
- bridadan
- Date:
- Thu Mar 03 21:10:26 2016 +0000
- Child:
- 1:be56c18eabec
- Commit message:
- Initial commit
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/ESP8266Interface.lib Thu Mar 03 21:10:26 2016 +0000 @@ -0,0 +1,1 @@ +https://developer.mbed.org/teams/NetworkSocketAPI/code/ESP8266Interface/#42441dd2093e
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/NSAPITests.lib Thu Mar 03 21:10:26 2016 +0000 @@ -0,0 +1,1 @@ +https://developer.mbed.org/teams/NetworkSocketAPI/code/NSAPITests/#07b22947be75
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/NetworkSocketAPI.lib Thu Mar 03 21:10:26 2016 +0000 @@ -0,0 +1,1 @@ +https://developer.mbed.org/teams/NetworkSocketAPI/code/NetworkSocketAPI/#543799d6472e
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Thu Mar 03 21:10:26 2016 +0000
@@ -0,0 +1,35 @@
+/* NetworkSocketAPI Example Program
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed.h"
+#include "ESP8266Interface.h"
+#include "NSAPITests.h"
+
+ESP8266Interface iface(D1, D0);
+
+int main()
+{
+ int32_t result = iface.connect("ssid", "password");
+
+ if (result) {
+ printf("Interface failed to connect with code %d\r\n", result);
+ } else {
+ nsapi_tests("ESP8266Interface Tests", &iface, "0.0.0.0", 4000);
+ iface.disconnect();
+ }
+ while(1) {
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Thu Mar 03 21:10:26 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/87f2f5183dfb \ No newline at end of file